mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 87

Question 860

A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. Which shortcut would be most likely to undermine this objective?

  1. Disable interface telemetry to suppress alerts caused by rising packet errors.
  2. Raise the anomaly threshold to infinity because the probe currently selects unrelated devices.
  3. Disable all analytics probes because several symptoms share the same source device.
  4. Trigger incidents from a single unvalidated stale sample while discarding the source telemetry.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: trigger incidents from a single unvalidated stale sample while discarding the source telemetry. It violates the principle that IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly. An appropriate alternative is to configure the supported aggregation and alert conditions with documented baseline behavior.

Incorrect Answers

A:

The option “Disable interface telemetry to suppress alerts caused by rising packet errors” is useful in a different setting: A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. The case being tested is: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly. The directly relevant unsafe shortcut is “Trigger incidents from a single unvalidated stale sample while discarding the source telemetry”.

B:

“Raise the anomaly threshold to infinity because the probe currently selects unrelated devices” is relevant to a different condition: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. The stated question instead concerns: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly. The directly relevant unsafe shortcut is “Trigger incidents from a single unvalidated stale sample while discarding the source telemetry”.

C:

That choice—“Disable all analytics probes because several symptoms share the same source device”—addresses this other problem: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Here the scenario is: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly. The directly relevant unsafe shortcut is “Trigger incidents from a single unvalidated stale sample while discarding the source telemetry”.

Question 861

A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. Which controlled change best addresses the described requirement?

  1. Select a compatible reference design and align planned spine, leaf and rack relationships before deployment.
  2. Reserve supported spine and rack capacity for the forecast growth while tracking oversubscription targets.
  3. Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints.
  4. Extend the approved blueprint design to include appropriate border connectivity and associated resources.

Explanation

Correct Answer

C:

This action addresses the stated defect: choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints. The underlying constraint is that reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. Verify rather than assume success: prove design-stage topology and resource validation before committing to hardware procurement.

Incorrect Answers

A:

“Select a compatible reference design and align planned spine, leaf and rack relationships before deployment” is associated with a distinct issue: An architect wants consistent rack scale-out using a reference design rather than independently inventing each fabric topology. By contrast, the actual problem is: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints. The most relevant correction is “Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints”.

B:

The option “Reserve supported spine and rack capacity for the forecast growth while tracking oversubscription targets” is useful in a different setting: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. The case being tested is: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints. The most relevant correction is “Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints”.

D:

That choice—“Extend the approved blueprint design to include appropriate border connectivity and associated resources”—addresses this other problem: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. Here the scenario is: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints. The most relevant correction is “Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints”.

Question 862

A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Which controlled change best addresses the described requirement?

  1. Create or select the approved reusable rack type and instantiate the rack consistently.
  2. Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate.
  3. Expand spine capacity or rescope rack additions under a supported topology design.
  4. Correct the cable plan to use approved physically independent spine paths.

Explanation

Correct Answer

C:

This action addresses the stated defect: expand spine capacity or rescope rack additions under a supported topology design. The underlying constraint is that total spine capacity includes available physical ports and supported link-speed and topology constraints. Verify rather than assume success: prove free compatible spine ports remain after allocating every forecast uplink.

Incorrect Answers

A:

That choice—“Create or select the approved reusable rack type and instantiate the rack consistently”—addresses this other problem: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. Here the scenario is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Expand spine capacity or rescope rack additions under a supported topology design. The most relevant correction is “Expand spine capacity or rescope rack additions under a supported topology design”.

B:

“Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate” is associated with a distinct issue: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. By contrast, the actual problem is: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Expand spine capacity or rescope rack additions under a supported topology design. The most relevant correction is “Expand spine capacity or rescope rack additions under a supported topology design”.

D:

“Correct the cable plan to use approved physically independent spine paths” is relevant to a different condition: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The stated question instead concerns: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Expand spine capacity or rescope rack additions under a supported topology design. The most relevant correction is “Expand spine capacity or rescope rack additions under a supported topology design”.

Question 863

A template identifies uplink ports by logical role but a new hardware SKU has different port naming. Which shortcut would be most likely to undermine this objective?

  1. Force a 100G logical port onto unsupported breakout lanes and rely on autonegotiation to fix the design.
  2. Copy port names from a different hardware platform without checking physical assignments.
  3. Disable interface conflict checks rather than correcting the physical resource plan.
  4. Assume the logical device automatically creates additional physical interfaces on undersized hardware.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: copy port names from a different hardware platform without checking physical assignments. It violates the principle that logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. An appropriate alternative is to apply a supported interface map that binds each logical fabric role to the intended physical port.

Incorrect Answers

A:

“Force a 100G logical port onto unsupported breakout lanes and rely on autonegotiation to fix the design” is relevant to a different condition: An Apstra design refuses a proposed uplink because its interface map does not match hardware port mode. The stated question instead concerns: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The directly relevant unsafe shortcut is “Copy port names from a different hardware platform without checking physical assignments”.

C:

“Disable interface conflict checks rather than correcting the physical resource plan” is associated with a distinct issue: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. By contrast, the actual problem is: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The directly relevant unsafe shortcut is “Copy port names from a different hardware platform without checking physical assignments”.

D:

The option “Assume the logical device automatically creates additional physical interfaces on undersized hardware” is useful in a different setting: A rack template chooses a logical device with insufficient server ports for its planned generic systems. The case being tested is: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The directly relevant unsafe shortcut is “Copy port names from a different hardware platform without checking physical assignments”.

Question 864

A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. Which controlled change best addresses the described requirement?

  1. Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes.
  2. Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability.
  3. Correct the approved virtual-network attachment and associated host-facing VLAN primitives.
  4. Create or correct a scoped connectivity template and routing policy for the authorized VRF.

Explanation

Correct Answer

B:

This action addresses the stated defect: apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability. The underlying constraint is that DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites. Verify rather than assume success: verify sanctioned intersite application flows and absence of unauthorized tenant route propagation.

Incorrect Answers

A:

The option “Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes” is useful in a different setting: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. The case being tested is: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The governing requirement is to apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability. The most relevant correction is “Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability”.

C:

That choice—“Correct the approved virtual-network attachment and associated host-facing VLAN primitives”—addresses this other problem: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Here the scenario is: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The governing requirement is to apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability. The most relevant correction is “Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability”.

D:

“Create or correct a scoped connectivity template and routing policy for the authorized VRF” is associated with a distinct issue: A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. By contrast, the actual problem is: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The governing requirement is to apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability. The most relevant correction is “Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability”.

Question 865

A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. Which shortcut would be most likely to undermine this objective?

  1. Disable interface conflict checks rather than correcting the physical resource plan.
  2. Force a 100G logical port onto unsupported breakout lanes and rely on autonegotiation to fix the design.
  3. Copy port names from a different hardware platform without checking physical assignments.
  4. Assume future leaf switches can be attached even after every suitable spine port is consumed.

Explanation

Correct Answer

A:

This is the unsafe shortcut to avoid: disable interface conflict checks rather than correcting the physical resource plan. It violates the principle that a physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint. An appropriate alternative is to reallocate the conflicting interface roles to separate supported physical ports.

Incorrect Answers

B:

The option “Force a 100G logical port onto unsupported breakout lanes and rely on autonegotiation to fix the design” is useful in a different setting: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. The case being tested is: A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. A physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint. The directly relevant unsafe shortcut is “Disable interface conflict checks rather than correcting the physical resource plan”.

C:

“Copy port names from a different hardware platform without checking physical assignments” is relevant to a different condition: A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. The stated question instead concerns: A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. A physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint. The directly relevant unsafe shortcut is “Disable interface conflict checks rather than correcting the physical resource plan”.

D:

That choice—“Assume future leaf switches can be attached even after every suitable spine port is consumed”—addresses this other problem: A site plans to double leaf count next year while reserving no interface or port-speed headroom. Here the scenario is: A change adds a server port to a device profile but accidentally reserves the same port for spine connectivity. A physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint. The directly relevant unsafe shortcut is “Disable interface conflict checks rather than correcting the physical resource plan”.

Question 866

An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. Which design or operational principle best explains this behavior?

  1. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path.
  2. A distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices.
  3. EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements.
  4. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability.

Explanation

Correct Answer

D:

edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. Here, an architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. A useful discriminating check is to inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements.

Incorrect Answers

A:

That choice—“EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path”—addresses this other problem: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. Here the scenario is: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. The controlling principle is “Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability”.

B:

“A distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices” is associated with a distinct issue: An anycast gateway design uses inconsistent SVI gateway parameters on two participating leafs. By contrast, the actual problem is: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. The controlling principle is “Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability”.

C:

The option “EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements” is useful in a different setting: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. The case being tested is: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. The controlling principle is “Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability”.

Question 867

A deployment team duplicates a device-system ID when registering two new leaf switches. Which initial check would most directly distinguish the likely cause?

  1. Review device replacement workflow, old/new system identifiers and required port/profile compatibility.
  2. Inspect the device-agent state, management authentication and discovered system ID before allocation.
  3. Compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices.
  4. Inspect pending differences and deploy status from the blueprint UI before accepting the change.

Explanation

Correct Answer

C:

This checks the relevant evidence first: compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices. The underlying concept is that unique accurate managed device identities are required for safe inventory and blueprint allocation. After confirming the finding, a controlled remediation is to correct the duplicate device registration and assign each real device its own validated identity.

Incorrect Answers

A:

“Review device replacement workflow, old/new system identifiers and required port/profile compatibility” is relevant to a different condition: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. The stated question instead concerns: A deployment team duplicates a device-system ID when registering two new leaf switches. The relevant inspection is: Compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices. The most discriminating first check is “Compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices”.

B:

That choice—“Inspect the device-agent state, management authentication and discovered system ID before allocation”—addresses this other problem: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. Here the scenario is: A deployment team duplicates a device-system ID when registering two new leaf switches. The relevant inspection is: Compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices. The most discriminating first check is “Compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices”.

D:

The option “Inspect pending differences and deploy status from the blueprint UI before accepting the change” is useful in a different setting: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. The case being tested is: A deployment team duplicates a device-system ID when registering two new leaf switches. The relevant inspection is: Compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices. The most discriminating first check is “Compare hardware identifiers, managed system IDs and blueprint allocation entries for the affected devices”.

Question 868

A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. Which evidence most directly verifies the intended network outcome?

  1. Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated.
  2. Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF.
  3. Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs.
  4. Verify the intended external session and imported/exported prefixes appear only in the proper tenant routing context.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF. The decisive investigation is to inspect virtual-network membership and routing-zone assignments for the application segments. The governing principle is that a routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context.

Incorrect Answers

A:

The option “Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated” is useful in a different setting: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. The case being tested is: A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The direct acceptance evidence is “Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF”.

C:

That choice—“Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs”—addresses this other problem: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. Here the scenario is: A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The direct acceptance evidence is “Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF”.

D:

“Verify the intended external session and imported/exported prefixes appear only in the proper tenant routing context” is associated with a distinct issue: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. By contrast, the actual problem is: A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The direct acceptance evidence is “Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF”.

Question 869

An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. Which initial check would most directly distinguish the likely cause?

  1. Compare pristine, incremental and rendered configuration artifacts for the targeted device and intended change.
  2. Inspect the Staged, Uncommitted and Active states and per-device deployment status.
  3. Check each device's state, failed action details and intended-versus-running configuration revision.
  4. Inspect pending differences and deploy status from the blueprint UI before accepting the change.

Explanation

Correct Answer

D:

This checks the relevant evidence first: inspect pending differences and deploy status from the blueprint UI before accepting the change. The underlying concept is that controlled build and deploy phases separate design validation, reviewed staged changes and active device updates. After confirming the finding, a controlled remediation is to review the changes, commit the authorized revision and monitor the resulting device deployments.

Incorrect Answers

A:

“Compare pristine, incremental and rendered configuration artifacts for the targeted device and intended change” is associated with a distinct issue: A new Apstra deployment includes baseline settings, platform-specific changes and generated overlay commands that an engineer wants to distinguish. By contrast, the actual problem is: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. The relevant inspection is: Inspect pending differences and deploy status from the blueprint UI before accepting the change. The most discriminating first check is “Inspect pending differences and deploy status from the blueprint UI before accepting the change”.

B:

The option “Inspect the Staged, Uncommitted and Active states and per-device deployment status” is useful in a different setting: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. The case being tested is: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. The relevant inspection is: Inspect pending differences and deploy status from the blueprint UI before accepting the change. The most discriminating first check is “Inspect pending differences and deploy status from the blueprint UI before accepting the change”.

C:

“Check each device's state, failed action details and intended-versus-running configuration revision” is relevant to a different condition: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The stated question instead concerns: An Apstra operator wants to distinguish blueprint validation from the actual deployment to managed switches. The relevant inspection is: Inspect pending differences and deploy status from the blueprint UI before accepting the change. The most discriminating first check is “Inspect pending differences and deploy status from the blueprint UI before accepting the change”.

Question 870

An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. Which evidence most directly verifies the intended network outcome?

  1. Confirm the graph shows the intended node relationships and end-to-end attachment tests pass.
  2. Confirm the result contains all intended rack uplinks and excludes unrelated interface objects.
  3. Compare query results with a known inventory sample and correct false-positive attachments.
  4. Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm the graph shows the intended node relationships and end-to-end attachment tests pass. The decisive investigation is to inspect the actual node properties, expected connected edges and corresponding blueprint intent. The governing principle is that graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation.

Incorrect Answers

B:

“Confirm the result contains all intended rack uplinks and excludes unrelated interface objects” is associated with a distinct issue: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. By contrast, the actual problem is: An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. Graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation. The direct acceptance evidence is “Confirm the graph shows the intended node relationships and end-to-end attachment tests pass”.

C:

The option “Compare query results with a known inventory sample and correct false-positive attachments” is useful in a different setting: An operations dashboard must report which workload attachments inherit a specific project label. The case being tested is: An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. Graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation. The direct acceptance evidence is “Confirm the graph shows the intended node relationships and end-to-end attachment tests pass”.

D:

“Confirm only the intended rack or tenant objects generate results and anomalies on repeat tests” is relevant to a different condition: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. The stated question instead concerns: An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. Graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation. The direct acceptance evidence is “Confirm the graph shows the intended node relationships and end-to-end attachment tests pass”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests