mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 18

Question 170

The current Dynamics 365 process fails to meet this requirement: A factory wants every purchase receipt from a new critical vendor to trigger required incoming tests. The investigation is complete. Which operational change provides the right fix?

  1. Record the defect and approved correction work under nonconformance management.
  2. Configure a purchase-related quality association that generates the required quality orders.
  3. Create a nonconformance linked to the affected purchase or inventory record with a disposition.
  4. Validate results and complete the quality order through the supported workflow.

Explanation

Correct Answer

B:

The supported next step is: Configure a purchase-related quality association that generates the required quality orders. The observed requirement is A factory wants every purchase receipt from a new critical vendor to trigger required incoming tests. The diagnostic check was: Review quality associations for vendor, item, inventory reference, and event conditions. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Record the defect and approved correction work under nonconformance management. That alternative is checked by inspecting nonconformance and correction task setup including supplier association and costs; the actual requirement instead calls for reviewing quality associations for vendor, item, inventory reference, and event conditions.

C:

Create a nonconformance linked to the affected purchase or inventory record with a disposition. Reviewing the distinction between quality order test results and nonconformance management records tests that mechanism, but it does not establish the reported condition—a factory wants every purchase receipt from a new critical vendor to trigger required incoming tests.

D:

Validate results and complete the quality order through the supported workflow. Its technical evidence involves checking whether tests were validated and quality orders were formally completed in the system. For the stated question, reviewing quality associations for vendor, item, inventory reference, and event conditions is the more relevant test.

Question 171

A project team is about to close this Dynamics 365 issue: A distributor wants a minimum purchasing quantity of fifty and purchase multiples of ten. Which assumption would be particularly unsafe for this resolution?

  1. Creating an extra product master solely because a second barcode format exists.
  2. Equating a valid item identifier with a valid packaging-unit conversion.
  3. Assuming a supplier contract alone configures quantity validation in the item master.
  4. Using product marketing categories as if they automatically drove warehouse filtering.

Explanation

Correct Answer

C:

The unsafe assumption is: Assuming a supplier contract alone configures quantity validation in the item master. In the scenario, A distributor wants a minimum purchasing quantity of fifty and purchase multiples of ten. The appropriate controlled response is Configure purchase minimum and multiple quantity rules on the relevant released item. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Creating an extra product master solely because a second barcode format exists. The check concerns creating an extra product master solely because a second barcode format exists, not confirming that assuming a supplier contract alone configures quantity validation in the item master.

B:

Equating a valid item identifier with a valid packaging-unit conversion. This assesses equating a valid item identifier with a valid packaging-unit conversion; it does not determine the reported condition—a distributor wants a minimum purchasing quantity of fifty and purchase multiples of ten.

D:

Using product marketing categories as if they automatically drove warehouse filtering. The case-specific requirement is confirming that assuming a supplier contract alone configures quantity validation in the item master, which that option does not establish.

Question 172

While diagnosing the following exception — An employee is transferred from packing to cycle counting and the assigned mobile menu still exposes old tasks — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Removing required batch or quantity validation solely to make screens shorter.
  2. Retaining broad historical worker permissions indefinitely after a role change.
  3. Using a shared device to post to any warehouse without validating selected context.
  4. Using unrestricted administrator menus for daily handheld warehouse work.

Explanation

Correct Answer

B:

The unsafe assumption is: Retaining broad historical worker permissions indefinitely after a role change. In the scenario, An employee is transferred from packing to cycle counting and the assigned mobile menu still exposes old tasks. The appropriate controlled response is Reassign the worker to an approved cycle-counting menu and revoke no-longer-needed access. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Removing required batch or quantity validation solely to make screens shorter. The check concerns removing required batch or quantity validation solely to make screens shorter, not confirming that retaining broad historical worker permissions indefinitely after a role change.

C:

Using a shared device to post to any warehouse without validating selected context. This assesses using a shared device to post to any warehouse without validating selected context; it does not determine the reported condition—while diagnosing the following exception — An employee is transferred from packing to cycle counting and the assigned mobile menu still exposes old tasks.

D:

Using unrestricted administrator menus for daily handheld warehouse work. The case-specific requirement is confirming that retaining broad historical worker permissions indefinitely after a role change, which that option does not establish.

Question 173

The consultant reviews potential shortcuts after learning that a maintenance plan should create weekly inspection work but no orders appear when the due date passes. Which belief must be challenged to avoid a misleading or uncontrolled result?

  1. Overwriting the completed inspection to disguise an unresolved fault.
  2. Posting maintenance consumption before a request has become an approved work order.
  3. Assuming entering an inspection interval automatically runs the scheduling batch.
  4. Charging all labor to a generic plant overhead account without asset attribution.

Explanation

Correct Answer

C:

The unsafe assumption is: Assuming entering an inspection interval automatically runs the scheduling batch. In the scenario, A maintenance plan should create weekly inspection work but no orders appear when the due date passes. The appropriate controlled response is Correct the maintenance plan execution and generate scheduled due work orders. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Overwriting the completed inspection to disguise an unresolved fault. The check concerns overwriting the completed inspection to disguise an unresolved fault, not confirming that assuming entering an inspection interval automatically runs the scheduling batch.

B:

Posting maintenance consumption before a request has become an approved work order. This assesses posting maintenance consumption before a request has become an approved work order; it does not determine the reported condition—the consultant reviews potential shortcuts after learning that a maintenance plan should create weekly inspection work but no orders appear when the due.

D:

Charging all labor to a generic plant overhead account without asset attribution. The case-specific requirement is confirming that assuming entering an inspection interval automatically runs the scheduling batch, which that option does not establish.

Question 174

A functional consultant has confirmed the following condition: A business needs multiple shipments grouped in a wave for batch release and picking. The relevant check is: Inspect wave template eligibility, shipment grouping, and release criteria. What should the team implement or process?

  1. Configure an outbound wave template for appropriate sales order workloads.
  2. Configure temperature-appropriate locations and location directives for receipt work.
  3. Narrow location directives to eligible stock and approved outbound zones.
  4. Configure a work template representing the approved pick and put workflow.

Explanation

Correct Answer

A:

The supported next step is: Configure an outbound wave template for appropriate sales order workloads. The observed requirement is A business needs multiple shipments grouped in a wave for batch release and picking. The diagnostic check was: Inspect wave template eligibility, shipment grouping, and release criteria. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Configure temperature-appropriate locations and location directives for receipt work. That alternative is checked by reviewing location zones, profiles, product handling constraints, and put-away directive queries; the actual requirement instead calls for inspecting wave template eligibility, shipment grouping, and release criteria.

C:

Narrow location directives to eligible stock and approved outbound zones. Inspecting location directive queries, inventory status, and location selection conditions tests that mechanism, but it does not establish the reported condition—a business needs multiple shipments grouped in a wave for batch release and picking.

D:

Configure a work template representing the approved pick and put workflow. Its technical evidence involves reviewing work template steps, work classes, and processing priorities. For the stated question, inspecting wave template eligibility, shipment grouping, and release criteria is the more relevant test.

Question 175

The current Dynamics 365 process fails to meet this requirement: A repair department receives a rejected returned item and needs to record the test failure separately from its customer credit. The investigation is complete. Which operational change provides the right fix?

  1. Create and process the authorized quarantine handling, maintaining supplier ownership where applicable.
  2. Reuse common test definitions where appropriate but maintain correct item-specific limits and associations.
  3. Process the applicable quality order or nonconformance linked to the return.
  4. Configure appropriate quality tests and acceptance limits before processing quality orders.

Explanation

Correct Answer

C:

The supported next step is: Process the applicable quality order or nonconformance linked to the return. The observed requirement is A repair department receives a rejected returned item and needs to record the test failure separately from its customer credit. The diagnostic check was: Inspect return order disposition and associated quality testing requirements. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Create and process the authorized quarantine handling, maintaining supplier ownership where applicable. That alternative is checked by verifying which quarantine process and inventory location applies to the affected stock; the actual requirement instead calls for inspecting return order disposition and associated quality testing requirements.

B:

Reuse common test definitions where appropriate but maintain correct item-specific limits and associations. Comparing shared test definitions with item-specific acceptance requirements tests that mechanism, but it does not establish the reported condition—a repair department receives a rejected returned item and needs to record the test failure separately from its customer credit.

D:

Configure appropriate quality tests and acceptance limits before processing quality orders. Its technical evidence involves checking test definitions, instruments, quality groups, and acceptance criteria for the item. For the stated question, inspecting return order disposition and associated quality testing requirements is the more relevant test.

Question 176

While diagnosing the following exception — A mobile receiver scans inbound license plates but every receipt is assigned to a generic bin because put-away work is never created — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Creating a customer sales invoice as a replacement for inbound load planning.
  2. Assuming a scanned receipt automatically completes the entire put-away process.
  3. Ignoring delivery dates to combine loads solely because customers share a city.
  4. Assuming each sales line is one physical carton regardless of item dimensions.

Explanation

Correct Answer

B:

The unsafe assumption is: Assuming a scanned receipt automatically completes the entire put-away process. In the scenario, A mobile receiver scans inbound license plates but every receipt is assigned to a generic bin because put-away work is never created. The appropriate controlled response is Configure inbound mobile receipt followed by the intended put-away work flow. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Creating a customer sales invoice as a replacement for inbound load planning. The check concerns creating a customer sales invoice as a replacement for inbound load planning, not confirming that assuming a scanned receipt automatically completes the entire put-away process.

C:

Ignoring delivery dates to combine loads solely because customers share a city. This assesses ignoring delivery dates to combine loads solely because customers share a city; it does not determine the reported condition—while diagnosing the following exception — A mobile receiver scans inbound license plates but every receipt is assigned to a generic bin because put-away.

D:

Assuming each sales line is one physical carton regardless of item dimensions. The case-specific requirement is confirming that assuming a scanned receipt automatically completes the entire put-away process, which that option does not establish.

Question 177

A functional consultant has confirmed the following condition: A sales order has several shipments with different promised dates but dispatch planning combines them into one late load. The relevant check is: Review outbound load grouping, delivery deadlines, and route capacity constraints. What should the team implement or process?

  1. Coordinate the assigned carrier, arrival slot, and warehouse receiving load plan.
  2. Configure route/rate engines with suitable cost and service constraints.
  3. Split or plan the loads to honor eligible shipments and delivery commitments.
  4. Reconcile freight charges and process authorized variance adjustments.

Explanation

Correct Answer

C:

The supported next step is: Split or plan the loads to honor eligible shipments and delivery commitments. The observed requirement is A sales order has several shipments with different promised dates but dispatch planning combines them into one late load. The diagnostic check was: Review outbound load grouping, delivery deadlines, and route capacity constraints. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Coordinate the assigned carrier, arrival slot, and warehouse receiving load plan. That alternative can be assessed by checking dock appointment and transportation plan against the container's voyage milestones; the actual requirement instead calls for reviewing outbound load grouping, delivery deadlines, and routing capacity constraints.

B:

Configure route/rate engines with suitable cost and service constraints. Inspecting available routing and rating engines and their selection rules tests that mechanism, but it does not establish the reported condition—a sales order has several shipments with different promised dates but dispatch planning combines them into one late load.

D:

Reconcile freight charges and process authorized variance adjustments. Its technical evidence involves comparing the freight bill, actual carrier invoice, rated charge, and tolerance settings. For the stated question, reviewing outbound load grouping, delivery deadlines, and routing capacity constraints is the more relevant test.

Question 178

A project team must resolve this supply-chain problem: A repair organization needs two service parts with identical descriptions but different product identifiers and independent inventories. After completing this check — Compare shared identifiers, released product numbers, and transaction references — which supported action is best suited to the case?

  1. Define distinct products when inventory, accounting, or lifecycle treatment truly differs.
  2. Create a product-specific approved BOM rather than reuse a structurally incompatible prototype list.
  3. Release the shared product into the receiving legal entity and complete its company-specific defaults.
  4. Use lifecycle-based operational restrictions without deleting historical product and inventory records.

Explanation

Correct Answer

A:

The supported next step is: Define distinct products when inventory, accounting, or lifecycle treatment truly differs. The observed requirement is A repair organization needs two service parts with identical descriptions but different product identifiers and independent inventories. The diagnostic check was: Compare shared identifiers, released product numbers, and transaction references. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Create a product-specific approved BOM rather than reuse a structurally incompatible prototype list. That alternative is checked by inspecting which BOM relates to each released product and whether components meet the approved revision; the actual requirement instead calls for comparing shared identifiers, released product numbers, and transaction references.

C:

Release the shared product into the receiving legal entity and complete its company-specific defaults. Comparing the shared product definition with the released product record in the target legal entity tests that mechanism, but it does not establish the reported condition—a repair organization needs two service parts with identical descriptions but different product identifiers and independent inventories.

D:

Use lifecycle-based operational restrictions without deleting historical product and inventory records. Its technical evidence involves reviewing allowed product lifecycle transitions and whether open transactions still exist. For the stated question, comparing shared identifiers, released product numbers, and transaction references is the more relevant test.

Question 179

The current Dynamics 365 process fails to meet this requirement: A team needs to correct the financial value of an item after a costing review without fabricating a physical receipt. The investigation is complete. Which operational change provides the right fix?

  1. Assign an appropriate batch disposition code and enforce its permitted transaction behavior.
  2. Configure and run an inventory ABC classification report using the intended valuation basis.
  3. Apply manual inventory blocking to the affected stock and release it only after authorization.
  4. Use the appropriate inventory valuation adjustment workflow with approval and traceability.

Explanation

Correct Answer

D:

The supported next step is: Use the appropriate inventory valuation adjustment workflow with approval and traceability. The observed requirement is A team needs to correct the financial value of an item after a costing review without fabricating a physical receipt. The diagnostic check was: Distinguish quantity-only differences from inventory valuation adjustments and accounting period limits. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Assign an appropriate batch disposition code and enforce its permitted transaction behavior. That alternative is checked by inspecting batch disposition codes and allowed transaction use for restricted batches; the actual requirement instead calls for distinguishing quantity-only differences from inventory valuation adjustments and accounting period limits.

B:

Configure and run an inventory ABC classification report using the intended valuation basis. Identifying the item value and consumption criteria required for ABC classification tests that mechanism, but it does not establish the reported condition—a team needs to correct the financial value of an item after a costing review without fabricating a physical receipt.

C:

Apply manual inventory blocking to the affected stock and release it only after authorization. Its technical evidence involves checking inventory blocking and disposition controls for the exact batch and site. For the stated question, distinguishing quantity-only differences from inventory valuation adjustments and accounting period limits is the more relevant test.

Question 180

A project team must resolve this supply-chain problem: A delayed purchase is due shortly after a sales requirement and the team wants to understand reuse of the late receipt. After completing this check — Review negative days, procurement lead time, and the existing purchase receipt schedule — which supported action is best suited to the case?

  1. Configure a supported negative-days policy for considering late supply against demand.
  2. Enable appropriate advance action messages and examine planned supply dates.
  3. Configure the applicable planning safety margins to protect intended lead-time buffers.
  4. Maintain separate master plans for operational execution and what-if analysis.

Explanation

Correct Answer

A:

The supported next step is: Configure a supported negative-days policy for considering late supply against demand. The observed requirement is A delayed purchase is due shortly after a sales requirement and the team wants to understand reuse of the late receipt. The diagnostic check was: Review negative days, procurement lead time, and the existing purchase receipt schedule. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Enable appropriate advance action messages and examine planned supply dates. That alternative is checked by inspecting action message settings and the relevant coverage group time fences; the actual requirement instead calls for reviewing negative days, procurement lead time, and the existing purchase receipt schedule.

C:

Configure the applicable planning safety margins to protect intended lead-time buffers. Inspecting receipt margin, issue margin, and reordering margin versus stated process timing tests that mechanism, but it does not establish the reported condition—a delayed purchase is due shortly after a sales requirement and the team wants to understand reuse of the late receipt.

D:

Maintain separate master plans for operational execution and what-if analysis. Its technical evidence involves inspecting master plan definitions, scheduling parameters, and consumption of forecast data. For the stated question, reviewing negative days, procurement lead time, and the existing purchase receipt schedule is the more relevant test.