Question 260
An OSPF interface is accidentally set passive on a provider edge and its neighbor never appears. Which test result would best confirm a successful fix?
Explanation
Correct Answer
Correct diagnosis: Passive OSPF interfaces can advertise networks without forming neighbors on that interface. The appropriate action is: Review the passive-interface configuration and required active neighbor links. The follow-up evidence required is: The intended backbone neighbor forms and customer-only passive interfaces remain passive.
Incorrect Answers
That result would be useful for a different failure, namely: Two Junos routers on the same link have mismatched OSPF area identifiers and never form a neighbor relationship. The current case specifically calls for: Review the passive-interface configuration and required active neighbor links. The required observed result is: The intended backbone neighbor forms and customer-only passive interfaces remain passive.
This response would target a different source scenario: An OSPF packet capture shows Link State Updates but the route remains hidden from the active table. It cannot establish the current acceptance requirement, which is: The intended backbone neighbor forms and customer-only passive interfaces remain passive. The relevant action is: Review the passive-interface configuration and required active neighbor links.
Inspect IS-IS interface enablement, levels, area identifiers and link type is a relevant step for the separate scenario in which a Junos router shows no IS-IS adjacency after a circuit migration though the interface is physically up. It does not directly fix this case. Instead review the passive-interface configuration and required active neighbor links; verify: The intended backbone neighbor forms and customer-only passive interfaces remain passive.