mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 13

Question 120

A project team must resolve this supply-chain problem: A retailer wants a shirt product master with seasonal colors introduced gradually while old variants remain orderable. After completing this check — Compare active variant records, lifecycle settings, and available product dimension values — which supported action is best suited to the case?

  1. Apply a governed product template at creation and verify company-specific settings separately.
  2. Add and release only approved new variants while preserving existing orderable combinations.
  3. Release the shared product into the receiving legal entity and complete its company-specific defaults.
  4. Define distinct products when inventory, accounting, or lifecycle treatment truly differs.

Explanation

Correct Answer

B:

The supported next step is: Add and release only approved new variants while preserving existing orderable combinations. The observed requirement is A retailer wants a shirt product master with seasonal colors introduced gradually while old variants remain orderable. The diagnostic check was: Compare active variant records, lifecycle settings, and available product dimension values. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Apply a governed product template at creation and verify company-specific settings separately. That alternative is checked by reviewing which reusable fields belong to a product template versus legal-entity inventory defaults; the actual requirement instead calls for comparing active variant records, lifecycle settings, and available product dimension values.

C:

Release the shared product into the receiving legal entity and complete its company-specific defaults. Comparing the shared product definition with the released product record in the target legal entity tests that mechanism, but it does not establish the reported condition—a retailer wants a shirt product master with seasonal colors introduced gradually while old variants remain orderable.

D:

Define distinct products when inventory, accounting, or lifecycle treatment truly differs. Its technical evidence involves comparing shared identifiers, released product numbers, and transaction references. For the stated question, comparing active variant records, lifecycle settings, and available product dimension values is the more relevant test.

Question 121

A project team is about to close this Dynamics 365 issue: A supplier delivery is delayed and planners need a clear record of which downstream sales orders might be affected. Which assumption would be particularly unsafe for this resolution?

  1. Bulk-firming every system-generated order because the plan run succeeded.
  2. Treating a delay message as an automatic final customer delivery promise.
  3. Assuming calculating a safety stock journal proposal immediately changes live item coverage.
  4. Assuming a planned purchase order already constitutes a supplier contract.

Explanation

Correct Answer

B:

The unsafe assumption is: Treating a delay message as an automatic final customer delivery promise. In the scenario, A supplier delivery is delayed and planners need a clear record of which downstream sales orders might be affected. The appropriate controlled response is Analyze delay messages and affected net requirements before changing promised delivery dates. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Bulk-firming every system-generated order because the plan run succeeded. The check concerns bulk-firming every system-generated order because the plan run succeeded, not confirming that treating a delay message as an automatic final customer delivery promise.

C:

Assuming calculating a safety stock journal proposal immediately changes live item coverage. This assesses assuming calculating a safety stock journal proposal immediately changes live item coverage; it does not determine the reported condition—a supplier delivery is delayed and planners need a clear record of which downstream sales orders might be affected.

D:

Assuming a planned purchase order already constitutes a supplier contract. The case-specific requirement is confirming that treating a delay message as an automatic final customer delivery promise, which that option does not establish.

Question 122

A functional consultant has confirmed the following condition: A packer reports carton capacity errors when the order includes large products with missing dimensional data. The relevant check is: Check product packing dimensions and configured container or carton restrictions. What should the team implement or process?

  1. Create a location hierarchy with valid location formats and appropriate storage profiles.
  2. Maintain accurate packing dimensions and applicable packaging rules.
  3. Define the relevant GS1 label segments and valid barcode formatting.
  4. Configure the appropriate load template and shipment grouping criteria.

Explanation

Correct Answer

B:

The supported next step is: Maintain accurate packing dimensions and applicable packaging rules. The observed requirement is A packer reports carton capacity errors when the order includes large products with missing dimensional data. The diagnostic check was: Check product packing dimensions and configured container or carton restrictions. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Create a location hierarchy with valid location formats and appropriate storage profiles. That alternative is checked by inspecting site, warehouse, location profile, location format, and location type setup; the actual requirement instead calls for checking product packing dimensions and configured container or carton restrictions.

C:

Define the relevant GS1 label segments and valid barcode formatting. Reviewing GS1 label segments and the fields sourced from product and tracking data tests that mechanism, but it does not establish the reported condition—a packer reports carton capacity errors when the order includes large products with missing dimensional data.

D:

Configure the appropriate load template and shipment grouping criteria. Its technical evidence involves comparing the role of load templates with wave and work templates. For the stated question, checking product packing dimensions and configured container or carton restrictions is the more relevant test.

Question 123

A project team must resolve this supply-chain problem: A catalog offers a master shirt in size and color combinations, with inventory stored across several warehouses. After completing this check — Separate product variant dimensions from physical storage dimensions in the item setup — which supported action is best suited to the case?

  1. Assign a compatible tracking dimension group and serial registration workflow.
  2. Configure product dimensions for size and color and storage dimensions for warehouses.
  3. Enable the appropriate batch tracking dimension and enforce capture in relevant flows.
  4. Plan a controlled inventory migration or item redesign when changing transacted dimension structures.

Explanation

Correct Answer

B:

The supported next step is: Configure product dimensions for size and color and storage dimensions for warehouses. The observed requirement is A catalog offers a master shirt in size and color combinations, with inventory stored across several warehouses. The diagnostic check was: Separate product variant dimensions from physical storage dimensions in the item setup. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Assign a compatible tracking dimension group and serial registration workflow. That alternative is checked by confirming that examine serial number tracking requirements across receiving, issue, and returns; the actual requirement instead calls for separating product variant dimensions from physical storage dimensions in the item setup.

C:

Enable the appropriate batch tracking dimension and enforce capture in relevant flows. determining batch tracking requirements and the item's tracking dimension group tests that mechanism, but it does not establish the reported condition—a catalog offers a master shirt in size and color combinations, with inventory stored across several warehouses.

D:

Plan a controlled inventory migration or item redesign when changing transacted dimension structures. Its technical evidence involves comparing existing on-hand and open transactions with the requested storage dimension change. For the stated question, separating product variant dimensions from physical storage dimensions in the item setup is the more relevant test.

Question 124

A project team is about to close this Dynamics 365 issue: A manufacturer sells one item in multiple colors but tracking dimension reports mistakenly show every color as a lot. Which assumption would be particularly unsafe for this resolution?

  1. Tracking only the warehouse site when individual units require identification.
  2. Using identical inventory model settings for services and physical stock without review.
  3. Making each warehouse a product variant instead of an inventory storage dimension.
  4. Treating a style color as a physical batch tracking identifier.

Explanation

Correct Answer

D:

The unsafe assumption is: Treating a style color as a physical batch tracking identifier. In the scenario, A manufacturer sells one item in multiple colors but tracking dimension reports mistakenly show every color as a lot. The appropriate controlled response is Keep color under product variants while using tracking dimensions only for actual traceability. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Tracking only the warehouse site when individual units require identification. The check concerns tracking only the warehouse site when individual units require identification, not confirming that treating a style color as a physical batch tracking identifier.

B:

Using identical inventory model settings for services and physical stock without review. This assesses using identical inventory model settings for services and physical stock without review; it does not determine the reported condition—a manufacturer sells one item in multiple colors but tracking dimension reports mistakenly show every color as a lot.

C:

Making each warehouse a product variant instead of an inventory storage dimension. The case-specific requirement is confirming that treating a style color as a physical batch tracking identifier, which that option does not establish.

Question 125

A project team must resolve this supply-chain problem: A multichannel retailer imports two different barcode schemes for the same physical item. After completing this check — Compare supported item barcode associations and scanning contexts across channels — which supported action is best suited to the case?

  1. Align barcode associations and permitted picking units in the supported mobile flow.
  2. Maintain valid barcodes for the appropriate product and unit or variant contexts.
  3. Correct the conversion ratio and test open procurement flows before applying broadly.
  4. Maintain scoped default order rules for the relevant sites and order types.

Explanation

Correct Answer

B:

The supported next step is: Maintain valid barcodes for the appropriate product and unit or variant contexts. The observed requirement is A multichannel retailer imports two different barcode schemes for the same physical item. The diagnostic check was: Compare supported item barcode associations and scanning contexts across channels. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Align barcode associations and permitted picking units in the supported mobile flow. That alternative is checked by reviewing item barcode unit mappings and warehouse unit sequence group configuration; the actual requirement instead calls for comparing supported item barcode associations and scanning contexts across channels.

C:

Correct the conversion ratio and test open procurement flows before applying broadly. Inspecting each product unit conversion and unit sequence assignment, not just invoice quantities tests that mechanism, but it does not establish the reported condition—a multichannel retailer imports two different barcode schemes for the same physical item.

D:

Maintain scoped default order rules for the relevant sites and order types. Its technical evidence involves inspecting the item default order settings scope by site and purchase or sales context. For the stated question, comparing supported item barcode associations and scanning contexts across channels is the more relevant test.

Question 126

A project team is about to close this Dynamics 365 issue: A stock item is switched to standard cost while finance has not approved the opening standard cost. Which assumption would be particularly unsafe for this resolution?

  1. Assuming the last entered agreement always wins independent of match conditions.
  2. Entering a universal base sales price and expecting group-specific pricing automatically.
  3. Applying a plant-specific standard cost as if it were universal to every location.
  4. Using a draft cost record to process live receipts before finance approval.

Explanation

Correct Answer

D:

The unsafe assumption is: Using a draft cost record to process live receipts before finance approval. In the scenario, A stock item is switched to standard cost while finance has not approved the opening standard cost. The appropriate controlled response is Complete approved standard-cost setup and controlled cutover before posting new transactions. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Assuming the last entered agreement always wins independent of match conditions. The check concerns assuming the last entered agreement always wins independent of match conditions, not confirming that using a draft cost record to process live receipts before finance approval.

B:

Entering a universal base sales price and expecting group-specific pricing automatically. This assesses entering a universal base sales price and expecting group-specific pricing automatically; it does not determine the reported condition—a stock item is switched to standard cost while finance has not approved the opening standard cost.

C:

Applying a plant-specific standard cost as if it were universal to every location. The case-specific requirement is confirming that using a draft cost record to process live receipts before finance approval, which that option does not establish.

Question 127

A functional consultant has confirmed the following condition: A warehouse plan calls for large pallets in bulk zones and small parts in shelving zones. The relevant check is: Compare location profile capacity, location types, and product storage characteristics. What should the team implement or process?

  1. Configure and apply inventory statuses with the intended blocking and release rules.
  2. Configure temperature-appropriate locations and location directives for receipt work.
  3. Assign appropriate location profiles and capacity rules to the different zones.
  4. Configure an outbound wave template for appropriate sales order workloads.

Explanation

Correct Answer

C:

The supported next step is: Assign appropriate location profiles and capacity rules to the different zones. The observed requirement is A warehouse plan calls for large pallets in bulk zones and small parts in shelving zones. The diagnostic check was: Compare location profile capacity, location types, and product storage characteristics. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure and apply inventory statuses with the intended blocking and release rules. That alternative is checked by inspecting inventory status setup and whether statuses allow reservation and work allocation; the actual requirement instead calls for comparing location profile capacity, location types, and product storage characteristics.

B:

Configure temperature-appropriate locations and location directives for receipt work. Reviewing location zones, profiles, product handling constraints, and put-away directive queries tests that mechanism, but it does not establish the reported condition—a warehouse plan calls for large pallets in bulk zones and small parts in shelving zones.

D:

Configure an outbound wave template for appropriate sales order workloads. Its technical evidence involves inspecting wave template eligibility, shipment grouping, and release criteria. For the stated question, comparing location profile capacity, location types, and product storage characteristics is the more relevant test.

Question 128

While diagnosing the following exception — A retailer adds a new outbound dock but shipment work still routes all picked cartons to the old staging lane — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Changing item default order quantity to fix warehouse staging instructions.
  2. Assuming a physical location's availability guarantees its inventory is released.
  3. Using financial item weight as a substitute for physical length, width, and height.
  4. Assuming a work template determines truck load grouping and freight characteristics.

Explanation

Correct Answer

A:

The unsafe assumption is: Changing item default order quantity to fix warehouse staging instructions. In the scenario, A retailer adds a new outbound dock but shipment work still routes all picked cartons to the old staging lane. The appropriate controlled response is Update outbound work routing for the approved dock and staging area. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Assuming a physical location's availability guarantees its inventory is released. The check concerns assuming a physical location's availability guarantees its inventory is released, not confirming that changing item default order quantity to fix warehouse staging instructions.

C:

Using financial item weight as a substitute for physical length, width, and height. This assesses using financial item weight as a substitute for physical length, width, and height; it does not determine the reported condition—while diagnosing the following exception — A retailer adds a new outbound dock but shipment work still routes all picked cartons to the old staging lane —.

D:

Assuming a work template determines truck load grouping and freight characteristics. The case-specific requirement is confirming that changing item default order quantity to fix warehouse staging instructions, which that option does not establish.

Question 129

The current Dynamics 365 process fails to meet this requirement: A service planner needs to view labor shortages across all open maintenance tasks before committing dates. The investigation is complete. Which operational change provides the right fix?

  1. Run capacity planning and adjust the feasible work order schedule.
  2. Register and post the authorized spare-parts consumption against the work order.
  3. Use the appropriate authorized asset loan or inventory issue process and document the expected return.
  4. Log the request against the applicable functional location and refine the asset after investigation.

Explanation

Correct Answer

A:

The supported next step is: Run capacity planning and adjust the feasible work order schedule. The observed requirement is A service planner needs to view labor shortages across all open maintenance tasks before committing dates. The diagnostic check was: Compare work order scheduling demand with resources, calendars, and required skills. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Register and post the authorized spare-parts consumption against the work order. That alternative can be assessed by checking maintenance item consumption lines and whether they have been posted; the actual requirement instead calls for comparing work order scheduling demand with resources, calendars, and required skills.

C:

Use the appropriate authorized asset loan or inventory issue process and document the expected return. Checking whether the process is an asset loan, a stocked item issue, or a permanent asset transfer tests that mechanism, but it does not establish the reported condition—a service planner needs to view labor shortages across all open maintenance tasks before committing dates.

D:

Log the request against the applicable functional location and refine the asset after investigation. Its technical evidence involves reviewing asset and functional location relationships used in maintenance requests. For the stated question, comparing work order scheduling demand with resources, calendars, and required skills is the more relevant test.

Question 130

A project team must resolve this supply-chain problem: A retailer changes an item's storage group after transactions and discovers warehouse reports no longer reconcile. After completing this check — Compare existing on-hand and open transactions with the requested storage dimension change — which supported action is best suited to the case?

  1. Configure an appropriate storage dimension group with the required location hierarchy.
  2. Configure unit sequence and valid unit conversions for pallets, cases, and eaches.
  3. Plan a controlled inventory migration or item redesign when changing transacted dimension structures.
  4. Assign a compatible tracking dimension group and serial registration workflow.

Explanation

Correct Answer

C:

The supported next step is: Plan a controlled inventory migration or item redesign when changing transacted dimension structures. The observed requirement is A retailer changes an item's storage group after transactions and discovers warehouse reports no longer reconcile. The diagnostic check was: Compare existing on-hand and open transactions with the requested storage dimension change. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure an appropriate storage dimension group with the required location hierarchy. That alternative is checked by inspecting the storage dimension group and which dimensions are enabled for transactions; the actual requirement instead calls for comparing existing on-hand and open transactions with the requested storage dimension change.

B:

Configure unit sequence and valid unit conversions for pallets, cases, and eaches. Reviewing the unit sequence group and conversion definitions for purchase, storage, and pick units tests that mechanism, but it does not establish the reported condition—a retailer changes an item's storage group after transactions and discovers warehouse reports no longer reconcile.

D:

Assign a compatible tracking dimension group and serial registration workflow. Its technical evidence involves confirming that examine serial number tracking requirements across receiving, issue, and returns. For the stated question, comparing existing on-hand and open transactions with the requested storage dimension change is the more relevant test.