mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 9

Question 80

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a leaf port must carry separate tagged tenant attachment networks. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Put all tenants into one untagged subinterface without segmentation.
  2. Configure a VXLAN VNI as a physical Ethernet speed.
  3. Use a BGP local preference as a VLAN identifier.
  4. Define matching VLAN-tagged subinterfaces with the correct encapsulation.

Explanation

Correct Answer

D:

Subinterfaces permit explicit per-tag service attachment on an interface. For Delta-6, confirm the actual outcome: the expected tags and subinterfaces appear in the attachment configuration and traffic counters.

Incorrect Answers

A:

“Put all tenants into one untagged subinterface without segmentation” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation.

B:

“Configure a VXLAN VNI as a physical Ethernet speed” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation.

C:

“Use a BGP local preference as a VLAN identifier” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation.

Question 81

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a support user needs limited read-only access to device state. The planned change is "Assign an appropriate SR Linux user role with scoped privileges." Which post-change observation best validates the intended technical behavior?

  1. Verify that the user can inspect permitted state but cannot perform prohibited changes.
  2. Check only that the device hostname is listed in the inventory, without examining operator authorization behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required operator authorization condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

A:

Role-based authorization limits what authenticated users can view or modify. The option uses “Verify that the user can inspect permitted state but cannot perform prohibited changes” to address “a support user needs limited read-only access to device state”. The acceptance test is: the user can inspect permitted state but cannot perform prohibited changes.

Incorrect Answers

B:

“Check only that the device hostname is listed in the inventory, without examining operator authorization behavior” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. The confirming result is: the user can inspect permitted state but cannot perform prohibited changes.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required operator authorization condition” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. The confirming result is: the user can inspect permitted state but cannot perform prohibited changes.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. The confirming result is: the user can inspect permitted state but cannot perform prohibited changes.

Question 82

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. A peer suggested: "Require all hosts to connect to the same physical access switch" That did not solve the constraint. What should be chosen instead?

  1. Require all hosts to connect to the same physical access switch.
  2. Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.
  3. Use only an underlay default route without an L2 overlay service.
  4. Put tenant endpoints solely in a remote unconnected IP-VRF.

Explanation

Correct Answer

B:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. For North-10, confirm the actual outcome: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Incorrect Answers

A:

“Require all hosts to connect to the same physical access switch” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Before onboarding, test that the intended fabric state exists.

C:

“Use only an underlay default route without an L2 overlay service” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Before onboarding, test that the intended fabric state exists.

D:

“Put tenant endpoints solely in a remote unconnected IP-VRF” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Before onboarding, test that the intended fabric state exists.

Question 83

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that a short incident window requires evidence of selected packets without broad logging. A peer suggested: "Use a route target as a packet capture selector" That did not solve the constraint. What should be chosen instead?

  1. Export only configuration checkpoints and infer packet contents.
  2. Change an interface alias to make missing packets visible.
  3. Use a scoped SR Linux capture filter and inspect the captured traffic.
  4. Use a route target as a packet capture selector.

Explanation

Correct Answer

C:

Capture filters select packet observations for troubleshooting rather than changing policy by themselves. For Canyon-5, confirm the actual outcome: the capture contains relevant matching frames from the requested interface or path.

Incorrect Answers

A:

“Export only configuration checkpoints and infer packet contents” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic. Before onboarding, test that the intended fabric state exists.

B:

“Change an interface alias to make missing packets visible” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic. Before onboarding, test that the intended fabric state exists.

D:

“Use a route target as a packet capture selector” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic. Before onboarding, test that the intended fabric state exists.

Question 84

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that a link carries packets but the application sees intermittent errors. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Check only the switch hostname to judge packet loss.
  2. Change the route distinguisher to reset physical CRC errors.
  3. Assume a green GUI icon proves no packet impairment.
  4. Inspect error, discard and packet counters for that interface.

Explanation

Correct Answer

D:

Counters help distinguish physical or forwarding problems from configuration guesses. For Atlas-7, confirm the actual outcome: error and discard trends align with measured traffic and reported symptoms.

Incorrect Answers

A:

“Check only the switch hostname to judge packet loss” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Change the route distinguisher to reset physical CRC errors” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Assume a green GUI icon proves no packet impairment” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 85

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a route is present but only one of several equal-cost paths is actually eligible. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Inspect installed route and next-hop eligibility before changing link policy.
  2. Assume BGP established state guarantees that every path is in ECMP.
  3. Change a VLAN name to rebalance layer 3 forwarding.
  4. Modify a tenant ACL without checking next-hop selection.

Explanation

Correct Answer

A:

Only installed eligible equal-cost next hops can participate in forwarding. For Canyon-5, confirm the actual outcome: the route has the expected eligible next-hop set in forwarding state.

Incorrect Answers

B:

“Assume BGP established state guarantees that every path is in ECMP” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Before onboarding, test that the intended fabric state exists.

C:

“Change a VLAN name to rebalance layer 3 forwarding” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Before onboarding, test that the intended fabric state exists.

D:

“Modify a tenant ACL without checking next-hop selection” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Before onboarding, test that the intended fabric state exists.

Question 86

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that traffic must route between tenant subnets while maintaining VRF isolation across VTEPs. Which engineering action best satisfies this request?

  1. Use a CLI alias as the inter-subnet forwarding method.
  2. Use a correctly designed symmetric IRB L3 EVPN routing model.
  3. Remove the IP-VRF and route all tenants in a single default instance.
  4. Require destination-VLAN bridge membership at every intermediary hop.

Explanation

Correct Answer

B:

Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The option uses “Use a correctly designed symmetric IRB L3 EVPN routing model” to address “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. The result must be observed on the affected component.

Incorrect Answers

A:

“Use a CLI alias as the inter-subnet forwarding method” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

C:

“Remove the IP-VRF and route all tenants in a single default instance” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

D:

“Require destination-VLAN bridge membership at every intermediary hop” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

Question 87

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that several static routes must share a maintained forwarding next-hop selection. Which engineering action best satisfies this request?

  1. Use the EDA service intent name as an IP gateway.
  2. Repeat arbitrary interface aliases as route next hops.
  3. Define and reference an appropriate next-hop group.
  4. Put all static routes into the MAC address learning table.

Explanation

Correct Answer

C:

A next-hop group separates forwarding next-hop membership from destination-prefix entries. The option uses “Define and reference an appropriate next-hop group” to address “several static routes must share a maintained forwarding next-hop selection”. The result must be observed on the affected component.

Incorrect Answers

A:

“Use the EDA service intent name as an IP gateway” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group.

B:

“Repeat arbitrary interface aliases as route next hops” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group.

D:

“Put all static routes into the MAC address learning table” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group.

Question 88

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Recreate the tenant VLAN without checking IP reachability.
  2. Disable BGP EVPN to hide underlay route loss.
  3. Change the application hostname while leaving the network unchanged.
  4. Restore IP routing reachability to the remote VTEP address in the underlay.

Explanation

Correct Answer

D:

An overlay packet still needs an IP path to its outer tunnel destination. For Delta-6, confirm the actual outcome: the remote VTEP loopback is reachable through the intended underlay route.

Incorrect Answers

A:

“Recreate the tenant VLAN without checking IP reachability” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

B:

“Disable BGP EVPN to hide underlay route loss” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

C:

“Change the application hostname while leaving the network unchanged” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

Question 89

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that a support team wants reusable context values across diagnostic commands. A peer suggested: "Edit an ACL policer as a substitute for CLI variables" That did not solve the constraint. What should be chosen instead?

  1. Use supported CLI environment variables for repeatable command contexts.
  2. Advertise CLI strings as EVPN prefixes.
  3. Write a static route for every terminal shortcut.
  4. Edit an ACL policer as a substitute for CLI variables.

Explanation

Correct Answer

A:

Environment variables organize command-line context rather than protocol forwarding. For Ridge-2, confirm the actual outcome: the intended CLI context resolves consistently during diagnostics.

Incorrect Answers

B:

“Advertise CLI strings as EVPN prefixes” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts.

C:

“Write a static route for every terminal shortcut” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts.

D:

“Edit an ACL policer as a substitute for CLI variables” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts.

Question 90

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that equal-cost uplinks should carry traffic while preserving resilient paths. Which engineering action best satisfies this request?

  1. Statically pin every flow to one uplink despite available equal-cost paths.
  2. Use ECMP across eligible equal-cost routed next hops.
  3. Turn off redundant links to avoid routed multipath.
  4. Replace equal-cost routing with indiscriminate MAC flooding.

Explanation

Correct Answer

B:

ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. The option uses “Use ECMP across eligible equal-cost routed next hops” to address “equal-cost uplinks should carry traffic while preserving resilient paths”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Statically pin every flow to one uplink despite available equal-cost paths” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. Use the appropriate method: Use ECMP across eligible equal-cost routed next hops. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Turn off redundant links to avoid routed multipath” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. Use the appropriate method: Use ECMP across eligible equal-cost routed next hops. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Replace equal-cost routing with indiscriminate MAC flooding” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. Use the appropriate method: Use ECMP across eligible equal-cost routed next hops. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests