mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 85

Question 840

A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. Which design or operational principle best explains this behavior?

  1. Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes.
  2. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly.
  3. In a conventional Clos IP fabric, leaves connect through spines to preserve predictable equal-cost paths and scaling.
  4. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly.

Explanation

Correct Answer

B:

an IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. Here, a data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. A useful discriminating check is to inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints.

Incorrect Answers

A:

The option “Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes” is useful in a different setting: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. The case being tested is: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. The controlling principle is “An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly”.

C:

That choice—“In a conventional Clos IP fabric, leaves connect through spines to preserve predictable equal-cost paths and scaling”—addresses this other problem: A team designs a three-stage leaf-spine fabric but wants to connect leaf switches to one another for ordinary transit. Here the scenario is: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. The controlling principle is “An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly”.

D:

“Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly” is associated with a distinct issue: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. By contrast, the actual problem is: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. The controlling principle is “An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly”.

Question 841

A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Which design or operational principle best explains this behavior?

  1. Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries.
  2. Connectivity templates define host-facing virtual-network endpoint membership and tagging behavior.
  3. Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone.
  4. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context.

Explanation

Correct Answer

C:

connectivity templates can describe supported external routing sessions and attach them to the intended routing zone. Here, a routed external firewall must exchange routes with a border leaf for only one tenant VRF. A useful discriminating check is to inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy.

Incorrect Answers

A:

“Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries” is associated with a distinct issue: A route export template applied to a border device advertises all tenant prefixes beyond the data center. By contrast, the actual problem is: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone. The controlling principle is “Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone”.

B:

The option “Connectivity templates define host-facing virtual-network endpoint membership and tagging behavior” is useful in a different setting: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. The case being tested is: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone. The controlling principle is “Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone”.

D:

That choice—“A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context”—addresses this other problem: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. Here the scenario is: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone. The controlling principle is “Connectivity templates can describe supported external routing sessions and attach them to the intended routing zone”.

Question 842

An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. Which evidence most directly verifies the intended network outcome?

  1. Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged.
  2. Prove the revised blueprint builds with valid allocations and switches converge on intended active state.
  3. Confirm active blueprint state matches the intended retained revision and critical services recover.
  4. Confirm no required pending work was silently lost and the correct historical revision became active.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm no required pending work was silently lost and the correct historical revision became active. The decisive investigation is to inspect and preserve or commit required pending modifications before initiating a revision jump. The governing principle is that a Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners.

Incorrect Answers

A:

That choice—“Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged”—addresses this other problem: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. Here the scenario is: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners. The direct acceptance evidence is “Confirm no required pending work was silently lost and the correct historical revision became active”.

B:

“Prove the revised blueprint builds with valid allocations and switches converge on intended active state” is associated with a distinct issue: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. By contrast, the actual problem is: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners. The direct acceptance evidence is “Confirm no required pending work was silently lost and the correct historical revision became active”.

C:

The option “Confirm active blueprint state matches the intended retained revision and critical services recover” is useful in a different setting: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. The case being tested is: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners. The direct acceptance evidence is “Confirm no required pending work was silently lost and the correct historical revision became active”.

Question 843

A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. Which controlled change best addresses the described requirement?

  1. Correct the cable plan to use approved physically independent spine paths.
  2. Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate.
  3. Expand spine capacity or rescope rack additions under a supported topology design.
  4. Create or select the approved reusable rack type and instantiate the rack consistently.

Explanation

Correct Answer

A:

This action addresses the stated defect: correct the cable plan to use approved physically independent spine paths. The underlying constraint is that physical topology diversity is necessary to avoid a common point of failure when rack redundancy is required. Verify rather than assume success: validate intended path diversity against the generated cable map and a controlled spine failure test.

Incorrect Answers

B:

That choice—“Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate”—addresses this other problem: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. Here the scenario is: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. Correct the cable plan to use approved physically independent spine paths. The most relevant correction is “Correct the cable plan to use approved physically independent spine paths”.

C:

“Expand spine capacity or rescope rack additions under a supported topology design” is associated with a distinct issue: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. By contrast, the actual problem is: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. Correct the cable plan to use approved physically independent spine paths. The most relevant correction is “Correct the cable plan to use approved physically independent spine paths”.

D:

The option “Create or select the approved reusable rack type and instantiate the rack consistently” is useful in a different setting: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. The case being tested is: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. Correct the cable plan to use approved physically independent spine paths. The most relevant correction is “Correct the cable plan to use approved physically independent spine paths”.

Question 844

A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Which shortcut would be most likely to undermine this objective?

  1. Run changes against every switch because tags are only informational.
  2. Assign VNIs by copying a number from an unrelated tenant's design sheet.
  3. Manually reuse an existing VTEP address to bypass resource exhaustion.
  4. Assume the logical device automatically creates additional physical interfaces on undersized hardware.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: assume the logical device automatically creates additional physical interfaces on undersized hardware. It violates the principle that logical device definitions represent required interface roles and capacities, independent of hardware SKU details. An appropriate alternative is to use a compatible logical device and device profile combination with sufficient supported host ports.

Incorrect Answers

A:

The option “Run changes against every switch because tags are only informational” is useful in a different setting: An automation wants to select switches tagged with a particular site and deployment tier. The case being tested is: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The directly relevant unsafe shortcut is “Assume the logical device automatically creates additional physical interfaces on undersized hardware”.

B:

“Assign VNIs by copying a number from an unrelated tenant's design sheet” is relevant to a different condition: A data center creates two tenants with conflicting VNI allocations despite using a shared Apstra resource service. The stated question instead concerns: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The directly relevant unsafe shortcut is “Assume the logical device automatically creates additional physical interfaces on undersized hardware”.

C:

That choice—“Manually reuse an existing VTEP address to bypass resource exhaustion”—addresses this other problem: An Apstra design runs out of loopback addresses when adding an additional leaf group. Here the scenario is: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. Logical device definitions represent required interface roles and capacities, independent of hardware SKU details. The directly relevant unsafe shortcut is “Assume the logical device automatically creates additional physical interfaces on undersized hardware”.

Question 845

A new configlet unexpectedly adds a command to spine switches when it was intended for a single border leaf. Which design or operational principle best explains this behavior?

  1. Apstra property sets can centralize reusable named parameters referenced by supported configuration templates.
  2. Configlets can extend generated device configuration through controlled, scoped supplemental configuration.
  3. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations.
  4. Configlet applicability must be scoped precisely to affected devices and interfaces.

Explanation

Correct Answer

D:

configlet applicability must be scoped precisely to affected devices and interfaces. Here, a new configlet unexpectedly adds a command to spine switches when it was intended for a single border leaf. A useful discriminating check is to inspect configlet attachment criteria and generated configuration diffs for all matching targets.

Incorrect Answers

A:

“Apstra property sets can centralize reusable named parameters referenced by supported configuration templates” is associated with a distinct issue: A blueprint operator maintains repeated data center operational variables that should have a single validated definition. By contrast, the actual problem is: A new configlet unexpectedly adds a command to spine switches when it was intended for a single border leaf. Configlet applicability must be scoped precisely to affected devices and interfaces. The controlling principle is “Configlet applicability must be scoped precisely to affected devices and interfaces”.

B:

The option “Configlets can extend generated device configuration through controlled, scoped supplemental configuration” is useful in a different setting: An application requires a supported vendor-specific setting absent from the blueprint's default rendered commands. The case being tested is: A new configlet unexpectedly adds a command to spine switches when it was intended for a single border leaf. Configlet applicability must be scoped precisely to affected devices and interfaces. The controlling principle is “Configlet applicability must be scoped precisely to affected devices and interfaces”.

C:

“Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations” is relevant to a different condition: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. The stated question instead concerns: A new configlet unexpectedly adds a command to spine switches when it was intended for a single border leaf. Configlet applicability must be scoped precisely to affected devices and interfaces. The controlling principle is “Configlet applicability must be scoped precisely to affected devices and interfaces”.

Question 846

An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Which design or operational principle best explains this behavior?

  1. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion.
  2. Graph and probe context can correlate multiple anomalies to a shared physical or logical source.
  3. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope.
  4. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches.

Explanation

Correct Answer

D:

analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. Here, an Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. A useful discriminating check is to inspect affected probe stages, timestamps and source telemetry along the application path.

Incorrect Answers

A:

That choice—“A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion”—addresses this other problem: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. Here the scenario is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. The controlling principle is “Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches”.

B:

“Graph and probe context can correlate multiple anomalies to a shared physical or logical source” is associated with a distinct issue: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. By contrast, the actual problem is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. The controlling principle is “Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches”.

C:

The option “An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope” is useful in a different setting: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. The case being tested is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. The controlling principle is “Analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches”.

Question 847

An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Which design or operational principle best explains this behavior?

  1. Rack type and leaf selection must support the intended redundant attachment topology and host interface roles.
  2. Total spine capacity includes available physical ports and supported link-speed and topology constraints.
  3. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint.
  4. Physical topology diversity is necessary to avoid a common point of failure when rack redundancy is required.

Explanation

Correct Answer

C:

rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. Here, an Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. A useful discriminating check is to inspect rack type properties and compare the proposed rack's connectivity with its validated peers.

Incorrect Answers

A:

“Rack type and leaf selection must support the intended redundant attachment topology and host interface roles” is relevant to a different condition: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The stated question instead concerns: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The controlling principle is “Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint”.

B:

That choice—“Total spine capacity includes available physical ports and supported link-speed and topology constraints”—addresses this other problem: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. Here the scenario is: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The controlling principle is “Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint”.

D:

The option “Physical topology diversity is necessary to avoid a common point of failure when rack redundancy is required” is useful in a different setting: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The case being tested is: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint. The controlling principle is “Rack types are reusable logical patterns for leaf topology and attached systems within a blueprint”.

Question 848

A team needs to group rack devices for maintenance based on operational ownership without renaming every node. Which evidence most directly verifies the intended network outcome?

  1. Verify all new logical devices receive unique assigned addresses and route reachability remains correct.
  2. Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites.
  3. Validate logical port counts and generated rack connections before building the blueprint.
  4. Confirm each active virtual network has the intended unique or explicitly shared VNI mapping.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites. The decisive investigation is to inspect object tags and query results before selecting the intended device set. The governing principle is that Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity.

Incorrect Answers

A:

The option “Verify all new logical devices receive unique assigned addresses and route reachability remains correct” is useful in a different setting: A new blueprint assigns every VTEP from a resource pool that is too small for the proposed rack count. The case being tested is: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity. The direct acceptance evidence is “Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites”.

C:

That choice—“Validate logical port counts and generated rack connections before building the blueprint”—addresses this other problem: A rack template chooses a logical device with insufficient server ports for its planned generic systems. Here the scenario is: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity. The direct acceptance evidence is “Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites”.

D:

“Confirm each active virtual network has the intended unique or explicitly shared VNI mapping” is associated with a distinct issue: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. By contrast, the actual problem is: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity. The direct acceptance evidence is “Confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites”.

Question 849

Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Which design or operational principle best explains this behavior?

  1. The Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model.
  2. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership.
  3. Apstra role-based access control separates read visibility from permissions to change managed fabric objects.
  4. Supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation.

Explanation

Correct Answer

B:

centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. Here, two on-call staff attempt to stage modifications for the same fabric without a documented approval process. A useful discriminating check is to review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits.

Incorrect Answers

A:

“The Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model” is associated with a distinct issue: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. By contrast, the actual problem is: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. The controlling principle is “Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership”.

C:

“Apstra role-based access control separates read visibility from permissions to change managed fabric objects” is relevant to a different condition: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. The stated question instead concerns: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. The controlling principle is “Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership”.

D:

That choice—“Supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation”—addresses this other problem: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Here the scenario is: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. The controlling principle is “Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership”.

Question 850

An operations team recovers a backup of the controller taken before the most recent fabric changes. Which controlled change best addresses the described requirement?

  1. Grant the minimum documented blueprint role permissions through the approved access-review process.
  2. Use the documented recovery and reconciliation procedure before attempting broad deployment changes.
  3. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.
  4. Restore the supported device-agent connection and management credentials without bypassing security checks.

Explanation

Correct Answer

B:

This action addresses the stated defect: use the documented recovery and reconciliation procedure before attempting broad deployment changes. The underlying constraint is that the controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. Verify rather than assume success: confirm intended and running configurations are consistent and the fabric's critical paths remain operational.

Incorrect Answers

A:

That choice—“Grant the minimum documented blueprint role permissions through the approved access-review process”—addresses this other problem: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Here the scenario is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The governing requirement is to use the documented recovery and reconciliation procedure before attempting broad deployment changes. The most relevant correction is “Use the documented recovery and reconciliation procedure before attempting broad deployment changes”.

C:

The option “Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits” is useful in a different setting: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. The case being tested is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The governing requirement is to use the documented recovery and reconciliation procedure before attempting broad deployment changes. The most relevant correction is “Use the documented recovery and reconciliation procedure before attempting broad deployment changes”.

D:

“Restore the supported device-agent connection and management credentials without bypassing security checks” is relevant to a different condition: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. The stated question instead concerns: An operations team recovers a backup of the controller taken before the most recent fabric changes. The governing requirement is to use the documented recovery and reconciliation procedure before attempting broad deployment changes. The most relevant correction is “Use the documented recovery and reconciliation procedure before attempting broad deployment changes”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests