mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 58

Question 570

A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Which evidence most directly verifies the intended network outcome?

  1. Confirm the service anomaly clears and the affected workload network passes functional tests.
  2. Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms.
  3. Confirm live telemetry returns inside accepted bounds and the probe alert clears with supporting samples.
  4. Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm the service anomaly clears and the affected workload network passes functional tests. The decisive investigation is to inspect the specific service anomaly, affected objects and intended virtual-network configuration and state. The governing principle is that an Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure.

Incorrect Answers

B:

“Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms” is associated with a distinct issue: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. By contrast, the actual problem is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The direct acceptance evidence is “Confirm the service anomaly clears and the affected workload network passes functional tests”.

C:

The option “Confirm live telemetry returns inside accepted bounds and the probe alert clears with supporting samples” is useful in a different setting: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. The case being tested is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The direct acceptance evidence is “Confirm the service anomaly clears and the affected workload network passes functional tests”.

D:

“Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands” is relevant to a different condition: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. The stated question instead concerns: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The direct acceptance evidence is “Confirm the service anomaly clears and the affected workload network passes functional tests”.

Question 571

A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Which evidence most directly verifies the intended network outcome?

  1. Confirm the server receives fresh device state and reconciles inventory and blueprint expectations.
  2. Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint.
  3. Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.
  4. Verify each committed change maps to an approved request and attributable operator action.

Explanation

Correct Answer

B:

This directly tests the desired result: prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint. The decisive investigation is to check supported platform and NOS versions alongside device profile and agent compatibility before assigning the switch. The governing principle is that supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation.

Incorrect Answers

A:

“Confirm the server receives fresh device state and reconciles inventory and blueprint expectations” is relevant to a different condition: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. The stated question instead concerns: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation. The direct acceptance evidence is “Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint”.

C:

“Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied” is associated with a distinct issue: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. By contrast, the actual problem is: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation. The direct acceptance evidence is “Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint”.

D:

The option “Verify each committed change maps to an approved request and attributable operator action” is useful in a different setting: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. The case being tested is: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation. The direct acceptance evidence is “Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint”.

Question 572

An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Which initial check would most directly distinguish the likely cause?

  1. Review single-versus-dual leaf rack settings and server connectivity requirements.
  2. Inspect the rack type's expected spine attachment graph and actual cable endpoints.
  3. Review consumed spine port counts, interface maps and oversubscription projections.
  4. Inspect rack type properties and compare the proposed rack's connectivity with its validated peers.

Explanation

Correct Answer

D:

This checks the relevant evidence first: inspect rack type properties and compare the proposed rack's connectivity with its validated peers. The underlying concept is that rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. After confirming the finding, a controlled remediation is to create or select the approved reusable rack type and instantiate the rack consistently.

Incorrect Answers

A:

The option “Review single-versus-dual leaf rack settings and server connectivity requirements” is useful in a different setting: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The case being tested is: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. The relevant inspection is: Inspect rack type properties and compare the proposed rack's connectivity with its validated peers. The most discriminating first check is “Inspect rack type properties and compare the proposed rack's connectivity with its validated peers”.

B:

“Inspect the rack type's expected spine attachment graph and actual cable endpoints” is relevant to a different condition: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The stated question instead concerns: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. The relevant inspection is: Inspect rack type properties and compare the proposed rack's connectivity with its validated peers. The most discriminating first check is “Inspect rack type properties and compare the proposed rack's connectivity with its validated peers”.

C:

That choice—“Review consumed spine port counts, interface maps and oversubscription projections”—addresses this other problem: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. Here the scenario is: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. The relevant inspection is: Inspect rack type properties and compare the proposed rack's connectivity with its validated peers. The most discriminating first check is “Inspect rack type properties and compare the proposed rack's connectivity with its validated peers”.

Question 573

A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. Which initial check would most directly distinguish the likely cause?

  1. Inspect the specific service anomaly, affected objects and intended virtual-network configuration and state.
  2. Inspect anomaly type and affected graph nodes before selecting the next technical investigation.
  3. Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state.
  4. Inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state. The underlying concept is that probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. After confirming the finding, a controlled remediation is to investigate the measured condition and adjust the approved monitored system or justified probe threshold.

Incorrect Answers

A:

“Inspect the specific service anomaly, affected objects and intended virtual-network configuration and state” is associated with a distinct issue: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. By contrast, the actual problem is: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. The relevant inspection is: Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state. The most discriminating first check is “Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state”.

B:

The option “Inspect anomaly type and affected graph nodes before selecting the next technical investigation” is useful in a different setting: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. The case being tested is: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. The relevant inspection is: Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state. The most discriminating first check is “Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state”.

D:

That choice—“Inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices”—addresses this other problem: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. Here the scenario is: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. The relevant inspection is: Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state. The most discriminating first check is “Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state”.

Question 574

A migration plan connects every rack leaf laterally and treats spine devices as only optional edge routers. Which controlled change best addresses the described requirement?

  1. Use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links.
  2. Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability.
  3. Correct underlay failure detection and routing convergence within the approved topology and timer policy.
  4. Repair the routed underlay addressing or protocol configuration and then validate overlay sessions.

Explanation

Correct Answer

A:

This action addresses the stated defect: use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links. The underlying constraint is that in a conventional Clos IP fabric, leaves connect through spines to preserve predictable equal-cost paths and scaling. Verify rather than assume success: confirm each leaf reaches other leaves via expected spine paths and no unintended data-center transit loops exist.

Incorrect Answers

B:

“Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability” is associated with a distinct issue: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. By contrast, the actual problem is: A migration plan connects every rack leaf laterally and treats spine devices as only optional edge routers. The governing requirement is to use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links. The most relevant correction is “Use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links”.

C:

The option “Correct underlay failure detection and routing convergence within the approved topology and timer policy” is useful in a different setting: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The case being tested is: A migration plan connects every rack leaf laterally and treats spine devices as only optional edge routers. The governing requirement is to use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links. The most relevant correction is “Use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links”.

D:

“Repair the routed underlay addressing or protocol configuration and then validate overlay sessions” is relevant to a different condition: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. The stated question instead concerns: A migration plan connects every rack leaf laterally and treats spine devices as only optional edge routers. The governing requirement is to use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links. The most relevant correction is “Use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links”.

Question 575

An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. Which design or operational principle best explains this behavior?

  1. The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity.
  2. A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership.
  3. EVPN uses a control-plane route exchange to distribute endpoint reachability while VXLAN carries encapsulated data.
  4. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership.

Explanation

Correct Answer

B:

a VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership. Here, an endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. A useful discriminating check is to inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability.

Incorrect Answers

A:

“The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity” is relevant to a different condition: A rack migration assigns the correct switch access VLAN but places the VTEP into another tenant's virtual network identifier. The stated question instead concerns: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership. The controlling principle is “A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership”.

C:

“EVPN uses a control-plane route exchange to distribute endpoint reachability while VXLAN carries encapsulated data” is associated with a distinct issue: A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. By contrast, the actual problem is: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership. The controlling principle is “A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership”.

D:

The option “BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership” is useful in a different setting: A fabric sees unexpectedly broad BUM traffic after a new VXLAN virtual network is provisioned. The case being tested is: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership. The controlling principle is “A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership”.

Question 576

A staging team has different cable-map snapshots from design and observed discovery data. Which controlled change best addresses the described requirement?

  1. Correct physical cabling or update the approved design only after confirming the intended topology.
  2. Resolve the specific failed device deployment and reapply the approved configuration to that device.
  3. Update the correct physical patching or approved blueprint mapping in one controlled change.
  4. Review the changes, commit the authorized revision and monitor the resulting device deployments.

Explanation

Correct Answer

C:

This action addresses the stated defect: update the correct physical patching or approved blueprint mapping in one controlled change. The underlying constraint is that cable-map discrepancies should be reconciled before traffic flows through an unvalidated physical fabric. Verify rather than assume success: observe matching physical and logical connectivity and no unresolved cabling anomalies.

Incorrect Answers

A:

The option “Correct physical cabling or update the approved design only after confirming the intended topology” is useful in a different setting: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. The case being tested is: A staging team has different cable-map snapshots from design and observed discovery data. Update the correct physical patching or approved blueprint mapping in one controlled change. The most relevant correction is “Update the correct physical patching or approved blueprint mapping in one controlled change”.

B:

“Resolve the specific failed device deployment and reapply the approved configuration to that device” is relevant to a different condition: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The stated question instead concerns: A staging team has different cable-map snapshots from design and observed discovery data. Update the correct physical patching or approved blueprint mapping in one controlled change. The most relevant correction is “Update the correct physical patching or approved blueprint mapping in one controlled change”.

D:

“Review the changes, commit the authorized revision and monitor the resulting device deployments” is associated with a distinct issue: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. By contrast, the actual problem is: A staging team has different cable-map snapshots from design and observed discovery data. Update the correct physical patching or approved blueprint mapping in one controlled change. The most relevant correction is “Update the correct physical patching or approved blueprint mapping in one controlled change”.

Question 577

A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. Which evidence most directly verifies the intended network outcome?

  1. Confirm active blueprint state matches the intended retained revision and critical services recover.
  2. Confirm no required pending work was silently lost and the correct historical revision became active.
  3. Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged.
  4. Prove the revised blueprint builds with valid allocations and switches converge on intended active state.

Explanation

Correct Answer

D:

This directly tests the desired result: prove the revised blueprint builds with valid allocations and switches converge on intended active state. The decisive investigation is to inspect historical identifiers, resource assignments, device availability and supported rollback constraints. The governing principle is that Time Voyager restoration can fail or require reconciliation when historical resource allocations or device identities conflict with current inventory.

Incorrect Answers

A:

“Confirm active blueprint state matches the intended retained revision and critical services recover” is associated with a distinct issue: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. By contrast, the actual problem is: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. Time Voyager restoration can fail or require reconciliation when historical resource allocations or device identities conflict with current inventory. The direct acceptance evidence is “Prove the revised blueprint builds with valid allocations and switches converge on intended active state”.

B:

The option “Confirm no required pending work was silently lost and the correct historical revision became active” is useful in a different setting: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. The case being tested is: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. Time Voyager restoration can fail or require reconciliation when historical resource allocations or device identities conflict with current inventory. The direct acceptance evidence is “Prove the revised blueprint builds with valid allocations and switches converge on intended active state”.

C:

“Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged” is relevant to a different condition: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. The stated question instead concerns: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. Time Voyager restoration can fail or require reconciliation when historical resource allocations or device identities conflict with current inventory. The direct acceptance evidence is “Prove the revised blueprint builds with valid allocations and switches converge on intended active state”.

Question 578

An operator wants to identify managed nodes by rack and role in the blueprint graph. Which evidence most directly verifies the intended network outcome?

  1. Verify the inventory's object IDs, tenant ownership and linked endpoints before making changes.
  2. Confirm the selection contains exactly the intended leafs and excludes similarly named devices elsewhere.
  3. Confirm the resulting active revision contains only approved changes and has a traceable description.
  4. Confirm every intended consumer receives the updated value and unrelated devices retain their settings.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm the selection contains exactly the intended leafs and excludes similarly named devices elsewhere. The decisive investigation is to inspect object types, graph relationship properties and returned identities for the intended rack. The governing principle is that blueprint graph and object queries can select devices using modeled relationships rather than fragile substring matches.

Incorrect Answers

A:

That choice—“Verify the inventory's object IDs, tenant ownership and linked endpoints before making changes”—addresses this other problem: A team wants to locate every virtual network owned by a particular application during a migration. Here the scenario is: An operator wants to identify managed nodes by rack and role in the blueprint graph. Blueprint graph and object queries can select devices using modeled relationships rather than fragile substring matches. The direct acceptance evidence is “Confirm the selection contains exactly the intended leafs and excludes similarly named devices elsewhere”.

C:

The option “Confirm the resulting active revision contains only approved changes and has a traceable description” is useful in a different setting: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. The case being tested is: An operator wants to identify managed nodes by rack and role in the blueprint graph. Blueprint graph and object queries can select devices using modeled relationships rather than fragile substring matches. The direct acceptance evidence is “Confirm the selection contains exactly the intended leafs and excludes similarly named devices elsewhere”.

D:

“Confirm every intended consumer receives the updated value and unrelated devices retain their settings” is relevant to a different condition: A team wants to reuse the same approved DNS and NTP settings across multiple racks without editing every switch individually. The stated question instead concerns: An operator wants to identify managed nodes by rack and role in the blueprint graph. Blueprint graph and object queries can select devices using modeled relationships rather than fragile substring matches. The direct acceptance evidence is “Confirm the selection contains exactly the intended leafs and excludes similarly named devices elsewhere”.

Question 579

An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. Which shortcut would be most likely to undermine this objective?

  1. Try to solve missing host MAC advertisements solely by creating unrelated Type 5 subnet prefixes.
  2. Configure the same unrestricted import policy for every tenant just because route distinguishers differ.
  3. Disable tenant-specific route import controls globally as a quick way to make MAC routes appear.
  4. Assume Type 2 MAC advertisements alone always provide every external routed subnet.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: assume Type 2 MAC advertisements alone always provide every external routed subnet. It violates the principle that EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements. An appropriate alternative is to correct prefix export/import and next-hop resolution for the routed EVPN IP prefix.

Incorrect Answers

A:

“Try to solve missing host MAC advertisements solely by creating unrelated Type 5 subnet prefixes” is relevant to a different condition: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. The stated question instead concerns: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements. The directly relevant unsafe shortcut is “Assume Type 2 MAC advertisements alone always provide every external routed subnet”.

B:

That choice—“Configure the same unrestricted import policy for every tenant just because route distinguishers differ”—addresses this other problem: A provider deploys two isolated VRFs containing identical IP prefixes in distinct tenant spaces. Here the scenario is: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements. The directly relevant unsafe shortcut is “Assume Type 2 MAC advertisements alone always provide every external routed subnet”.

C:

“Disable tenant-specific route import controls globally as a quick way to make MAC routes appear” is associated with a distinct issue: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. By contrast, the actual problem is: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements. The directly relevant unsafe shortcut is “Assume Type 2 MAC advertisements alone always provide every external routed subnet”.

Question 580

An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. Which initial check would most directly distinguish the likely cause?

  1. Inspect pool size, consumed allocations and required identifiers for all logical devices.
  2. Inspect object tags and query results before selecting the intended device set.
  3. Compare the selected logical device's interface count, speeds and connection roles with rack requirements.
  4. Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings.

Explanation

Correct Answer

D:

This checks the relevant evidence first: check the VNI resource pool, existing reservations and intended tenant-to-VN mappings. The underlying concept is that managed VNI and other logical resource pools reduce collision risk when correctly partitioned and allocated. After confirming the finding, a controlled remediation is to use validated unique VNI allocations or partition resource pools according to approved boundaries.

Incorrect Answers

A:

The option “Inspect pool size, consumed allocations and required identifiers for all logical devices” is useful in a different setting: A new blueprint assigns every VTEP from a resource pool that is too small for the proposed rack count. The case being tested is: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. The relevant inspection is: Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings. The most discriminating first check is “Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings”.

B:

“Inspect object tags and query results before selecting the intended device set” is relevant to a different condition: An automation wants to select switches tagged with a particular site and deployment tier. The stated question instead concerns: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. The relevant inspection is: Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings. The most discriminating first check is “Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings”.

C:

That choice—“Compare the selected logical device's interface count, speeds and connection roles with rack requirements”—addresses this other problem: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Here the scenario is: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. The relevant inspection is: Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings. The most discriminating first check is “Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests