mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 61

Question 600

A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Which initial check would most directly distinguish the likely cause?

  1. Inspect rack type properties and compare the proposed rack's connectivity with its validated peers.
  2. Review consumed spine port counts, interface maps and oversubscription projections.
  3. Review single-versus-dual leaf rack settings and server connectivity requirements.
  4. Inspect the rack type's expected spine attachment graph and actual cable endpoints.

Explanation

Correct Answer

B:

This checks the relevant evidence first: review consumed spine port counts, interface maps and oversubscription projections. The underlying concept is that total spine capacity includes available physical ports and supported link-speed and topology constraints. After confirming the finding, a controlled remediation is to expand spine capacity or rescope rack additions under a supported topology design.

Incorrect Answers

A:

The option “Inspect rack type properties and compare the proposed rack's connectivity with its validated peers” is useful in a different setting: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. The case being tested is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. The relevant inspection is: Review consumed spine port counts, interface maps and oversubscription projections. The most discriminating first check is “Review consumed spine port counts, interface maps and oversubscription projections”.

C:

That choice—“Review single-versus-dual leaf rack settings and server connectivity requirements”—addresses this other problem: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. Here the scenario is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. The relevant inspection is: Review consumed spine port counts, interface maps and oversubscription projections. The most discriminating first check is “Review consumed spine port counts, interface maps and oversubscription projections”.

D:

“Inspect the rack type's expected spine attachment graph and actual cable endpoints” is associated with a distinct issue: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. By contrast, the actual problem is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. The relevant inspection is: Review consumed spine port counts, interface maps and oversubscription projections. The most discriminating first check is “Review consumed spine port counts, interface maps and oversubscription projections”.

Question 601

Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. Which controlled change best addresses the described requirement?

  1. Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review.
  2. Complete review and commit of the authorized staged change, then monitor device convergence.
  3. Revert the specific uncommitted edit rather than rolling back an unrelated committed revision.
  4. Separate, revert or review unrelated staged edits before an authorized commit according to process.

Explanation

Correct Answer

D:

This action addresses the stated defect: separate, revert or review unrelated staged edits before an authorized commit according to process. The underlying constraint is that the set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications. Verify rather than assume success: confirm the resulting active revision contains only approved changes and has a traceable description.

Incorrect Answers

A:

“Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review” is associated with a distinct issue: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. By contrast, the actual problem is: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. Separate, revert or review unrelated staged edits before an authorized commit according to process. The most relevant correction is “Separate, revert or review unrelated staged edits before an authorized commit according to process”.

B:

The option “Complete review and commit of the authorized staged change, then monitor device convergence” is useful in a different setting: A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. The case being tested is: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. Separate, revert or review unrelated staged edits before an authorized commit according to process. The most relevant correction is “Separate, revert or review unrelated staged edits before an authorized commit according to process”.

C:

“Revert the specific uncommitted edit rather than rolling back an unrelated committed revision” is relevant to a different condition: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. The stated question instead concerns: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. Separate, revert or review unrelated staged edits before an authorized commit according to process. The most relevant correction is “Separate, revert or review unrelated staged edits before an authorized commit according to process”.

Question 602

A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. Which controlled change best addresses the described requirement?

  1. Review and commit the approved staged change using the documented deployment process.
  2. Select the approved deployment or diagnostic view before reviewing and applying configuration diffs.
  3. Update the correct physical patching or approved blueprint mapping in one controlled change.
  4. Review the changes, commit the authorized revision and monitor the resulting device deployments.

Explanation

Correct Answer

D:

This action addresses the stated defect: review the changes, commit the authorized revision and monitor the resulting device deployments. The underlying constraint is that controlled build and deploy phases separate design validation, reviewed staged changes and active device updates. Verify rather than assume success: confirm active intent, device configuration and required network tests agree on the intended result.

Incorrect Answers

A:

That choice—“Review and commit the approved staged change using the documented deployment process”—addresses this other problem: A network engineer views valid proposed changes under Staged and mistakenly assumes all devices were updated. Here the scenario is: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The relevant inspection is: Review the changes, commit the authorized revision and monitor the resulting device deployments. The most relevant correction is “Review the changes, commit the authorized revision and monitor the resulting device deployments”.

B:

“Select the approved deployment or diagnostic view before reviewing and applying configuration diffs” is associated with a distinct issue: An operations team must compare pristine, incremental and rendered configuration views before a planned device update. By contrast, the actual problem is: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The relevant inspection is: Review the changes, commit the authorized revision and monitor the resulting device deployments. The most relevant correction is “Review the changes, commit the authorized revision and monitor the resulting device deployments”.

C:

The option “Update the correct physical patching or approved blueprint mapping in one controlled change” is useful in a different setting: A staging team has different cable-map snapshots from design and observed discovery data. The case being tested is: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The relevant inspection is: Review the changes, commit the authorized revision and monitor the resulting device deployments. The most relevant correction is “Review the changes, commit the authorized revision and monitor the resulting device deployments”.

Question 603

An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Which design or operational principle best explains this behavior?

  1. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches.
  2. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion.
  3. Graph and probe context can correlate multiple anomalies to a shared physical or logical source.
  4. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope.

Explanation

Correct Answer

A:

analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. Here, an IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. A useful discriminating check is to inspect affected probe stages, timestamps and source telemetry along the application path.

Incorrect Answers

B:

That choice—“A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion”—addresses this other problem: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. Here the scenario is: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. The controlling principle is “Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches”.

C:

“Graph and probe context can correlate multiple anomalies to a shared physical or logical source” is associated with a distinct issue: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. By contrast, the actual problem is: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. The controlling principle is “Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches”.

D:

The option “An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope” is useful in a different setting: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. The case being tested is: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. The controlling principle is “Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches”.

Question 604

An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. Which initial check would most directly distinguish the likely cause?

  1. Check each device's state, failed action details and intended-versus-running configuration revision.
  2. Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map.
  3. Review the intended cable-map endpoints, device identities and actual discovered LLDP neighbors.
  4. Inspect the Staged, Uncommitted and Active states and per-device deployment status.

Explanation

Correct Answer

A:

This checks the relevant evidence first: check each device's state, failed action details and intended-versus-running configuration revision. The underlying concept is that per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly. After confirming the finding, a controlled remediation is to resolve the specific failed device deployment and reapply the approved configuration to that device.

Incorrect Answers

B:

“Compare LLDP-discovered endpoints and physical interface identifiers against the generated cable map” is relevant to a different condition: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. The stated question instead concerns: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The relevant inspection is: Check each device's state, failed action details and intended-versus-running configuration revision. The most discriminating first check is “Check each device's state, failed action details and intended-versus-running configuration revision”.

C:

That choice—“Review the intended cable-map endpoints, device identities and actual discovered LLDP neighbors”—addresses this other problem: A staging team has different cable-map snapshots from design and observed discovery data. Here the scenario is: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The relevant inspection is: Check each device's state, failed action details and intended-versus-running configuration revision. The most discriminating first check is “Check each device's state, failed action details and intended-versus-running configuration revision”.

D:

“Inspect the Staged, Uncommitted and Active states and per-device deployment status” is associated with a distinct issue: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. By contrast, the actual problem is: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The relevant inspection is: Check each device's state, failed action details and intended-versus-running configuration revision. The most discriminating first check is “Check each device's state, failed action details and intended-versus-running configuration revision”.

Question 605

A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. Which initial check would most directly distinguish the likely cause?

  1. Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods.
  2. Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability.
  3. Inspect broadcast, unknown-unicast and multicast handling and participating VTEPs for the affected VNI.
  4. Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent.

Explanation

Correct Answer

A:

This checks the relevant evidence first: inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods. The underlying concept is that EVPN uses a control-plane route exchange to distribute endpoint reachability while VXLAN carries encapsulated data. After confirming the finding, a controlled remediation is to use the supported EVPN control plane and verify route import for the intended virtual network.

Incorrect Answers

B:

The option “Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability” is useful in a different setting: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. The case being tested is: A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. The relevant inspection is: Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods. The most discriminating first check is “Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods”.

C:

“Inspect broadcast, unknown-unicast and multicast handling and participating VTEPs for the affected VNI” is relevant to a different condition: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. The stated question instead concerns: A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. The relevant inspection is: Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods. The most discriminating first check is “Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods”.

D:

That choice—“Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent”—addresses this other problem: A rack migration assigns the correct switch access VLAN but places the VTEP into another tenant's virtual network identifier. Here the scenario is: A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. The relevant inspection is: Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods. The most discriminating first check is “Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods”.

Question 606

A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Which design or operational principle best explains this behavior?

  1. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites.
  2. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation.
  3. Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone.
  4. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service.

Explanation

Correct Answer

D:

hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. Here, a virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. A useful discriminating check is to compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment.

Incorrect Answers

A:

That choice—“DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites”—addresses this other problem: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. Here the scenario is: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The controlling principle is “Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service”.

B:

“Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation” is associated with a distinct issue: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. By contrast, the actual problem is: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The controlling principle is “Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service”.

C:

The option “Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone” is useful in a different setting: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. The case being tested is: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The controlling principle is “Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service”.

Question 607

Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. Which design or operational principle best explains this behavior?

  1. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability.
  2. EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements.
  3. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution.
  4. EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning.

Explanation

Correct Answer

C:

EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. Here, two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. A useful discriminating check is to compare route distinguishers, route targets and actual VRF import policy for each tenant.

Incorrect Answers

A:

“Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability” is relevant to a different condition: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. The stated question instead concerns: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The controlling principle is “EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution”.

B:

That choice—“EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements”—addresses this other problem: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. Here the scenario is: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The controlling principle is “EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution”.

D:

The option “EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning” is useful in a different setting: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. The case being tested is: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The controlling principle is “EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution”.

Question 608

Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. Which initial check would most directly distinguish the likely cause?

  1. Inspect virtual-network membership and routing-zone assignments for the application segments.
  2. Inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes.
  3. Inspect the VN's routing-zone binding, SVI and VRF route lookup on the affected leaf.
  4. Inspect the proposed external or shared-services routing path, import policy and required security controls.

Explanation

Correct Answer

B:

This checks the relevant evidence first: inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes. The underlying concept is that Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design. After confirming the finding, a controlled remediation is to assign each customer to the intended isolated routing zone and VRF with appropriate virtual-network mappings.

Incorrect Answers

A:

The option “Inspect virtual-network membership and routing-zone assignments for the application segments” is useful in a different setting: A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. The case being tested is: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. The relevant inspection is: Inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes. The most discriminating first check is “Inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes”.

C:

That choice—“Inspect the VN's routing-zone binding, SVI and VRF route lookup on the affected leaf”—addresses this other problem: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. Here the scenario is: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. The relevant inspection is: Inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes. The most discriminating first check is “Inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes”.

D:

“Inspect the proposed external or shared-services routing path, import policy and required security controls” is associated with a distinct issue: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. By contrast, the actual problem is: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. The relevant inspection is: Inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes. The most discriminating first check is “Inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes”.

Question 609

A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Which shortcut would be most likely to undermine this objective?

  1. Reboot every leaf because all anomaly types allegedly mean the same physical fault.
  2. Dismiss all service anomalies merely because the underlying physical links are up.
  3. Delete the probe because no service-configuration mismatch appears on the dashboard.
  4. Commit blindly and assume every outstanding uncommitted change belongs to the current ticket.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: dismiss all service anomalies merely because the underlying physical links are up. It violates the principle that an Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. An appropriate alternative is to correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation.

Incorrect Answers

A:

“Reboot every leaf because all anomaly types allegedly mean the same physical fault” is associated with a distinct issue: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. By contrast, the actual problem is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The directly relevant unsafe shortcut is “Dismiss all service anomalies merely because the underlying physical links are up”.

C:

“Delete the probe because no service-configuration mismatch appears on the dashboard” is relevant to a different condition: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. The stated question instead concerns: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The directly relevant unsafe shortcut is “Dismiss all service anomalies merely because the underlying physical links are up”.

D:

That choice—“Commit blindly and assume every outstanding uncommitted change belongs to the current ticket”—addresses this other problem: A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. Here the scenario is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The directly relevant unsafe shortcut is “Dismiss all service anomalies merely because the underlying physical links are up”.

Question 610

An operations team must compare pristine, incremental and rendered configuration views before a planned device update. Which shortcut would be most likely to undermine this objective?

  1. Treat the existence of a rendered config file as proof of deployment to every switch.
  2. Assume every configuration view is identical and blindly paste one into the device CLI.
  3. Skip diff review and declare the change complete as soon as the design editor saves it.
  4. Assume an SSH prompt proves the device is fully under Apstra management.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: assume every configuration view is identical and blindly paste one into the device CLI. It violates the principle that configuration views represent different aspects of the managed device configuration and should be interpreted in their proper context. An appropriate alternative is to select the approved deployment or diagnostic view before reviewing and applying configuration diffs.

Incorrect Answers

A:

That choice—“Treat the existence of a rendered config file as proof of deployment to every switch”—addresses this other problem: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. Here the scenario is: An operations team must compare pristine, incremental and rendered configuration views before a planned device update. Configuration views represent different aspects of the managed device configuration and should be interpreted in their proper context. The directly relevant unsafe shortcut is “Assume every configuration view is identical and blindly paste one into the device CLI”.

C:

The option “Skip diff review and declare the change complete as soon as the design editor saves it” is useful in a different setting: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The case being tested is: An operations team must compare pristine, incremental and rendered configuration views before a planned device update. Configuration views represent different aspects of the managed device configuration and should be interpreted in their proper context. The directly relevant unsafe shortcut is “Assume every configuration view is identical and blindly paste one into the device CLI”.

D:

“Assume an SSH prompt proves the device is fully under Apstra management” is relevant to a different condition: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. The stated question instead concerns: An operations team must compare pristine, incremental and rendered configuration views before a planned device update. Configuration views represent different aspects of the managed device configuration and should be interpreted in their proper context. The directly relevant unsafe shortcut is “Assume every configuration view is identical and blindly paste one into the device CLI”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests