mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 75

Question 740

An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. Which controlled change best addresses the described requirement?

  1. Configure the supported aggregation and alert conditions with documented baseline behavior.
  2. Configure an approved probe or probe-stage threshold for the scoped leaf group and validate its data collection.
  3. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics.
  4. Restore justified monitoring sensitivity and remediate the measured issue instead of hiding it.

Explanation

Correct Answer

A:

This action addresses the stated defect: configure the supported aggregation and alert conditions with documented baseline behavior. The underlying constraint is that IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly. Verify rather than assume success: verify staged derived metrics match sample inputs and test threshold crossings produce accurate alarms.

Incorrect Answers

B:

“Configure an approved probe or probe-stage threshold for the scoped leaf group and validate its data collection” is relevant to a different condition: An operator wants an early-warning signal when fabric interface errors exceed a defined threshold. The stated question instead concerns: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The governing requirement is to Configure the supported aggregation and alert conditions with documented baseline behavior. The most relevant correction is “Configure the supported aggregation and alert conditions with documented baseline behavior”.

C:

That choice—“Narrow the query and probe stages to the correct blueprint nodes and monitored metrics”—addresses this other problem: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. Here the scenario is: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The governing requirement is to Configure the supported aggregation and alert conditions with documented baseline behavior. The most relevant correction is “Configure the supported aggregation and alert conditions with documented baseline behavior”.

D:

“Restore justified monitoring sensitivity and remediate the measured issue instead of hiding it” is associated with a distinct issue: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. By contrast, the actual problem is: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The governing requirement is to Configure the supported aggregation and alert conditions with documented baseline behavior. The most relevant correction is “Configure the supported aggregation and alert conditions with documented baseline behavior”.

Question 741

A team needs to group rack devices for maintenance based on operational ownership without renaming every node. Which controlled change best addresses the described requirement?

  1. Expand or assign a correctly scoped resource pool without overlapping existing allocations.
  2. Use a compatible logical device and device profile combination with sufficient supported host ports.
  3. Apply consistent approved tags and verify the automation selector matches only the intended objects.
  4. Use validated unique VNI allocations or partition resource pools according to approved boundaries.

Explanation

Correct Answer

C:

This action addresses the stated defect: apply consistent approved tags and verify the automation selector matches only the intended objects. The underlying constraint is that Apstra tags can identify logical objects for consistent inventory selection and operations without changing topology identity. Verify rather than assume success: confirm a dry-run targets exactly the desired rack and leaf set and excludes other sites.

Incorrect Answers

A:

“Expand or assign a correctly scoped resource pool without overlapping existing allocations” is associated with a distinct issue: A new blueprint assigns every VTEP from a resource pool that is too small for the proposed rack count. By contrast, the actual problem is: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. The governing requirement is to apply consistent approved tags and verify the automation selector matches only the intended objects. The most relevant correction is “Apply consistent approved tags and verify the automation selector matches only the intended objects”.

B:

The option “Use a compatible logical device and device profile combination with sufficient supported host ports” is useful in a different setting: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. The case being tested is: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. The governing requirement is to apply consistent approved tags and verify the automation selector matches only the intended objects. The most relevant correction is “Apply consistent approved tags and verify the automation selector matches only the intended objects”.

D:

That choice—“Use validated unique VNI allocations or partition resource pools according to approved boundaries”—addresses this other problem: A data center creates two tenants with conflicting VNI allocations despite using a shared Apstra resource service. Here the scenario is: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. The governing requirement is to apply consistent approved tags and verify the automation selector matches only the intended objects. The most relevant correction is “Apply consistent approved tags and verify the automation selector matches only the intended objects”.

Question 742

A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Which controlled change best addresses the described requirement?

  1. Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability.
  2. Correct the approved virtual-network attachment and associated host-facing VLAN primitives.
  3. Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes.
  4. Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment.

Explanation

Correct Answer

B:

This action addresses the stated defect: correct the approved virtual-network attachment and associated host-facing VLAN primitives. The underlying constraint is that hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. Verify rather than assume success: confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable.

Incorrect Answers

A:

That choice—“Apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability”—addresses this other problem: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. Here the scenario is: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Correct the approved virtual-network attachment and associated host-facing VLAN primitives. The most relevant correction is “Correct the approved virtual-network attachment and associated host-facing VLAN primitives”.

C:

The option “Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes” is useful in a different setting: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. The case being tested is: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Correct the approved virtual-network attachment and associated host-facing VLAN primitives. The most relevant correction is “Correct the approved virtual-network attachment and associated host-facing VLAN primitives”.

D:

“Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment” is relevant to a different condition: A route export template applied to a border device advertises all tenant prefixes beyond the data center. The stated question instead concerns: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Correct the approved virtual-network attachment and associated host-facing VLAN primitives. The most relevant correction is “Correct the approved virtual-network attachment and associated host-facing VLAN primitives”.

Question 743

An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Which initial check would most directly distinguish the likely cause?

  1. Inspect affected probe stages, timestamps and source telemetry along the application path.
  2. Group probe anomalies by affected node and stage, then inspect linked telemetry and topology edges.
  3. Compare live raw telemetry, probe thresholds and application SLOs before and after the change.
  4. Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric.

Explanation

Correct Answer

A:

This checks the relevant evidence first: inspect affected probe stages, timestamps and source telemetry along the application path. The underlying concept is that analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. After confirming the finding, a controlled remediation is to correlate the observed metrics with topology and tune or remediate the validated underlying condition.

Incorrect Answers

B:

That choice—“Group probe anomalies by affected node and stage, then inspect linked telemetry and topology edges”—addresses this other problem: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Here the scenario is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. The relevant inspection is: Inspect affected probe stages, timestamps and source telemetry along the application path. The most discriminating first check is “Inspect affected probe stages, timestamps and source telemetry along the application path”.

C:

“Compare live raw telemetry, probe thresholds and application SLOs before and after the change” is associated with a distinct issue: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. By contrast, the actual problem is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. The relevant inspection is: Inspect affected probe stages, timestamps and source telemetry along the application path. The most discriminating first check is “Inspect affected probe stages, timestamps and source telemetry along the application path”.

D:

The option “Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric” is useful in a different setting: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The case being tested is: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. The relevant inspection is: Inspect affected probe stages, timestamps and source telemetry along the application path. The most discriminating first check is “Inspect affected probe stages, timestamps and source telemetry along the application path”.

Question 744

A provider wants separate customer routing domains that can reuse 10.10.0.0/16 without ambiguity. Which evidence most directly verifies the intended network outcome?

  1. Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated.
  2. Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF.
  3. Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked.
  4. Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs. The decisive investigation is to inspect VRF and routing-zone membership, tenant virtual-network bindings and imported routes. The governing principle is that Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design.

Incorrect Answers

A:

The option “Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated” is useful in a different setting: A development VN is accidentally assigned to the wrong routing zone during a project migration. The case being tested is: A provider wants separate customer routing domains that can reuse 10.10.0.0/16 without ambiguity. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design. The direct acceptance evidence is “Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs”.

B:

“Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF” is relevant to a different condition: A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. The stated question instead concerns: A provider wants separate customer routing domains that can reuse 10.10.0.0/16 without ambiguity. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design. The direct acceptance evidence is “Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs”.

C:

That choice—“Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked”—addresses this other problem: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. Here the scenario is: A provider wants separate customer routing domains that can reuse 10.10.0.0/16 without ambiguity. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design. The direct acceptance evidence is “Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs”.

Question 745

A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. Which evidence most directly verifies the intended network outcome?

  1. Prove design-stage topology and resource validation before committing to hardware procurement.
  2. Confirm topology validation succeeds and the planned rack connections fit the chosen design.
  3. Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions.
  4. Confirm each instantiated rack matches its logical leaf/uplink topology and allocated resources.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm topology validation succeeds and the planned rack connections fit the chosen design. The decisive investigation is to compare the proposed topology with supported reference-design dimensions and template requirements. The governing principle is that Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning.

Incorrect Answers

A:

“Prove design-stage topology and resource validation before committing to hardware procurement” is associated with a distinct issue: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. By contrast, the actual problem is: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning. The direct acceptance evidence is “Confirm topology validation succeeds and the planned rack connections fit the chosen design”.

C:

“Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions” is relevant to a different condition: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. The stated question instead concerns: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning. The direct acceptance evidence is “Confirm topology validation succeeds and the planned rack connections fit the chosen design”.

D:

That choice—“Confirm each instantiated rack matches its logical leaf/uplink topology and allocated resources”—addresses this other problem: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. Here the scenario is: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning. The direct acceptance evidence is “Confirm topology validation succeeds and the planned rack connections fit the chosen design”.

Question 746

A data center needs to add another rack to a production fabric without replacing the existing blueprint. Which controlled change best addresses the described requirement?

  1. Create or update the authorized generic system and its connectivity template within the staged blueprint.
  2. Investigate unexpected changes using the appropriate generated-config view and approved override workflow.
  3. Stage the new rack, assign valid devices and resources, validate, then commit through change control.
  4. Select the approved prior revision, review resulting uncommitted differences and commit the rollback following change control.

Explanation

Correct Answer

C:

This action addresses the stated defect: stage the new rack, assign valid devices and resources, validate, then commit through change control. The underlying constraint is that Apstra supports controlled blueprint day-two rack additions using supported rack types, resources and spine capacity. Verify rather than assume success: confirm the rack is represented in active intent and all expected uplinks and tenant services work.

Incorrect Answers

A:

That choice—“Create or update the authorized generic system and its connectivity template within the staged blueprint”—addresses this other problem: A new dual-homed application server is physically connected but its logical attachment is absent from the active blueprint. Here the scenario is: A data center needs to add another rack to a production fabric without replacing the existing blueprint. Stage the new rack, assign valid devices and resources, validate, then commit through change control. The most relevant correction is “Stage the new rack, assign valid devices and resources, validate, then commit through change control”.

B:

“Investigate unexpected changes using the appropriate generated-config view and approved override workflow” is associated with a distinct issue: A network engineer sees differences among the pristine, incremental and rendered configurations for a managed leaf. By contrast, the actual problem is: A data center needs to add another rack to a production fabric without replacing the existing blueprint. Stage the new rack, assign valid devices and resources, validate, then commit through change control. The most relevant correction is “Stage the new rack, assign valid devices and resources, validate, then commit through change control”.

D:

“Select the approved prior revision, review resulting uncommitted differences and commit the rollback following change control” is relevant to a different condition: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. The stated question instead concerns: A data center needs to add another rack to a production fabric without replacing the existing blueprint. Stage the new rack, assign valid devices and resources, validate, then commit through change control. The most relevant correction is “Stage the new rack, assign valid devices and resources, validate, then commit through change control”.

Question 747

A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Which evidence most directly verifies the intended network outcome?

  1. Confirm the service anomaly clears and the affected workload network passes functional tests.
  2. Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms.
  3. Confirm live telemetry returns inside accepted bounds and the probe alert clears with supporting samples.
  4. Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms. The decisive investigation is to inspect anomaly type and affected graph nodes before selecting the next technical investigation. The governing principle is that Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations.

Incorrect Answers

A:

“Confirm the service anomaly clears and the affected workload network passes functional tests” is relevant to a different condition: An operator sees a tenant-service warning while physical switch availability indicators remain green. The stated question instead concerns: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The direct acceptance evidence is “Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms”.

C:

“Confirm live telemetry returns inside accepted bounds and the probe alert clears with supporting samples” is associated with a distinct issue: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. By contrast, the actual problem is: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The direct acceptance evidence is “Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms”.

D:

The option “Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands” is useful in a different setting: An application requires a supported vendor-specific setting absent from the blueprint's default rendered commands. The case being tested is: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The direct acceptance evidence is “Confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms”.

Question 748

A design review confuses Type 2 MAC-IP advertisements with Type 5 IP prefix advertisements in an ERB fabric. Which shortcut would be most likely to undermine this objective?

  1. Force all inter-VLAN application traffic through an unmanaged central hairpin without validating the gateway design.
  2. Configure unrelated virtual gateway identities per rack while claiming a single anycast first hop.
  3. Assume Type 2 MAC advertisements alone always provide every external routed subnet.
  4. Assume every EVPN route type is interchangeable merely because it carries a network address.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: assume every EVPN route type is interchangeable merely because it carries a network address. It violates the principle that EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. An appropriate alternative is to advertise and import the required host or prefix routes according to the approved ERB routing design.

Incorrect Answers

A:

The option “Force all inter-VLAN application traffic through an unmanaged central hairpin without validating the gateway design” is useful in a different setting: A leaf gateway must route a workload's inter-subnet traffic locally rather than always hairpinning through a central aggregation switch. The case being tested is: A design review confuses Type 2 MAC-IP advertisements with Type 5 IP prefix advertisements in an ERB fabric. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. The directly relevant unsafe shortcut is “Assume every EVPN route type is interchangeable merely because it carries a network address”.

B:

“Configure unrelated virtual gateway identities per rack while claiming a single anycast first hop” is relevant to a different condition: An anycast gateway design uses inconsistent SVI gateway parameters on two participating leafs. The stated question instead concerns: A design review confuses Type 2 MAC-IP advertisements with Type 5 IP prefix advertisements in an ERB fabric. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. The directly relevant unsafe shortcut is “Assume every EVPN route type is interchangeable merely because it carries a network address”.

C:

That choice—“Assume Type 2 MAC advertisements alone always provide every external routed subnet”—addresses this other problem: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. Here the scenario is: A design review confuses Type 2 MAC-IP advertisements with Type 5 IP prefix advertisements in an ERB fabric. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. The directly relevant unsafe shortcut is “Assume every EVPN route type is interchangeable merely because it carries a network address”.

Question 749

An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. Which shortcut would be most likely to undermine this objective?

  1. Treat absence of a service configuration anomaly as proof that every application performance metric is normal.
  2. Declare recovery solely from a green dashboard after suppressing all probe alerts.
  3. Disable all analytics probes because several symptoms share the same source device.
  4. Disable interface telemetry to suppress alerts caused by rising packet errors.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: declare recovery solely from a green dashboard after suppressing all probe alerts. It violates the principle that a cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. An appropriate alternative is to restore justified monitoring sensitivity and remediate the measured issue instead of hiding it.

Incorrect Answers

A:

“Treat absence of a service configuration anomaly as proof that every application performance metric is normal” is associated with a distinct issue: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. By contrast, the actual problem is: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The directly relevant unsafe shortcut is “Declare recovery solely from a green dashboard after suppressing all probe alerts”.

C:

“Disable all analytics probes because several symptoms share the same source device” is relevant to a different condition: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. The stated question instead concerns: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The directly relevant unsafe shortcut is “Declare recovery solely from a green dashboard after suppressing all probe alerts”.

D:

That choice—“Disable interface telemetry to suppress alerts caused by rising packet errors”—addresses this other problem: An operator wants an early-warning signal when fabric interface errors exceed a defined threshold. Here the scenario is: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The directly relevant unsafe shortcut is “Declare recovery solely from a green dashboard after suppressing all probe alerts”.

Question 750

A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Which controlled change best addresses the described requirement?

  1. Assign the replacement supported system to the correct logical role using the documented controlled process.
  2. Correct the duplicate device registration and assign each real device its own validated identity.
  3. Correct physical cabling or update the approved design only after confirming the intended topology.
  4. Install or repair the supported agent and associate the correct device identity through approved onboarding.

Explanation

Correct Answer

D:

This action addresses the stated defect: install or repair the supported agent and associate the correct device identity through approved onboarding. The underlying constraint is that Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity. Verify rather than assume success: confirm the device appears healthy, available and uniquely identified for blueprint assignment.

Incorrect Answers

A:

That choice—“Assign the replacement supported system to the correct logical role using the documented controlled process”—addresses this other problem: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. Here the scenario is: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Install or repair the supported agent and associate the correct device identity through approved onboarding. The most relevant correction is “Install or repair the supported agent and associate the correct device identity through approved onboarding”.

B:

“Correct the duplicate device registration and assign each real device its own validated identity” is associated with a distinct issue: A deployment team duplicates a device-system ID when registering two new leaf switches. By contrast, the actual problem is: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Install or repair the supported agent and associate the correct device identity through approved onboarding. The most relevant correction is “Install or repair the supported agent and associate the correct device identity through approved onboarding”.

C:

The option “Correct physical cabling or update the approved design only after confirming the intended topology” is useful in a different setting: A newly staged fabric reports LLDP neighbor mismatches although physical links are up. The case being tested is: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Install or repair the supported agent and associate the correct device identity through approved onboarding. The most relevant correction is “Install or repair the supported agent and associate the correct device identity through approved onboarding”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests