mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 29

Question 280

An OSPF packet capture shows Link State Updates but the route remains hidden from the active table. Which corrective action and confirmation pair is most appropriate?

  1. Control: Add a precise prefix and instance match, then inspect effective imports. Accepted result: The allowed service routes import and the forbidden more-specific prefixes do not.
  2. Action: Select the correct network-type behavior and inspect the neighbor-state model. Evidence: The point-to-point adjacency forms without an unnecessary DR election.
  3. Repair: Compare received LSAs with route selection, area eligibility and next-hop resolution. Check: The routing table exposes the selection reason and the intended route is installed.
  4. Change: Apply a safe approved OSPF process refresh and verify advertised router identity. Test: All neighbors record the new unique ID and routing stability is restored.

Explanation

Correct Answer

C:

This option addresses the stated case rather than another networking issue. Principle: Receiving topology data does not guarantee a route becomes active and installed. Remedy: Compare received LSAs with route selection, area eligibility and next-hop resolution. Proof: The routing table exposes the selection reason and the intended route is installed.

Incorrect Answers

A:

This answer would be more suitable when a route import policy accepts more-specific destinations that should remain isolated inside a wholesale tenant, where the corrective action is to add a precise prefix and instance match, then inspect effective imports. The failure here is different: Receiving topology data does not guarantee a route becomes active and installed. Required validation: The routing table exposes the selection reason and the intended route is installed.

B:

This option overlooks the decisive condition. Its supporting principle is dR and BDR elections apply to broadcast or NBMA segments, not ordinary point-to-point links, while this scenario depends on receiving topology data does not guarantee a route becomes active and installed. Verify the correction with: The routing table exposes the selection reason and the intended route is installed.

D:

The proposed principle concerns another network fault: Changing router identity may require controlled protocol restart or adjacency reestablishment. Here, receiving topology data does not guarantee a route becomes active and installed. The most direct correction is to compare received LSAs with route selection, area eligibility and next-hop resolution, confirmed by the routing table exposes the selection reason and the intended route is installed.

Question 281

A route reflector advertises routes to the wrong clients after a change in group membership. A reviewer requires a remedy and concrete test evidence. Which pairing fits?

  1. Implement: Restore standard AS-path checks and review any justified exception with design authority. Verify: An unwanted looped route is rejected in a lab before production change.
  2. Control: Apply a safe approved OSPF process refresh and verify advertised router identity. Accepted result: All neighbors record the new unique ID and routing stability is restored.
  3. Action: Distinguish an advertised inbound hint from neighboring-AS route policy decisions. Evidence: A controlled route lookup confirms the neighbor's actual selected entry path.
  4. Repair: Review route-reflector client and cluster design, including loop-prevention attributes. Check: A test prefix reaches permitted clients without cycling through reflector clusters.

Explanation

Correct Answer

D:

The case turns on the distinction that route reflection relies on correct client boundaries and originator or cluster tracking. Apply this concrete engineering step: Review route-reflector client and cluster design, including loop-prevention attributes. An acceptable verification outcome is: A test prefix reaches permitted clients without cycling through reflector clusters.

Incorrect Answers

A:

This response would target a different source scenario: A provider accepts a route with its own AS in the received path after a risky bypass of loop prevention. It cannot establish the current acceptance requirement, which is: A test prefix reaches permitted clients without cycling through reflector clusters. The relevant action is: Review route-reflector client and cluster design, including loop-prevention attributes.

B:

Apply a safe approved OSPF process refresh and verify advertised router identity is a relevant step for the separate scenario in which a technician edits a router ID but tests immediately without accounting for established OSPF process state. It does not directly fix this case. Instead review route-reflector client and cluster design, including loop-prevention attributes; verify: A test prefix reaches permitted clients without cycling through reflector clusters.

C:

The alternative addresses an inbound MED is assumed to control outgoing traffic even though the receiving network has its own path-selection policies, not the present root cause. Here the selected correction must reflect route reflection relies on correct client boundaries and originator or cluster tracking. Test for: A test prefix reaches permitted clients without cycling through reflector clusters.

Question 282

A core engineer sees that IPv6 reachability is absent despite IS-IS adjacency and concludes the adjacency itself is broken. Which underlying Junos networking principle explains the failure?

  1. The governing rule is: An adjacency can be operational while a specific family or prefix is not advertised.
  2. The key distinction is: Common topology information can still produce direction-dependent shortest paths.
  3. Protocol behavior: IS-IS routing levels determine topology knowledge and area reachability.
  4. Underlying principle: OSPF neighbor-state interpretation depends on multiaccess election roles.

Explanation

Correct Answer

A:

Because an adjacency can be operational while a specific family or prefix is not advertised, the best response is to distinguish IS-IS adjacency from address-family reachability advertisements. A reviewer can close the technical case only after confirming that the expected IPv6 prefix appears after family and policy review.

Incorrect Answers

B:

The proposed principle concerns another network fault: Common topology information can still produce direction-dependent shortest paths. Here, an adjacency can be operational while a specific family or prefix is not advertised. The most direct correction is to distinguish IS-IS adjacency from address-family reachability advertisements, confirmed by the expected IPv6 prefix appears after family and policy review.

C:

That result would be useful for a different failure, namely: A router learns a local IS-IS topology but cannot infer reachability in a remote area from its Level 1-only view. The current case specifically calls for: Distinguish IS-IS adjacency from address-family reachability advertisements. The required observed result is: The expected IPv6 prefix appears after family and policy review.

D:

This response would target a different source scenario: A broadcast core VLAN has only one Full adjacency and the engineer wants to reset all routers immediately. It cannot establish the current acceptance requirement, which is: The expected IPv6 prefix appears after family and policy review. The relevant action is: Distinguish IS-IS adjacency from address-family reachability advertisements.

Question 283

An RSTP uplink continues to flap between discarding and forwarding after an unstable fiber replacement. What remediation is most directly applicable?

  1. Apply this control: Inspect interface faults and control-plane events before changing STP timers.
  2. Remediation: Separate provider service identification from customer VLAN identifiers.
  3. Recommended change: Inspect spanning-tree loop-protection events, root path and link state.
  4. Next step: Review root bridge priority and MAC-based bridge identifier comparison.

Explanation

Correct Answer

A:

The case turns on the distinction that sTP instability can be secondary to physical link churn. Apply this concrete engineering step: Inspect interface faults and control-plane events before changing STP timers. An acceptable verification outcome is: After fiber repair the port converges and remains in a stable role.

Incorrect Answers

B:

This answer would be more suitable when two network services use identical customer VLAN IDs and the team assumes their frames must share one L2 broadcast domain, where the corrective action is to separate provider service identification from customer VLAN identifiers. The failure here is different: STP instability can be secondary to physical link churn. Required validation: After fiber repair the port converges and remains in a stable role.

C:

This option overlooks the decisive condition. Its supporting principle is loop protection can prevent unsafe forwarding when control-plane information is missing, while this scenario depends on sTP instability can be secondary to physical link churn. Verify the correction with: After fiber repair the port converges and remains in a stable role.

D:

Traditional spanning-tree root election favors the lowest bridge ID describes a neighboring protocol concern. In this case the controlling fact is sTP instability can be secondary to physical link churn. A correct remediation would inspect interface faults and control-plane events before changing STP timers and demonstrate: After fiber repair the port converges and remains in a stable role.

Question 284

A new OSPF uplink remains down at the adjacency stage after a router replacement. What diagnosis and engineering response are most appropriate?

  1. Cause: OSPF network-type and Hello compatibility can prevent adjacency formation. Response: Verify compatible network and Hello parameters including mask where applicable.
  2. Diagnosis: Authentication mismatches can reject otherwise valid OSPF protocol packets. Action: Coordinate authentication parameters and test the key change under maintenance controls.
  3. Explanation: Layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. Repair: Compare area, interface mode, timers, authentication and physical status on both endpoints.
  4. Fault mechanism: Instance-aware troubleshooting prevents a successful master-table probe from masking tenant isolation issues. Remediation: Run route and connectivity checks in the explicitly intended routing instance.

Explanation

Correct Answer

C:

This is the model-intended best choice because layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. The targeted correction is to compare area, interface mode, timers, authentication and physical status on both endpoints. Validate it by observing that the corrected link reaches stable Full adjacency and exchanges the intended routes.

Incorrect Answers

A:

That result would be useful for a different failure, namely: A router sends OSPF Hello packets but remains stuck because the subnet mask differs across neighbors on a broadcast link. The current case specifically calls for: Compare area, interface mode, timers, authentication and physical status on both endpoints. The required observed result is: The corrected link reaches stable Full adjacency and exchanges the intended routes.

B:

This response would target a different source scenario: A customer edge loses its OSPF neighbor after an authentication key rollover. It cannot establish the current acceptance requirement, which is: The corrected link reaches stable Full adjacency and exchanges the intended routes. The relevant action is: Compare area, interface mode, timers, authentication and physical status on both endpoints.

D:

The alternative addresses a provider PE can ping a customer in the master instance but probes in the tenant routing instance fail, not the present root cause. Here the selected correction must reflect layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. Test for: The corrected link reaches stable Full adjacency and exchanges the intended routes.

Question 285

A router learns the same prefix from peers in distinct autonomous systems but the engineer compares only BGP hop count. Which post-change observation most strongly confirms the correction?

  1. The test confirms that an authenticated TCP session stays Established after the rule correction.
  2. Expected observation: The chosen path matches the configured preference and applicable attributes.
  3. Verification result: A neighbor advertising test shows precisely the allowed tagged prefixes.
  4. Closeout evidence: All neighbors record the new unique ID and routing stability is restored.

Explanation

Correct Answer

B:

The case turns on the distinction that bGP selection is policy-driven and is not equivalent to IGP least-hop routing. Apply this concrete engineering step: Trace the applicable BGP route-selection steps and local policies. An acceptable verification outcome is: The chosen path matches the configured preference and applicable attributes.

Incorrect Answers

A:

This option overlooks the decisive condition. Its supporting principle is bGP sessions require sustained TCP connectivity independent of physical interface health, while this scenario depends on bGP selection is policy-driven and is not equivalent to IGP least-hop routing. Verify the correction with: The chosen path matches the configured preference and applicable attributes.

C:

The proposed principle concerns another network fault: BGP group inheritance and policy direction govern which advertisements are modified. Here, bGP selection is policy-driven and is not equivalent to IGP least-hop routing. The most direct correction is to trace the applicable BGP route-selection steps and local policies, confirmed by the chosen path matches the configured preference and applicable attributes.

D:

That result would be useful for a different failure, namely: A technician edits a router ID but tests immediately without accounting for established OSPF process state. The current case specifically calls for: Trace the applicable BGP route-selection steps and local policies. The required observed result is: The chosen path matches the configured preference and applicable attributes.

Question 286

Two GRE tunnels share source and destination addresses while the design assumes ordinary routing will distinguish the services automatically. What is the primary routing or switching concept illustrated?

  1. The key distinction is: Tunnel identification and routing-instance separation must be explicit in overlapping designs.
  2. Protocol behavior: Tunnel endpoint parameters must correspond to actual reachable interfaces.
  3. Underlying principle: GRE by itself does not provide encryption or authenticated confidentiality.
  4. Root design issue: Underlying endpoint reachability does not guarantee permitted encapsulated payloads.

Explanation

Correct Answer

A:

Correct diagnosis: Tunnel identification and routing-instance separation must be explicit in overlapping designs. The appropriate action is: Review tunnel identifiers, endpoint uniqueness and supported platform demultiplexing. The follow-up evidence required is: Each service test packet reaches its assigned tunnel context.

Incorrect Answers

B:

The alternative addresses a GRE tunnel interface exists but its operational state is unreliable because the source interface was changed, not the present root cause. Here the selected correction must reflect tunnel identification and routing-instance separation must be explicit in overlapping designs. Test for: Each service test packet reaches its assigned tunnel context.

C:

This answer would be more suitable when a network operator assumes a GRE tunnel encrypts customer packets merely because they are encapsulated, where the corrective action is to distinguish tunneling encapsulation from confidentiality protection. The failure here is different: Tunnel identification and routing-instance separation must be explicit in overlapping designs. Required validation: Each service test packet reaches its assigned tunnel context.

D:

This option overlooks the decisive condition. Its supporting principle is underlying endpoint reachability does not guarantee permitted encapsulated payloads, while this scenario depends on tunnel identification and routing-instance separation must be explicit in overlapping designs. Verify the correction with: Each service test packet reaches its assigned tunnel context.

Question 287

A customer edge loses its OSPF neighbor after an authentication key rollover. What is the primary routing or switching concept illustrated?

  1. The governing rule is: Authentication mismatches can reject otherwise valid OSPF protocol packets.
  2. The key distinction is: Routing policy acceptance must reflect explicitly permitted destinations.
  3. Protocol behavior: Changing router identity may require controlled protocol restart or adjacency reestablishment.
  4. Underlying principle: OSPF DR selection depends on eligible routers and the current election event.

Explanation

Correct Answer

A:

The selected response implements the principle that authentication mismatches can reject otherwise valid OSPF protocol packets. The engineer should coordinate authentication parameters and test the key change under maintenance controls. Successful confirmation means: Authenticated adjacency returns and no fallback to unauthenticated operation occurs.

Incorrect Answers

B:

That result would be useful for a different failure, namely: A route import policy accepts more-specific destinations that should remain isolated inside a wholesale tenant. The current case specifically calls for: Coordinate authentication parameters and test the key change under maintenance controls. The required observed result is: Authenticated adjacency returns and no fallback to unauthenticated operation occurs.

C:

This response would target a different source scenario: A technician edits a router ID but tests immediately without accounting for established OSPF process state. It cannot establish the current acceptance requirement, which is: Authenticated adjacency returns and no fallback to unauthenticated operation occurs. The relevant action is: Coordinate authentication parameters and test the key change under maintenance controls.

D:

Review router priorities and the nonpreemptive properties of DR elections is a relevant step for the separate scenario in which a broadcast OSPF segment experiences repeated DR elections after interface priority changes. It does not directly fix this case. Instead coordinate authentication parameters and test the key change under maintenance controls; verify: Authenticated adjacency returns and no fallback to unauthenticated operation occurs.

Question 288

A transit operator changes IS-IS metrics on one interface and later discovers a traffic-engineering imbalance. Which underlying Junos networking principle explains the failure?

  1. Root design issue: A backup path requires functional forwarding, not merely topology presence.
  2. The governing rule is: Compatible IS-IS levels and area information determine available adjacency types.
  3. The key distinction is: IS-IS shortest-path output depends on effective metrics across the route.
  4. Protocol behavior: BGP message types have separate roles in session formation and reachability exchange.

Explanation

Correct Answer

C:

This option addresses the stated case rather than another networking issue. Principle: IS-IS shortest-path output depends on effective metrics across the route. Remedy: Measure end-to-end route choices and review configured interface metrics. Proof: Traffic and route lookup follow the documented optimized path.

Incorrect Answers

A:

This answer would be more suitable when a provider failover exposes an alternate IS-IS path that had never been tested for next-hop resolution, where the corrective action is to rehearse the failure and inspect active next hops and IS-IS route changes. The failure here is different: IS-IS shortest-path output depends on effective metrics across the route. Required validation: Traffic and route lookup follow the documented optimized path.

B:

This option overlooks the decisive condition. Its supporting principle is compatible IS-IS levels and area information determine available adjacency types, while this scenario depends on iS-IS shortest-path output depends on effective metrics across the route. Verify the correction with: Traffic and route lookup follow the documented optimized path.

D:

The proposed principle concerns another network fault: BGP message types have separate roles in session formation and reachability exchange. Here, iS-IS shortest-path output depends on effective metrics across the route. The most direct correction is to measure end-to-end route choices and review configured interface metrics, confirmed by traffic and route lookup follow the documented optimized path.

Question 289

A service provider tags prefixes for selective export but applies the community-match policy to the wrong neighbor group. What implementation step and validation result should be selected?

  1. Action: Map inbound and outbound policy points and confirm the intended communities. Evidence: A neighbor advertising test shows precisely the allowed tagged prefixes.
  2. Repair: Inspect local preference, export/import inheritance and selected BGP path attributes. Check: Traffic uses the primary provider until the documented failover condition occurs.
  3. Change: Inspect the full MPLS label stack and outgoing label operation. Test: A capture identifies the label used at each transit stage.
  4. Implement: Trace the applicable BGP route-selection steps and local policies. Verify: The chosen path matches the configured preference and applicable attributes.

Explanation

Correct Answer

A:

Underlying cause: BGP group inheritance and policy direction govern which advertisements are modified. Corrective action: map inbound and outbound policy points and confirm the intended communities. Verify the outcome: A neighbor advertising test shows precisely the allowed tagged prefixes.

Incorrect Answers

B:

Inspect local preference, export/import inheritance and selected BGP path attributes is a relevant step for the separate scenario in which a policy change unexpectedly makes a backup transit provider carry most outbound traffic. It does not directly fix this case. Instead map inbound and outbound policy points and confirm the intended communities; verify: A neighbor advertising test shows precisely the allowed tagged prefixes.

C:

The alternative addresses a router sees multiple labels on a packet but an engineer only examines the innermost label when troubleshooting transit transport, not the present root cause. Here the selected correction must reflect bGP group inheritance and policy direction govern which advertisements are modified. Test for: A neighbor advertising test shows precisely the allowed tagged prefixes.

D:

This answer would be more suitable when a router learns the same prefix from peers in distinct autonomous systems but the engineer compares only BGP hop count, where the corrective action is to trace the applicable BGP route-selection steps and local policies. The failure here is different: BGP group inheritance and policy direction govern which advertisements are modified. Required validation: A neighbor advertising test shows precisely the allowed tagged prefixes.

Question 290

A provider configures an IPv6 static route but assumes IPv4 ARP will resolve its IPv6 neighbor. Which underlying Junos networking principle explains the failure?

  1. Protocol behavior: BGP family negotiation and route policy control IPv6 NLRI exchange.
  2. Underlying principle: IPv6 link-layer neighbor resolution uses ICMPv6 Neighbor Discovery.
  3. Root design issue: Underlying endpoint reachability does not guarantee permitted encapsulated payloads.
  4. The governing rule is: IS-IS shortest-path output depends on effective metrics across the route.

Explanation

Correct Answer

B:

This is the model-intended best choice because iPv6 link-layer neighbor resolution uses ICMPv6 Neighbor Discovery. The targeted correction is to distinguish IPv6 Neighbor Discovery from IPv4 ARP. Validate it by observing that the neighbor cache resolves the IPv6 next hop and traffic passes.

Incorrect Answers

A:

BGP family negotiation and route policy control IPv6 NLRI exchange describes a neighboring protocol concern. In this case the controlling fact is iPv6 link-layer neighbor resolution uses ICMPv6 Neighbor Discovery. A correct remediation would distinguish IPv6 Neighbor Discovery from IPv4 ARP and demonstrate: The neighbor cache resolves the IPv6 next hop and traffic passes.

C:

That result would be useful for a different failure, namely: IPv6-over-IPv4 tunnel endpoints reach each other using IPv4 but IPv6 payloads fail after a firewall update. The current case specifically calls for: Distinguish IPv6 Neighbor Discovery from IPv4 ARP. The required observed result is: The neighbor cache resolves the IPv6 next hop and traffic passes.

D:

This response would target a different source scenario: A transit operator changes IS-IS metrics on one interface and later discovers a traffic-engineering imbalance. It cannot establish the current acceptance requirement, which is: The neighbor cache resolves the IPv6 next hop and traffic passes. The relevant action is: Distinguish IPv6 Neighbor Discovery from IPv4 ARP.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests