mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 57

Question 560

A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Which initial check would most directly distinguish the likely cause?

  1. Inspect installed ECMP next hops and compare per-link counters across multiple distinct flows.
  2. Inspect routing tables and underlay advertisements for each intended VTEP address.
  3. Check interface state, routing convergence and forwarding entries following the simulated spine-link loss.
  4. Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints.

Explanation

Correct Answer

C:

This checks the relevant evidence first: check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The underlying concept is that path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. After confirming the finding, a controlled remediation is to correct underlay failure detection and routing convergence within the approved topology and timer policy.

Incorrect Answers

A:

The option “Inspect installed ECMP next hops and compare per-link counters across multiple distinct flows” is useful in a different setting: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. The case being tested is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The relevant inspection is: Check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The most discriminating first check is “Check interface state, routing convergence and forwarding entries following the simulated spine-link loss”.

B:

“Inspect routing tables and underlay advertisements for each intended VTEP address” is relevant to a different condition: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. The stated question instead concerns: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The relevant inspection is: Check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The most discriminating first check is “Check interface state, routing convergence and forwarding entries following the simulated spine-link loss”.

D:

“Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints” is associated with a distinct issue: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. By contrast, the actual problem is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The relevant inspection is: Check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The most discriminating first check is “Check interface state, routing convergence and forwarding entries following the simulated spine-link loss”.

Question 561

A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. Which controlled change best addresses the described requirement?

  1. Narrow configlet selectors or tags and stage a validated corrective revision.
  2. Update the approved property set and stage dependent configurations through normal blueprint review.
  3. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration.
  4. Use a scoped blueprint query or tag selector that follows the approved object relationship.

Explanation

Correct Answer

C:

This action addresses the stated defect: create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The underlying constraint is that configlets can extend generated device configuration through controlled, scoped supplemental configuration. Verify rather than assume success: confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands.

Incorrect Answers

A:

“Narrow configlet selectors or tags and stage a validated corrective revision” is associated with a distinct issue: An engineer discovers that a supplemental configuration template was bound to an overly broad tag. By contrast, the actual problem is: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The most relevant correction is “Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration”.

B:

The option “Update the approved property set and stage dependent configurations through normal blueprint review” is useful in a different setting: A blueprint operator maintains repeated data center operational variables that should have a single validated definition. The case being tested is: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The most relevant correction is “Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration”.

D:

That choice—“Use a scoped blueprint query or tag selector that follows the approved object relationship”—addresses this other problem: An automation needs to find only leafs assigned to a particular rack, but a free-text search returns similarly named unrelated devices. Here the scenario is: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The most relevant correction is “Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration”.

Question 562

A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. Which initial check would most directly distinguish the likely cause?

  1. Compare required external routing connections with the template topology and leaf roles.
  2. Inspect selected template, interface map, device profile and advertised NOS capabilities.
  3. Compare the referenced template version and current active blueprint state before propagating design changes.
  4. Review the blueprint build validation details for missing pools, interface assignments and logical links.

Explanation

Correct Answer

C:

This checks the relevant evidence first: compare the referenced template version and current active blueprint state before propagating design changes. The underlying concept is that blueprint design inheritance and change management must be validated; editing a design object does not prove all deployed fabrics changed. After confirming the finding, a controlled remediation is to stage and review each intended blueprint update through an approved migration or change process.

Incorrect Answers

A:

That choice—“Compare required external routing connections with the template topology and leaf roles”—addresses this other problem: An engineer finishes a fabric template without any modeled north-south peering attachment points. Here the scenario is: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. The relevant inspection is: Compare the referenced template version and current active blueprint state before propagating design changes. The most discriminating first check is “Compare the referenced template version and current active blueprint state before propagating design changes”.

B:

“Inspect selected template, interface map, device profile and advertised NOS capabilities” is associated with a distinct issue: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. By contrast, the actual problem is: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. The relevant inspection is: Compare the referenced template version and current active blueprint state before propagating design changes. The most discriminating first check is “Compare the referenced template version and current active blueprint state before propagating design changes”.

D:

“Review the blueprint build validation details for missing pools, interface assignments and logical links” is relevant to a different condition: An Apstra designer tries to deploy a rack without allocating required underlay interface and IP pools. The stated question instead concerns: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. The relevant inspection is: Compare the referenced template version and current active blueprint state before propagating design changes. The most discriminating first check is “Compare the referenced template version and current active blueprint state before propagating design changes”.

Question 563

A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. Which shortcut would be most likely to undermine this objective?

  1. Trigger incidents from a single unvalidated stale sample while discarding the source telemetry.
  2. Raise the anomaly threshold to infinity because the probe currently selects unrelated devices.
  3. Disable all analytics probes because several symptoms share the same source device.
  4. Disable interface telemetry to suppress alerts caused by rising packet errors.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: disable interface telemetry to suppress alerts caused by rising packet errors. It violates the principle that Apstra IBA probes process collected telemetry against conditions or expectations and can raise anomalies. An appropriate alternative is to configure an approved probe or probe-stage threshold for the scoped leaf group and validate its data collection.

Incorrect Answers

A:

“Trigger incidents from a single unvalidated stale sample while discarding the source telemetry” is relevant to a different condition: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. The stated question instead concerns: A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. Apstra IBA probes process collected telemetry against conditions or expectations and can raise anomalies. The directly relevant unsafe shortcut is “Disable interface telemetry to suppress alerts caused by rising packet errors”.

B:

That choice—“Raise the anomaly threshold to infinity because the probe currently selects unrelated devices”—addresses this other problem: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. Here the scenario is: A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. Apstra IBA probes process collected telemetry against conditions or expectations and can raise anomalies. The directly relevant unsafe shortcut is “Disable interface telemetry to suppress alerts caused by rising packet errors”.

C:

“Disable all analytics probes because several symptoms share the same source device” is associated with a distinct issue: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. By contrast, the actual problem is: A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. Apstra IBA probes process collected telemetry against conditions or expectations and can raise anomalies. The directly relevant unsafe shortcut is “Disable interface telemetry to suppress alerts caused by rising packet errors”.

Question 564

A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. Which evidence most directly verifies the intended network outcome?

  1. Confirm the server receives fresh device state and reconciles inventory and blueprint expectations.
  2. Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.
  3. Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint.
  4. Confirm intended and running configurations are consistent and the fabric's critical paths remain operational.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm intended and running configurations are consistent and the fabric's critical paths remain operational. The decisive investigation is to compare the restored controller state against live device configuration and the latest known approved revision. The governing principle is that the controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore.

Incorrect Answers

A:

The option “Confirm the server receives fresh device state and reconciles inventory and blueprint expectations” is useful in a different setting: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. The case being tested is: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

B:

“Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied” is relevant to a different condition: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. The stated question instead concerns: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

C:

That choice—“Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint”—addresses this other problem: A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. Here the scenario is: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

Question 565

A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. Which design or operational principle best explains this behavior?

  1. Device health, intended active blueprint state and pending staged edits describe different dimensions of operations.
  2. Staged blueprint intent can differ from the deployed active revision until approved changes are committed.
  3. The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications.
  4. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints.

Explanation

Correct Answer

A:

device health, intended active blueprint state and pending staged edits describe different dimensions of operations. Here, a dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. A useful discriminating check is to compare dashboard health with active revision and pending staged configuration diffs.

Incorrect Answers

B:

The option “Staged blueprint intent can differ from the deployed active revision until approved changes are committed” is useful in a different setting: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. The case being tested is: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. Device health, intended active blueprint state and pending staged edits describe different dimensions of operations. The controlling principle is “Device health, intended active blueprint state and pending staged edits describe different dimensions of operations”.

C:

“The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications” is relevant to a different condition: A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. The stated question instead concerns: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. Device health, intended active blueprint state and pending staged edits describe different dimensions of operations. The controlling principle is “Device health, intended active blueprint state and pending staged edits describe different dimensions of operations”.

D:

That choice—“Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints”—addresses this other problem: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. Here the scenario is: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. Device health, intended active blueprint state and pending staged edits describe different dimensions of operations. The controlling principle is “Device health, intended active blueprint state and pending staged edits describe different dimensions of operations”.

Question 566

An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. Which initial check would most directly distinguish the likely cause?

  1. Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements.
  2. Compare gateway addresses, virtual MAC policy and SVI-to-VNI intent across the affected leafs.
  3. Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes.
  4. Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes. The underlying concept is that EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. After confirming the finding, a controlled remediation is to advertise and import the required host or prefix routes according to the approved ERB routing design.

Incorrect Answers

A:

That choice—“Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements”—addresses this other problem: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. Here the scenario is: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. The relevant inspection is: Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes. The most discriminating first check is “Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes”.

B:

“Compare gateway addresses, virtual MAC policy and SVI-to-VNI intent across the affected leafs” is associated with a distinct issue: Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. By contrast, the actual problem is: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. The relevant inspection is: Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes. The most discriminating first check is “Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes”.

D:

“Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF” is relevant to a different condition: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. The stated question instead concerns: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. The relevant inspection is: Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes. The most discriminating first check is “Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes”.

Question 567

A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Which evidence most directly verifies the intended network outcome?

  1. Confirm the result contains all intended rack uplinks and excludes unrelated interface objects.
  2. Confirm the graph shows the intended node relationships and end-to-end attachment tests pass.
  3. Compare query results with a known inventory sample and correct false-positive attachments.
  4. Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm the result contains all intended rack uplinks and excludes unrelated interface objects. The decisive investigation is to inspect the graph query's node types, filters and returned relationship paths for the intended rack. The governing principle is that graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint.

Incorrect Answers

B:

That choice—“Confirm the graph shows the intended node relationships and end-to-end attachment tests pass”—addresses this other problem: A visualization shows an unexpected isolated node and an engineer wants to know whether it reflects a genuine modeling error. Here the scenario is: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The direct acceptance evidence is “Confirm the result contains all intended rack uplinks and excludes unrelated interface objects”.

C:

“Compare query results with a known inventory sample and correct false-positive attachments” is associated with a distinct issue: A team needs to locate generic systems attached to leafs in a single application tag group. By contrast, the actual problem is: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The direct acceptance evidence is “Confirm the result contains all intended rack uplinks and excludes unrelated interface objects”.

D:

The option “Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests” is useful in a different setting: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. The case being tested is: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The direct acceptance evidence is “Confirm the result contains all intended rack uplinks and excludes unrelated interface objects”.

Question 568

An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Which controlled change best addresses the described requirement?

  1. Restore justified monitoring sensitivity and remediate the measured issue instead of hiding it.
  2. Correlate the observed metrics with topology and tune or remediate the validated underlying condition.
  3. Repair the verified common uplink fault and retain alert history for root-cause analysis.
  4. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics.

Explanation

Correct Answer

B:

This action addresses the stated defect: correlate the observed metrics with topology and tune or remediate the validated underlying condition. The underlying constraint is that analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. Verify rather than assume success: confirm latency measurements and anomaly state return within accepted bounds under representative traffic.

Incorrect Answers

A:

The option “Restore justified monitoring sensitivity and remediate the measured issue instead of hiding it” is useful in a different setting: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. The case being tested is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Correlate the observed metrics with topology and tune or remediate the validated underlying condition. The most relevant correction is “Correlate the observed metrics with topology and tune or remediate the validated underlying condition”.

C:

That choice—“Repair the verified common uplink fault and retain alert history for root-cause analysis”—addresses this other problem: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. Here the scenario is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Correlate the observed metrics with topology and tune or remediate the validated underlying condition. The most relevant correction is “Correlate the observed metrics with topology and tune or remediate the validated underlying condition”.

D:

“Narrow the query and probe stages to the correct blueprint nodes and monitored metrics” is associated with a distinct issue: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. By contrast, the actual problem is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Correlate the observed metrics with topology and tune or remediate the validated underlying condition. The most relevant correction is “Correlate the observed metrics with topology and tune or remediate the validated underlying condition”.

Question 569

A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. Which design or operational principle best explains this behavior?

  1. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership.
  2. The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity.
  3. A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership.
  4. VXLAN adds encapsulation overhead and requires adequate path MTU or effective payload sizing.

Explanation

Correct Answer

B:

the VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity. Here, a server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. A useful discriminating check is to inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent.

Incorrect Answers

A:

“BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership” is associated with a distinct issue: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. By contrast, the actual problem is: A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity. The controlling principle is “The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity”.

C:

“A VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership” is relevant to a different condition: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. The stated question instead concerns: A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity. The controlling principle is “The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity”.

D:

That choice—“VXLAN adds encapsulation overhead and requires adequate path MTU or effective payload sizing”—addresses this other problem: An east-west application works without tunneling but drops large payloads after VXLAN overlay migration. Here the scenario is: A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity. The controlling principle is “The VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity”.

Question 570

A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Which evidence most directly verifies the intended network outcome?

  1. Confirm the service anomaly clears and the affected workload network passes functional tests.
  2. Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms.
  3. Confirm live telemetry returns inside accepted bounds and the probe alert clears with supporting samples.
  4. Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm the service anomaly clears and the affected workload network passes functional tests. The decisive investigation is to inspect the specific service anomaly, affected objects and intended virtual-network configuration and state. The governing principle is that an Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure.

Incorrect Answers

B:

“Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms” is associated with a distinct issue: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. By contrast, the actual problem is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The direct acceptance evidence is “Confirm the service anomaly clears and the affected workload network passes functional tests”.

C:

The option “Confirm live telemetry returns inside accepted bounds and the probe alert clears with supporting samples” is useful in a different setting: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. The case being tested is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The direct acceptance evidence is “Confirm the service anomaly clears and the affected workload network passes functional tests”.

D:

“Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands” is relevant to a different condition: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. The stated question instead concerns: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The direct acceptance evidence is “Confirm the service anomaly clears and the affected workload network passes functional tests”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests