mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 16

Question 150

A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. Which initial check would most directly distinguish the likely cause?

  1. Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints.
  2. Inspect routing tables and underlay advertisements for each intended VTEP address.
  3. Check interface state, routing convergence and forwarding entries following the simulated spine-link loss.
  4. Compare the proposed physical topology with the selected reference design and expected leaf-spine connectivity.

Explanation

Correct Answer

A:

This checks the relevant evidence first: inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints. The underlying concept is that an IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. After confirming the finding, a controlled remediation is to repair the routed underlay addressing or protocol configuration and then validate overlay sessions.

Incorrect Answers

B:

“Inspect routing tables and underlay advertisements for each intended VTEP address” is associated with a distinct issue: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. By contrast, the actual problem is: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. The relevant inspection is: Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints. The most discriminating first check is “Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints”.

C:

The option “Check interface state, routing convergence and forwarding entries following the simulated spine-link loss” is useful in a different setting: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The case being tested is: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. The relevant inspection is: Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints. The most discriminating first check is “Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints”.

D:

“Compare the proposed physical topology with the selected reference design and expected leaf-spine connectivity” is relevant to a different condition: A team designs a three-stage leaf-spine fabric but wants to connect leaf switches to one another for ordinary transit. The stated question instead concerns: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. The relevant inspection is: Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints. The most discriminating first check is “Inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints”.

Question 151

An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. Which design or operational principle best explains this behavior?

  1. Configuration views represent different aspects of the managed device configuration and should be interpreted in their proper context.
  2. Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates.
  3. Staging and rendering intended configuration are distinct from committing and deploying the active blueprint.
  4. Per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly.

Explanation

Correct Answer

B:

controlled build and deploy phases separate design validation, reviewed staged changes and active device updates. Here, an Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. A useful discriminating check is to inspect pending differences and deploy status from the blueprint UI before accepting the change.

Incorrect Answers

A:

“Configuration views represent different aspects of the managed device configuration and should be interpreted in their proper context” is relevant to a different condition: A new Apstra deployment includes baseline settings, platform-specific changes and generated overlay commands that an engineer wants to distinguish. The stated question instead concerns: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates. The controlling principle is “Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates”.

C:

“Staging and rendering intended configuration are distinct from committing and deploying the active blueprint” is associated with a distinct issue: A network engineer views valid proposed changes under Staged and mistakenly assumes all devices were updated. By contrast, the actual problem is: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates. The controlling principle is “Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates”.

D:

The option “Per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly” is useful in a different setting: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The case being tested is: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates. The controlling principle is “Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates”.

Question 152

An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. Which design or operational principle best explains this behavior?

  1. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly.
  2. Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops.
  3. In a conventional Clos IP fabric, leaves connect through spines to preserve predictable equal-cost paths and scaling.
  4. Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes.

Explanation

Correct Answer

B:

equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops. Here, an operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. A useful discriminating check is to inspect installed ECMP next hops and compare per-link counters across multiple distinct flows.

Incorrect Answers

A:

The option “Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly” is useful in a different setting: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The case being tested is: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops. The controlling principle is “Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops”.

C:

That choice—“In a conventional Clos IP fabric, leaves connect through spines to preserve predictable equal-cost paths and scaling”—addresses this other problem: A migration plan connects every rack leaf laterally and treats spine devices as only optional edge routers. Here the scenario is: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops. The controlling principle is “Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops”.

D:

“Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes” is associated with a distinct issue: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. By contrast, the actual problem is: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops. The controlling principle is “Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops”.

Question 153

A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Which controlled change best addresses the described requirement?

  1. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.
  2. Use the documented recovery and reconciliation procedure before attempting broad deployment changes.
  3. Grant the minimum documented blueprint role permissions through the approved access-review process.
  4. Restore the supported device-agent connection and management credentials without bypassing security checks.

Explanation

Correct Answer

C:

This action addresses the stated defect: grant the minimum documented blueprint role permissions through the approved access-review process. The underlying constraint is that Apstra role-based access control separates read visibility from permissions to change managed fabric objects. Verify rather than assume success: confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.

Incorrect Answers

A:

“Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits” is associated with a distinct issue: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. By contrast, the actual problem is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Grant the minimum documented blueprint role permissions through the approved access-review process. The most relevant correction is “Grant the minimum documented blueprint role permissions through the approved access-review process”.

B:

The option “Use the documented recovery and reconciliation procedure before attempting broad deployment changes” is useful in a different setting: An operations team recovers a backup of the controller taken before the most recent fabric changes. The case being tested is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Grant the minimum documented blueprint role permissions through the approved access-review process. The most relevant correction is “Grant the minimum documented blueprint role permissions through the approved access-review process”.

D:

That choice—“Restore the supported device-agent connection and management credentials without bypassing security checks”—addresses this other problem: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. Here the scenario is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Grant the minimum documented blueprint role permissions through the approved access-review process. The most relevant correction is “Grant the minimum documented blueprint role permissions through the approved access-review process”.

Question 154

An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Which shortcut would be most likely to undermine this objective?

  1. Label a single-leaf rack as redundant merely because it has two host-facing ports.
  2. Count two cables as independent redundancy even when both share the same single upstream switch.
  3. Ignore port and oversubscription limits because Apstra can generate logical connections automatically.
  4. Create a new ad hoc rack type for every identical rack without checking design drift.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: create a new ad hoc rack type for every identical rack without checking design drift. It violates the principle that rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. An appropriate alternative is to create or select the approved reusable rack type and instantiate the rack consistently.

Incorrect Answers

A:

That choice—“Label a single-leaf rack as redundant merely because it has two host-facing ports”—addresses this other problem: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. Here the scenario is: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The directly relevant unsafe shortcut is “Create a new ad hoc rack type for every identical rack without checking design drift”.

B:

“Count two cables as independent redundancy even when both share the same single upstream switch” is associated with a distinct issue: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. By contrast, the actual problem is: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The directly relevant unsafe shortcut is “Create a new ad hoc rack type for every identical rack without checking design drift”.

C:

The option “Ignore port and oversubscription limits because Apstra can generate logical connections automatically” is useful in a different setting: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. The case being tested is: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The directly relevant unsafe shortcut is “Create a new ad hoc rack type for every identical rack without checking design drift”.

Question 155

An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. Which controlled change best addresses the described requirement?

  1. Correct the intended route target mapping and import policies while preserving tenant isolation.
  2. Repair EVPN endpoint advertisement and import eligibility for the affected virtual network.
  3. Correct prefix export/import and next-hop resolution for the routed EVPN IP prefix.
  4. Align approved Ethernet segment and multihoming configuration on the participating leaf devices.

Explanation

Correct Answer

B:

This action addresses the stated defect: repair EVPN endpoint advertisement and import eligibility for the affected virtual network. The underlying constraint is that EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning. Verify rather than assume success: confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic.

Incorrect Answers

A:

“Correct the intended route target mapping and import policies while preserving tenant isolation” is relevant to a different condition: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. The stated question instead concerns: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. Repair EVPN endpoint advertisement and import eligibility for the affected virtual network. The most relevant correction is “Repair EVPN endpoint advertisement and import eligibility for the affected virtual network”.

C:

“Correct prefix export/import and next-hop resolution for the routed EVPN IP prefix” is associated with a distinct issue: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. By contrast, the actual problem is: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. Repair EVPN endpoint advertisement and import eligibility for the affected virtual network. The most relevant correction is “Repair EVPN endpoint advertisement and import eligibility for the affected virtual network”.

D:

The option “Align approved Ethernet segment and multihoming configuration on the participating leaf devices” is useful in a different setting: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. The case being tested is: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. Repair EVPN endpoint advertisement and import eligibility for the affected virtual network. The most relevant correction is “Repair EVPN endpoint advertisement and import eligibility for the affected virtual network”.

Question 156

An operations dashboard must report which workload attachments inherit a specific project label. Which shortcut would be most likely to undermine this objective?

  1. Match every interface whose label includes the rack number without checking topology relationships.
  2. Delete any graph node that appears isolated without checking whether it represents a real device.
  3. Treat absence of a service configuration anomaly as proof that every application performance metric is normal.
  4. Assume a single tag-text search always represents every intended server-to-leaf relationship.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: assume a single tag-text search always represents every intended server-to-leaf relationship. It violates the principle that Apstra graph queries can combine object attributes and topological relationships for precise selection. An appropriate alternative is to use graph explorer filters and query syntax that return only the intended workload nodes.

Incorrect Answers

A:

The option “Match every interface whose label includes the rack number without checking topology relationships” is useful in a different setting: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. The case being tested is: An operations dashboard must report which workload attachments inherit a specific project label. Apstra graph queries can combine object attributes and topological relationships for precise selection. The directly relevant unsafe shortcut is “Assume a single tag-text search always represents every intended server-to-leaf relationship”.

B:

“Delete any graph node that appears isolated without checking whether it represents a real device” is relevant to a different condition: An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. The stated question instead concerns: An operations dashboard must report which workload attachments inherit a specific project label. Apstra graph queries can combine object attributes and topological relationships for precise selection. The directly relevant unsafe shortcut is “Assume a single tag-text search always represents every intended server-to-leaf relationship”.

C:

That choice—“Treat absence of a service configuration anomaly as proof that every application performance metric is normal”—addresses this other problem: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Here the scenario is: An operations dashboard must report which workload attachments inherit a specific project label. Apstra graph queries can combine object attributes and topological relationships for precise selection. The directly relevant unsafe shortcut is “Assume a single tag-text search always represents every intended server-to-leaf relationship”.

Question 157

A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Which design or operational principle best explains this behavior?

  1. Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning.
  2. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces.
  3. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements.
  4. Total spine capacity includes available physical ports and supported link-speed and topology constraints.

Explanation

Correct Answer

B:

capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. Here, a planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. A useful discriminating check is to calculate required leaf uplinks and available spine ports for projected growth under the topology template.

Incorrect Answers

A:

“Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning” is associated with a distinct issue: An architect wants consistent rack scale-out using a reference design rather than independently inventing each fabric topology. By contrast, the actual problem is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The controlling principle is “Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces”.

C:

“Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements” is relevant to a different condition: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. The stated question instead concerns: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The controlling principle is “Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces”.

D:

That choice—“Total spine capacity includes available physical ports and supported link-speed and topology constraints”—addresses this other problem: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. Here the scenario is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The controlling principle is “Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces”.

Question 158

A dual-attached server must avoid duplicate forwarding when its two participating leaf devices share an Ethernet segment. Which initial check would most directly distinguish the likely cause?

  1. Inspect per-VRF and per-virtual-network route target communities and import/export decisions.
  2. Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF.
  3. Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop.
  4. Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs.

Explanation

Correct Answer

D:

This checks the relevant evidence first: inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs. The underlying concept is that EVPN Ethernet segment identification and designated-forwarder behavior coordinate multihomed Ethernet reachability. After confirming the finding, a controlled remediation is to align approved Ethernet segment and multihoming configuration on the participating leaf devices.

Incorrect Answers

A:

That choice—“Inspect per-VRF and per-virtual-network route target communities and import/export decisions”—addresses this other problem: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. Here the scenario is: A dual-attached server must avoid duplicate forwarding when its two participating leaf devices share an Ethernet segment. The relevant inspection is: Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs. The most discriminating first check is “Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs”.

B:

“Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF” is associated with a distinct issue: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. By contrast, the actual problem is: A dual-attached server must avoid duplicate forwarding when its two participating leaf devices share an Ethernet segment. The relevant inspection is: Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs. The most discriminating first check is “Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs”.

C:

The option “Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop” is useful in a different setting: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. The case being tested is: A dual-attached server must avoid duplicate forwarding when its two participating leaf devices share an Ethernet segment. The relevant inspection is: Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs. The most discriminating first check is “Inspect Ethernet segment identifiers, multihoming state and designated-forwarder election on the relevant leafs”.

Question 159

A monitoring dashboard shows a device as green but telemetry timestamps stopped updating 20 minutes earlier. Which controlled change best addresses the described requirement?

  1. Configure a supported protected syslog destination with the required log categories and retention policy.
  2. Preserve audit records and review the specific committed change before a controlled correction.
  3. Document the causal change and correct the failed deployment through an auditable workflow.
  4. Restore data collection and mark stale measurements as unknown rather than healthy.

Explanation

Correct Answer

D:

This action addresses the stated defect: restore data collection and mark stale measurements as unknown rather than healthy. The underlying constraint is that monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection. Verify rather than assume success: verify current samples arrive and synthetic test conditions create expected alarms.

Incorrect Answers

A:

“Configure a supported protected syslog destination with the required log categories and retention policy” is relevant to a different condition: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. The stated question instead concerns: A monitoring dashboard shows a device as green but telemetry timestamps stopped updating 20 minutes earlier. Restore data collection and mark stale measurements as unknown rather than healthy. The most relevant correction is “Restore data collection and mark stale measurements as unknown rather than healthy”.

B:

That choice—“Preserve audit records and review the specific committed change before a controlled correction”—addresses this other problem: An operator needs to explain who committed a change after a rack lost connectivity overnight. Here the scenario is: A monitoring dashboard shows a device as green but telemetry timestamps stopped updating 20 minutes earlier. Restore data collection and mark stale measurements as unknown rather than healthy. The most relevant correction is “Restore data collection and mark stale measurements as unknown rather than healthy”.

C:

“Document the causal change and correct the failed deployment through an auditable workflow” is associated with a distinct issue: A team needs to identify whether a failed deployment arose from system automation or an approved human change. By contrast, the actual problem is: A monitoring dashboard shows a device as green but telemetry timestamps stopped updating 20 minutes earlier. Restore data collection and mark stale measurements as unknown rather than healthy. The most relevant correction is “Restore data collection and mark stale measurements as unknown rather than healthy”.

Question 160

A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Which design or operational principle best explains this behavior?

  1. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity.
  2. Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity.
  3. Unique accurate managed device identities are required for safe inventory and blueprint allocation.
  4. Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates.

Explanation

Correct Answer

A:

device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. Here, a failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. A useful discriminating check is to review device replacement workflow, old/new system identifiers and required port/profile compatibility.

Incorrect Answers

B:

“Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity” is relevant to a different condition: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. The stated question instead concerns: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. The controlling principle is “Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity”.

C:

That choice—“Unique accurate managed device identities are required for safe inventory and blueprint allocation”—addresses this other problem: A deployment team duplicates a device-system ID when registering two new leaf switches. Here the scenario is: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. The controlling principle is “Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity”.

D:

“Controlled build and deploy phases separate design validation, reviewed staged changes and active device updates” is associated with a distinct issue: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. By contrast, the actual problem is: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. The controlling principle is “Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests