mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 12

Question 110

A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. Which controlled change best addresses the described requirement?

  1. Create or correct a scoped connectivity template and routing policy for the authorized VRF.
  2. Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment.
  3. Bind only authorized tagged and untagged VN attachments to the selected generic-system port.
  4. Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability.

Explanation

Correct Answer

C:

This action addresses the stated defect: bind only authorized tagged and untagged VN attachments to the selected generic-system port. The underlying constraint is that connectivity templates define host-facing virtual-network endpoint membership and tagging behavior. Verify rather than assume success: confirm the host receives exactly the intended VLANs and no unrelated tenant traffic.

Incorrect Answers

A:

That choice—“Create or correct a scoped connectivity template and routing policy for the authorized VRF”—addresses this other problem: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Here the scenario is: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. Bind only authorized tagged and untagged VN attachments to the selected generic-system port. The most relevant correction is “Bind only authorized tagged and untagged VN attachments to the selected generic-system port”.

B:

“Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment” is associated with a distinct issue: A route export template applied to a border device advertises all tenant prefixes beyond the data center. By contrast, the actual problem is: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. Bind only authorized tagged and untagged VN attachments to the selected generic-system port. The most relevant correction is “Bind only authorized tagged and untagged VN attachments to the selected generic-system port”.

D:

“Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability” is relevant to a different condition: A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. The stated question instead concerns: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. Bind only authorized tagged and untagged VN attachments to the selected generic-system port. The most relevant correction is “Bind only authorized tagged and untagged VN attachments to the selected generic-system port”.

Question 111

A provider deploys two isolated VRFs containing identical IP prefixes in distinct tenant spaces. Which evidence most directly verifies the intended network outcome?

  1. Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF.
  2. Observe each VRF learns only the intended tenant routes despite overlapping address space.
  3. Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network.
  4. Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic.

Explanation

Correct Answer

B:

This directly tests the desired result: observe each VRF learns only the intended tenant routes despite overlapping address space. The decisive investigation is to compare route distinguishers, route targets and actual VRF import policy for each tenant. The governing principle is that EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution.

Incorrect Answers

A:

“Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF” is relevant to a different condition: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. The stated question instead concerns: A provider deploys two isolated VRFs containing identical IP prefixes in distinct tenant spaces. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The direct acceptance evidence is “Observe each VRF learns only the intended tenant routes despite overlapping address space”.

C:

“Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network” is associated with a distinct issue: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. By contrast, the actual problem is: A provider deploys two isolated VRFs containing identical IP prefixes in distinct tenant spaces. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The direct acceptance evidence is “Observe each VRF learns only the intended tenant routes despite overlapping address space”.

D:

The option “Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic” is useful in a different setting: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. The case being tested is: A provider deploys two isolated VRFs containing identical IP prefixes in distinct tenant spaces. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The direct acceptance evidence is “Observe each VRF learns only the intended tenant routes despite overlapping address space”.

Question 112

A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Which controlled change best addresses the described requirement?

  1. Correct physical cabling or update the approved design only after confirming the intended topology.
  2. Update the correct physical patching or approved blueprint mapping in one controlled change.
  3. Resolve the specific failed device deployment and reapply the approved configuration to that device.
  4. Review and commit the approved staged change using the documented deployment process.

Explanation

Correct Answer

A:

This action addresses the stated defect: correct physical cabling or update the approved design only after confirming the intended topology. The underlying constraint is that cabling validation compares observed neighbor links against intended device/interface relationships. Verify rather than assume success: confirm discovered links match the staged cable map and link-state anomalies clear.

Incorrect Answers

B:

“Update the correct physical patching or approved blueprint mapping in one controlled change” is relevant to a different condition: A staging team has different cable-map snapshots from design and observed discovery data. The stated question instead concerns: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Correct physical cabling or update the approved design only after confirming the intended topology. The most relevant correction is “Correct physical cabling or update the approved design only after confirming the intended topology”.

C:

That choice—“Resolve the specific failed device deployment and reapply the approved configuration to that device”—addresses this other problem: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. Here the scenario is: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Correct physical cabling or update the approved design only after confirming the intended topology. The most relevant correction is “Correct physical cabling or update the approved design only after confirming the intended topology”.

D:

“Review and commit the approved staged change using the documented deployment process” is associated with a distinct issue: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. By contrast, the actual problem is: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Correct physical cabling or update the approved design only after confirming the intended topology. The most relevant correction is “Correct physical cabling or update the approved design only after confirming the intended topology”.

Question 113

A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. Which shortcut would be most likely to undermine this objective?

  1. Assume an old green device status proves the agent is still collecting current data.
  2. Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient.
  3. Assume restoring an older controller database automatically rolls back all switches to the same moment.
  4. Force an unsupported image into production and trust that agent discovery alone guarantees compatibility.

Explanation

Correct Answer

C:

This is the unsafe shortcut to avoid: assume restoring an older controller database automatically rolls back all switches to the same moment. It violates the principle that the controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. An appropriate alternative is to use the documented recovery and reconciliation procedure before attempting broad deployment changes.

Incorrect Answers

A:

“Assume an old green device status proves the agent is still collecting current data” is associated with a distinct issue: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. By contrast, the actual problem is: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The directly relevant unsafe shortcut is “Assume restoring an older controller database automatically rolls back all switches to the same moment”.

B:

The option “Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient” is useful in a different setting: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. The case being tested is: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The directly relevant unsafe shortcut is “Assume restoring an older controller database automatically rolls back all switches to the same moment”.

D:

That choice—“Force an unsupported image into production and trust that agent discovery alone guarantees compatibility”—addresses this other problem: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Here the scenario is: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The directly relevant unsafe shortcut is “Assume restoring an older controller database automatically rolls back all switches to the same moment”.

Question 114

A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. Which evidence most directly verifies the intended network outcome?

  1. Confirm the server receives fresh device state and reconciles inventory and blueprint expectations.
  2. Confirm intended and running configurations are consistent and the fabric's critical paths remain operational.
  3. Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint.
  4. Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm the server receives fresh device state and reconciles inventory and blueprint expectations. The decisive investigation is to inspect device-agent health, controller connectivity, authentication and management-path reachability. The governing principle is that the Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model.

Incorrect Answers

B:

“Confirm intended and running configurations are consistent and the fabric's critical paths remain operational” is associated with a distinct issue: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. By contrast, the actual problem is: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. The Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model. The direct acceptance evidence is “Confirm the server receives fresh device state and reconciles inventory and blueprint expectations”.

C:

The option “Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint” is useful in a different setting: A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. The case being tested is: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. The Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model. The direct acceptance evidence is “Confirm the server receives fresh device state and reconciles inventory and blueprint expectations”.

D:

“Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied” is relevant to a different condition: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. The stated question instead concerns: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. The Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model. The direct acceptance evidence is “Confirm the server receives fresh device state and reconciles inventory and blueprint expectations”.

Question 115

An Apstra design runs out of loopback addresses when adding an additional leaf group. Which evidence most directly verifies the intended network outcome?

  1. Confirm each active virtual network has the intended unique or explicitly shared VNI mapping.
  2. Verify all new logical devices receive unique assigned addresses and route reachability remains correct.
  3. Validate logical port counts and generated rack connections before building the blueprint.
  4. Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites.

Explanation

Correct Answer

B:

This directly tests the desired result: verify all new logical devices receive unique assigned addresses and route reachability remains correct. The decisive investigation is to inspect pool size, consumed allocations and required identifiers for all logical devices. The governing principle is that resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers.

Incorrect Answers

A:

“Confirm each active virtual network has the intended unique or explicitly shared VNI mapping” is relevant to a different condition: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. The stated question instead concerns: An Apstra design runs out of loopback addresses when adding an additional leaf group. Resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers. The direct acceptance evidence is “Verify all new logical devices receive unique assigned addresses and route reachability remains correct”.

C:

“Validate logical port counts and generated rack connections before building the blueprint” is associated with a distinct issue: A rack template chooses a logical device with insufficient server ports for its planned generic systems. By contrast, the actual problem is: An Apstra design runs out of loopback addresses when adding an additional leaf group. Resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers. The direct acceptance evidence is “Verify all new logical devices receive unique assigned addresses and route reachability remains correct”.

D:

The option “Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites” is useful in a different setting: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. The case being tested is: An Apstra design runs out of loopback addresses when adding an additional leaf group. Resource pools need sufficient unique allocations for loopback, fabric subnet and other network identifiers. The direct acceptance evidence is “Verify all new logical devices receive unique assigned addresses and route reachability remains correct”.

Question 116

A team needs to locate generic systems attached to leafs in a single application tag group. Which evidence most directly verifies the intended network outcome?

  1. Compare query results with a known inventory sample and correct false-positive attachments.
  2. Confirm the result contains all intended rack uplinks and excludes unrelated interface objects.
  3. Confirm the graph shows the intended node relationships and end-to-end attachment tests pass.
  4. Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests.

Explanation

Correct Answer

A:

This directly tests the desired result: compare query results with a known inventory sample and correct false-positive attachments. The decisive investigation is to test a query for tag attributes and related generic-system attachments in the target blueprint. The governing principle is that Apstra graph queries can combine object attributes and topological relationships for precise selection.

Incorrect Answers

B:

“Confirm the result contains all intended rack uplinks and excludes unrelated interface objects” is relevant to a different condition: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. The stated question instead concerns: A team needs to locate generic systems attached to leafs in a single application tag group. Apstra graph queries can combine object attributes and topological relationships for precise selection. The direct acceptance evidence is “Compare query results with a known inventory sample and correct false-positive attachments”.

C:

That choice—“Confirm the graph shows the intended node relationships and end-to-end attachment tests pass”—addresses this other problem: A visualization shows an unexpected isolated node and an engineer wants to know whether it reflects a genuine modeling error. Here the scenario is: A team needs to locate generic systems attached to leafs in a single application tag group. Apstra graph queries can combine object attributes and topological relationships for precise selection. The direct acceptance evidence is “Compare query results with a known inventory sample and correct false-positive attachments”.

D:

“Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests” is associated with a distinct issue: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. By contrast, the actual problem is: A team needs to locate generic systems attached to leafs in a single application tag group. Apstra graph queries can combine object attributes and topological relationships for precise selection. The direct acceptance evidence is “Compare query results with a known inventory sample and correct false-positive attachments”.

Question 117

An analyst wants to find all uplinks belonging to a specific rack while avoiding assumptions based on interface names. Which evidence most directly verifies the intended network outcome?

  1. Confirm the graph shows the intended node relationships and end-to-end attachment tests pass.
  2. Confirm the result contains all intended rack uplinks and excludes unrelated interface objects.
  3. Compare query results with a known inventory sample and correct false-positive attachments.
  4. Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm the result contains all intended rack uplinks and excludes unrelated interface objects. The decisive investigation is to inspect the graph query's node types, filters and returned relationship paths for the intended rack. The governing principle is that graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint.

Incorrect Answers

A:

“Confirm the graph shows the intended node relationships and end-to-end attachment tests pass” is associated with a distinct issue: A visualization shows an unexpected isolated node and an engineer wants to know whether it reflects a genuine modeling error. By contrast, the actual problem is: An analyst wants to find all uplinks belonging to a specific rack while avoiding assumptions based on interface names. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The direct acceptance evidence is “Confirm the result contains all intended rack uplinks and excludes unrelated interface objects”.

C:

“Compare query results with a known inventory sample and correct false-positive attachments” is relevant to a different condition: An operations dashboard must report which workload attachments inherit a specific project label. The stated question instead concerns: An analyst wants to find all uplinks belonging to a specific rack while avoiding assumptions based on interface names. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The direct acceptance evidence is “Confirm the result contains all intended rack uplinks and excludes unrelated interface objects”.

D:

That choice—“Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests”—addresses this other problem: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. Here the scenario is: An analyst wants to find all uplinks belonging to a specific rack while avoiding assumptions based on interface names. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The direct acceptance evidence is “Confirm the result contains all intended rack uplinks and excludes unrelated interface objects”.

Question 118

A deployment team duplicates a device-system ID when registering two new leaf switches. Which design or operational principle best explains this behavior?

  1. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity.
  2. Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity.
  3. Per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly.
  4. Unique accurate managed device identities are required for safe inventory and blueprint allocation.

Explanation

Correct Answer

D:

unique accurate managed device identities are required for safe inventory and blueprint allocation. Here, a deployment team duplicates a device-system ID when registering two new leaf switches. A useful discriminating check is to compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices.

Incorrect Answers

A:

That choice—“Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity”—addresses this other problem: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Here the scenario is: A deployment team duplicates a device-system ID when registering two new leaf switches. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The controlling principle is “Unique accurate managed device identities are required for safe inventory and blueprint allocation”.

B:

“Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity” is associated with a distinct issue: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. By contrast, the actual problem is: A deployment team duplicates a device-system ID when registering two new leaf switches. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The controlling principle is “Unique accurate managed device identities are required for safe inventory and blueprint allocation”.

C:

The option “Per-device deployment and configuration status must be inspected rather than assuming a blueprint commit succeeded uniformly” is useful in a different setting: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The case being tested is: A deployment team duplicates a device-system ID when registering two new leaf switches. Unique accurate managed device identities are required for safe inventory and blueprint allocation. The controlling principle is “Unique accurate managed device identities are required for safe inventory and blueprint allocation”.

Question 119

An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. Which evidence most directly verifies the intended network outcome?

  1. Observe valid endpoint advertisements with less dependence on unknown-destination flooding for known endpoints.
  2. Measure expected BUM replication only among authorized VTEPs and improved traffic counters.
  3. Confirm encapsulated packets reach the intended VTEP and are decapsulated to the authorized bridge domain.
  4. Confirm representative maximum-size payloads traverse the VXLAN overlay without fragmentation-related drops.

Explanation

Correct Answer

B:

This directly tests the desired result: measure expected BUM replication only among authorized VTEPs and improved traffic counters. The decisive investigation is to inspect broadcast, unknown-unicast and multicast handling and participating VTEPs for the affected VNI. The governing principle is that BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership.

Incorrect Answers

A:

“Observe valid endpoint advertisements with less dependence on unknown-destination flooding for known endpoints” is relevant to a different condition: A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. The stated question instead concerns: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership. The direct acceptance evidence is “Measure expected BUM replication only among authorized VTEPs and improved traffic counters”.

C:

“Confirm encapsulated packets reach the intended VTEP and are decapsulated to the authorized bridge domain” is associated with a distinct issue: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. By contrast, the actual problem is: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership. The direct acceptance evidence is “Measure expected BUM replication only among authorized VTEPs and improved traffic counters”.

D:

The option “Confirm representative maximum-size payloads traverse the VXLAN overlay without fragmentation-related drops” is useful in a different setting: An east-west application works without tunneling but drops large payloads after VXLAN overlay migration. The case being tested is: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. BUM replication behavior and EVPN learning strategy must be scoped to the intended VXLAN membership. The direct acceptance evidence is “Measure expected BUM replication only among authorized VTEPs and improved traffic counters”.

Question 120

An operations team adds a hypervisor pair whose access ports are not modeled in Apstra generic-system inventory. Which initial check would most directly distinguish the likely cause?

  1. Compare pristine baseline, incremental changes and final rendered config against the active blueprint.
  2. Inspect the intended leaf attachment ports, generic-system definition and relevant cable map.
  3. Check current spine port availability, resource pools and the proposed rack type against the active blueprint.
  4. Inspect configlet attachment criteria and generated configuration diffs for all matching targets.

Explanation

Correct Answer

B:

This checks the relevant evidence first: inspect the intended leaf attachment ports, generic-system definition and relevant cable map. The underlying concept is that generic systems represent attached external workloads and can be modeled with their interfaces and supported connectivity patterns. After confirming the finding, a controlled remediation is to create or update the authorized generic system and its connectivity template within the staged blueprint.

Incorrect Answers

A:

The option “Compare pristine baseline, incremental changes and final rendered config against the active blueprint” is useful in a different setting: An audit asks why some device commands come from the baseline while others appear from intended virtual-network configuration. The case being tested is: An operations team adds a hypervisor pair whose access ports are not modeled in Apstra generic-system inventory. The relevant inspection is: Inspect the intended leaf attachment ports, generic-system definition and relevant cable map. The most discriminating first check is “Inspect the intended leaf attachment ports, generic-system definition and relevant cable map”.

C:

That choice—“Check current spine port availability, resource pools and the proposed rack type against the active blueprint”—addresses this other problem: A data center needs to add another rack to a production fabric without replacing the existing blueprint. Here the scenario is: An operations team adds a hypervisor pair whose access ports are not modeled in Apstra generic-system inventory. The relevant inspection is: Inspect the intended leaf attachment ports, generic-system definition and relevant cable map. The most discriminating first check is “Inspect the intended leaf attachment ports, generic-system definition and relevant cable map”.

D:

“Inspect configlet attachment criteria and generated configuration diffs for all matching targets” is associated with a distinct issue: A new configlet unexpectedly adds a command to spine switches when it was intended for a single border leaf. By contrast, the actual problem is: An operations team adds a hypervisor pair whose access ports are not modeled in Apstra generic-system inventory. The relevant inspection is: Inspect the intended leaf attachment ports, generic-system definition and relevant cable map. The most discriminating first check is “Inspect the intended leaf attachment ports, generic-system definition and relevant cable map”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests