Question 540
In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a newly installed switchport is administratively disabled. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?
Explanation
Correct Answer
Administrative configuration and physical state must both be correct for the port to work. For North-10, confirm the actual outcome: administrative enablement is applied and operational state becomes consistent with cabling.
Incorrect Answers
“Advertise an EVPN route before enabling the physical port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Before onboarding, test that the intended fabric state exists.
“Change the tenant MAC-VRF without touching the down port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Before onboarding, test that the intended fabric state exists.
“Create a BGP route target to power the transceiver” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Before onboarding, test that the intended fabric state exists.