mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 79

Question 780

A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Which design or operational principle best explains this behavior?

  1. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites.
  2. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service.
  3. Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries.
  4. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation.

Explanation

Correct Answer

D:

shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. Here, a data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. A useful discriminating check is to inspect the proposed external or shared-services routing path, import policy and required security controls.

Incorrect Answers

A:

The option “DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites” is useful in a different setting: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The case being tested is: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. The controlling principle is “Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation”.

B:

“Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service” is relevant to a different condition: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. The stated question instead concerns: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. The controlling principle is “Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation”.

C:

That choice—“Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries”—addresses this other problem: A route export template applied to a border device advertises all tenant prefixes beyond the data center. Here the scenario is: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. The controlling principle is “Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation”.

Question 781

An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. Which shortcut would be most likely to undermine this objective?

  1. Treat absence of a service configuration anomaly as proof that every application performance metric is normal.
  2. Declare recovery solely from a green dashboard after suppressing all probe alerts.
  3. Disable all analytics probes because several symptoms share the same source device.
  4. Disable interface telemetry to suppress alerts caused by rising packet errors.

Explanation

Correct Answer

C:

This is the unsafe shortcut to avoid: disable all analytics probes because several symptoms share the same source device. It violates the principle that graph and probe context can correlate multiple anomalies to a shared physical or logical source. An appropriate alternative is to repair the verified common uplink fault and retain alert history for root-cause analysis.

Incorrect Answers

A:

“Treat absence of a service configuration anomaly as proof that every application performance metric is normal” is associated with a distinct issue: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. By contrast, the actual problem is: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. Graph and probe context can correlate multiple anomalies to a shared physical or logical source. The directly relevant unsafe shortcut is “Disable all analytics probes because several symptoms share the same source device”.

B:

The option “Declare recovery solely from a green dashboard after suppressing all probe alerts” is useful in a different setting: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. The case being tested is: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. Graph and probe context can correlate multiple anomalies to a shared physical or logical source. The directly relevant unsafe shortcut is “Disable all analytics probes because several symptoms share the same source device”.

D:

That choice—“Disable interface telemetry to suppress alerts caused by rising packet errors”—addresses this other problem: A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. Here the scenario is: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. Graph and probe context can correlate multiple anomalies to a shared physical or logical source. The directly relevant unsafe shortcut is “Disable all analytics probes because several symptoms share the same source device”.

Question 782

A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Which controlled change best addresses the described requirement?

  1. Grant the minimum documented blueprint role permissions through the approved access-review process.
  2. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.
  3. Select a supported device and image combination and complete controlled onboarding checks.
  4. Use the documented recovery and reconciliation procedure before attempting broad deployment changes.

Explanation

Correct Answer

A:

This action addresses the stated defect: grant the minimum documented blueprint role permissions through the approved access-review process. The underlying constraint is that Apstra role-based access control separates read visibility from permissions to change managed fabric objects. Verify rather than assume success: confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.

Incorrect Answers

B:

“Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits” is associated with a distinct issue: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. By contrast, the actual problem is: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Grant the minimum documented blueprint role permissions through the approved access-review process. The most relevant correction is “Grant the minimum documented blueprint role permissions through the approved access-review process”.

C:

The option “Select a supported device and image combination and complete controlled onboarding checks” is useful in a different setting: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. The case being tested is: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Grant the minimum documented blueprint role permissions through the approved access-review process. The most relevant correction is “Grant the minimum documented blueprint role permissions through the approved access-review process”.

D:

“Use the documented recovery and reconciliation procedure before attempting broad deployment changes” is relevant to a different condition: An operations team recovers a backup of the controller taken before the most recent fabric changes. The stated question instead concerns: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Grant the minimum documented blueprint role permissions through the approved access-review process. The most relevant correction is “Grant the minimum documented blueprint role permissions through the approved access-review process”.

Question 783

An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. Which shortcut would be most likely to undermine this objective?

  1. Ignore LLDP mismatches because link LEDs are illuminated.
  2. Swap arbitrary port assignments in production without reviewing topology role requirements.
  3. Skip diff review and declare the change complete as soon as the design editor saves it.
  4. Mark the whole deployment complete when a single leaf reports success.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: mark the whole deployment complete when a single leaf reports success. It violates the principle that per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly. An appropriate alternative is to resolve the specific failed device deployment and reapply the approved configuration to that device.

Incorrect Answers

A:

“Ignore LLDP mismatches because link LEDs are illuminated” is relevant to a different condition: A newly staged fabric reports LLDP neighbor mismatches although physical links are up. The stated question instead concerns: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. Per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly. The directly relevant unsafe shortcut is “Mark the whole deployment complete when a single leaf reports success”.

B:

That choice—“Swap arbitrary port assignments in production without reviewing topology role requirements”—addresses this other problem: An Apstra blueprint expects a set of spine interfaces but physical inventory maps uplinks to different ports. Here the scenario is: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. Per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly. The directly relevant unsafe shortcut is “Mark the whole deployment complete when a single leaf reports success”.

C:

“Skip diff review and declare the change complete as soon as the design editor saves it” is associated with a distinct issue: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. By contrast, the actual problem is: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. Per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly. The directly relevant unsafe shortcut is “Mark the whole deployment complete when a single leaf reports success”.

Question 784

A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. Which controlled change best addresses the described requirement?

  1. Select a supported device and image combination and complete controlled onboarding checks.
  2. Restore the supported device-agent connection and management credentials without bypassing security checks.
  3. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.
  4. Grant the minimum documented blueprint role permissions through the approved access-review process.

Explanation

Correct Answer

B:

This action addresses the stated defect: restore the supported device-agent connection and management credentials without bypassing security checks. The underlying constraint is that the Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model. Verify rather than assume success: confirm the server receives fresh device state and reconciles inventory and blueprint expectations.

Incorrect Answers

A:

The option “Select a supported device and image combination and complete controlled onboarding checks” is useful in a different setting: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. The case being tested is: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. Restore the supported device-agent connection and management credentials without bypassing security checks. The most relevant correction is “Restore the supported device-agent connection and management credentials without bypassing security checks”.

C:

That choice—“Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits”—addresses this other problem: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Here the scenario is: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. Restore the supported device-agent connection and management credentials without bypassing security checks. The most relevant correction is “Restore the supported device-agent connection and management credentials without bypassing security checks”.

D:

“Grant the minimum documented blueprint role permissions through the approved access-review process” is associated with a distinct issue: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. By contrast, the actual problem is: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. Restore the supported device-agent connection and management credentials without bypassing security checks. The most relevant correction is “Restore the supported device-agent connection and management credentials without bypassing security checks”.

Question 785

A newly staged fabric reports LLDP neighbor mismatches although physical links are up. Which initial check would most directly distinguish the likely cause?

  1. Review the intended cable-map endpoints, device identities and actual discovered LLDP neighbors.
  2. Check each device's state, failed action details and intended-versus-running configuration revision.
  3. Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map.
  4. Inspect the device-agent state, management authentication and discovered system ID before allocation.

Explanation

Correct Answer

C:

This checks the relevant evidence first: compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map. The underlying concept is that cabling validation compares observed neighbor links against intended device/interface relationships. After confirming the finding, a controlled remediation is to correct physical cabling or update the approved design only after confirming the intended topology.

Incorrect Answers

A:

“Review the intended cable-map endpoints, device identities and actual discovered LLDP neighbors” is associated with a distinct issue: An Apstra blueprint expects a set of spine interfaces but physical inventory maps uplinks to different ports. By contrast, the actual problem is: A newly staged fabric reports LLDP neighbor mismatches although physical links are up. The relevant inspection is: Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map. The most discriminating first check is “Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map”.

B:

The option “Check each device's state, failed action details and intended-versus-running configuration revision” is useful in a different setting: A new switch reports Ready while its peers remain in a deployment-failed state after committing fabric intent. The case being tested is: A newly staged fabric reports LLDP neighbor mismatches although physical links are up. The relevant inspection is: Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map. The most discriminating first check is “Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map”.

D:

That choice—“Inspect the device-agent state, management authentication and discovered system ID before allocation”—addresses this other problem: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Here the scenario is: A newly staged fabric reports LLDP neighbor mismatches although physical links are up. The relevant inspection is: Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map. The most discriminating first check is “Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map”.

Question 786

Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. Which evidence most directly verifies the intended network outcome?

  1. Confirm routing takes the intended local leaf path and remote tenant prefixes remain correctly reachable.
  2. Confirm local first-hop forwarding and cross-rack routing continue consistently through each attached leaf.
  3. Confirm both host resolution and inter-subnet routed reachability use the expected EVPN routes.
  4. Confirm stable multihoming advertisements and appropriate forwarding when each server attachment is tested.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm local first-hop forwarding and cross-rack routing continue consistently through each attached leaf. The decisive investigation is to compare gateway addresses, virtual MAC policy and SVI-to-VNI intent across the affected leafs. The governing principle is that a distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices.

Incorrect Answers

A:

That choice—“Confirm routing takes the intended local leaf path and remote tenant prefixes remain correctly reachable”—addresses this other problem: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. Here the scenario is: Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. A distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices. The direct acceptance evidence is “Confirm local first-hop forwarding and cross-rack routing continue consistently through each attached leaf”.

C:

The option “Confirm both host resolution and inter-subnet routed reachability use the expected EVPN routes” is useful in a different setting: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. The case being tested is: Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. A distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices. The direct acceptance evidence is “Confirm local first-hop forwarding and cross-rack routing continue consistently through each attached leaf”.

D:

“Confirm stable multihoming advertisements and appropriate forwarding when each server attachment is tested” is relevant to a different condition: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. The stated question instead concerns: Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. A distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices. The direct acceptance evidence is “Confirm local first-hop forwarding and cross-rack routing continue consistently through each attached leaf”.

Question 787

A data center needs to add another rack to a production fabric without replacing the existing blueprint. Which shortcut would be most likely to undermine this objective?

  1. Create the new rack outside the blueprint so its configurations cannot be tracked centrally.
  2. Treat every difference between a pristine config and final rendered config as an unauthorized attack.
  3. Treat unmanaged server ports as invisible and configure arbitrary switch interfaces by hand.
  4. Jump to an old revision without checking uncommitted changes or notifying their owners.

Explanation

Correct Answer

A:

This is the unsafe shortcut to avoid: create the new rack outside the blueprint so its configurations cannot be tracked centrally. It violates the principle that Apstra supports controlled blueprint day-two rack additions using supported rack types, resources and spine capacity. An appropriate alternative is to stage the new rack, assign valid devices and resources, validate, then commit through change control.

Incorrect Answers

B:

That choice—“Treat every difference between a pristine config and final rendered config as an unauthorized attack”—addresses this other problem: A network engineer sees differences among the pristine, incremental and rendered configurations for a managed leaf. Here the scenario is: A data center needs to add another rack to a production fabric without replacing the existing blueprint. Apstra supports controlled blueprint day-two rack additions using supported rack types, resources and spine capacity. The directly relevant unsafe shortcut is “Create the new rack outside the blueprint so its configurations cannot be tracked centrally”.

C:

“Treat unmanaged server ports as invisible and configure arbitrary switch interfaces by hand” is associated with a distinct issue: An operations team adds a hypervisor pair whose access ports are not modeled in Apstra generic-system inventory. By contrast, the actual problem is: A data center needs to add another rack to a production fabric without replacing the existing blueprint. Apstra supports controlled blueprint day-two rack additions using supported rack types, resources and spine capacity. The directly relevant unsafe shortcut is “Create the new rack outside the blueprint so its configurations cannot be tracked centrally”.

D:

The option “Jump to an old revision without checking uncommitted changes or notifying their owners” is useful in a different setting: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. The case being tested is: A data center needs to add another rack to a production fabric without replacing the existing blueprint. Apstra supports controlled blueprint day-two rack additions using supported rack types, resources and spine capacity. The directly relevant unsafe shortcut is “Create the new rack outside the blueprint so its configurations cannot be tracked centrally”.

Question 788

A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Which controlled change best addresses the described requirement?

  1. Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review.
  2. Complete review and commit of the authorized staged change, then monitor device convergence.
  3. Separate, revert or review unrelated staged edits before an authorized commit according to process.
  4. Stage the new rack, assign valid devices and resources, validate, then commit through change control.

Explanation

Correct Answer

B:

This action addresses the stated defect: complete review and commit of the authorized staged change, then monitor device convergence. The underlying constraint is that staged blueprint intent can differ from the deployed active revision until approved changes are committed. Verify rather than assume success: observe the updated active blueprint and running device configuration reflect the approved new virtual network.

Incorrect Answers

A:

The option “Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review” is useful in a different setting: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. The case being tested is: A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Complete review and commit of the authorized staged change, then monitor device convergence. The most relevant correction is “Complete review and commit of the authorized staged change, then monitor device convergence”.

C:

That choice—“Separate, revert or review unrelated staged edits before an authorized commit according to process”—addresses this other problem: A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. Here the scenario is: A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Complete review and commit of the authorized staged change, then monitor device convergence. The most relevant correction is “Complete review and commit of the authorized staged change, then monitor device convergence”.

D:

“Stage the new rack, assign valid devices and resources, validate, then commit through change control” is associated with a distinct issue: An organization expands a Clos topology and wants newly created racks to inherit validated patterns and allocations. By contrast, the actual problem is: A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Complete review and commit of the authorized staged change, then monitor device convergence. The most relevant correction is “Complete review and commit of the authorized staged change, then monitor device convergence”.

Question 789

A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. Which design or operational principle best explains this behavior?

  1. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation.
  2. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service.
  3. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design.
  4. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites.

Explanation

Correct Answer

D:

DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites. Here, a data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. A useful discriminating check is to inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements.

Incorrect Answers

A:

“Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation” is associated with a distinct issue: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. By contrast, the actual problem is: A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites. The controlling principle is “DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites”.

B:

The option “Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service” is useful in a different setting: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. The case being tested is: A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites. The controlling principle is “DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites”.

C:

“Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design” is relevant to a different condition: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. The stated question instead concerns: A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites. The controlling principle is “DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites”.

Question 790

A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Which evidence most directly verifies the intended network outcome?

  1. Confirm topology validation succeeds and the planned rack connections fit the chosen design.
  2. Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions.
  3. Prove design-stage topology and resource validation before committing to hardware procurement.
  4. Confirm the modeled external links and routing connectivity satisfy the acceptance topology.

Explanation

Correct Answer

C:

This directly tests the desired result: prove design-stage topology and resource validation before committing to hardware procurement. The decisive investigation is to review intended external service connectivity and supported blueprint reference-design capabilities. The governing principle is that reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements.

Incorrect Answers

A:

That choice—“Confirm topology validation succeeds and the planned rack connections fit the chosen design”—addresses this other problem: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. Here the scenario is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The direct acceptance evidence is “Prove design-stage topology and resource validation before committing to hardware procurement”.

B:

“Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions” is associated with a distinct issue: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. By contrast, the actual problem is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The direct acceptance evidence is “Prove design-stage topology and resource validation before committing to hardware procurement”.

D:

“Confirm the modeled external links and routing connectivity satisfy the acceptance topology” is relevant to a different condition: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. The stated question instead concerns: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The direct acceptance evidence is “Prove design-stage topology and resource validation before committing to hardware procurement”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests