mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 10

Question 90

An operations team recovers a backup of the controller taken before the most recent fabric changes. Which evidence most directly verifies the intended network outcome?

  1. Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.
  2. Confirm the server receives fresh device state and reconciles inventory and blueprint expectations.
  3. Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint.
  4. Confirm intended and running configurations are consistent and the fabric's critical paths remain operational.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm intended and running configurations are consistent and the fabric's critical paths remain operational. The decisive investigation is to compare the restored controller state against live device configuration and the latest known approved revision. The governing principle is that the controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore.

Incorrect Answers

A:

That choice—“Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied”—addresses this other problem: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Here the scenario is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

B:

“Confirm the server receives fresh device state and reconciles inventory and blueprint expectations” is associated with a distinct issue: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. By contrast, the actual problem is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

C:

The option “Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint” is useful in a different setting: A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. The case being tested is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

Question 91

Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Which shortcut would be most likely to undermine this objective?

  1. Configure the same unrestricted import policy for every tenant just because route distinguishers differ.
  2. Treat the two legs of a multihomed Ethernet segment as unrelated unmanaged single-homed endpoints.
  3. Try to solve missing host MAC advertisements solely by creating unrelated Type 5 subnet prefixes.
  4. Disable tenant-specific route import controls globally as a quick way to make MAC routes appear.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: disable tenant-specific route import controls globally as a quick way to make MAC routes appear. It violates the principle that matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. An appropriate alternative is to correct the intended route target mapping and import policies while preserving tenant isolation.

Incorrect Answers

A:

“Configure the same unrestricted import policy for every tenant just because route distinguishers differ” is relevant to a different condition: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. The stated question instead concerns: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The directly relevant unsafe shortcut is “Disable tenant-specific route import controls globally as a quick way to make MAC routes appear”.

B:

That choice—“Treat the two legs of a multihomed Ethernet segment as unrelated unmanaged single-homed endpoints”—addresses this other problem: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. Here the scenario is: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The directly relevant unsafe shortcut is “Disable tenant-specific route import controls globally as a quick way to make MAC routes appear”.

C:

“Try to solve missing host MAC advertisements solely by creating unrelated Type 5 subnet prefixes” is associated with a distinct issue: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. By contrast, the actual problem is: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The directly relevant unsafe shortcut is “Disable tenant-specific route import controls globally as a quick way to make MAC routes appear”.

Question 92

A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Which design or operational principle best explains this behavior?

  1. Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity.
  2. Managed VNI and other logical resource pools reduce collision risk when correctly partitioned and allocated.
  3. Resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers.
  4. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details.

Explanation

Correct Answer

D:

logical device definitions represent required interface roles and capacities, independent of hardware SKU details. Here, a site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. A useful discriminating check is to compare the selected logical device's interface count, speeds and connection roles with rack requirements.

Incorrect Answers

A:

The option “Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity” is useful in a different setting: An automation wants to select switches tagged with a particular site and deployment tier. The case being tested is: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The controlling principle is “Logical device definitions represent required interface roles and capacities, independent of hardware SKU details”.

B:

“Managed VNI and other logical resource pools reduce collision risk when correctly partitioned and allocated” is relevant to a different condition: A data center creates two tenants with conflicting VNI allocations despite using a shared Apstra resource service. The stated question instead concerns: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The controlling principle is “Logical device definitions represent required interface roles and capacities, independent of hardware SKU details”.

C:

That choice—“Resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers”—addresses this other problem: A new blueprint assigns every VTEP from a resource pool that is too small for the proposed rack count. Here the scenario is: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The controlling principle is “Logical device definitions represent required interface roles and capacities, independent of hardware SKU details”.

Question 93

A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. Which initial check would most directly distinguish the likely cause?

  1. Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent.
  2. Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods.
  3. Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability.
  4. Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The underlying concept is that a VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership. After confirming the finding, a controlled remediation is to restore routed reachability to the advertised VTEP and the correct tunnel forwarding state.

Incorrect Answers

A:

“Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent” is associated with a distinct issue: A rack migration assigns the correct switch access VLAN but places the VTEP into another tenant's virtual network identifier. By contrast, the actual problem is: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. The relevant inspection is: Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The most discriminating first check is “Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability”.

B:

The option “Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods” is useful in a different setting: An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. The case being tested is: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. The relevant inspection is: Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The most discriminating first check is “Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability”.

D:

That choice—“Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs”—addresses this other problem: A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. Here the scenario is: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. The relevant inspection is: Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The most discriminating first check is “Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability”.

Question 94

An operator sees a tenant-service warning while physical switch availability indicators remain green. Which shortcut would be most likely to undermine this objective?

  1. Reboot every leaf because all anomaly types allegedly mean the same physical fault.
  2. Dismiss all service anomalies merely because the underlying physical links are up.
  3. Delete the probe because no service-configuration mismatch appears on the dashboard.
  4. Identify tenant networks solely from informal naming conventions and ignore their actual graph relationships.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: dismiss all service anomalies merely because the underlying physical links are up. It violates the principle that an Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. An appropriate alternative is to correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation.

Incorrect Answers

A:

That choice—“Reboot every leaf because all anomaly types allegedly mean the same physical fault”—addresses this other problem: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. Here the scenario is: An operator sees a tenant-service warning while physical switch availability indicators remain green. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The directly relevant unsafe shortcut is “Dismiss all service anomalies merely because the underlying physical links are up”.

C:

The option “Delete the probe because no service-configuration mismatch appears on the dashboard” is useful in a different setting: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. The case being tested is: An operator sees a tenant-service warning while physical switch availability indicators remain green. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The directly relevant unsafe shortcut is “Dismiss all service anomalies merely because the underlying physical links are up”.

D:

“Identify tenant networks solely from informal naming conventions and ignore their actual graph relationships” is relevant to a different condition: A team wants to locate every virtual network owned by a particular application during a migration. The stated question instead concerns: An operator sees a tenant-service warning while physical switch availability indicators remain green. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The directly relevant unsafe shortcut is “Dismiss all service anomalies merely because the underlying physical links are up”.

Question 95

A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. Which controlled change best addresses the described requirement?

  1. Apply a supported interface map that binds each logical fabric role to the intended physical port.
  2. Choose a compatible interface map or adjust the approved breakout and device profile.
  3. Use a compatible logical device and device profile combination with sufficient supported host ports.
  4. Reallocate the conflicting interface roles to separate supported physical ports.

Explanation

Correct Answer

D:

This action addresses the stated defect: reallocate the conflicting interface roles to separate supported physical ports. The underlying constraint is that a physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint. Verify rather than assume success: confirm the design validator has no duplicate port assignments and each link role maps to the intended connector.

Incorrect Answers

A:

“Apply a supported interface map that binds each logical fabric role to the intended physical port” is relevant to a different condition: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. The stated question instead concerns: A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. Reallocate the conflicting interface roles to separate supported physical ports. The most relevant correction is “Reallocate the conflicting interface roles to separate supported physical ports”.

B:

That choice—“Choose a compatible interface map or adjust the approved breakout and device profile”—addresses this other problem: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Here the scenario is: A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. Reallocate the conflicting interface roles to separate supported physical ports. The most relevant correction is “Reallocate the conflicting interface roles to separate supported physical ports”.

C:

“Use a compatible logical device and device profile combination with sufficient supported host ports” is associated with a distinct issue: A rack template chooses a logical device with insufficient server ports for its planned generic systems. By contrast, the actual problem is: A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. Reallocate the conflicting interface roles to separate supported physical ports. The most relevant correction is “Reallocate the conflicting interface roles to separate supported physical ports”.

Question 96

A blueprint uses a template intended for a different network OS and generated configuration contains unsupported syntax. Which design or operational principle best explains this behavior?

  1. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination.
  2. Blueprint design intent must model necessary fabric roles and external connectivity before deployment.
  3. Design-phase resource and topology validation must succeed before a controlled deployment can be trusted.
  4. Blueprint design inheritance and change management must be validated; editing a design object does not prove all deployed fabrics changed.

Explanation

Correct Answer

A:

blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. Here, a blueprint uses a template intended for a different network OS and generated configuration contains unsupported syntax. A useful discriminating check is to inspect selected template, interface map, device profile and advertised NOS capabilities.

Incorrect Answers

B:

“Blueprint design intent must model necessary fabric roles and external connectivity before deployment” is relevant to a different condition: An engineer finishes a fabric template without any modeled north-south peering attachment points. The stated question instead concerns: A blueprint uses a template intended for a different network OS and generated configuration contains unsupported syntax. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The controlling principle is “Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination”.

C:

That choice—“Design-phase resource and topology validation must succeed before a controlled deployment can be trusted”—addresses this other problem: A new blueprint shows red validation errors before any managed device has received configuration. Here the scenario is: A blueprint uses a template intended for a different network OS and generated configuration contains unsupported syntax. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The controlling principle is “Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination”.

D:

“Blueprint design inheritance and change management must be validated; editing a design object does not prove all deployed fabrics changed” is associated with a distinct issue: A reference template changes its interface model after three production blueprints have already deployed. By contrast, the actual problem is: A blueprint uses a template intended for a different network OS and generated configuration contains unsupported syntax. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The controlling principle is “Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination”.

Question 97

A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. Which initial check would most directly distinguish the likely cause?

  1. Inspect installed ECMP next hops and compare per-link counters across multiple distinct flows.
  2. Check interface state, routing convergence and forwarding entries following the simulated spine-link loss.
  3. Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints.
  4. Inspect routing tables and underlay advertisements for each intended VTEP address.

Explanation

Correct Answer

B:

This checks the relevant evidence first: check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The underlying concept is that path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. After confirming the finding, a controlled remediation is to correct underlay failure detection and routing convergence within the approved topology and timer policy.

Incorrect Answers

A:

“Inspect installed ECMP next hops and compare per-link counters across multiple distinct flows” is associated with a distinct issue: A customer asks why adding a second spine path does not necessarily double the rate of one elephant-flow TCP session. By contrast, the actual problem is: A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. The relevant inspection is: Check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The most discriminating first check is “Check interface state, routing convergence and forwarding entries following the simulated spine-link loss”.

C:

“Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints” is relevant to a different condition: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. The stated question instead concerns: A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. The relevant inspection is: Check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The most discriminating first check is “Check interface state, routing convergence and forwarding entries following the simulated spine-link loss”.

D:

That choice—“Inspect routing tables and underlay advertisements for each intended VTEP address”—addresses this other problem: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. Here the scenario is: A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. The relevant inspection is: Check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The most discriminating first check is “Check interface state, routing convergence and forwarding entries following the simulated spine-link loss”.

Question 98

An operations dashboard must report which workload attachments inherit a specific project label. Which design or operational principle best explains this behavior?

  1. Graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation.
  2. Apstra graph queries can combine object attributes and topological relationships for precise selection.
  3. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint.
  4. Graph and probe context can correlate multiple anomalies to a shared physical or logical source.

Explanation

Correct Answer

B:

Apstra graph queries can combine object attributes and topological relationships for precise selection. Here, an operations dashboard must report which workload attachments inherit a specific project label. A useful discriminating check is to test a query for tag attributes and related generic-system attachments in the target blueprint.

Incorrect Answers

A:

That choice—“Graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation”—addresses this other problem: An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. Here the scenario is: An operations dashboard must report which workload attachments inherit a specific project label. Apstra graph queries can combine object attributes and topological relationships for precise selection. The controlling principle is “Apstra graph queries can combine object attributes and topological relationships for precise selection”.

C:

The option “Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint” is useful in a different setting: An analyst wants to find all uplinks belonging to a specific rack while avoiding assumptions based on interface names. The case being tested is: An operations dashboard must report which workload attachments inherit a specific project label. Apstra graph queries can combine object attributes and topological relationships for precise selection. The controlling principle is “Apstra graph queries can combine object attributes and topological relationships for precise selection”.

D:

“Graph and probe context can correlate multiple anomalies to a shared physical or logical source” is relevant to a different condition: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. The stated question instead concerns: An operations dashboard must report which workload attachments inherit a specific project label. Apstra graph queries can combine object attributes and topological relationships for precise selection. The controlling principle is “Apstra graph queries can combine object attributes and topological relationships for precise selection”.

Question 99

A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Which initial check would most directly distinguish the likely cause?

  1. Review logical-to-physical interface mappings and device profile nomenclature for the new platform.
  2. Inspect the interface map and assigned logical device port roles for overlapping reservations.
  3. Compare the selected logical device's interface count, speeds and connection roles with rack requirements.
  4. Compare the selected hardware profile, breakout mode and logical interface requirements before deploying.

Explanation

Correct Answer

D:

This checks the relevant evidence first: compare the selected hardware profile, breakout mode and logical interface requirements before deploying. The underlying concept is that interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity. After confirming the finding, a controlled remediation is to choose a compatible interface map or adjust the approved breakout and device profile.

Incorrect Answers

A:

“Review logical-to-physical interface mappings and device profile nomenclature for the new platform” is relevant to a different condition: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. The stated question instead concerns: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. The relevant inspection is: Compare the selected hardware profile, breakout mode and logical interface requirements before deploying. The most discriminating first check is “Compare the selected hardware profile, breakout mode and logical interface requirements before deploying”.

B:

That choice—“Inspect the interface map and assigned logical device port roles for overlapping reservations”—addresses this other problem: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. Here the scenario is: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. The relevant inspection is: Compare the selected hardware profile, breakout mode and logical interface requirements before deploying. The most discriminating first check is “Compare the selected hardware profile, breakout mode and logical interface requirements before deploying”.

C:

“Compare the selected logical device's interface count, speeds and connection roles with rack requirements” is associated with a distinct issue: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. By contrast, the actual problem is: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. The relevant inspection is: Compare the selected hardware profile, breakout mode and logical interface requirements before deploying. The most discriminating first check is “Compare the selected hardware profile, breakout mode and logical interface requirements before deploying”.

Question 100

Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. Which evidence most directly verifies the intended network outcome?

  1. Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated.
  2. Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF.
  3. Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs.
  4. Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked.

Explanation

Correct Answer

C:

This directly tests the desired result: confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs. The decisive investigation is to inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes. The governing principle is that Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design.

Incorrect Answers

A:

The option “Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated” is useful in a different setting: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. The case being tested is: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design. The direct acceptance evidence is “Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs”.

B:

“Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF” is relevant to a different condition: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. The stated question instead concerns: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design. The direct acceptance evidence is “Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs”.

D:

“Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked” is associated with a distinct issue: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. By contrast, the actual problem is: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design. The direct acceptance evidence is “Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests