mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 60

Question 590

Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Which design or operational principle best explains this behavior?

  1. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity.
  2. Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity.
  3. Cable-map discrepancies should be reconciled before traffic flows through an unvalidated physical fabric.
  4. Unique accurate managed device identities are required for safe inventory and blueprint allocation.

Explanation

Correct Answer

D:

unique accurate managed device identities are required for safe inventory and blueprint allocation. Here, two appliances appear as one managed system after inventory import because their identifiers were copied from a template. A useful discriminating check is to compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices.

Incorrect Answers

A:

That choice—“Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity”—addresses this other problem: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Here the scenario is: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The controlling principle is “Unique accurate managed device identities are required for safe inventory and blueprint allocation”.

B:

“Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity” is associated with a distinct issue: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. By contrast, the actual problem is: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The controlling principle is “Unique accurate managed device identities are required for safe inventory and blueprint allocation”.

C:

The option “Cable-map discrepancies should be reconciled before traffic flows through an unvalidated physical fabric” is useful in a different setting: An Apstra blueprint expects a set of spine interfaces but physical inventory maps uplinks to different ports. The case being tested is: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The controlling principle is “Unique accurate managed device identities are required for safe inventory and blueprint allocation”.

Question 591

A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Which evidence most directly verifies the intended network outcome?

  1. Validate logical port counts and generated rack connections before building the blueprint.
  2. Verify all new logical devices receive unique assigned addresses and route reachability remains correct.
  3. Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites.
  4. Confirm each active virtual network has the intended unique or explicitly shared VNI mapping.

Explanation

Correct Answer

A:

This directly tests the desired result: validate logical port counts and generated rack connections before building the blueprint. The decisive investigation is to compare the selected logical device's interface count, speeds and connection roles with rack requirements. The governing principle is that logical device definitions represent required interface roles and capacities, independent of hardware SKU details.

Incorrect Answers

B:

That choice—“Verify all new logical devices receive unique assigned addresses and route reachability remains correct”—addresses this other problem: A new blueprint assigns every VTEP from a resource pool that is too small for the proposed rack count. Here the scenario is: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The direct acceptance evidence is “Validate logical port counts and generated rack connections before building the blueprint”.

C:

“Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites” is associated with a distinct issue: An automation wants to select switches tagged with a particular site and deployment tier. By contrast, the actual problem is: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The direct acceptance evidence is “Validate logical port counts and generated rack connections before building the blueprint”.

D:

The option “Confirm each active virtual network has the intended unique or explicitly shared VNI mapping” is useful in a different setting: A data center creates two tenants with conflicting VNI allocations despite using a shared Apstra resource service. The case being tested is: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The direct acceptance evidence is “Validate logical port counts and generated rack connections before building the blueprint”.

Question 592

An east-west application works without tunneling but drops large payloads after VXLAN overlay migration. Which evidence most directly verifies the intended network outcome?

  1. Confirm encapsulated packets reach the intended VTEP and are decapsulated to the authorized bridge domain.
  2. Observe valid endpoint advertisements with less dependence on unknown-destination flooding for known endpoints.
  3. Confirm representative maximum-size payloads traverse the VXLAN overlay without fragmentation-related drops.
  4. Measure expected BUM replication only among authorized VTEPs and improved traffic counters.

Explanation

Correct Answer

C:

This directly tests the desired result: confirm representative maximum-size payloads traverse the VXLAN overlay without fragmentation-related drops. The decisive investigation is to trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs. The governing principle is that VXLAN adds encapsulation overhead and requires adequate path MTU or effective payload sizing.

Incorrect Answers

A:

The option “Confirm encapsulated packets reach the intended VTEP and are decapsulated to the authorized bridge domain” is useful in a different setting: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. The case being tested is: An east-west application works without tunneling but drops large payloads after VXLAN overlay migration. VXLAN adds encapsulation overhead and requires adequate path MTU or effective payload sizing. The direct acceptance evidence is “Confirm representative maximum-size payloads traverse the VXLAN overlay without fragmentation-related drops”.

B:

“Observe valid endpoint advertisements with less dependence on unknown-destination flooding for known endpoints” is relevant to a different condition: An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. The stated question instead concerns: An east-west application works without tunneling but drops large payloads after VXLAN overlay migration. VXLAN adds encapsulation overhead and requires adequate path MTU or effective payload sizing. The direct acceptance evidence is “Confirm representative maximum-size payloads traverse the VXLAN overlay without fragmentation-related drops”.

D:

“Measure expected BUM replication only among authorized VTEPs and improved traffic counters” is associated with a distinct issue: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. By contrast, the actual problem is: An east-west application works without tunneling but drops large payloads after VXLAN overlay migration. VXLAN adds encapsulation overhead and requires adequate path MTU or effective payload sizing. The direct acceptance evidence is “Confirm representative maximum-size payloads traverse the VXLAN overlay without fragmentation-related drops”.

Question 593

A generic system connects to a leaf with one untagged network and a small approved list of tagged VNs. Which shortcut would be most likely to undermine this objective?

  1. Announce every local routing-zone prefix to all external peers instead of reviewing policy.
  2. Configure every virtual network as a tagged VLAN on the server trunk for convenience.
  3. Enable unrestricted route redistribution for every tenant to make a single external peering session work.
  4. Leak all tenant routes into one global routing table because only one shared DNS server is needed.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: configure every virtual network as a tagged VLAN on the server trunk for convenience. It violates the principle that connectivity templates define host-facing virtual-network endpoint membership and tagging behavior. An appropriate alternative is to bind only authorized tagged and untagged VN attachments to the selected generic-system port.

Incorrect Answers

A:

“Announce every local routing-zone prefix to all external peers instead of reviewing policy” is associated with a distinct issue: A route export template applied to a border device advertises all tenant prefixes beyond the data center. By contrast, the actual problem is: A generic system connects to a leaf with one untagged network and a small approved list of tagged VNs. Connectivity templates define host-facing virtual-network endpoint membership and tagging behavior. The directly relevant unsafe shortcut is “Configure every virtual network as a tagged VLAN on the server trunk for convenience”.

C:

“Enable unrestricted route redistribution for every tenant to make a single external peering session work” is relevant to a different condition: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. The stated question instead concerns: A generic system connects to a leaf with one untagged network and a small approved list of tagged VNs. Connectivity templates define host-facing virtual-network endpoint membership and tagging behavior. The directly relevant unsafe shortcut is “Configure every virtual network as a tagged VLAN on the server trunk for convenience”.

D:

That choice—“Leak all tenant routes into one global routing table because only one shared DNS server is needed”—addresses this other problem: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. Here the scenario is: A generic system connects to a leaf with one untagged network and a small approved list of tagged VNs. Connectivity templates define host-facing virtual-network endpoint membership and tagging behavior. The directly relevant unsafe shortcut is “Configure every virtual network as a tagged VLAN on the server trunk for convenience”.

Question 594

A route export template applied to a border device advertises all tenant prefixes beyond the data center. Which controlled change best addresses the described requirement?

  1. Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment.
  2. Create or correct a scoped connectivity template and routing policy for the authorized VRF.
  3. Bind only authorized tagged and untagged VN attachments to the selected generic-system port.
  4. Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes.

Explanation

Correct Answer

A:

This action addresses the stated defect: constrain the external peering policy to explicitly permitted prefixes and verify intended attachment. The underlying constraint is that routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries. Verify rather than assume success: confirm only approved routes are exchanged and unauthorized prefixes no longer leave the fabric.

Incorrect Answers

B:

“Create or correct a scoped connectivity template and routing policy for the authorized VRF” is associated with a distinct issue: A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. By contrast, the actual problem is: A route export template applied to a border device advertises all tenant prefixes beyond the data center. Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment. The most relevant correction is “Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment”.

C:

The option “Bind only authorized tagged and untagged VN attachments to the selected generic-system port” is useful in a different setting: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. The case being tested is: A route export template applied to a border device advertises all tenant prefixes beyond the data center. Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment. The most relevant correction is “Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment”.

D:

“Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes” is relevant to a different condition: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. The stated question instead concerns: A route export template applied to a border device advertises all tenant prefixes beyond the data center. Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment. The most relevant correction is “Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment”.

Question 595

An external peer receives a tenant's internal subnets that were supposed to stay private. Which shortcut would be most likely to undermine this objective?

  1. Announce every local routing-zone prefix to all external peers instead of reviewing policy.
  2. Enable unrestricted route redistribution for every tenant to make a single external peering session work.
  3. Configure every virtual network as a tagged VLAN on the server trunk for convenience.
  4. Assume a unique VLAN number alone guarantees Layer 3 tenant isolation.

Explanation

Correct Answer

A:

This is the unsafe shortcut to avoid: announce every local routing-zone prefix to all external peers instead of reviewing policy. It violates the principle that routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries. An appropriate alternative is to constrain the external peering policy to explicitly permitted prefixes and verify intended attachment.

Incorrect Answers

B:

That choice—“Enable unrestricted route redistribution for every tenant to make a single external peering session work”—addresses this other problem: A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. Here the scenario is: An external peer receives a tenant's internal subnets that were supposed to stay private. Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries. The directly relevant unsafe shortcut is “Announce every local routing-zone prefix to all external peers instead of reviewing policy”.

C:

“Configure every virtual network as a tagged VLAN on the server trunk for convenience” is associated with a distinct issue: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. By contrast, the actual problem is: An external peer receives a tenant's internal subnets that were supposed to stay private. Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries. The directly relevant unsafe shortcut is “Announce every local routing-zone prefix to all external peers instead of reviewing policy”.

D:

The option “Assume a unique VLAN number alone guarantees Layer 3 tenant isolation” is useful in a different setting: A development VN is accidentally assigned to the wrong routing zone during a project migration. The case being tested is: An external peer receives a tenant's internal subnets that were supposed to stay private. Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries. The directly relevant unsafe shortcut is “Announce every local routing-zone prefix to all external peers instead of reviewing policy”.

Question 596

An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. Which design or operational principle best explains this behavior?

  1. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership.
  2. EVPN uses a control-plane route exchange to distribute endpoint reachability while VXLAN carries encapsulated data.
  3. The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity.
  4. A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership.

Explanation

Correct Answer

A:

BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership. Here, an overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. A useful discriminating check is to inspect broadcast, unknown-unicast and multicast handling and participating VTEPs for the affected VNI.

Incorrect Answers

B:

“EVPN uses a control-plane route exchange to distribute endpoint reachability while VXLAN carries encapsulated data” is relevant to a different condition: A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. The stated question instead concerns: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership. The controlling principle is “BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership”.

C:

That choice—“The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity”—addresses this other problem: A rack migration assigns the correct switch access VLAN but places the VTEP into another tenant's virtual network identifier. Here the scenario is: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership. The controlling principle is “BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership”.

D:

“A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership” is associated with a distinct issue: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. By contrast, the actual problem is: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership. The controlling principle is “BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership”.

Question 597

Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Which shortcut would be most likely to undermine this objective?

  1. Assume restoring an older controller database automatically rolls back all switches to the same moment.
  2. Force an unsupported image into production and trust that agent discovery alone guarantees compatibility.
  3. Assume an old green device status proves the agent is still collecting current data.
  4. Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient. It violates the principle that centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. An appropriate alternative is to coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.

Incorrect Answers

A:

“Assume restoring an older controller database automatically rolls back all switches to the same moment” is associated with a distinct issue: An operations team recovers a backup of the controller taken before the most recent fabric changes. By contrast, the actual problem is: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. The directly relevant unsafe shortcut is “Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient”.

B:

The option “Force an unsupported image into production and trust that agent discovery alone guarantees compatibility” is useful in a different setting: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. The case being tested is: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. The directly relevant unsafe shortcut is “Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient”.

C:

“Assume an old green device status proves the agent is still collecting current data” is relevant to a different condition: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. The stated question instead concerns: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. The directly relevant unsafe shortcut is “Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient”.

Question 598

A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. Which initial check would most directly distinguish the likely cause?

  1. Inspect the Staged, Uncommitted and Active states and per-device deployment status.
  2. Compare pristine, incremental and rendered configuration artifacts for the targeted device and intended change.
  3. Inspect pending differences and deploy status from the blueprint UI before accepting the change.
  4. Check each device's state, failed action details and intended-versus-running configuration revision.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect pending differences and deploy status from the blueprint UI before accepting the change. The underlying concept is that controlled build and deploy phases separate design validation, reviewed staged changes and active device updates. After confirming the finding, a controlled remediation is to review the changes, commit the authorized revision and monitor the resulting device deployments.

Incorrect Answers

A:

That choice—“Inspect the Staged, Uncommitted and Active states and per-device deployment status”—addresses this other problem: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. Here the scenario is: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The relevant inspection is: Inspect pending differences and deploy status from the blueprint UI before accepting the change. The most discriminating first check is “Inspect pending differences and deploy status from the blueprint UI before accepting the change”.

B:

“Compare pristine, incremental and rendered configuration artifacts for the targeted device and intended change” is associated with a distinct issue: An operations team must compare pristine, incremental and rendered configuration views before a planned device update. By contrast, the actual problem is: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The relevant inspection is: Inspect pending differences and deploy status from the blueprint UI before accepting the change. The most discriminating first check is “Inspect pending differences and deploy status from the blueprint UI before accepting the change”.

D:

“Check each device's state, failed action details and intended-versus-running configuration revision” is relevant to a different condition: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The stated question instead concerns: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The relevant inspection is: Inspect pending differences and deploy status from the blueprint UI before accepting the change. The most discriminating first check is “Inspect pending differences and deploy status from the blueprint UI before accepting the change”.

Question 599

An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Which controlled change best addresses the described requirement?

  1. Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability.
  2. Correct underlay failure detection and routing convergence within the approved topology and timer policy.
  3. Repair the routed underlay addressing or protocol configuration and then validate overlay sessions.
  4. Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs.

Explanation

Correct Answer

A:

This action addresses the stated defect: advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability. The underlying constraint is that overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes. Verify rather than assume success: confirm remote VTEP loopbacks resolve to healthy fabric routes and VXLAN tunnel traffic succeeds.

Incorrect Answers

B:

That choice—“Correct underlay failure detection and routing convergence within the approved topology and timer policy”—addresses this other problem: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Here the scenario is: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability. The most relevant correction is “Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability”.

C:

“Repair the routed underlay addressing or protocol configuration and then validate overlay sessions” is associated with a distinct issue: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. By contrast, the actual problem is: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability. The most relevant correction is “Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability”.

D:

The option “Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs” is useful in a different setting: A customer asks why adding a second spine path does not necessarily double the rate of one elephant-flow TCP session. The case being tested is: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability. The most relevant correction is “Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability”.

Question 600

A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Which initial check would most directly distinguish the likely cause?

  1. Inspect rack type properties and compare the proposed rack's connectivity with its validated peers.
  2. Review consumed spine port counts, interface maps and oversubscription projections.
  3. Review single-versus-dual leaf rack settings and server connectivity requirements.
  4. Inspect the rack type's expected spine attachment graph and actual cable endpoints.

Explanation

Correct Answer

B:

This checks the relevant evidence first: review consumed spine port counts, interface maps and oversubscription projections. The underlying concept is that total spine capacity includes available physical ports and supported link-speed and topology constraints. After confirming the finding, a controlled remediation is to expand spine capacity or rescope rack additions under a supported topology design.

Incorrect Answers

A:

The option “Inspect rack type properties and compare the proposed rack's connectivity with its validated peers” is useful in a different setting: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. The case being tested is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. The relevant inspection is: Review consumed spine port counts, interface maps and oversubscription projections. The most discriminating first check is “Review consumed spine port counts, interface maps and oversubscription projections”.

C:

That choice—“Review single-versus-dual leaf rack settings and server connectivity requirements”—addresses this other problem: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. Here the scenario is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. The relevant inspection is: Review consumed spine port counts, interface maps and oversubscription projections. The most discriminating first check is “Review consumed spine port counts, interface maps and oversubscription projections”.

D:

“Inspect the rack type's expected spine attachment graph and actual cable endpoints” is associated with a distinct issue: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. By contrast, the actual problem is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. The relevant inspection is: Review consumed spine port counts, interface maps and oversubscription projections. The most discriminating first check is “Review consumed spine port counts, interface maps and oversubscription projections”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests