mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 2

Question 10

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that traffic uses a tenant VRF but only the default route table was examined. Which engineering action best satisfies this request?

  1. Assume default-instance routes always show tenant decisions.
  2. Inspect the forwarding and routing tables inside the actual tenant IP-VRF.
  3. Check an unrelated MAC-VRF as the IPv4 lookup table.
  4. Change the transport MTU without inspecting the tenant route.

Explanation

Correct Answer

B:

VRF-specific forwarding decisions require examining the correct routing instance. For Harbor-1, confirm the actual outcome: the destination is resolved in the intended tenant IP-VRF.

Incorrect Answers

A:

“Assume default-instance routes always show tenant decisions” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF.

C:

“Check an unrelated MAC-VRF as the IPv4 lookup table” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF.

D:

“Change the transport MTU without inspecting the tenant route” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF.

Question 11

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a large route display contains noise and a specific match must be isolated. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Remove the routing protocol configuration to reduce output.
  2. Block the route through an ACL to make it disappear.
  3. Apply supported CLI filtering to narrow the displayed results.
  4. Edit a syslog file and assume the route table is filtered.

Explanation

Correct Answer

C:

Output filtering changes the view without changing routing behavior. For North-10, confirm the actual outcome: the filtered display includes the target entries while forwarding stays unchanged.

Incorrect Answers

A:

“Remove the routing protocol configuration to reduce output” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Before onboarding, test that the intended fabric state exists.

B:

“Block the route through an ACL to make it disappear” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Before onboarding, test that the intended fabric state exists.

D:

“Edit a syslog file and assume the route table is filtered” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Before onboarding, test that the intended fabric state exists.

Question 12

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a control protocol is intermittently dropped after aggressive protection settings. The planned change is "Review CPM classification and policer rates against required control traffic." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining cpm policer tuning behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required cpm policer tuning condition.
  4. Verify that policer statistics and protocol session health match expected traffic rates.

Explanation

Correct Answer

D:

Correctly scoped policing balances CPU protection with valid protocol liveliness. The option uses “Verify that policer statistics and protocol session health match expected traffic rates” to address “a control protocol is intermittently dropped after aggressive protection settings”. The acceptance test is: policer statistics and protocol session health match expected traffic rates.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. The confirming result is: policer statistics and protocol session health match expected traffic rates.

B:

“Check only that the device hostname is listed in the inventory, without examining cpm policer tuning behavior” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. The confirming result is: policer statistics and protocol session health match expected traffic rates.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required cpm policer tuning condition” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. The confirming result is: policer statistics and protocol session health match expected traffic rates.

Question 13

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. The planned change is "Use VXLAN encapsulation between reachable VTEPs." Which post-change observation best validates the intended technical behavior?

  1. Verify that packet traces show VXLAN encapsulation between the expected VTEPs.
  2. Check only that the device hostname is listed in the inventory, without examining vxlan data transport behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required vxlan data transport condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

A:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The option uses “Verify that packet traces show VXLAN encapsulation between the expected VTEPs” to address “two tenant Layer 2 segments need extension across a routed IP fabric”. The acceptance test is: packet traces show VXLAN encapsulation between the expected VTEPs. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

B:

“Check only that the device hostname is listed in the inventory, without examining vxlan data transport behavior” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required vxlan data transport condition” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 14

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a VLAN-backed tenant segment is being extended using VXLAN. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use the BGP AS number as an automatic VLAN-to-VNI mapping.
  2. Map the intended local tenant bridging context to the correct VNI.
  3. Replace VNI configuration with a static IPv4 default route.
  4. Apply a system ACL to name a tenant broadcast segment.

Explanation

Correct Answer

B:

A VNI identifies the logical VXLAN segment carried over the IP fabric. For Delta-6, confirm the actual outcome: both VTEPs use the intended VNI for the tenant segment.

Incorrect Answers

A:

“Use the BGP AS number as an automatic VLAN-to-VNI mapping” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI.

C:

“Replace VNI configuration with a static IPv4 default route” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI.

D:

“Apply a system ACL to name a tenant broadcast segment” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI.

Question 15

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that management access to the switch itself must be restricted. The planned change is "Use the applicable system ACL or management-access policy for device-bound traffic." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Use an unrelated tenant dashboard as proof, without verifying the required system acl scope condition.
  3. Verify that management probes obey the intended permitted source and port policy.
  4. Check only that the device hostname is listed in the inventory, without examining system acl scope behavior.

Explanation

Correct Answer

C:

System-level access filtering concerns traffic destined to the device, not just transit services. The option uses “Verify that management probes obey the intended permitted source and port policy” to address “management access to the switch itself must be restricted”. The acceptance test is: management probes obey the intended permitted source and port policy. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. The confirming result is: management probes obey the intended permitted source and port policy. Confirm that the replacement leaf reaches the expected operational state.

B:

“Use an unrelated tenant dashboard as proof, without verifying the required system acl scope condition” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. The confirming result is: management probes obey the intended permitted source and port policy. Confirm that the replacement leaf reaches the expected operational state.

D:

“Check only that the device hostname is listed in the inventory, without examining system acl scope behavior” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. The confirming result is: management probes obey the intended permitted source and port policy. Confirm that the replacement leaf reaches the expected operational state.

Question 16

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. Which engineering action best satisfies this request?

  1. Use a log severity filter as the reachability repair.
  2. Rename the loopback without updating any IP routes.
  3. Advertise only a tenant MAC and ignore underlay reachability.
  4. Ensure the loopback endpoint address is advertised and routed in the underlay.

Explanation

Correct Answer

D:

Loopback-based tunnel endpoints require routed transport reachability. The option uses “Ensure the loopback endpoint address is advertised and routed in the underlay” to address “a VXLAN endpoint sourced from a loopback address is unreachable”. The acceptance test is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Use a log severity filter as the reachability repair” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

B:

“Rename the loopback without updating any IP routes” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

C:

“Advertise only a tenant MAC and ignore underlay reachability” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

Question 17

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that two different EVPN sources can advertise otherwise identical service prefixes. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Assign appropriate route distinguishers so VPN routes have distinct identities.
  2. Remove all identifiers to force unique route origin tracking.
  3. Use a route target as the only globally unique origin identifier.
  4. Use an interface ACL sequence number as a VPN route key.

Explanation

Correct Answer

A:

A route distinguisher contributes VPN route uniqueness and is separate from import policy. For North-10, confirm the actual outcome: distinct route sources maintain distinguishable VPN route keys.

Incorrect Answers

B:

“Remove all identifiers to force unique route origin tracking” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

C:

“Use a route target as the only globally unique origin identifier” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

D:

“Use an interface ACL sequence number as a VPN route key” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

Question 18

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that IPv6 traffic fails while IPv4 routes to the same leaf are healthy. A peer suggested: "Change an IPv4-only ACL and declare IPv6 restored" That did not solve the constraint. What should be chosen instead?

  1. Change an IPv4-only ACL and declare IPv6 restored.
  2. Inspect the IPv6 address-family routes and next-hop resolution separately.
  3. Move the entire tenant into a Layer 2 hub.
  4. Assume healthy IPv4 forwarding proves IPv6 route installation.

Explanation

Correct Answer

B:

The two IP address families have distinct routes and reachability requirements. For Ridge-2, confirm the actual outcome: the IPv6 destination and next hop are installed in the intended route table.

Incorrect Answers

A:

“Change an IPv4-only ACL and declare IPv6 restored” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately.

C:

“Move the entire tenant into a Layer 2 hub” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately.

D:

“Assume healthy IPv4 forwarding proves IPv6 route installation” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately.

Question 19

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a team wants to add a supported custom operational command to SR Linux. The planned change is "Use the SR Linux CLI plugin extension mechanism." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining cli extensibility behavior.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Verify that the plugin command is present and returns the intended modeled information.
  4. Use an unrelated tenant dashboard as proof, without verifying the required cli extensibility condition.

Explanation

Correct Answer

C:

CLI plugins are the supported extension concept for additional CLI behavior. The option uses “Verify that the plugin command is present and returns the intended modeled information” to address “a team wants to add a supported custom operational command to SR Linux”. The acceptance test is: the plugin command is present and returns the intended modeled information.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining cli extensibility behavior” targets a different operation from the reported requirement: “a team wants to add a supported custom operational command to SR Linux”. CLI plugins are the supported extension concept for additional CLI behavior. The confirming result is: the plugin command is present and returns the intended modeled information.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a team wants to add a supported custom operational command to SR Linux”. CLI plugins are the supported extension concept for additional CLI behavior. The confirming result is: the plugin command is present and returns the intended modeled information.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required cli extensibility condition” targets a different operation from the reported requirement: “a team wants to add a supported custom operational command to SR Linux”. CLI plugins are the supported extension concept for additional CLI behavior. The confirming result is: the plugin command is present and returns the intended modeled information.

Question 20

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that the fabric must limit large shared Layer 2 failure domains. A peer suggested: "Build the fabric from a single shared collision domain" That did not solve the constraint. What should be chosen instead?

  1. Rely on an overlay tunnel without any IP routing underneath.
  2. Stretch one unbroken VLAN over every underlay link.
  3. Build the fabric from a single shared collision domain.
  4. Use Layer 3 routed links between leaf and spine switches.

Explanation

Correct Answer

D:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. For Delta-6, confirm the actual outcome: routed underlay next hops reach all required VTEPs.

Incorrect Answers

A:

“Rely on an overlay tunnel without any IP routing underneath” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

B:

“Stretch one unbroken VLAN over every underlay link” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

C:

“Build the fabric from a single shared collision domain” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests