mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 58

Question 570

A project team must resolve this supply-chain problem: A planner suspects old forecast demand is being counted twice with firm sales orders. After completing this check — Inspect forecast consumption and master planning parameters for the relevant plan — which supported action is best suited to the case?

  1. Configure suitable demand forecast consumption settings and verify firm-order treatment.
  2. Enable appropriate advance action messages and examine planned supply dates.
  3. Maintain separate master plans for operational execution and what-if analysis.
  4. Configure and interpret postpone or reschedule suggestions under approved planning policy.

Explanation

Correct Answer

A:

The supported next step is: Configure suitable demand forecast consumption settings and verify firm-order treatment. The observed requirement is A planner suspects old forecast demand is being counted twice with firm sales orders. The diagnostic check was: Inspect forecast consumption and master planning parameters for the relevant plan. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Enable appropriate advance action messages and examine planned supply dates. That alternative is checked by inspecting action message settings and the relevant coverage group time fences; the actual requirement instead calls for inspecting forecast consumption and master planning parameters for the relevant plan.

C:

Maintain separate master plans for operational execution and what-if analysis. Inspecting master plan definitions, scheduling parameters, and consumption of forecast data tests that mechanism, but it does not establish the reported condition—a planner suspects old forecast demand is being counted twice with firm sales orders.

D:

Configure and interpret postpone or reschedule suggestions under approved planning policy. Its technical evidence involves reviewing postponement action settings, planning time fences, and eligible order status. For the stated question, inspecting forecast consumption and master planning parameters for the relevant plan is the more relevant test.

Question 571

The consultant reviews potential shortcuts after learning that inventory close reports unsettled cost differences after late purchase invoices change running costs. Which belief must be challenged to avoid a misleading or uncontrolled result?

  1. Manually overwriting posted issue costs instead of using controlled inventory settlement.
  2. Blocking the entire product globally when only one batch is under investigation.
  3. Treating the absence of reported discrepancies as evidence every location was counted.
  4. Using a purchase receipt to represent an internal bin relocation.

Explanation

Correct Answer

A:

The unsafe assumption is: Manually overwriting posted issue costs instead of using controlled inventory settlement. In the scenario, Inventory close reports unsettled cost differences after late purchase invoices change running costs. The appropriate controlled response is Run the supported inventory closing and adjustment procedure for the approved accounting period. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Blocking the entire product globally when only one batch is under investigation. The check concerns blocking the entire product globally when only one batch is under investigation, not confirming that manually overwriting posted issue costs instead of using controlled inventory settlement.

C:

Treating the absence of reported discrepancies as evidence every location was counted. This assesses treating the absence of reported discrepancies as evidence every location was counted; it does not determine the reported condition—the consultant reviews potential shortcuts after learning that inventory close reports unsettled cost differences after late purchase invoices change.

D:

Using a purchase receipt to represent an internal bin relocation. The case-specific requirement is confirming that manually overwriting posted issue costs instead of using controlled inventory settlement, which that option does not establish.

Question 572

While diagnosing the following exception — A business needs multiple shipments grouped in a wave for batch release and picking — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Concatenating unstructured text and assuming scanners interpret it as compliant GS1 data.
  2. Creating standalone manual work for every order while expecting wave grouping automatically.
  3. Assuming a physical location's availability guarantees its inventory is released.
  4. Printing a generic product number where the operation requires unique container identification.

Explanation

Correct Answer

B:

The unsafe assumption is: Creating standalone manual work for every order while expecting wave grouping automatically. In the scenario, A business needs multiple shipments grouped in a wave for batch release and picking. The appropriate controlled response is Configure an outbound wave template for appropriate sales order workloads. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Concatenating unstructured text and assuming scanners interpret it as compliant GS1 data. The check concerns concatenating unstructured text and assuming scanners interpret it as compliant GS1 data, not confirming that creating standalone manual work for every order while expecting wave grouping automatically.

C:

Assuming a physical location's availability guarantees its inventory is released. This assesses assuming a physical location's availability guarantees its inventory is released; it does not determine the reported condition—while diagnosing the following exception — A business needs multiple shipments grouped in a wave for batch release and picking — a stakeholder suggests.

D:

Printing a generic product number where the operation requires unique container identification. The case-specific requirement is confirming that creating standalone manual work for every order while expecting wave grouping automatically, which that option does not establish.

Question 573

The current Dynamics 365 process fails to meet this requirement: A transfer order is shipped from a regional warehouse but the destination reports stock prematurely before receipt. The investigation is complete. Which operational change provides the right fix?

  1. Complete destination receipt only after goods are physically verified.
  2. Use the supported BOM journal and component posting process for kit assembly.
  3. Use an appropriate inventory movement or warehouse movement process with both locations recorded.
  4. Run the supported inventory closing and adjustment procedure for the approved accounting period.

Explanation

Correct Answer

A:

The supported next step is: Complete destination receipt only after goods are physically verified. The observed requirement is A transfer order is shipped from a regional warehouse but the destination reports stock prematurely before receipt. The diagnostic check was: Review the transfer order's shipment, in-transit, and destination receipt states. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Use the supported BOM journal and component posting process for kit assembly. That alternative is checked by verifying the BOM structure and journal type appropriate to the inventory assembly event; the actual requirement instead calls for reviewing the transfer order's shipment, in-transit, and destination receipt states.

C:

Use an appropriate inventory movement or warehouse movement process with both locations recorded. Confirming that examine the required source and destination inventory dimensions for the bin relocation tests that mechanism, but it does not establish the reported condition—a transfer order is shipped from a regional warehouse but the destination reports stock prematurely before receipt.

D:

Run the supported inventory closing and adjustment procedure for the approved accounting period. Its technical evidence involves reviewing inventory settlement, closing periods, and cost adjustment transactions. For the stated question, reviewing the transfer order's shipment, in-transit, and destination receipt states is the more relevant test.

Question 574

A project team is about to close this Dynamics 365 issue: A catalog offers a master shirt in size and color combinations, with inventory stored across several warehouses. Which assumption would be particularly unsafe for this resolution?

  1. Relying on a product dimension group to track physical warehouse bins.
  2. Entering twelve separate purchase lines to compensate for a missing unit conversion.
  3. Making each warehouse a product variant instead of an inventory storage dimension.
  4. Assuming physical custody means the business already owns the stock.

Explanation

Correct Answer

C:

The unsafe assumption is: Making each warehouse a product variant instead of an inventory storage dimension. In the scenario, A catalog offers a master shirt in size and color combinations, with inventory stored across several warehouses. The appropriate controlled response is Configure product dimensions for size and color and storage dimensions for warehouses. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Relying on a product dimension group to track physical warehouse bins. The check concerns relying on a product dimension group to track physical warehouse bins, not confirming that making each warehouse a product variant instead of an inventory storage dimension.

B:

Entering twelve separate purchase lines to compensate for a missing unit conversion. This assesses entering twelve separate purchase lines to compensate for a missing unit conversion; it does not determine the reported condition—a catalog offers a master shirt in size and color combinations, with inventory stored across several warehouses.

D:

Assuming physical custody means the business already owns the stock. The case-specific requirement is confirming that making each warehouse a product variant instead of an inventory storage dimension, which that option does not establish.

Question 575

A project team must resolve this supply-chain problem: A warehouse label prints a valid item barcode but not the matching packing unit for mobile picking. After completing this check — Review item barcode unit mappings and warehouse unit sequence group configuration — which supported action is best suited to the case?

  1. Correct the active barcode-to-variant mapping after checking historical trace requirements.
  2. Maintain supported item unit conversions and appropriate default units.
  3. Align barcode associations and permitted picking units in the supported mobile flow.
  4. Configure the intended filter codes and compatible warehouse location or work selection conditions.

Explanation

Correct Answer

C:

The supported next step is: Align barcode associations and permitted picking units in the supported mobile flow. The observed requirement is A warehouse label prints a valid item barcode but not the matching packing unit for mobile picking. The diagnostic check was: Review item barcode unit mappings and warehouse unit sequence group configuration. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Correct the active barcode-to-variant mapping after checking historical trace requirements. That alternative is checked by reviewing product barcode records, active variant IDs, and scanner unit context; the actual requirement instead calls for reviewing item barcode unit mappings and warehouse unit sequence group configuration.

B:

Maintain supported item unit conversions and appropriate default units. Checking the product's purchase, inventory, and sales units and conversion factors tests that mechanism, but it does not establish the reported condition—a warehouse label prints a valid item barcode but not the matching packing unit for mobile picking.

D:

Configure the intended filter codes and compatible warehouse location or work selection conditions. Its technical evidence involves inspecting warehouse product filter code definitions and matching workflow rules. For the stated question, reviewing item barcode unit mappings and warehouse unit sequence group configuration is the more relevant test.

Question 576

A project team is about to close this Dynamics 365 issue: A distribution company receives cases from one supplier but singles from another for the same item. Which assumption would be particularly unsafe for this resolution?

  1. Creating an extra product master solely because a second barcode format exists.
  2. Using product marketing categories as if they automatically drove warehouse filtering.
  3. Creating separate physical products just to represent different supplier packaging sizes.
  4. Assuming a supplier contract alone configures quantity validation in the item master.

Explanation

Correct Answer

C:

The unsafe assumption is: Creating separate physical products just to represent different supplier packaging sizes. In the scenario, A distribution company receives cases from one supplier but singles from another for the same item. The appropriate controlled response is Set the supported unit conversions and use purchase-line units appropriate to each supplier. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Creating an extra product master solely because a second barcode format exists. The check concerns creating an extra product master solely because a second barcode format exists, not confirming that creating separate physical products just to represent different supplier packaging sizes.

B:

Using product marketing categories as if they automatically drove warehouse filtering. This assesses using product marketing categories as if they automatically drove warehouse filtering; it does not determine the reported condition—a distribution company receives cases from one supplier but singles from another for the same item.

D:

Assuming a supplier contract alone configures quantity validation in the item master. The case-specific requirement is confirming that creating separate physical products just to represent different supplier packaging sizes, which that option does not establish.

Question 577

The current Dynamics 365 process fails to meet this requirement: A technician creates a work order but the system schedules it beyond the available machine shutdown window. The investigation is complete. Which operational change provides the right fix?

  1. Configure work order defaults and assignments for the approved maintenance process.
  2. Adjust the work order scheduling requirements and approved maintenance window.
  3. Configure an asset lifecycle model with appropriate states and controlled transitions.
  4. Configure resource capacity and scheduling constraints for the maintenance work orders.

Explanation

Correct Answer

B:

The supported next step is: Adjust the work order scheduling requirements and approved maintenance window. The observed requirement is A technician creates a work order but the system schedules it beyond the available machine shutdown window. The diagnostic check was: Inspect work order scheduling settings, resource availability, and planned downtime constraints. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure work order defaults and assignments for the approved maintenance process. That alternative is checked by inspecting work order settings and relevant asset type or maintenance setup; the actual requirement instead calls for inspecting work order scheduling settings, resource availability, and planned downtime constraints.

C:

Configure an asset lifecycle model with appropriate states and controlled transitions. Reviewing asset lifecycle models and which transitions or activities are allowed tests that mechanism, but it does not establish the reported condition—a technician creates a work order but the system schedules it beyond the available machine shutdown window.

D:

Configure resource capacity and scheduling constraints for the maintenance work orders. Its technical evidence involves inspecting available resource calendars, competencies, and scheduling capacity for work orders. For the stated question, inspecting work order scheduling settings, resource availability, and planned downtime constraints is the more relevant test.

Question 578

A project team is about to close this Dynamics 365 issue: A multichannel retailer imports two different barcode schemes for the same physical item. Which assumption would be particularly unsafe for this resolution?

  1. Assuming one global default necessarily fits different regional fulfillment constraints.
  2. Creating an extra product master solely because a second barcode format exists.
  3. Assuming a supplier contract alone configures quantity validation in the item master.
  4. Overwriting year-round defaults because a single promotional campaign is temporary.

Explanation

Correct Answer

B:

The unsafe assumption is: Creating an extra product master solely because a second barcode format exists. In the scenario, A multichannel retailer imports two different barcode schemes for the same physical item. The appropriate controlled response is Maintain valid barcodes for the appropriate product and unit or variant contexts. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Assuming one global default necessarily fits different regional fulfillment constraints. The check concerns assuming one global default necessarily fits different regional fulfillment constraints, not confirming that creating an extra product master solely because a second barcode format exists.

C:

Assuming a supplier contract alone configures quantity validation in the item master. This assesses assuming a supplier contract alone configures quantity validation in the item master; it does not determine the reported condition—a multichannel retailer imports two different barcode schemes for the same physical item.

D:

Overwriting year-round defaults because a single promotional campaign is temporary. The case-specific requirement is confirming that creating an extra product master solely because a second barcode format exists, which that option does not establish.

Question 579

A project team must resolve this supply-chain problem: A stock item is switched to standard cost while finance has not approved the opening standard cost. After completing this check — Review inventory model settings, active costs, and financial cutover requirements — which supported action is best suited to the case?

  1. Correct the applicable BOM or missing component cost and recalculate the planned rollup.
  2. Configure the appropriate customer price group and matching sales trade agreement.
  3. Correct competing agreement conditions and test the relevant customer-group relation.
  4. Complete approved standard-cost setup and controlled cutover before posting new transactions.

Explanation

Correct Answer

D:

The supported next step is: Complete approved standard-cost setup and controlled cutover before posting new transactions. The observed requirement is A stock item is switched to standard cost while finance has not approved the opening standard cost. The diagnostic check was: Review inventory model settings, active costs, and financial cutover requirements. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Correct the applicable BOM or missing component cost and recalculate the planned rollup. That alternative is checked by comparing active BOM version, cost rollup setup, and each component's cost record; the actual requirement instead calls for reviewing inventory model settings, active costs, and financial cutover requirements.

B:

Configure the appropriate customer price group and matching sales trade agreement. Inspecting customer price-group membership and trade agreement matching conditions tests that mechanism, but it does not establish the reported condition—a stock item is switched to standard cost while finance has not approved the opening standard cost.

C:

Correct competing agreement conditions and test the relevant customer-group relation. Its technical evidence involves reviewing agreement priority, relation specificity, applicable dates, and search behavior. For the stated question, reviewing inventory model settings, active costs, and financial cutover requirements is the more relevant test.

Question 580

A project team is about to close this Dynamics 365 issue: A retailer wants a shirt product master with seasonal colors introduced gradually while old variants remain orderable. Which assumption would be particularly unsafe for this resolution?

  1. Creating unrelated distinct products for every variant and losing master-level consistency.
  2. Overwriting local inventory defaults while making a shared catalog-description change.
  3. Assuming two similarly named items can safely share a component structure without review.
  4. Replacing the entire product master every season and losing variant continuity.

Explanation

Correct Answer

D:

The unsafe assumption is: Replacing the entire product master every season and losing variant continuity. In the scenario, A retailer wants a shirt product master with seasonal colors introduced gradually while old variants remain orderable. The appropriate controlled response is Add and release only approved new variants while preserving existing orderable combinations. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Creating unrelated distinct products for every variant and losing master-level consistency. The check concerns creating unrelated distinct products for every variant and losing master-level consistency, not confirming that replacing the entire product master every season and losing variant continuity.

B:

Overwriting local inventory defaults while making a shared catalog-description change. This assesses overwriting local inventory defaults while making a shared catalog-description change; it does not determine the reported condition—a retailer wants a shirt product master with seasonal colors introduced gradually while old variants remain orderable.

C:

Assuming two similarly named items can safely share a component structure without review. The case-specific requirement is confirming that replacing the entire product master every season and losing variant continuity, which that option does not establish.