mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 14

Question 130

Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Which evidence most directly verifies the intended network outcome?

  1. Verify logical port mappings, rendered configuration and fabric services recover on the new physical device.
  2. Confirm each device has one accurate unique inventory record and intended blueprint role.
  3. Confirm the device appears healthy, available and uniquely identified for blueprint assignment.
  4. Confirm active intent, device configuration and required network tests agree on the intended result.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm each device has one accurate unique inventory record and intended blueprint role. The decisive investigation is to compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices. The governing principle is that unique accurate managed device identities are required for safe inventory and blueprint allocation.

Incorrect Answers

A:

That choice—“Verify logical port mappings, rendered configuration and fabric services recover on the new physical device”—addresses this other problem: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Here the scenario is: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The direct acceptance evidence is “Confirm each device has one accurate unique inventory record and intended blueprint role”.

C:

The option “Confirm the device appears healthy, available and uniquely identified for blueprint assignment” is useful in a different setting: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. The case being tested is: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The direct acceptance evidence is “Confirm each device has one accurate unique inventory record and intended blueprint role”.

D:

“Confirm active intent, device configuration and required network tests agree on the intended result” is relevant to a different condition: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. The stated question instead concerns: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The direct acceptance evidence is “Confirm each device has one accurate unique inventory record and intended blueprint role”.

Question 131

A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. Which initial check would most directly distinguish the likely cause?

  1. Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF.
  2. Compare route distinguishers, route targets and actual VRF import policy for each tenant.
  3. Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop.
  4. Inspect per-VRF and per-virtual-network route target communities and import/export decisions.

Explanation

Correct Answer

D:

This checks the relevant evidence first: inspect per-VRF and per-virtual-network route target communities and import/export decisions. The underlying concept is that matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. After confirming the finding, a controlled remediation is to correct the intended route target mapping and import policies while preserving tenant isolation.

Incorrect Answers

A:

“Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF” is relevant to a different condition: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. The stated question instead concerns: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. The relevant inspection is: Inspect per-VRF and per-virtual-network route target communities and import/export decisions. The most discriminating first check is “Inspect per-VRF and per-virtual-network route target communities and import/export decisions”.

B:

That choice—“Compare route distinguishers, route targets and actual VRF import policy for each tenant”—addresses this other problem: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. Here the scenario is: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. The relevant inspection is: Inspect per-VRF and per-virtual-network route target communities and import/export decisions. The most discriminating first check is “Inspect per-VRF and per-virtual-network route target communities and import/export decisions”.

C:

“Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop” is associated with a distinct issue: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. By contrast, the actual problem is: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. The relevant inspection is: Inspect per-VRF and per-virtual-network route target communities and import/export decisions. The most discriminating first check is “Inspect per-VRF and per-virtual-network route target communities and import/export decisions”.

Question 132

A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Which design or operational principle best explains this behavior?

  1. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations.
  2. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies.
  3. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints.
  4. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure.

Explanation

Correct Answer

D:

an Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. Here, a blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. A useful discriminating check is to inspect the specific service anomaly, affected objects and intended virtual-network configuration and state.

Incorrect Answers

A:

The option “Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations” is useful in a different setting: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. The case being tested is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The controlling principle is “An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure”.

B:

“Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies” is relevant to a different condition: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. The stated question instead concerns: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The controlling principle is “An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure”.

C:

That choice—“Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints”—addresses this other problem: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. Here the scenario is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. The controlling principle is “An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure”.

Question 133

An operator wants to identify managed nodes by rack and role in the blueprint graph. Which initial check would most directly distinguish the likely cause?

  1. Inspect object types, graph relationship properties and returned identities for the intended rack.
  2. Query the relevant virtual-network and endpoint objects with validated tag criteria.
  3. Inspect anomaly type and affected graph nodes before selecting the next technical investigation.
  4. Inspect property-set values, consumers and intended scope before updating a shared parameter.

Explanation

Correct Answer

A:

This checks the relevant evidence first: inspect object types, graph relationship properties and returned identities for the intended rack. The underlying concept is that blueprint graph and object queries can select devices using modeled relationships rather than fragile substring matches. After confirming the finding, a controlled remediation is to use a scoped blueprint query or tag selector that follows the approved object relationship.

Incorrect Answers

B:

The option “Query the relevant virtual-network and endpoint objects with validated tag criteria” is useful in a different setting: A team wants to locate every virtual network owned by a particular application during a migration. The case being tested is: An operator wants to identify managed nodes by rack and role in the blueprint graph. The relevant inspection is: Inspect object types, graph relationship properties and returned identities for the intended rack. The most discriminating first check is “Inspect object types, graph relationship properties and returned identities for the intended rack”.

C:

“Inspect anomaly type and affected graph nodes before selecting the next technical investigation” is relevant to a different condition: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. The stated question instead concerns: An operator wants to identify managed nodes by rack and role in the blueprint graph. The relevant inspection is: Inspect object types, graph relationship properties and returned identities for the intended rack. The most discriminating first check is “Inspect object types, graph relationship properties and returned identities for the intended rack”.

D:

That choice—“Inspect property-set values, consumers and intended scope before updating a shared parameter”—addresses this other problem: A blueprint operator maintains repeated data center operational variables that should have a single validated definition. Here the scenario is: An operator wants to identify managed nodes by rack and role in the blueprint graph. The relevant inspection is: Inspect object types, graph relationship properties and returned identities for the intended rack. The most discriminating first check is “Inspect object types, graph relationship properties and returned identities for the intended rack”.

Question 134

A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Which evidence most directly verifies the intended network outcome?

  1. Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable.
  2. Verify sanctioned intersite application flows and absence of unauthorized tenant route propagation.
  3. Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked.
  4. Confirm the host receives exactly the intended VLANs and no unrelated tenant traffic.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable. The decisive investigation is to compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment. The governing principle is that hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service.

Incorrect Answers

B:

“Verify sanctioned intersite application flows and absence of unauthorized tenant route propagation” is associated with a distinct issue: A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. By contrast, the actual problem is: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The direct acceptance evidence is “Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable”.

C:

The option “Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked” is useful in a different setting: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. The case being tested is: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The direct acceptance evidence is “Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable”.

D:

“Confirm the host receives exactly the intended VLANs and no unrelated tenant traffic” is relevant to a different condition: A generic system connects to a leaf with one untagged network and a small approved list of tagged VNs. The stated question instead concerns: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The direct acceptance evidence is “Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable”.

Question 135

A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Which controlled change best addresses the described requirement?

  1. Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability.
  2. Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs.
  3. Repair the routed underlay addressing or protocol configuration and then validate overlay sessions.
  4. Correct underlay failure detection and routing convergence within the approved topology and timer policy.

Explanation

Correct Answer

D:

This action addresses the stated defect: correct underlay failure detection and routing convergence within the approved topology and timer policy. The underlying constraint is that path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. Verify rather than assume success: prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective.

Incorrect Answers

A:

“Advertise the approved VTEP loopbacks through the fabric underlay and check next-hop reachability” is relevant to a different condition: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. The stated question instead concerns: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Correct underlay failure detection and routing convergence within the approved topology and timer policy. The most relevant correction is “Correct underlay failure detection and routing convergence within the approved topology and timer policy”.

B:

That choice—“Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs”—addresses this other problem: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. Here the scenario is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Correct underlay failure detection and routing convergence within the approved topology and timer policy. The most relevant correction is “Correct underlay failure detection and routing convergence within the approved topology and timer policy”.

C:

“Repair the routed underlay addressing or protocol configuration and then validate overlay sessions” is associated with a distinct issue: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. By contrast, the actual problem is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Correct underlay failure detection and routing convergence within the approved topology and timer policy. The most relevant correction is “Correct underlay failure detection and routing convergence within the approved topology and timer policy”.

Question 136

A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. Which controlled change best addresses the described requirement?

  1. Configure the supported aggregation and alert conditions with documented baseline behavior.
  2. Configure an approved probe or probe-stage threshold for the scoped leaf group and validate its data collection.
  3. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics.
  4. Construct a scoped graph query based on blueprint entities and their physical connectivity.

Explanation

Correct Answer

A:

This action addresses the stated defect: configure the supported aggregation and alert conditions with documented baseline behavior. The underlying constraint is that IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly. Verify rather than assume success: verify staged derived metrics match sample inputs and test threshold crossings produce accurate alarms.

Incorrect Answers

B:

“Configure an approved probe or probe-stage threshold for the scoped leaf group and validate its data collection” is relevant to a different condition: A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. The stated question instead concerns: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. The governing requirement is to Configure the supported aggregation and alert conditions with documented baseline behavior. The most relevant correction is “Configure the supported aggregation and alert conditions with documented baseline behavior”.

C:

That choice—“Narrow the query and probe stages to the correct blueprint nodes and monitored metrics”—addresses this other problem: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. Here the scenario is: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. The governing requirement is to Configure the supported aggregation and alert conditions with documented baseline behavior. The most relevant correction is “Configure the supported aggregation and alert conditions with documented baseline behavior”.

D:

“Construct a scoped graph query based on blueprint entities and their physical connectivity” is associated with a distinct issue: An analyst wants to find all uplinks belonging to a specific rack while avoiding assumptions based on interface names. By contrast, the actual problem is: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. The governing requirement is to Configure the supported aggregation and alert conditions with documented baseline behavior. The most relevant correction is “Configure the supported aggregation and alert conditions with documented baseline behavior”.

Question 137

Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. Which design or operational principle best explains this behavior?

  1. Staged blueprint intent can differ from the deployed active revision until approved changes are committed.
  2. Device health, intended active blueprint state and pending staged edits describe different dimensions of operations.
  3. The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications.
  4. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision.

Explanation

Correct Answer

C:

the set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications. Here, two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. A useful discriminating check is to inspect the Uncommitted diff and attribution for every pending blueprint change.

Incorrect Answers

A:

“Staged blueprint intent can differ from the deployed active revision until approved changes are committed” is associated with a distinct issue: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. By contrast, the actual problem is: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications. The controlling principle is “The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications”.

B:

The option “Device health, intended active blueprint state and pending staged edits describe different dimensions of operations” is useful in a different setting: A network team needs to distinguish observed operational health from whether the desired blueprint configuration is active. The case being tested is: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications. The controlling principle is “The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications”.

D:

That choice—“Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision”—addresses this other problem: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. Here the scenario is: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications. The controlling principle is “The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications”.

Question 138

A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. Which shortcut would be most likely to undermine this objective?

  1. Reboot every leaf because all anomaly types allegedly mean the same physical fault.
  2. Dismiss all service anomalies merely because the underlying physical links are up.
  3. Delete the probe because no service-configuration mismatch appears on the dashboard.
  4. Interpret a green dashboard as proof that every staged change has already been committed.

Explanation

Correct Answer

C:

This is the unsafe shortcut to avoid: delete the probe because no service-configuration mismatch appears on the dashboard. It violates the principle that probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. An appropriate alternative is to investigate the measured condition and adjust the approved monitored system or justified probe threshold.

Incorrect Answers

A:

That choice—“Reboot every leaf because all anomaly types allegedly mean the same physical fault”—addresses this other problem: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Here the scenario is: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. The directly relevant unsafe shortcut is “Delete the probe because no service-configuration mismatch appears on the dashboard”.

B:

“Dismiss all service anomalies merely because the underlying physical links are up” is associated with a distinct issue: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. By contrast, the actual problem is: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. The directly relevant unsafe shortcut is “Delete the probe because no service-configuration mismatch appears on the dashboard”.

D:

“Interpret a green dashboard as proof that every staged change has already been committed” is relevant to a different condition: A network team needs to distinguish observed operational health from whether the desired blueprint configuration is active. The stated question instead concerns: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. The directly relevant unsafe shortcut is “Delete the probe because no service-configuration mismatch appears on the dashboard”.

Question 139

A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Which shortcut would be most likely to undermine this objective?

  1. Assume future leaf switches can be attached even after every suitable spine port is consumed.
  2. Bypass reference design validation and hand-wire devices into an arbitrary topology.
  3. Force generated configuration onto an unsupported NOS and disable syntax checking.
  4. Select an unsuitable reference design solely because it minimizes the initial number of switches.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: select an unsuitable reference design solely because it minimizes the initial number of switches. It violates the principle that reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. An appropriate alternative is to choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints.

Incorrect Answers

A:

“Assume future leaf switches can be attached even after every suitable spine port is consumed” is relevant to a different condition: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. The stated question instead concerns: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The directly relevant unsafe shortcut is “Select an unsuitable reference design solely because it minimizes the initial number of switches”.

B:

That choice—“Bypass reference design validation and hand-wire devices into an arbitrary topology”—addresses this other problem: An architect wants consistent rack scale-out using a reference design rather than independently inventing each fabric topology. Here the scenario is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The directly relevant unsafe shortcut is “Select an unsuitable reference design solely because it minimizes the initial number of switches”.

C:

“Force generated configuration onto an unsupported NOS and disable syntax checking” is associated with a distinct issue: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. By contrast, the actual problem is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The directly relevant unsafe shortcut is “Select an unsuitable reference design solely because it minimizes the initial number of switches”.

Question 140

An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. Which initial check would most directly distinguish the likely cause?

  1. Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent.
  2. Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods.
  3. Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability.
  4. Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The underlying concept is that a VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership. After confirming the finding, a controlled remediation is to restore routed reachability to the advertised VTEP and the correct tunnel forwarding state.

Incorrect Answers

A:

The option “Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent” is useful in a different setting: A rack migration assigns the correct switch access VLAN but places the VTEP into another tenant's virtual network identifier. The case being tested is: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. The relevant inspection is: Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The most discriminating first check is “Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability”.

B:

“Inspect EVPN route exchange and the selected VTEP's learned endpoint state instead of inferring learning from floods” is relevant to a different condition: An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. The stated question instead concerns: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. The relevant inspection is: Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The most discriminating first check is “Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability”.

D:

“Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs” is associated with a distinct issue: A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. By contrast, the actual problem is: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. The relevant inspection is: Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability. The most discriminating first check is “Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests