mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 78

Question 770

A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. Which initial check would most directly distinguish the likely cause?

  1. Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF.
  2. Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop.
  3. Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs.
  4. Inspect per-VRF and per-virtual-network route target communities and import/export decisions.

Explanation

Correct Answer

B:

This checks the relevant evidence first: inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop. The underlying concept is that EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning. After confirming the finding, a controlled remediation is to repair EVPN endpoint advertisement and import eligibility for the affected virtual network.

Incorrect Answers

A:

That choice—“Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF”—addresses this other problem: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. Here the scenario is: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. The relevant inspection is: Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop. The most discriminating first check is “Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop”.

C:

The option “Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs” is useful in a different setting: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. The case being tested is: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. The relevant inspection is: Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop. The most discriminating first check is “Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop”.

D:

“Inspect per-VRF and per-virtual-network route target communities and import/export decisions” is relevant to a different condition: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. The stated question instead concerns: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. The relevant inspection is: Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop. The most discriminating first check is “Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop”.

Question 771

An Apstra operator sees no current alerts after a telemetry collector became unreachable. Which controlled change best addresses the described requirement?

  1. Preserve audit records and review the specific committed change before a controlled correction.
  2. Configure a supported protected syslog destination with the required log categories and retention policy.
  3. Restore data collection and mark stale measurements as unknown rather than healthy.
  4. Document the causal change and correct the failed deployment through an auditable workflow.

Explanation

Correct Answer

C:

This action addresses the stated defect: restore data collection and mark stale measurements as unknown rather than healthy. The underlying constraint is that monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection. Verify rather than assume success: verify current samples arrive and synthetic test conditions create expected alarms.

Incorrect Answers

A:

“Preserve audit records and review the specific committed change before a controlled correction” is relevant to a different condition: An operator needs to explain who committed a change after a rack lost connectivity overnight. The stated question instead concerns: An Apstra operator sees no current alerts after a telemetry collector became unreachable. Restore data collection and mark stale measurements as unknown rather than healthy. The most relevant correction is “Restore data collection and mark stale measurements as unknown rather than healthy”.

B:

That choice—“Configure a supported protected syslog destination with the required log categories and retention policy”—addresses this other problem: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. Here the scenario is: An Apstra operator sees no current alerts after a telemetry collector became unreachable. Restore data collection and mark stale measurements as unknown rather than healthy. The most relevant correction is “Restore data collection and mark stale measurements as unknown rather than healthy”.

D:

The option “Document the causal change and correct the failed deployment through an auditable workflow” is useful in a different setting: A team needs to identify whether a failed deployment arose from system automation or an approved human change. The case being tested is: An Apstra operator sees no current alerts after a telemetry collector became unreachable. Restore data collection and mark stale measurements as unknown rather than healthy. The most relevant correction is “Restore data collection and mark stale measurements as unknown rather than healthy”.

Question 772

A designer notices an accidental rack parameter change before any blueprint commit has occurred. Which initial check would most directly distinguish the likely cause?

  1. Inspect and preserve or commit required pending modifications before initiating a revision jump.
  2. Inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices.
  3. Inspect historical identifiers, resource assignments, device availability and supported rollback constraints.
  4. Determine whether the unwanted modification exists only in Staged or in the Active revision.

Explanation

Correct Answer

D:

This checks the relevant evidence first: determine whether the unwanted modification exists only in Staged or in the Active revision. The underlying concept is that reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. After confirming the finding, a controlled remediation is to revert the specific uncommitted edit rather than rolling back an unrelated committed revision.

Incorrect Answers

A:

The option “Inspect and preserve or commit required pending modifications before initiating a revision jump” is useful in a different setting: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. The case being tested is: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Determine whether the unwanted modification exists only in Staged or in the Active revision. The most discriminating first check is “Determine whether the unwanted modification exists only in Staged or in the Active revision”.

B:

“Inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices” is relevant to a different condition: A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. The stated question instead concerns: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Determine whether the unwanted modification exists only in Staged or in the Active revision. The most discriminating first check is “Determine whether the unwanted modification exists only in Staged or in the Active revision”.

C:

That choice—“Inspect historical identifiers, resource assignments, device availability and supported rollback constraints”—addresses this other problem: An engineer wants to return to a blueprint commit created before several resource pool and hardware changes. Here the scenario is: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Determine whether the unwanted modification exists only in Staged or in the Active revision. The most discriminating first check is “Determine whether the unwanted modification exists only in Staged or in the Active revision”.

Question 773

A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. Which design or operational principle best explains this behavior?

  1. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope.
  2. IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly.
  3. Apstra IBA probes process collected telemetry against conditions or expectations and can raise anomalies.
  4. Graph and probe context can correlate multiple anomalies to a shared physical or logical source.

Explanation

Correct Answer

A:

an IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. Here, a built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. A useful discriminating check is to inspect the probe stage's graph query, matched entities and input metrics after the migration.

Incorrect Answers

B:

The option “IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly” is useful in a different setting: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The case being tested is: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. The controlling principle is “An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope”.

C:

“Apstra IBA probes process collected telemetry against conditions or expectations and can raise anomalies” is relevant to a different condition: An operator wants an early-warning signal when fabric interface errors exceed a defined threshold. The stated question instead concerns: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. The controlling principle is “An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope”.

D:

That choice—“Graph and probe context can correlate multiple anomalies to a shared physical or logical source”—addresses this other problem: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Here the scenario is: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. The controlling principle is “An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope”.

Question 774

A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. Which design or operational principle best explains this behavior?

  1. Total spine capacity includes available physical ports and supported link-speed and topology constraints.
  2. Rack type and leaf selection must support the intended redundant attachment topology and host interface roles.
  3. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint.
  4. Physical topology diversity is necessary to avoid a common point of failure when rack redundancy is required.

Explanation

Correct Answer

C:

rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. Here, a new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. A useful discriminating check is to inspect rack type properties and compare the proposed rack's connectivity with its validated peers.

Incorrect Answers

A:

That choice—“Total spine capacity includes available physical ports and supported link-speed and topology constraints”—addresses this other problem: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Here the scenario is: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The controlling principle is “Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint”.

B:

“Rack type and leaf selection must support the intended redundant attachment topology and host interface roles” is associated with a distinct issue: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. By contrast, the actual problem is: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The controlling principle is “Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint”.

D:

“Physical topology diversity is necessary to avoid a common point of failure when rack redundancy is required” is relevant to a different condition: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The stated question instead concerns: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The controlling principle is “Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint”.

Question 775

A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Which design or operational principle best explains this behavior?

  1. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly.
  2. Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops.
  3. In a conventional Clos IP fabric, leaves connect through spines to preserve predictable equal-cost paths and scaling.
  4. Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes.

Explanation

Correct Answer

A:

path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. Here, a fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. A useful discriminating check is to check interface state, routing convergence and forwarding entries following the simulated spine-link loss.

Incorrect Answers

B:

That choice—“Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops”—addresses this other problem: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. Here the scenario is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The controlling principle is “Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly”.

C:

“In a conventional Clos IP fabric, leaves connect through spines to preserve predictable equal-cost paths and scaling” is associated with a distinct issue: A migration plan connects every rack leaf laterally and treats spine devices as only optional edge routers. By contrast, the actual problem is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The controlling principle is “Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly”.

D:

The option “Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes” is useful in a different setting: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. The case being tested is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The controlling principle is “Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly”.

Question 776

A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Which evidence most directly verifies the intended network outcome?

  1. Confirm the root metric stabilizes and correlated anomalies across dependent probes clear.
  2. Confirm latency measurements and anomaly state return within accepted bounds under representative traffic.
  3. Verify objective service and interface measurements improve and a valid probe no longer detects an anomaly.
  4. Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm the root metric stabilizes and correlated anomalies across dependent probes clear. The decisive investigation is to group probe anomalies by affected node and stage, then inspect linked telemetry and topology edges. The governing principle is that graph and probe context can correlate multiple anomalies to a shared physical or logical source.

Incorrect Answers

B:

“Confirm latency measurements and anomaly state return within accepted bounds under representative traffic” is relevant to a different condition: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. The stated question instead concerns: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Graph and probe context can correlate multiple anomalies to a shared physical or logical source. The direct acceptance evidence is “Confirm the root metric stabilizes and correlated anomalies across dependent probes clear”.

C:

That choice—“Verify objective service and interface measurements improve and a valid probe no longer detects an anomaly”—addresses this other problem: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. Here the scenario is: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Graph and probe context can correlate multiple anomalies to a shared physical or logical source. The direct acceptance evidence is “Confirm the root metric stabilizes and correlated anomalies across dependent probes clear”.

D:

“Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests” is associated with a distinct issue: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. By contrast, the actual problem is: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Graph and probe context can correlate multiple anomalies to a shared physical or logical source. The direct acceptance evidence is “Confirm the root metric stabilizes and correlated anomalies across dependent probes clear”.

Question 777

A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Which shortcut would be most likely to undermine this objective?

  1. Select an unsuitable reference design solely because it minimizes the initial number of switches.
  2. Bypass reference design validation and hand-wire devices into an arbitrary topology.
  3. Assume future leaf switches can be attached even after every suitable spine port is consumed.
  4. Assume every active fabric instantly adopts an edited global template without a staged change.

Explanation

Correct Answer

C:

This is the unsafe shortcut to avoid: assume future leaf switches can be attached even after every suitable spine port is consumed. It violates the principle that capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. An appropriate alternative is to reserve supported spine and rack capacity for the forecast growth while tracking oversubscription targets.

Incorrect Answers

A:

“Select an unsuitable reference design solely because it minimizes the initial number of switches” is associated with a distinct issue: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. By contrast, the actual problem is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The directly relevant unsafe shortcut is “Assume future leaf switches can be attached even after every suitable spine port is consumed”.

B:

The option “Bypass reference design validation and hand-wire devices into an arbitrary topology” is useful in a different setting: An architect wants consistent rack scale-out using a reference design rather than independently inventing each fabric topology. The case being tested is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The directly relevant unsafe shortcut is “Assume future leaf switches can be attached even after every suitable spine port is consumed”.

D:

That choice—“Assume every active fabric instantly adopts an edited global template without a staged change”—addresses this other problem: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. Here the scenario is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The directly relevant unsafe shortcut is “Assume future leaf switches can be attached even after every suitable spine port is consumed”.

Question 778

A rack template chooses a logical device with insufficient server ports for its planned generic systems. Which design or operational principle best explains this behavior?

  1. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details.
  2. Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity.
  3. Managed VNI and other logical resource pools reduce collision risk when correctly partitioned and allocated.
  4. Resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers.

Explanation

Correct Answer

A:

logical device definitions represent required interface roles and capacities, independent of hardware SKU details. Here, a rack template chooses a logical device with insufficient server ports for its planned generic systems. A useful discriminating check is to compare the selected logical device's interface count, speeds and connection roles with rack requirements.

Incorrect Answers

B:

“Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity” is associated with a distinct issue: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. By contrast, the actual problem is: A rack template chooses a logical device with insufficient server ports for its planned generic systems. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The controlling principle is “Logical device definitions represent required interface roles and capacities, independent of hardware SKU details”.

C:

The option “Managed VNI and other logical resource pools reduce collision risk when correctly partitioned and allocated” is useful in a different setting: A data center creates two tenants with conflicting VNI allocations despite using a shared Apstra resource service. The case being tested is: A rack template chooses a logical device with insufficient server ports for its planned generic systems. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The controlling principle is “Logical device definitions represent required interface roles and capacities, independent of hardware SKU details”.

D:

“Resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers” is relevant to a different condition: A new blueprint assigns every VTEP from a resource pool that is too small for the proposed rack count. The stated question instead concerns: A rack template chooses a logical device with insufficient server ports for its planned generic systems. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The controlling principle is “Logical device definitions represent required interface roles and capacities, independent of hardware SKU details”.

Question 779

A development VN is accidentally assigned to the wrong routing zone during a project migration. Which design or operational principle best explains this behavior?

  1. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context.
  2. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design.
  3. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary.
  4. Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone.

Explanation

Correct Answer

C:

a virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. Here, a development VN is accidentally assigned to the wrong routing zone during a project migration. A useful discriminating check is to inspect the VN's routing-zone binding, SVI and VRF route lookup on the affected leaf.

Incorrect Answers

A:

“A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context” is relevant to a different condition: A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. The stated question instead concerns: A development VN is accidentally assigned to the wrong routing zone during a project migration. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. The controlling principle is “A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary”.

B:

That choice—“Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design”—addresses this other problem: A provider wants separate customer routing domains that can reuse 10.10.0.0/16 without ambiguity. Here the scenario is: A development VN is accidentally assigned to the wrong routing zone during a project migration. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. The controlling principle is “A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary”.

D:

The option “Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone” is useful in a different setting: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. The case being tested is: A development VN is accidentally assigned to the wrong routing zone during a project migration. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. The controlling principle is “A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary”.

Question 780

A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Which design or operational principle best explains this behavior?

  1. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites.
  2. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service.
  3. Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries.
  4. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation.

Explanation

Correct Answer

D:

shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. Here, a data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. A useful discriminating check is to inspect the proposed external or shared-services routing path, import policy and required security controls.

Incorrect Answers

A:

The option “DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites” is useful in a different setting: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The case being tested is: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. The controlling principle is “Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation”.

B:

“Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service” is relevant to a different condition: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. The stated question instead concerns: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. The controlling principle is “Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation”.

C:

That choice—“Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries”—addresses this other problem: A route export template applied to a border device advertises all tenant prefixes beyond the data center. Here the scenario is: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. The controlling principle is “Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests