mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 8

Question 70

A BGP export policy matches a community but no routes leave the peer after a group-level policy reorder. What should the operations engineer do first to address the stated fault?

  1. Recommended change: Split export policy by authorized customer scope and verify negative advertisements.
  2. Next step: Inspect effective group and neighbor export policy evaluation order.
  3. Corrective action: Review segment identifiers and forwarding under SR-MPLS.
  4. Apply this control: Review EBGP multihop transport reachability and session parameters.

Explanation

Correct Answer

B:

This option addresses the stated case rather than another networking issue. Principle: Policy inheritance and term action order affect BGP route advertisement. Remedy: Inspect effective group and neighbor export policy evaluation order. Proof: A neighbor route view confirms the approved community-tagged routes are sent.

Incorrect Answers

A:

Split export policy by authorized customer scope and verify negative advertisements is a relevant step for the separate scenario in which one customer’s new prefixes are advertised to a second unrelated customer via a shared export group. It does not directly fix this case. Instead inspect effective group and neighbor export policy evaluation order; verify: A neighbor route view confirms the approved community-tagged routes are sent.

C:

This answer would be more suitable when a provider chooses segment-routing MPLS but assumes every transit hop needs per-LSP RSVP state, where the corrective action is to review segment identifiers and forwarding under SR-MPLS. The failure here is different: Policy inheritance and term action order affect BGP route advertisement. Required validation: A neighbor route view confirms the approved community-tagged routes are sent.

D:

This option overlooks the decisive condition. Its supporting principle is eBGP speakers separated by intermediate devices require deliberate transport reachability and hop policy, while this scenario depends on policy inheritance and term action order affect BGP route advertisement. Verify the correction with: A neighbor route view confirms the approved community-tagged routes are sent.

Question 71

Two MSTP switches place the same VLAN into different instances due to region configuration drift. What operational check demonstrates that the intended outcome occurred?

  1. Closeout evidence: A region status check shows the intended shared instance mapping.
  2. Acceptance check: The ring converges with no forwarding loop and sustained connectivity.
  3. The test confirms that a topology test leaves one redundant path nonforwarding and traffic remains reachable.
  4. Expected observation: An end-host packet enters the correct VLAN without requiring endpoint tagging.

Explanation

Correct Answer

A:

The selected response implements the principle that mSTP region agreement affects how instances interoperate across links. The engineer should align region identity, revision and VLAN mapping as required. Successful confirmation means: A region status check shows the intended shared instance mapping.

Incorrect Answers

B:

That result would be useful for a different failure, namely: A new redundant uplink produces a broadcast storm on an access VLAN. The current case specifically calls for: Align region identity, revision and VLAN mapping as required. The required observed result is: A region status check shows the intended shared instance mapping.

C:

This response would target a different source scenario: A Layer 2 ring floods broadcast frames repeatedly after an extra cable is connected. It cannot establish the current acceptance requirement, which is: A region status check shows the intended shared instance mapping. The relevant action is: Align region identity, revision and VLAN mapping as required.

D:

Distinguish access port traffic from trunk tagging behavior is a relevant step for the separate scenario in which an access port sends untagged user traffic but the engineer expects a VLAN tag from the endpoint on every frame. It does not directly fix this case. Instead align region identity, revision and VLAN mapping as required; verify: A region status check shows the intended shared instance mapping.

Question 72

An access switch forwards untagged traffic into VLAN 20 after a port is moved to VLAN 30. Which combined repair and acceptance criterion is strongest?

  1. Repair: Check committed access VLAN settings and operational membership rather than relying on notes. Check: The moved test port places incoming untagged frames only in VLAN 30.
  2. Change: Inspect STP state and enable the approved spanning-tree protocol for that bridge domain. Test: The ring converges with no forwarding loop and sustained connectivity.
  3. Implement: Inspect VLAN membership and tagging on both ends and verify per-VLAN MAC learning. Verify: Separate tagged tests pass in both permitted VLANs.
  4. Control: Distinguish access port traffic from trunk tagging behavior. Accepted result: An end-host packet enters the correct VLAN without requiring endpoint tagging.

Explanation

Correct Answer

A:

This is the model-intended best choice because vLAN reassignment must be verified in actual port classification. The targeted correction is to check committed access VLAN settings and operational membership rather than relying on notes. Validate it by observing that the moved test port places incoming untagged frames only in VLAN 30.

Incorrect Answers

B:

This option overlooks the decisive condition. Its supporting principle is loop prevention depends on compatible STP participation across redundant Ethernet links, while this scenario depends on vLAN reassignment must be verified in actual port classification. Verify the correction with: The moved test port places incoming untagged frames only in VLAN 30.

C:

MAC table visibility alone does not prove trunk authorization for every VLAN describes a neighboring protocol concern. In this case the controlling fact is vLAN reassignment must be verified in actual port classification. A correct remediation would check committed access VLAN settings and operational membership rather than relying on notes and demonstrate: The moved test port places incoming untagged frames only in VLAN 30.

D:

The proposed principle concerns another network fault: Port mode determines which customer frames are tagged or untagged at the boundary. Here, vLAN reassignment must be verified in actual port classification. The most direct correction is to check committed access VLAN settings and operational membership rather than relying on notes, confirmed by the moved test port places incoming untagged frames only in VLAN 30.

Question 73

An access port sends untagged user traffic but the engineer expects a VLAN tag from the endpoint on every frame. Which change best corrects the failure without losing the intended design?

  1. Corrective action: Separate provider service identification from customer VLAN identifiers.
  2. Apply this control: Review allowed VLAN membership on both trunk endpoints.
  3. Remediation: Distinguish access port traffic from trunk tagging behavior.
  4. Recommended change: Differentiate forwarding continuity under GRES from routing-protocol state preservation.

Explanation

Correct Answer

C:

The critical observation is: Port mode determines which customer frames are tagged or untagged at the boundary. Correct it by taking this action: Distinguish access port traffic from trunk tagging behavior. Confirm the outcome with: An end-host packet enters the correct VLAN without requiring endpoint tagging.

Incorrect Answers

A:

This response would target a different source scenario: Two network services use identical customer VLAN IDs and the team assumes their frames must share one L2 broadcast domain. It cannot establish the current acceptance requirement, which is: An end-host packet enters the correct VLAN without requiring endpoint tagging. The relevant action is: Distinguish access port traffic from trunk tagging behavior.

B:

Review allowed VLAN membership on both trunk endpoints is a relevant step for the separate scenario in which a trunk permits VLAN 110 but excludes VLAN 120 while users on VLAN 120 report isolation from the remote switch. It does not directly fix this case. Instead distinguish access port traffic from trunk tagging behavior; verify: An end-host packet enters the correct VLAN without requiring endpoint tagging.

D:

This answer would be more suitable when a dual-Routing-Engine chassis uses GRES but an engineer assumes routing protocol control state is preserved without any other feature, where the corrective action is to differentiate forwarding continuity under GRES from routing-protocol state preservation. The failure here is different: Port mode determines which customer frames are tagged or untagged at the boundary. Required validation: An end-host packet enters the correct VLAN without requiring endpoint tagging.

Question 74

A backup path becomes primary after a preference edit even though the design called for failover only. What operational check demonstrates that the intended outcome occurred?

  1. The test confirms that the unauthorized customer receives no leaked prefixes in a route advertisement check.
  2. Expected observation: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.
  3. Verification result: Only approved traffic uses the alternate table while ordinary transit remains on its path.
  4. Closeout evidence: A primary-link test chooses the expected primary then fails to backup on loss.

Explanation

Correct Answer

D:

This option addresses the stated case rather than another networking issue. Principle: Preference edits can change route selection without any interface outage. Remedy: Restore the intended route preferences and check selected forwarding next hops. Proof: A primary-link test chooses the expected primary then fails to backup on loss.

Incorrect Answers

A:

BGP group-level export policies must preserve customer routing isolation describes a neighboring protocol concern. In this case the controlling fact is preference edits can change route selection without any interface outage. A correct remediation would restore the intended route preferences and check selected forwarding next hops and demonstrate: A primary-link test chooses the expected primary then fails to backup on loss.

B:

The proposed principle concerns another network fault: A discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. Here, preference edits can change route selection without any interface outage. The most direct correction is to restore the intended route preferences and check selected forwarding next hops, confirmed by a primary-link test chooses the expected primary then fails to backup on loss.

C:

That result would be useful for a different failure, namely: An input firewall filter diverts all transit traffic to a management routing instance by mistake. The current case specifically calls for: Restore the intended route preferences and check selected forwarding next hops. The required observed result is: A primary-link test chooses the expected primary then fails to backup on loss.

Question 75

A provider tries to enable nonstop active routing and graceful-restart mode simultaneously on the same Junos device. Which test result would best confirm a successful fix?

  1. Acceptance check: The elected DR and BDR align with the tested election conditions.
  2. The test confirms that a switchover test assesses both packet forwarding and routing neighbor continuity.
  3. Expected observation: The backup assumes master role and clients retain access to the virtual gateway.
  4. Verification result: The configuration commits with an approved supported HA combination.

Explanation

Correct Answer

D:

The critical observation is: NSR and graceful restart on the local restarting device are different approaches and can conflict. Correct it by taking this action: Review supported mutual exclusivity and select the intended HA control-plane method. Confirm the outcome with: The configuration commits with an approved supported HA combination.

Incorrect Answers

A:

The alternative addresses a broadcast OSPF segment experiences repeated DR elections after interface priority changes, not the present root cause. Here the selected correction must reflect nSR and graceful restart on the local restarting device are different approaches and can conflict. Test for: The configuration commits with an approved supported HA combination.

B:

This answer would be more suitable when a dual-Routing-Engine chassis uses GRES but an engineer assumes routing protocol control state is preserved without any other feature, where the corrective action is to differentiate forwarding continuity under GRES from routing-protocol state preservation. The failure here is different: NSR and graceful restart on the local restarting device are different approaches and can conflict. Required validation: The configuration commits with an approved supported HA combination.

C:

This option overlooks the decisive condition. Its supporting principle is failover depends on compatible virtual router configuration and observable primary loss, while this scenario depends on nSR and graceful restart on the local restarting device are different approaches and can conflict. Verify the correction with: The configuration commits with an approved supported HA combination.

Question 76

An IS-IS neighbor appears only at Level 2 even though the design expects a Level 1 core segment. Which protocol behavior most directly determines the correct diagnosis?

  1. The governing rule is: The designated system serves LAN pseudonode advertisement and election semantics.
  2. The key distinction is: Frequent topology churn can stem from physical and configuration issues rather than DIS alone.
  3. Protocol behavior: Compatible IS-IS levels and area information determine available adjacency types.
  4. Underlying principle: Policy evaluation order can short-circuit later intended acceptance.

Explanation

Correct Answer

C:

This is the model-intended best choice because compatible IS-IS levels and area information determine available adjacency types. The targeted correction is to compare interface level settings and area configuration. Validate it by observing that the neighbor table shows the intended level and stable adjacency.

Incorrect Answers

A:

That result would be useful for a different failure, namely: An IS-IS LAN elects a new DIS and the engineer assumes the result must preempt every existing elected node. The current case specifically calls for: Compare interface level settings and area configuration. The required observed result is: The neighbor table shows the intended level and stable adjacency.

B:

This response would target a different source scenario: An IS-IS LAN is unstable after a VLAN move and DIS changes accompany repeated adjacency loss. It cannot establish the current acceptance requirement, which is: The neighbor table shows the intended level and stable adjacency. The relevant action is: Compare interface level settings and area configuration.

D:

The alternative addresses a BGP prefix remains rejected after an intended route filter update because an earlier term rejects it, not the present root cause. Here the selected correction must reflect compatible IS-IS levels and area information determine available adjacency types. Test for: The neighbor table shows the intended level and stable adjacency.

Question 77

A generated route is configured but its expected contributing route is absent from the routing table. What diagnosis and engineering response are most appropriate?

  1. Diagnosis: A generated route depends on its contributing-route conditions rather than mere configuration presence. Action: Verify route contribution and the conditions for route generation.
  2. Explanation: Moving route information between tables does not remove the need for a valid forwarding next hop. Repair: Evaluate routing-table relationships and next-hop resolution when using RIB groups.
  3. Fault mechanism: Forwarding-table and interface evidence localize faults beyond RIB reachability. Remediation: Compare installed forwarding entries with interface operational status and adjacency resolution.
  4. Root issue: Policy inheritance and term action order affect BGP route advertisement. Correction: Inspect effective group and neighbor export policy evaluation order.

Explanation

Correct Answer

A:

The critical observation is: A generated route depends on its contributing-route conditions rather than mere configuration presence. Correct it by taking this action: Verify route contribution and the conditions for route generation. Confirm the outcome with: The generated prefix appears only when the required contributing route is active.

Incorrect Answers

B:

Moving route information between tables does not remove the need for a valid forwarding next hop describes a neighboring protocol concern. In this case the controlling fact is a generated route depends on its contributing-route conditions rather than mere configuration presence. A correct remediation would verify route contribution and the conditions for route generation and demonstrate: The generated prefix appears only when the required contributing route is active.

C:

The proposed principle concerns another network fault: Forwarding-table and interface evidence localize faults beyond RIB reachability. Here, a generated route depends on its contributing-route conditions rather than mere configuration presence. The most direct correction is to verify route contribution and the conditions for route generation, confirmed by the generated prefix appears only when the required contributing route is active.

D:

That result would be useful for a different failure, namely: A BGP export policy matches a community but no routes leave the peer after a group-level policy reorder. The current case specifically calls for: Verify route contribution and the conditions for route generation. The required observed result is: The generated prefix appears only when the required contributing route is active.

Question 78

A policy adjustment changes both routing preference and forwarding instance selection in one unreviewed commit. What diagnosis and engineering response are most appropriate?

  1. Cause: Preference edits can change route selection without any interface outage. Response: Restore the intended route preferences and check selected forwarding next hops.
  2. Diagnosis: Routing instances isolate routing tables unless explicit import or export mechanisms connect them. Action: Define the intended route-leaking boundary between the customer's instance and the master routing table.
  3. Explanation: Small reversible route-policy changes simplify troubleshooting and rollback. Repair: Separate route-selection and lookup-table changes and test each with candidate configuration.
  4. Fault mechanism: OSPF adjacency requires compatible area and interface parameters. Remediation: Align the area membership and verify OSPF interface settings on both sides.

Explanation

Correct Answer

C:

Because small reversible route-policy changes simplify troubleshooting and rollback, the best response is to separate route-selection and lookup-table changes and test each with candidate configuration. A reviewer can close the technical case only after confirming that the rollback and candidate checks show the exact intended RIB and FIB outcomes.

Incorrect Answers

A:

Restore the intended route preferences and check selected forwarding next hops is a relevant step for the separate scenario in which a backup path becomes primary after a preference edit even though the design called for failover only. It does not directly fix this case. Instead separate route-selection and lookup-table changes and test each with candidate configuration; verify: The rollback and candidate checks show the exact intended RIB and FIB outcomes.

B:

The alternative addresses a provider creates a customer routing instance but assumes its routes will automatically be present in the master inet.0 table, not the present root cause. Here the selected correction must reflect small reversible route-policy changes simplify troubleshooting and rollback. Test for: The rollback and candidate checks show the exact intended RIB and FIB outcomes.

D:

This option overlooks the decisive condition. Its supporting principle is oSPF adjacency requires compatible area and interface parameters, while this scenario depends on small reversible route-policy changes simplify troubleshooting and rollback. Verify the correction with: The rollback and candidate checks show the exact intended RIB and FIB outcomes.

Question 79

A switch has a root port and alternate port, but the operator assumes both must forward to use all physical bandwidth. Which evidence would justify closing this troubleshooting case?

  1. The test confirms that separate tagged tests pass in both permitted VLANs.
  2. Expected observation: A topology test leaves one redundant path nonforwarding and traffic remains reachable.
  3. Verification result: The alternate port transitions appropriately after the root path fails.
  4. Closeout evidence: After fiber repair the port converges and remains in a stable role.

Explanation

Correct Answer

C:

The case turns on the distinction that a redundant alternate path can remain nonforwarding until a failure changes roles. Apply this concrete engineering step: Explain root and alternate roles in a loop-free spanning-tree topology. An acceptable verification outcome is: The alternate port transitions appropriately after the root path fails.

Incorrect Answers

A:

The proposed principle concerns another network fault: MAC table visibility alone does not prove trunk authorization for every VLAN. Here, a redundant alternate path can remain nonforwarding until a failure changes roles. The most direct correction is to explain root and alternate roles in a loop-free spanning-tree topology, confirmed by the alternate port transitions appropriately after the root path fails.

B:

That result would be useful for a different failure, namely: A Layer 2 ring floods broadcast frames repeatedly after an extra cable is connected. The current case specifically calls for: Explain root and alternate roles in a loop-free spanning-tree topology. The required observed result is: The alternate port transitions appropriately after the root path fails.

D:

Inspect interface faults and control-plane events before changing STP timers is a relevant step for the separate scenario in which an RSTP uplink continues to flap between discarding and forwarding after an unstable fiber replacement. It does not directly fix this case. Instead explain root and alternate roles in a loop-free spanning-tree topology; verify: The alternate port transitions appropriately after the root path fails.

Question 80

An RSTP uplink continues to flap between discarding and forwarding after an unstable fiber replacement. A reviewer requires a remedy and concrete test evidence. Which pairing fits?

  1. Implement: Check VRRP group, interface, priority, advertisements and tracking conditions. Verify: The backup assumes master role and clients retain access to the virtual gateway.
  2. Control: Apply supported root protection at the appropriate customer-facing boundary. Accepted result: A superior BPDU test preserves the intended root with a logged protective state.
  3. Action: Enable the appropriate spanning-tree protection and verify the blocked redundant path. Evidence: A topology test leaves one redundant path nonforwarding and traffic remains reachable.
  4. Repair: Inspect interface faults and control-plane events before changing STP timers. Check: After fiber repair the port converges and remains in a stable role.

Explanation

Correct Answer

D:

Because sTP instability can be secondary to physical link churn, the best response is to inspect interface faults and control-plane events before changing STP timers. A reviewer can close the technical case only after confirming that after fiber repair the port converges and remains in a stable role.

Incorrect Answers

A:

This answer would be more suitable when a VRRP backup router does not take over when the primary gateway interface is disabled, where the corrective action is to check VRRP group, interface, priority, advertisements and tracking conditions. The failure here is different: STP instability can be secondary to physical link churn. Required validation: After fiber repair the port converges and remains in a stable role.

B:

This option overlooks the decisive condition. Its supporting principle is customer control traffic must not displace the authorized provider root, while this scenario depends on sTP instability can be secondary to physical link churn. Verify the correction with: After fiber repair the port converges and remains in a stable role.

C:

Spanning tree prevents forwarding loops by selecting a loop-free active topology describes a neighboring protocol concern. In this case the controlling fact is sTP instability can be secondary to physical link churn. A correct remediation would inspect interface faults and control-plane events before changing STP timers and demonstrate: After fiber repair the port converges and remains in a stable role.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests