mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 21

Question 200

The business raises this issue: An employee requests a laptop but only a buyer may issue an external purchase order after manager approval. The investigation has established the following evidence: Check purchase requisition policy and the purchasing workflow states. Which configuration or transaction step best addresses the requirement?

  1. Configure purchasing workflow escalation based on the intended amount and policy.
  2. Process physical arrival and product receipt before the final invoice step.
  3. Enable vendor collaboration for the authorized supplier and scope its PO interactions.
  4. Route the requisition through the authorized approval process before generating a purchase order.

Explanation

Correct Answer

D:

The supported next step is: Route the requisition through the authorized approval process before generating a purchase order. The observed requirement is An employee requests a laptop but only a buyer may issue an external purchase order after manager approval. The diagnostic check was: Check purchase requisition policy and the purchasing workflow states. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure purchasing workflow escalation based on the intended amount and policy. That alternative is checked by reviewing conditional workflow rules, approval roles, and currency threshold interpretation; the actual requirement instead calls for checking purchase requisition policy and the purchasing workflow states.

B:

Process physical arrival and product receipt before the final invoice step. Inspecting registration and product receipt progress for the purchase order line tests that mechanism, but it does not establish the reported condition—an employee requests a laptop but only a buyer may issue an external purchase order after manager approval.

C:

Enable vendor collaboration for the authorized supplier and scope its PO interactions. Its technical evidence involves checking vendor collaboration onboarding, role access, and supported confirmation workflow. For the stated question, checking purchase requisition policy and the purchasing workflow states is the more relevant test.

Question 201

A project team is about to close this Dynamics 365 issue: A sales team promises next-day delivery while all physical stock is already reserved for earlier orders. Which assumption would be particularly unsafe for this resolution?

  1. Creating an unrelated BOM-only manufacturing record and assuming it defines the sales bundle.
  2. Creating a new positive sales invoice as a substitute for a return credit.
  3. Treating total on-hand stock as unreserved immediately available-to-promise inventory.
  4. Posting inventory issue transactions directly from an unaccepted quotation.

Explanation

Correct Answer

C:

The unsafe assumption is: Treating total on-hand stock as unreserved immediately available-to-promise inventory. In the scenario, A sales team promises next-day delivery while all physical stock is already reserved for earlier orders. The appropriate controlled response is Use the appropriate ATP or delivery-date calculation before confirming the promise. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Creating an unrelated BOM-only manufacturing record and assuming it defines the sales bundle. The check concerns creating an unrelated BOM-only manufacturing record and assuming it defines the sales bundle, not confirming that treating total on-hand stock as unreserved immediately available-to-promise inventory.

B:

Creating a new positive sales invoice as a substitute for a return credit. This assesses creating a new positive sales invoice as a substitute for a return credit; it does not determine the reported condition—a sales team promises next-day delivery while all physical stock is already reserved for earlier orders.

D:

Posting inventory issue transactions directly from an unaccepted quotation. The case-specific requirement is confirming that treating total on-hand stock as unreserved immediately available-to-promise inventory, which that option does not establish.

Question 202

A project team must resolve this supply-chain problem: A manufacturer needs suppliers classified by payment terms and purchasing restrictions before buyers can place approved orders. After completing this check — Inspect vendor account setup, groups, posting profiles, and relevant purchasing policies — which supported action is best suited to the case?

  1. Create the vendor master with correct group and purchasing controls.
  2. Process physical arrival and product receipt before the final invoice step.
  3. Configure a purchase agreement with appropriate commitment, dates, and release orders.
  4. Use a request for quotation process and accept the selected vendor bid.

Explanation

Correct Answer

A:

The supported next step is: Create the vendor master with correct group and purchasing controls. The observed requirement is A manufacturer needs suppliers classified by payment terms and purchasing restrictions before buyers can place approved orders. The diagnostic check was: Inspect vendor account setup, groups, posting profiles, and relevant purchasing policies. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Process physical arrival and product receipt before the final invoice step. That alternative is checked by inspecting registration and product receipt progress for the purchase order line; the actual requirement instead calls for inspecting vendor account setup, groups, posting profiles, and relevant purchasing policies.

C:

Configure a purchase agreement with appropriate commitment, dates, and release orders. Confirming that differentiate a purchase agreement from a one-time purchase order tests that mechanism, but it does not establish the reported condition—a manufacturer needs suppliers classified by payment terms and purchasing restrictions before buyers can place approved orders.

D:

Use a request for quotation process and accept the selected vendor bid. Its technical evidence involves reviewing the RFQ case, vendor invitations, responses, and award criteria. For the stated question, inspecting vendor account setup, groups, posting profiles, and relevant purchasing policies is the more relevant test.

Question 203

The business raises this issue: An electronics wholesaler sells serialized devices and must identify each returned unit individually. The investigation has established the following evidence: Examine serial number tracking requirements across receiving, issue, and returns. Which configuration or transaction step best addresses the requirement?

  1. Keep color under product variants while using tracking dimensions only for actual traceability.
  2. Assign a compatible tracking dimension group and serial registration workflow.
  3. Configure product dimensions for size and color and storage dimensions for warehouses.
  4. Plan a controlled inventory migration or item redesign when changing transacted dimension structures.

Explanation

Correct Answer

B:

The supported next step is: Assign a compatible tracking dimension group and serial registration workflow. The observed requirement is An electronics wholesaler sells serialized devices and must identify each returned unit individually. The diagnostic check was: Examine serial number tracking requirements across receiving, issue, and returns. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Keep color under product variants while using tracking dimensions only for actual traceability. That alternative is checked by reviewing the item's product dimension and tracking dimension group assignments; the actual requirement instead calls for confirming that examine serial number tracking requirements across receiving, issue, and returns.

C:

Configure product dimensions for size and color and storage dimensions for warehouses. Separating product variant dimensions from physical storage dimensions in the item setup tests that mechanism, but it does not establish the reported condition—an electronics wholesaler sells serialized devices and must identify each returned unit individually.

D:

Plan a controlled inventory migration or item redesign when changing transacted dimension structures. Its technical evidence involves comparing existing on-hand and open transactions with the requested storage dimension change. For the stated question, confirming that examine serial number tracking requirements across receiving, issue, and returns is the more relevant test.

Question 204

A functional consultant has confirmed the following condition: A fleet operator needs different status transitions for planned, operational, down, and retired assets. The relevant check is: Review asset lifecycle models and which transitions or activities are allowed. What should the team implement or process?

  1. Use asset loan functionality to record assignments and expected returns.
  2. Configure an asset lifecycle model with appropriate states and controlled transitions.
  3. Update authorized location or responsibility fields without recreating the physical asset.
  4. Create appropriate asset types and associate equipment with the correct type.

Explanation

Correct Answer

B:

The supported next step is: Configure an asset lifecycle model with appropriate states and controlled transitions. The observed requirement is A fleet operator needs different status transitions for planned, operational, down, and retired assets. The diagnostic check was: Review asset lifecycle models and which transitions or activities are allowed. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Use asset loan functionality to record assignments and expected returns. That alternative is checked by reviewing asset loans, custody dates, and return steps for the shared equipment; the actual requirement instead calls for reviewing asset lifecycle models and which transitions or activities are allowed.

C:

Update authorized location or responsibility fields without recreating the physical asset. Reviewing asset identification, type, lifecycle and functional-location association tests that mechanism, but it does not establish the reported condition—a fleet operator needs different status transitions for planned, operational, down, and retired assets.

D:

Create appropriate asset types and associate equipment with the correct type. Its technical evidence involves reviewing asset types and the asset attributes needed by each equipment class. For the stated question, reviewing asset lifecycle models and which transitions or activities are allowed is the more relevant test.

Question 205

The business raises this issue: A manufacturer retires a stocked item but needs to preserve historical inventory transactions for audit. The investigation has established the following evidence: Review allowed product lifecycle transitions and whether open transactions still exist. Which configuration or transaction step best addresses the requirement?

  1. Add and release only approved new variants while preserving existing orderable combinations.
  2. Use lifecycle-based operational restrictions without deleting historical product and inventory records.
  3. Release the shared product into the receiving legal entity and complete its company-specific defaults.
  4. Define distinct products when inventory, accounting, or lifecycle treatment truly differs.

Explanation

Correct Answer

B:

The supported next step is: Use lifecycle-based operational restrictions without deleting historical product and inventory records. The observed requirement is A manufacturer retires a stocked item but needs to preserve historical inventory transactions for audit. The diagnostic check was: Review allowed product lifecycle transitions and whether open transactions still exist. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Add and release only approved new variants while preserving existing orderable combinations. That alternative is checked by comparing active variant records, lifecycle settings, and available product dimension values; the actual requirement instead calls for reviewing allowed product lifecycle transitions and whether open transactions still exist.

C:

Release the shared product into the receiving legal entity and complete its company-specific defaults. Comparing the shared product definition with the released product record in the target legal entity tests that mechanism, but it does not establish the reported condition—a manufacturer retires a stocked item but needs to preserve historical inventory transactions for audit.

D:

Define distinct products when inventory, accounting, or lifecycle treatment truly differs. Its technical evidence involves comparing shared identifiers, released product numbers, and transaction references. For the stated question, reviewing allowed product lifecycle transitions and whether open transactions still exist is the more relevant test.

Question 206

A business process change is proposed because operators receive pallets but pick individual boxes, and mobile work must convert between these units in sequence. Which assertion is most likely to undermine the intended control or transaction outcome?

  1. Entering twelve separate purchase lines to compensate for a missing unit conversion.
  2. Tracking only the product number when individual-unit accountability is required.
  3. Treating a unit sequence group as automatic proof that all required conversions exist.
  4. Relying on a product dimension group to track physical warehouse bins.

Explanation

Correct Answer

C:

The unsafe assumption is: Treating a unit sequence group as automatic proof that all required conversions exist. In the scenario, Operators receive pallets but pick individual boxes, and mobile work must convert between these units in sequence. The appropriate controlled response is Configure unit sequence and valid unit conversions for pallets, cases, and eaches. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Entering twelve separate purchase lines to compensate for a missing unit conversion. The check concerns entering twelve separate purchase lines to compensate for a missing unit conversion, not confirming that treating a unit sequence group as automatic proof that all required conversions exist.

B:

Tracking only the product number when individual-unit accountability is required. This assesses tracking only the product number when individual-unit accountability is required; it does not determine the reported condition—a business process change is proposed because operators receive pallets but pick individual boxes, and mobile work must convert between these units in.

D:

Relying on a product dimension group to track physical warehouse bins. The case-specific requirement is confirming that treating a unit sequence group as automatic proof that all required conversions exist, which that option does not establish.

Question 207

The business raises this issue: A company turns on Planning Optimization but users continue judging results from a stale dynamic plan run. The investigation has established the following evidence: Compare plan run timestamps, Planning Optimization status, and current supply-demand records. Which configuration or transaction step best addresses the requirement?

  1. Run or schedule Planning Optimization for the intended master plan before accepting its proposals.
  2. Analyze delay messages and affected net requirements before changing promised delivery dates.
  3. Review and firm the appropriate planned transfer order with authorized timing.
  4. Apply component scheduling actions first and recalculate dependent parent supply.

Explanation

Correct Answer

A:

The supported next step is: Run or schedule Planning Optimization for the intended master plan before accepting its proposals. The observed requirement is A company turns on Planning Optimization but users continue judging results from a stale dynamic plan run. The diagnostic check was: Compare plan run timestamps, Planning Optimization status, and current supply-demand records. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Analyze delay messages and affected net requirements before changing promised delivery dates. That alternative is checked by reviewing delay messages, pegging relationships, and current supply schedule dates; the actual requirement instead calls for comparing plan run timestamps, Planning Optimization status, and current supply-demand records.

C:

Review and firm the appropriate planned transfer order with authorized timing. Inspecting source and destination warehouse coverage and transfer feasibility tests that mechanism, but it does not establish the reported condition—a company turns on Planning Optimization but users continue judging results from a stale dynamic plan run.

D:

Apply component scheduling actions first and recalculate dependent parent supply. Its technical evidence involves reviewing multilevel BOM dependencies and action suggestions for components and parents. For the stated question, comparing plan run timestamps, Planning Optimization status, and current supply-demand records is the more relevant test.

Question 208

A functional consultant has confirmed the following condition: Quality orders stay open indefinitely although test results are entered and a decision was recorded in a spreadsheet. The relevant check is: Check whether tests were validated and quality orders were formally completed in the system. What should the team implement or process?

  1. Validate results and complete the quality order through the supported workflow.
  2. Process the applicable quality order or nonconformance linked to the return.
  3. Record the defect and approved correction work under nonconformance management.
  4. Create a nonconformance linked to the affected purchase or inventory record with a disposition.

Explanation

Correct Answer

A:

The supported next step is: Validate results and complete the quality order through the supported workflow. The observed requirement is Quality orders stay open indefinitely although test results are entered and a decision was recorded in a spreadsheet. The diagnostic check was: Check whether tests were validated and quality orders were formally completed in the system. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Process the applicable quality order or nonconformance linked to the return. That alternative is checked by inspecting return order disposition and associated quality testing requirements; the actual requirement instead calls for checking whether tests were validated and quality orders were formally completed in the system.

C:

Record the defect and approved correction work under nonconformance management. Inspecting nonconformance and correction task setup including supplier association and costs tests that mechanism, but it does not establish the reported condition—quality orders stay open indefinitely although test results are entered and a decision was recorded in a spreadsheet.

D:

Create a nonconformance linked to the affected purchase or inventory record with a disposition. Its technical evidence involves reviewing the distinction between quality order test results and nonconformance management records. For the stated question, checking whether tests were validated and quality orders were formally completed in the system is the more relevant test.

Question 209

A project team must resolve this supply-chain problem: A container arrives with fewer units than documented in its voyage and the system flags a discrepancy. After completing this check — Inspect voyage over-under tolerances, packing evidence, and posted receiving quantities — which supported action is best suited to the case?

  1. Configure cost type codes and applicable auto-costs for the imported voyage or goods.
  2. Create an appropriate transfer voyage and add applicable freight cost estimates.
  3. Choose and configure the correct landed cost apportionment method for the voyage.
  4. Investigate and process the shortage within approved landed cost tolerance and claim procedures.

Explanation

Correct Answer

D:

The supported next step is: Investigate and process the shortage within approved landed cost tolerance and claim procedures. The observed requirement is A container arrives with fewer units than documented in its voyage and the system flags a discrepancy. The diagnostic check was: Inspect voyage over-under tolerances, packing evidence, and posted receiving quantities. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure cost type codes and applicable auto-costs for the imported voyage or goods. That alternative is checked by inspecting landed cost type codes, auto-cost rules, and allocation bases; the actual requirement instead calls for inspecting voyage over-under tolerances, packing evidence, and posted receiving quantities.

B:

Create an appropriate transfer voyage and add applicable freight cost estimates. Checking landed cost support for transfer-order-linked voyages and eligible cost categories tests that mechanism, but it does not establish the reported condition—a container arrives with fewer units than documented in its voyage and the system flags a discrepancy.

C:

Choose and configure the correct landed cost apportionment method for the voyage. Its technical evidence involves comparing voyage line values, quantity, weight data, and freight apportionment settings. For the stated question, inspecting voyage over-under tolerances, packing evidence, and posted receiving quantities is the more relevant test.

Question 210

A business process change is proposed because a subsidiary needs stock moved from a central warehouse but the generated proposal is a planned transfer. Which assertion is most likely to undermine the intended control or transaction outcome?

  1. Creating a vendor PO for demand whose approved supply source is an internal warehouse.
  2. Using stale exported planned orders as proof the revised policy has no effect.
  3. Bulk-firming every system-generated order because the plan run succeeded.
  4. Assuming a planned purchase order already constitutes a supplier contract.

Explanation

Correct Answer

A:

The unsafe assumption is: Creating a vendor PO for demand whose approved supply source is an internal warehouse. In the scenario, A subsidiary needs stock moved from a central warehouse but the generated proposal is a planned transfer. The appropriate controlled response is Review and firm the appropriate planned transfer order with authorized timing. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Using stale exported planned orders as proof the revised policy has no effect. The check concerns using stale exported planned orders as proof the revised policy has no effect, not confirming that creating a vendor PO for demand whose approved supply source is an internal warehouse.

C:

Bulk-firming every system-generated order because the plan run succeeded. This assesses bulk-firming every system-generated order because the plan run succeeded; it does not determine the reported condition—a business process change is proposed because a subsidiary needs stock moved from a central warehouse but the generated proposal is a planned transfer.

D:

Assuming a planned purchase order already constitutes a supplier contract. The case-specific requirement is confirming that creating a vendor PO for demand whose approved supply source is an internal warehouse, which that option does not establish.