mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 61

Question 600

The consultant reviews potential shortcuts after learning that a factory must record a breakdown against the functional location even before the exact failed machine is identified. Which belief must be challenged to avoid a misleading or uncontrolled result?

  1. Writing off the pump immediately as consumed when it is only temporarily loaned.
  2. Overwriting the completed inspection to disguise an unresolved fault.
  3. Dropping the maintenance event because the serial number is not yet known.
  4. Posting maintenance consumption before a request has become an approved work order.

Explanation

Correct Answer

C:

The unsafe assumption is: Dropping the maintenance event because the serial number is not yet known. In the scenario, A factory must record a breakdown against the functional location even before the exact failed machine is identified. The appropriate controlled response is Log the request against the applicable functional location and refine the asset after investigation. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Writing off the pump immediately as consumed when it is only temporarily loaned. The check concerns writing off the pump immediately as consumed when it is only temporarily loaned, not confirming that dropping the maintenance event because the serial number is not yet known.

B:

Overwriting the completed inspection to disguise an unresolved fault. This assesses overwriting the completed inspection to disguise an unresolved fault; it does not determine the reported condition—the consultant reviews potential shortcuts after learning that a factory must record a breakdown against the functional location even before the exact.

D:

Posting maintenance consumption before a request has become an approved work order. The case-specific requirement is confirming that dropping the maintenance event because the serial number is not yet known, which that option does not establish.

Question 601

The business raises this issue: A reseller requires different default sales prices across currency-specific customer groups. The investigation has established the following evidence: Inspect the sales trade agreement's customer grouping, currency, and date criteria. Which configuration or transaction step best addresses the requirement?

  1. Complete approved standard-cost setup and controlled cutover before posting new transactions.
  2. Configure the appropriate customer price group and matching sales trade agreement.
  3. Maintain suitable price groups and currency-specific trade agreements.
  4. Maintain the approved site-specific cost record and validate its activation context.

Explanation

Correct Answer

C:

The supported next step is: Maintain suitable price groups and currency-specific trade agreements. The observed requirement is A reseller requires different default sales prices across currency-specific customer groups. The diagnostic check was: Inspect the sales trade agreement's customer grouping, currency, and date criteria. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Complete approved standard-cost setup and controlled cutover before posting new transactions. That alternative is checked by reviewing inventory model settings, active costs, and financial cutover requirements; the actual requirement instead calls for inspecting the sales trade agreement's customer grouping, currency, and date criteria.

B:

Configure the appropriate customer price group and matching sales trade agreement. Inspecting customer price-group membership and trade agreement matching conditions tests that mechanism, but it does not establish the reported condition—a reseller requires different default sales prices across currency-specific customer groups.

D:

Maintain the approved site-specific cost record and validate its activation context. Its technical evidence involves confirming that examine costing version dimension specificity, site applicability, and active price records. For the stated question, inspecting the sales trade agreement's customer grouping, currency, and date criteria is the more relevant test.

Question 602

While diagnosing the following exception — An asset moves across departments but the maintenance team wants to keep its type and lifecycle history intact — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Creating a new asset every time the equipment changes department.
  2. Creating only a one-time reactive order and expecting it to recur automatically.
  3. Relying on verbal instructions instead of configuring repeatable work order defaults.
  4. Classifying all work as planned maintenance because each order was eventually scheduled.

Explanation

Correct Answer

A:

The unsafe assumption is: Creating a new asset every time the equipment changes department. In the scenario, An asset moves across departments but the maintenance team wants to keep its type and lifecycle history intact. The appropriate controlled response is Update authorized location or responsibility fields without recreating the physical asset. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Creating only a one-time reactive order and expecting it to recur automatically. The check concerns creating only a one-time reactive order and expecting it to recur automatically, not confirming that creating a new asset every time the equipment changes department.

C:

Relying on verbal instructions instead of configuring repeatable work order defaults. This assesses relying on verbal instructions instead of configuring repeatable work order defaults; it does not determine the reported condition—while diagnosing the following exception — An asset moves across departments but the maintenance team wants to keep its type and lifecycle history intact.

D:

Classifying all work as planned maintenance because each order was eventually scheduled. The case-specific requirement is confirming that creating a new asset every time the equipment changes department, which that option does not establish.

Question 603

The current Dynamics 365 process fails to meet this requirement: A mobile device deployed to a different distribution center continues to default to the old warehouse. The investigation is complete. Which operational change provides the right fix?

  1. Configure the app connection and approved worker sign-in for the target environment.
  2. Configure the device and worker context for the authorized destination warehouse.
  3. Adjust supported mobile display settings while leaving transaction validations intact.
  4. Reassign the worker to an approved cycle-counting menu and revoke no-longer-needed access.

Explanation

Correct Answer

B:

The supported next step is: Configure the device and worker context for the authorized destination warehouse. The observed requirement is A mobile device deployed to a different distribution center continues to default to the old warehouse. The diagnostic check was: Inspect worker warehouse assignment, selected facility context, and menu settings. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure the app connection and approved worker sign-in for the target environment. That alternative can be assessed by checking the mobile app connection settings, authentication, environment, and worker setup; the actual requirement instead calls for inspecting worker warehouse assignment, selected facility context, and menu settings.

C:

Adjust supported mobile display settings while leaving transaction validations intact. Reviewing mobile app display settings, step instructions, and permitted usability configuration tests that mechanism, but it does not establish the reported condition—a mobile device deployed to a different distribution center continues to default to the old warehouse.

D:

Reassign the worker to an approved cycle-counting menu and revoke no-longer-needed access. Its technical evidence involves reviewing the current worker permission set and eligible mobile menus for the new role. For the stated question, inspecting worker warehouse assignment, selected facility context, and menu settings is the more relevant test.

Question 604

The current Dynamics 365 process fails to meet this requirement: An inbound shipping container has a domestic truck carrier booked while receiving staff expect a different arrival schedule. The investigation is complete. Which operational change provides the right fix?

  1. Configure automatic freight matching for eligible amounts with manual exception handling.
  2. Configure route plan and guide criteria for the relevant transport stages.
  3. Split or plan the loads to honor eligible shipments and delivery commitments.
  4. Coordinate the assigned carrier, arrival slot, and warehouse receiving load plan.

Explanation

Correct Answer

D:

The supported next step is: Coordinate the assigned carrier, arrival slot, and warehouse receiving load plan. The observed requirement is An inbound shipping container has a domestic truck carrier booked while receiving staff expect a different arrival schedule. The diagnostic check was: Check dock appointment and transportation plan against the container's voyage milestones. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure automatic freight matching for eligible amounts with manual exception handling. That alternative is checked by reviewing automatic reconciliation rules, charge tolerances, and exceptions requiring review; the actual requirement instead calls for checking dock appointment and transportation plan against the container's voyage milestones.

B:

Configure route plan and guide criteria for the relevant transport stages. Reviewing route plans, route guides, and constraints for the supported shipment scenarios tests that mechanism, but it does not establish the reported condition—an inbound shipping container has a domestic truck carrier booked while receiving staff expect a different arrival schedule.

C:

Split or plan the loads to honor eligible shipments and delivery commitments. Its technical evidence involves reviewing outbound load grouping, delivery deadlines, and routing capacity constraints. For the stated question, checking dock appointment and transportation plan against the container's voyage milestones is the more relevant test.

Question 605

The business raises this issue: An engineering team wants a released product visible for design review but blocked from purchase until compliance approval. The investigation has established the following evidence: Examine product lifecycle states and transactions allowed for the candidate item. Which configuration or transaction step best addresses the requirement?

  1. Create and approve the BOM versions with distinct effective dates and applicable site or dimensions.
  2. Add and release only approved new variants while preserving existing orderable combinations.
  3. Assign an appropriate product lifecycle state and enforce its intended process restrictions.
  4. Edit the shared definition for global attributes and maintain company-specific defaults in each legal entity.

Explanation

Correct Answer

C:

The supported next step is: Assign an appropriate product lifecycle state and enforce its intended process restrictions. The observed requirement is An engineering team wants a released product visible for design review but blocked from purchase until compliance approval. The diagnostic check was: Examine product lifecycle states and transactions allowed for the candidate item. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Create and approve the BOM versions with distinct effective dates and applicable site or dimensions. That alternative can be assessed by checking BOM versions, approval status, effective dates, and applicable product dimensions; the actual requirement instead calls for confirming that examine product lifecycle states and transactions allowed for the candidate item.

B:

Add and release only approved new variants while preserving existing orderable combinations. Comparing active variant records, lifecycle settings, and available product dimension values tests that mechanism, but it does not establish the reported condition—an engineering team wants a released product visible for design review but blocked from purchase until compliance approval.

D:

Edit the shared definition for global attributes and maintain company-specific defaults in each legal entity. Its technical evidence involves identifying which fields are shared product attributes and which are released-company controls. For the stated question, confirming that examine product lifecycle states and transactions allowed for the candidate item is the more relevant test.

Question 606

The business raises this issue: A company wants stockable items and service charges to post and behave differently in inventory accounting. The investigation has established the following evidence: Inspect item model group inventory and posting behavior for each item class. Which configuration or transaction step best addresses the requirement?

  1. Assign appropriate item model groups and related posting settings to stocked goods versus services.
  2. Assign a compatible tracking dimension group and serial registration workflow.
  3. Configure the appropriate ownership and consignment handling rather than a separate product code.
  4. Plan a controlled inventory migration or item redesign when changing transacted dimension structures.

Explanation

Correct Answer

A:

The supported next step is: Assign appropriate item model groups and related posting settings to stocked goods versus services. The observed requirement is A company wants stockable items and service charges to post and behave differently in inventory accounting. The diagnostic check was: Inspect item model group inventory and posting behavior for each item class. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Assign a compatible tracking dimension group and serial registration workflow. That alternative is checked by confirming that examine serial number tracking requirements across receiving, issue, and returns; the actual requirement instead calls for inspecting item model group inventory and posting behavior for each item class.

C:

Configure the appropriate ownership and consignment handling rather than a separate product code. Inspecting ownership-related inventory dimensions and consignment processes tests that mechanism, but it does not establish the reported condition—a company wants stockable items and service charges to post and behave differently in inventory accounting.

D:

Plan a controlled inventory migration or item redesign when changing transacted dimension structures. Its technical evidence involves comparing existing on-hand and open transactions with the requested storage dimension change. For the stated question, inspecting item model group inventory and posting behavior for each item class is the more relevant test.

Question 607

The consultant reviews potential shortcuts after learning that a picker cannot find a work order on the mobile device although the sales shipment was released. Which belief must be challenged to avoid a misleading or uncontrolled result?

  1. Assuming work is split whenever item weight changes with no work break configuration.
  2. Assuming each sales line is one physical carton regardless of item dimensions.
  3. Making the sales order larger as a workaround for missing replenishment work.
  4. Giving every warehouse worker unrestricted access to all work as the first troubleshooting step.

Explanation

Correct Answer

D:

The unsafe assumption is: Giving every warehouse worker unrestricted access to all work as the first troubleshooting step. In the scenario, A picker cannot find a work order on the mobile device although the sales shipment was released. The appropriate controlled response is Correct the worker's menu and eligible work settings while retaining release controls. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Assuming work is split whenever item weight changes with no work break configuration. The check concerns assuming work is split whenever item weight changes with no work break configuration, not confirming that giving every warehouse worker unrestricted access to all work as the first troubleshooting step.

B:

Assuming each sales line is one physical carton regardless of item dimensions. This assesses assuming each sales line is one physical carton regardless of item dimensions; it does not determine the reported condition—the consultant reviews potential shortcuts after learning that a picker cannot find a work order on the mobile device although the sales shipment was.

C:

Making the sales order larger as a workaround for missing replenishment work. The case-specific requirement is confirming that giving every warehouse worker unrestricted access to all work as the first troubleshooting step, which that option does not establish.

Question 608

The business raises this issue: A planner needs an alert when an existing purchase should be accelerated to meet a customer's earlier date. The investigation has established the following evidence: Inspect action message settings and the relevant coverage group time fences. Which configuration or transaction step best addresses the requirement?

  1. Configure min/max item coverage with authorized replenishment thresholds.
  2. Enable appropriate advance action messages and examine planned supply dates.
  3. Assign suitable coverage groups and item coverage overrides to each inventory class.
  4. Maintain an item-specific coverage override for the affected site and item.

Explanation

Correct Answer

B:

The supported next step is: Enable appropriate advance action messages and examine planned supply dates. The observed requirement is A planner needs an alert when an existing purchase should be accelerated to meet a customer's earlier date. The diagnostic check was: Inspect action message settings and the relevant coverage group time fences. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure min/max item coverage with authorized replenishment thresholds. That alternative is checked by inspecting item coverage code, minimum, maximum, and effective planning dimensions; the actual requirement instead calls for inspecting action message settings and the relevant coverage group time fences.

C:

Assign suitable coverage groups and item coverage overrides to each inventory class. Reviewing coverage groups, procurement lead times, and item-specific demand characteristics tests that mechanism, but it does not establish the reported condition—a planner needs an alert when an existing purchase should be accelerated to meet a customer's earlier date.

D:

Maintain an item-specific coverage override for the affected site and item. Its technical evidence involves comparing coverage group defaults with the item coverage record's scoped overrides. For the stated question, inspecting action message settings and the relevant coverage group time fences is the more relevant test.

Question 609

The current Dynamics 365 process fails to meet this requirement: A deployment installs the mobile app but devices cannot authenticate or connect to the correct environment. The investigation is complete. Which operational change provides the right fix?

  1. Reassign the worker to an approved cycle-counting menu and revoke no-longer-needed access.
  2. Adjust supported mobile display settings while leaving transaction validations intact.
  3. Configure an appropriate mobile device detour for the inspection step.
  4. Configure the app connection and approved worker sign-in for the target environment.

Explanation

Correct Answer

D:

The supported next step is: Configure the app connection and approved worker sign-in for the target environment. The observed requirement is A deployment installs the mobile app but devices cannot authenticate or connect to the correct environment. The diagnostic check was: Check the mobile app connection settings, authentication, environment, and worker setup. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Reassign the worker to an approved cycle-counting menu and revoke no-longer-needed access. That alternative is checked by reviewing the current worker permission set and eligible mobile menus for the new role; the actual requirement instead calls for checking the mobile app connection settings, authentication, environment, and worker setup.

B:

Adjust supported mobile display settings while leaving transaction validations intact. Reviewing mobile app display settings, step instructions, and permitted usability configuration tests that mechanism, but it does not establish the reported condition—a deployment installs the mobile app but devices cannot authenticate or connect to the correct environment.

C:

Configure an appropriate mobile device detour for the inspection step. Its technical evidence involves reviewing supported mobile detour steps and information needed before returning to work. For the stated question, checking the mobile app connection settings, authentication, environment, and worker setup is the more relevant test.

Question 610

While diagnosing the following exception — A supplier's component fails inspection and the quality team needs a recorded defect category and remediation action — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Embedding supplier correction charges only inside a test result comment.
  2. Assuming a configured test group will run automatically without an applicable quality association.
  3. Treating a customer credit note as technical proof the return passed inspection.
  4. Closing the supplier issue solely by editing the item's product description.

Explanation

Correct Answer

D:

The unsafe assumption is: Closing the supplier issue solely by editing the item's product description. In the scenario, A supplier's component fails inspection and the quality team needs a recorded defect category and remediation action. The appropriate controlled response is Create a nonconformance linked to the affected purchase or inventory record with a disposition. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Embedding supplier correction charges only inside a test result comment. The check concerns embedding supplier correction charges only inside a test result comment, not confirming that closing the supplier issue solely by editing the item's product description.

B:

Assuming a configured test group will run automatically without an applicable quality association. This assesses assuming a configured test group will run automatically without an applicable quality association; it does not determine the reported condition—while diagnosing the following exception — A supplier's component fails inspection and the quality team needs a recorded defect category and remediation.

C:

Treating a customer credit note as technical proof the return passed inspection. The case-specific requirement is confirming that closing the supplier issue solely by editing the item's product description, which that option does not establish.