mcAfee Secure Website
exam =5
exam =6

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Reliable & Actual Study Materials for NSE4_FGT_AD-7.6 Exam Success

94 Questions & Answers with Testing Engine

"NSE4_FGT_AD-7.6: Fortinet NSE 4 - FortiOS 7.6 Administrator" Testing Engine covers all the knowledge points of the real Fortinet NSE4_FGT_AD-7.6 exam.

The latest actual NSE4_FGT_AD-7.6 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NSE4_FGT_AD-7.6 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Fortinet Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 52

Question 510

An organization runs both MPLS and direct internet SD-WAN members. The current operating problem is that a branch FortiGate has SD-WAN zone policies but no route toward either zone. What is the most appropriate next step?

  1. Separate MPLS and internet members into appropriate zones and policies
  2. Restrict the private-application SD-WAN rule to approved MPLS members
  3. Configure the necessary static route into the SD-WAN interface context
  4. Put specific private destinations ahead of the generic internet breakout rule

Explanation

Correct Answer

C:

The appropriate control is to configure the necessary static route into the SD-WAN interface context. SD-WAN policy needs a routing path that selects the virtual steering interface.

Incorrect Answers

A:

Separate MPLS and internet members into appropriate zones and policies is useful when the general internet policy applies the MPLS inspection profile to broadband. Distinct zones support different inspection and NAT requirements.

B:

Restrict the private-application SD-WAN rule to approved MPLS members addresses a different symptom: MPLS private traffic is steered onto broadband despite compliance restrictions. App steering must enforce allowed transport classes before choosing link quality.

D:

Put specific private destinations ahead of the generic internet breakout rule is useful when a branch sends all default traffic into MPLS after an SD-WAN rule reorder. Ordered SD-WAN matches separate private business destinations from public internet.

Question 511

A business plans a low-risk FortiOS SD-WAN policy migration. During troubleshooting, the engineer finds that existing application sessions keep using legacy WAN decisions during testing. Which response is most effective for this case?

  1. Capture pre/post link metrics and traffic outcomes for representative business paths
  2. Exclude nonreachable members from that rule's allowed egress set
  3. Check interface preference and strategy tie-breaking for equal-cost eligible links
  4. Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules

Explanation

Correct Answer

D:

Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules directly addresses the requirement. Existing sessions may retain the original member selection.

Incorrect Answers

A:

Capture pre/post link metrics and traffic outcomes for representative business paths is useful when the change plan lacks measurements of utilization and link quality before rollout. A controlled baseline is necessary to judge whether steering improved operations.

B:

Exclude nonreachable members from that rule's allowed egress set addresses a different symptom: a member is accidentally included in a rule requiring a destination it cannot reach. Quality scoring cannot repair an impossible underlying topology.

C:

Check interface preference and strategy tie-breaking for equal-cost eligible links is relevant when two SD-WAN members share the same cost and the team expects random link selection. Lowest Cost (SLA) can use preference order when eligible members have equal cost.

Question 512

A business plans a low-risk FortiOS SD-WAN policy migration. The observed symptom is that a planned link failure is tested only against ICMP instead of the business app. Which response best fits the observed symptoms?

  1. Check interface preference and strategy tie-breaking for equal-cost eligible links
  2. Exclude nonreachable members from that rule's allowed egress set
  3. Validate the actual application protocol, SLA and return NAT across failover
  4. Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules

Explanation

Correct Answer

C:

Validate the actual application protocol, SLA and return NAT across failover is the best response. ICMP success does not establish reliable production application behavior.

Incorrect Answers

A:

Check interface preference and strategy tie-breaking for equal-cost eligible links addresses a different symptom: two SD-WAN members share the same cost and the team expects random link selection. Lowest Cost (SLA) can use preference order when eligible members have equal cost.

B:

Exclude nonreachable members from that rule's allowed egress set is relevant when a member is accidentally included in a rule requiring a destination it cannot reach. Quality scoring cannot repair an impossible underlying topology.

D:

Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules addresses a different symptom: existing application sessions keep using legacy WAN decisions during testing. Existing sessions may retain the original member selection.

Question 513

A business plans a low-risk FortiOS SD-WAN policy migration. A post-change test indicates that two SD-WAN members share the same cost and the team expects random link selection. Which diagnostic step best resolves the uncertainty?

  1. Check interface preference and strategy tie-breaking for equal-cost eligible links
  2. Exclude nonreachable members from that rule's allowed egress set
  3. Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules
  4. Validate the actual application protocol, SLA and return NAT across failover

Explanation

Correct Answer

A:

Choose check interface preference and strategy tie-breaking for equal-cost eligible links. Lowest Cost (SLA) can use preference order when eligible members have equal cost.

Incorrect Answers

B:

Exclude nonreachable members from that rule's allowed egress set is useful when a member is accidentally included in a rule requiring a destination it cannot reach. Quality scoring cannot repair an impossible underlying topology.

C:

Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules addresses a different symptom: existing application sessions keep using legacy WAN decisions during testing. Existing sessions may retain the original member selection.

D:

Validate the actual application protocol, SLA and return NAT across failover is relevant when a planned link failure is tested only against ICMP instead of the business app. ICMP success does not establish reliable production application behavior.

Question 514

A business plans a low-risk FortiOS SD-WAN policy migration. The team reports that a member is accidentally included in a rule requiring a destination it cannot reach. What is the most appropriate next step?

  1. Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules
  2. Capture pre/post link metrics and traffic outcomes for representative business paths
  3. Exclude nonreachable members from that rule's allowed egress set
  4. Validate the actual application protocol, SLA and return NAT across failover

Explanation

Correct Answer

C:

The appropriate control is to exclude nonreachable members from that rule's allowed egress set. Quality scoring cannot repair an impossible underlying topology.

Incorrect Answers

A:

Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules is useful when existing application sessions keep using legacy WAN decisions during testing. Existing sessions may retain the original member selection.

B:

Capture pre/post link metrics and traffic outcomes for representative business paths addresses a different symptom: the change plan lacks measurements of utilization and link quality before rollout. A controlled baseline is necessary to judge whether steering improved operations.

D:

Validate the actual application protocol, SLA and return NAT across failover is useful when a planned link failure is tested only against ICMP instead of the business app. ICMP success does not establish reliable production application behavior.

Question 515

A business plans a low-risk FortiOS SD-WAN policy migration. In the effective configuration, the change plan lacks measurements of utilization and link quality before rollout. What should the engineer investigate or verify?

  1. Capture pre/post link metrics and traffic outcomes for representative business paths
  2. Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules
  3. Check interface preference and strategy tie-breaking for equal-cost eligible links
  4. Exclude nonreachable members from that rule's allowed egress set

Explanation

Correct Answer

A:

Capture pre/post link metrics and traffic outcomes for representative business paths directly addresses the requirement. A controlled baseline is necessary to judge whether steering improved operations.

Incorrect Answers

B:

Initiate new test sessions or clear scoped old sessions after changing SD-WAN rules is relevant when existing application sessions keep using legacy WAN decisions during testing. Existing sessions may retain the original member selection.

C:

Check interface preference and strategy tie-breaking for equal-cost eligible links is useful when two SD-WAN members share the same cost and the team expects random link selection. Lowest Cost (SLA) can use preference order when eligible members have equal cost.

D:

Exclude nonreachable members from that rule's allowed egress set addresses a different symptom: a member is accidentally included in a rule requiring a destination it cannot reach. Quality scoring cannot repair an impossible underlying topology.

Question 516

Two offices create a new route-based IPsec site-to-site tunnel. The administrator observes that IKE negotiation fails because both peers specify disjoint encryption proposals. What should the administrator do to address the stated condition?

  1. Select the correct Phase 1 local WAN interface and peer source addressing
  2. Align compatible IKE Phase 1 cryptographic proposals on both peers
  3. Configure matching IKE authentication secrets for the expected peer identities
  4. Set a mutually supported IKE version on both ends

Explanation

Correct Answer

B:

Align compatible IKE Phase 1 cryptographic proposals on both peers is the best response. Phase 1 cannot establish an IKE SA without a common accepted cryptographic proposal.

Incorrect Answers

A:

Select the correct Phase 1 local WAN interface and peer source addressing addresses a different symptom: IKE reaches the remote gateway but the response fails source-interface validation. The tunnel must negotiate using the interface and source address expected by the remote peer.

C:

Configure matching IKE authentication secrets for the expected peer identities is useful when the two devices agree on algorithms but have different pre-shared keys. Pre-shared key authentication requires the intended shared secret on both ends.

D:

Set a mutually supported IKE version on both ends addresses a different symptom: one peer expects IKEv2 but the remote end is explicitly configured for an incompatible IKE version. Both devices must negotiate the same IKE protocol family to establish security associations.

Question 517

Two offices create a new route-based IPsec site-to-site tunnel. During troubleshooting, the engineer finds that the two devices agree on algorithms but have different pre-shared keys. Which action best meets the stated requirement?

  1. Align compatible IKE Phase 1 cryptographic proposals on both peers
  2. Configure matching IKE authentication secrets for the expected peer identities
  3. Select the correct Phase 1 local WAN interface and peer source addressing
  4. Set a mutually supported IKE version on both ends

Explanation

Correct Answer

B:

Choose configure matching IKE authentication secrets for the expected peer identities. Pre-shared key authentication requires the intended shared secret on both ends. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Align compatible IKE Phase 1 cryptographic proposals on both peers is relevant when IKE negotiation fails because both peers specify disjoint encryption proposals. Phase 1 cannot establish an IKE SA without a common accepted cryptographic proposal.

C:

Select the correct Phase 1 local WAN interface and peer source addressing addresses a different symptom: IKE reaches the remote gateway but the response fails source-interface validation. The tunnel must negotiate using the interface and source address expected by the remote peer.

D:

Set a mutually supported IKE version on both ends is relevant when one peer expects IKEv2 but the remote end is explicitly configured for an incompatible IKE version. Both devices must negotiate the same IKE protocol family to establish security associations.

Question 518

Two offices create a new route-based IPsec site-to-site tunnel. The observed symptom is that one peer expects IKEv2 but the remote end is explicitly configured for an incompatible IKE version. What is the most appropriate next step?

  1. Correct the Phase 1 remote-gateway destination to the actual peer endpoint
  2. Set a mutually supported IKE version on both ends
  3. Align compatible IKE Phase 1 cryptographic proposals on both peers
  4. Configure matching IKE authentication secrets for the expected peer identities

Explanation

Correct Answer

B:

The appropriate control is to set a mutually supported IKE version on both ends. Both devices must negotiate the same IKE protocol family to establish security associations.

Incorrect Answers

A:

Correct the Phase 1 remote-gateway destination to the actual peer endpoint is useful when the remote peer gateway address is wrong although both firewalls are reachable generally. IKE is initiated to the configured remote gateway rather than any reachable firewall.

C:

Align compatible IKE Phase 1 cryptographic proposals on both peers is relevant when IKE negotiation fails because both peers specify disjoint encryption proposals. Phase 1 cannot establish an IKE SA without a common accepted cryptographic proposal.

D:

Configure matching IKE authentication secrets for the expected peer identities is useful when the two devices agree on algorithms but have different pre-shared keys. Pre-shared key authentication requires the intended shared secret on both ends.

Question 519

Two offices create a new route-based IPsec site-to-site tunnel. A post-change test indicates that the remote peer gateway address is wrong although both firewalls are reachable generally. Which control most directly addresses the observed gap?

  1. Correct the Phase 1 remote-gateway destination to the actual peer endpoint
  2. Configure matching IKE authentication secrets for the expected peer identities
  3. Select the correct Phase 1 local WAN interface and peer source addressing
  4. Align compatible IKE Phase 1 cryptographic proposals on both peers

Explanation

Correct Answer

A:

Correct the Phase 1 remote-gateway destination to the actual peer endpoint directly addresses the requirement. IKE is initiated to the configured remote gateway rather than any reachable firewall.

Incorrect Answers

B:

Configure matching IKE authentication secrets for the expected peer identities is relevant when the two devices agree on algorithms but have different pre-shared keys. Pre-shared key authentication requires the intended shared secret on both ends.

C:

Select the correct Phase 1 local WAN interface and peer source addressing is useful when IKE reaches the remote gateway but the response fails source-interface validation. The tunnel must negotiate using the interface and source address expected by the remote peer.

D:

Align compatible IKE Phase 1 cryptographic proposals on both peers addresses a different symptom: IKE negotiation fails because both peers specify disjoint encryption proposals. Phase 1 cannot establish an IKE SA without a common accepted cryptographic proposal.

Question 520

Two offices create a new route-based IPsec site-to-site tunnel. The team reports that IKE reaches the remote gateway but the response fails source-interface validation. Which response is most effective for this case?

  1. Select the correct Phase 1 local WAN interface and peer source addressing
  2. Set a mutually supported IKE version on both ends
  3. Configure matching IKE authentication secrets for the expected peer identities
  4. Correct the Phase 1 remote-gateway destination to the actual peer endpoint

Explanation

Correct Answer

A:

Select the correct Phase 1 local WAN interface and peer source addressing is the best response. The tunnel must negotiate using the interface and source address expected by the remote peer.

Incorrect Answers

B:

Set a mutually supported IKE version on both ends is useful when one peer expects IKEv2 but the remote end is explicitly configured for an incompatible IKE version. Both devices must negotiate the same IKE protocol family to establish security associations.

C:

Configure matching IKE authentication secrets for the expected peer identities addresses a different symptom: the two devices agree on algorithms but have different pre-shared keys. Pre-shared key authentication requires the intended shared secret on both ends.

D:

Correct the Phase 1 remote-gateway destination to the actual peer endpoint is relevant when the remote peer gateway address is wrong although both firewalls are reachable generally. IKE is initiated to the configured remote gateway rather than any reachable firewall.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests