mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 72

Question 710

One LAG member fails silently and the service loses capacity even though the logical interface remains active. Which cause-and-remedy pairing reflects the observed problem?

  1. Root issue: VRRP provides a master and backup mechanism for a shared virtual default gateway. Correction: Review VRRP virtual router roles, priority and failover behavior.
  2. Cause: Forwarding-plane continuity does not prove control-plane routing continuity. Response: Check whether GRES is paired with the intended GR or NSR support and verify protocol state.
  3. Diagnosis: Aggregated links need operational member health monitoring and suitable capacity planning. Action: Inspect member states, traffic distribution and configured minimum link expectations.
  4. Explanation: Interarea reachability depends on the ABR's view and allowed advertisements. Repair: Inspect ABR area configuration, route export rules and summary policy.

Explanation

Correct Answer

C:

Because aggregated links need operational member health monitoring and suitable capacity planning, the best response is to inspect member states, traffic distribution and configured minimum link expectations. A reviewer can close the technical case only after confirming that the fault is visible and surviving members carry traffic within the approved limits.

Incorrect Answers

A:

Review VRRP virtual router roles, priority and failover behavior is a relevant step for the separate scenario in which two edge routers advertise one gateway service and an engineer expects both to be virtual master without a redundancy plan. It does not directly fix this case. Instead inspect member states, traffic distribution and configured minimum link expectations; verify: The fault is visible and surviving members carry traffic within the approved limits.

B:

The alternative addresses a Routing Engine switchover retains data-plane traffic briefly but causes OSPF adjacencies to restart, not the present root cause. Here the selected correction must reflect aggregated links need operational member health monitoring and suitable capacity planning. Test for: The fault is visible and surviving members carry traffic within the approved limits.

D:

This option overlooks the decisive condition. Its supporting principle is interarea reachability depends on the ABR's view and allowed advertisements, while this scenario depends on aggregated links need operational member health monitoring and suitable capacity planning. Verify the correction with: The fault is visible and surviving members carry traffic within the approved limits.

Question 711

A provider failover exposes an alternate IS-IS path that had never been tested for next-hop resolution. What operational check demonstrates that the intended outcome occurred?

  1. Acceptance check: The backup next hop resolves and carries test traffic after the primary link fails.
  2. The test confirms that the allowed prefixes are present and denied test prefixes are absent.
  3. Expected observation: The missing client receives the correct next-hop-resolvable route.
  4. Verification result: The LAN's DIS and pseudonode LSP match the documented protocol state.

Explanation

Correct Answer

A:

The selected response implements the principle that a backup path requires functional forwarding, not merely topology presence. The engineer should rehearse the failure and inspect active next hops and IS-IS route changes. Successful confirmation means: The backup next hop resolves and carries test traffic after the primary link fails.

Incorrect Answers

B:

That result would be useful for a different failure, namely: An engineer wants to filter routing information at an IS-IS boundary but applies a policy to the wrong routing context. The current case specifically calls for: Rehearse the failure and inspect active next hops and IS-IS route changes. The required observed result is: The backup next hop resolves and carries test traffic after the primary link fails.

C:

This response would target a different source scenario: A route reflector receives a new branch prefix but one iBGP client never learns it. It cannot establish the current acceptance requirement, which is: The backup next hop resolves and carries test traffic after the primary link fails. The relevant action is: Rehearse the failure and inspect active next hops and IS-IS route changes.

D:

Review current DIS election rules for the network and protocol instance is a relevant step for the separate scenario in which an IS-IS LAN elects a new DIS and the engineer assumes the result must preempt every existing elected node. It does not directly fix this case. Instead rehearse the failure and inspect active next hops and IS-IS route changes; verify: The backup next hop resolves and carries test traffic after the primary link fails.

Question 712

An engineer expects a GRE tunnel to preserve the same maximum payload size as a native Ethernet path. What assessment accurately links the fault to its correction?

  1. Explanation: OSPFv3 has protocol-specific requirements for neighbor exchange and IPv6 routing. Repair: Review the IPv6 OSPFv3 address-family and interface adjacency model.
  2. Fault mechanism: GRE by itself does not provide encryption or authenticated confidentiality. Remediation: Distinguish tunneling encapsulation from confidentiality protection.
  3. Root issue: Tunnel endpoint parameters must correspond to actual reachable interfaces. Correction: Verify configured tunnel source and destination and their active underlay routing.
  4. Cause: Encapsulation reduces effective payload MTU unless transport accommodates the extra headers. Response: Account for outer IP and GRE header overhead in the MTU design.

Explanation

Correct Answer

D:

Because encapsulation reduces effective payload MTU unless transport accommodates the extra headers, the best response is to account for outer IP and GRE header overhead in the MTU design. A reviewer can close the technical case only after confirming that a large packet test respects the effective tunnel MTU without unwanted loss.

Incorrect Answers

A:

This answer would be more suitable when an operator assumes OSPFv3 must form using the same interface and address settings as OSPFv2, where the corrective action is to review the IPv6 OSPFv3 address-family and interface adjacency model. The failure here is different: Encapsulation reduces effective payload MTU unless transport accommodates the extra headers. Required validation: A large packet test respects the effective tunnel MTU without unwanted loss.

B:

This option overlooks the decisive condition. Its supporting principle is gRE by itself does not provide encryption or authenticated confidentiality, while this scenario depends on encapsulation reduces effective payload MTU unless transport accommodates the extra headers. Verify the correction with: A large packet test respects the effective tunnel MTU without unwanted loss.

C:

Tunnel endpoint parameters must correspond to actual reachable interfaces describes a neighboring protocol concern. In this case the controlling fact is encapsulation reduces effective payload MTU unless transport accommodates the extra headers. A correct remediation would account for outer IP and GRE header overhead in the MTU design and demonstrate: A large packet test respects the effective tunnel MTU without unwanted loss.

Question 713

A GRE tunnel over an IPv4 core stops passing traffic immediately after an underlay route withdraws. Which technical distinction best describes the observed symptom?

  1. Root design issue: GRE has no independent path if its outer transport becomes unreachable.
  2. The governing rule is: Tunnel endpoint parameters must correspond to actual reachable interfaces.
  3. The key distinction is: Tunnel interfaces depend on a working underlay path between endpoints.
  4. Protocol behavior: A usable IP path need not supply a suitable MPLS LSP or labeled transport path.

Explanation

Correct Answer

A:

Underlying cause: GRE has no independent path if its outer transport becomes unreachable. Corrective action: restore underlay endpoint reachability and then validate the inner tunnel route. Verify the outcome: Both outer endpoint probes and inner traffic succeed after repair.

Incorrect Answers

B:

Verify configured tunnel source and destination and their active underlay routing is a relevant step for the separate scenario in which a GRE tunnel interface exists but its operational state is unreliable because the source interface was changed. It does not directly fix this case. Instead restore underlay endpoint reachability and then validate the inner tunnel route; verify: Both outer endpoint probes and inner traffic succeed after repair.

C:

The alternative addresses a GRE design includes a virtual tunnel interface but omits routable IPv4 underlay access to the remote endpoint, not the present root cause. Here the selected correction must reflect gRE has no independent path if its outer transport becomes unreachable. Test for: Both outer endpoint probes and inner traffic succeed after repair.

D:

This answer would be more suitable when a loopback loses its MPLS-resolvable route but ordinary IP routing to the loopback remains reachable, where the corrective action is to inspect label-switched next-hop resolution separately from generic IP reachability. The failure here is different: GRE has no independent path if its outer transport becomes unreachable. Required validation: Both outer endpoint probes and inner traffic succeed after repair.

Question 714

A policy change unexpectedly makes a backup transit provider carry most outbound traffic. What remediation is most directly applicable?

  1. Corrective action: Check the expected DR/BDR versus DROther neighbor-state relationships.
  2. Apply this control: Inspect local preference, export/import inheritance and selected BGP path attributes.
  3. Remediation: Evaluate routing-policy local preference before later BGP path-selection attributes.
  4. Recommended change: Confirm the configured local and peer AS values with the authoritative design.

Explanation

Correct Answer

B:

This is the model-intended best choice because routing policy changes can override expected primary and backup peering intent. The targeted correction is to inspect local preference, export/import inheritance and selected BGP path attributes. Validate it by observing that traffic uses the primary provider until the documented failover condition occurs.

Incorrect Answers

A:

OSPF broadcast topology reduces unnecessary full adjacency mesh formation describes a neighboring protocol concern. In this case the controlling fact is routing policy changes can override expected primary and backup peering intent. A correct remediation would inspect local preference, export/import inheritance and selected BGP path attributes and demonstrate: Traffic uses the primary provider until the documented failover condition occurs.

C:

That result would be useful for a different failure, namely: Two BGP paths have different local preferences and a technician expects the shorter AS path always to win. The current case specifically calls for: Inspect local preference, export/import inheritance and selected BGP path attributes. The required observed result is: Traffic uses the primary provider until the documented failover condition occurs.

D:

This response would target a different source scenario: A remote BGP neighbor uses a different AS number than configured and the session fails during OPEN negotiation. It cannot establish the current acceptance requirement, which is: Traffic uses the primary provider until the documented failover condition occurs. The relevant action is: Inspect local preference, export/import inheritance and selected BGP path attributes.

Question 715

A route reflector advertises routes to the wrong clients after a change in group membership. Which test result would best confirm a successful fix?

  1. The test confirms that a test prefix reaches permitted clients without cycling through reflector clusters.
  2. Expected observation: The intended inet6 family receives and selects the IPv6 prefix.
  3. Verification result: Traffic uses the primary provider until the documented failover condition occurs.
  4. Closeout evidence: A post-change route view selects the approved shortest path.

Explanation

Correct Answer

A:

The case turns on the distinction that route reflection relies on correct client boundaries and originator or cluster tracking. Apply this concrete engineering step: Review route-reflector client and cluster design, including loop-prevention attributes. An acceptable verification outcome is: A test prefix reaches permitted clients without cycling through reflector clusters.

Incorrect Answers

B:

This answer would be more suitable when a peer announces an IPv6 prefix but the operator checks only the IPv4 BGP route family, where the corrective action is to verify negotiated address families and family-specific routing tables. The failure here is different: Route reflection relies on correct client boundaries and originator or cluster tracking. Required validation: A test prefix reaches permitted clients without cycling through reflector clusters.

C:

This option overlooks the decisive condition. Its supporting principle is routing policy changes can override expected primary and backup peering intent, while this scenario depends on route reflection relies on correct client boundaries and originator or cluster tracking. Verify the correction with: A test prefix reaches permitted clients without cycling through reflector clusters.

D:

OSPF forwarding decisions depend on cumulative metric, not interface bandwidth labels alone describes a neighboring protocol concern. In this case the controlling fact is route reflection relies on correct client boundaries and originator or cluster tracking. A correct remediation would review route-reflector client and cluster design, including loop-prevention attributes and demonstrate: A test prefix reaches permitted clients without cycling through reflector clusters.

Question 716

An IPv6 packet exceeds an underlay path MTU and the operator expects intermediate IPv6 routers to fragment it. Which combined repair and acceptance criterion is strongest?

  1. Implement: Review IPv6 path MTU discovery and endpoint fragmentation requirements. Verify: The sender adapts to a validated path MTU and payload delivery succeeds.
  2. Control: Distinguish tunneling encapsulation from confidentiality protection. Accepted result: The security design adds an appropriate protected transport where needed.
  3. Action: Inspect longest-match results and forwarding routes for the specific destination. Evidence: The intended most-specific route changes to a valid next hop during failover.
  4. Repair: Confirm the IPv6 next-hop adjacency and active routing entry. Check: The IPv6 FIB resolves the intended next hop and a test packet crosses the link.

Explanation

Correct Answer

A:

This option addresses the stated case rather than another networking issue. Principle: Intermediate IPv6 routers do not perform ordinary IPv4-style fragmentation of transit packets. Remedy: Review IPv6 path MTU discovery and endpoint fragmentation requirements. Proof: The sender adapts to a validated path MTU and payload delivery succeeds.

Incorrect Answers

B:

This response would target a different source scenario: A network operator assumes a GRE tunnel encrypts customer packets merely because they are encapsulated. It cannot establish the current acceptance requirement, which is: The sender adapts to a validated path MTU and payload delivery succeeds. The relevant action is: Review IPv6 path MTU discovery and endpoint fragmentation requirements.

C:

Inspect longest-match results and forwarding routes for the specific destination is a relevant step for the separate scenario in which a new IPv6 static backup route is configured but a more-specific route points into a blackhole. It does not directly fix this case. Instead review IPv6 path MTU discovery and endpoint fragmentation requirements; verify: The sender adapts to a validated path MTU and payload delivery succeeds.

D:

The alternative addresses a router has an IPv6 default route but no usable next-hop reachability on the egress link, not the present root cause. Here the selected correction must reflect intermediate IPv6 routers do not perform ordinary IPv4-style fragmentation of transit packets. Test for: The sender adapts to a validated path MTU and payload delivery succeeds.

Question 717

A static discard route intended as a summary safety mechanism becomes the only active route after customer specifics disappear. What remediation is most directly applicable?

  1. Remediation: Document the discard behavior and determine whether the aggregate should remain advertised.
  2. Recommended change: Add a precise prefix and instance match, then inspect effective imports.
  3. Next step: Differentiate community tags from reachability and forwarding attributes.
  4. Corrective action: Review filter-based forwarding classification and the intended next-table selection.

Explanation

Correct Answer

A:

The critical observation is: A discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. Correct it by taking this action: Document the discard behavior and determine whether the aggregate should remain advertised. Confirm the outcome with: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.

Incorrect Answers

B:

Routing policy acceptance must reflect explicitly permitted destinations describes a neighboring protocol concern. In this case the controlling fact is a discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. A correct remediation would document the discard behavior and determine whether the aggregate should remain advertised and demonstrate: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.

C:

The proposed principle concerns another network fault: Communities are policy signaling metadata and not the packet-forwarding next hop themselves. Here, a discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. The most direct correction is to document the discard behavior and determine whether the aggregate should remain advertised, confirmed by loss-of-specific-route testing produces the approved withdrawal or discard outcome.

D:

That result would be useful for a different failure, namely: A router selects a route in one routing instance while the forwarding policy sends matching traffic into a different table. The current case specifically calls for: Document the discard behavior and determine whether the aggregate should remain advertised. The required observed result is: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.

Question 718

Two routers exchange IS-IS Hellos but one rejects the neighbor during area validation. Which combined repair and acceptance criterion is strongest?

  1. Repair: Measure end-to-end route choices and review configured interface metrics. Check: Traffic and route lookup follow the documented optimized path.
  2. Change: Coordinate authentication parameters and test the key change under maintenance controls. Test: Authenticated adjacency returns and no fallback to unauthenticated operation occurs.
  3. Implement: Compare NET area addresses and intended L1 or L2 adjacency mode. Verify: A protocol check shows the authorized level and matching adjacency.
  4. Control: Differentiate multiaccess DIS election from point-to-point adjacency behavior. Accepted result: A point-to-point link reaches the expected adjacency state without DIS election.

Explanation

Correct Answer

C:

Because area mismatch can affect Level 1 adjacency even when packets are received, the best response is to compare NET area addresses and intended L1 or L2 adjacency mode. A reviewer can close the technical case only after confirming that a protocol check shows the authorized level and matching adjacency.

Incorrect Answers

A:

Measure end-to-end route choices and review configured interface metrics is a relevant step for the separate scenario in which a transit operator changes IS-IS metrics on one interface and later discovers a traffic-engineering imbalance. It does not directly fix this case. Instead compare NET area addresses and intended L1 or L2 adjacency mode; verify: A protocol check shows the authorized level and matching adjacency.

B:

The alternative addresses a customer edge loses its OSPF neighbor after an authentication key rollover, not the present root cause. Here the selected correction must reflect area mismatch can affect Level 1 adjacency even when packets are received. Test for: A protocol check shows the authorized level and matching adjacency.

D:

This option overlooks the decisive condition. Its supporting principle is the IS-IS DIS concept applies to LANs rather than ordinary point-to-point links, while this scenario depends on area mismatch can affect Level 1 adjacency even when packets are received. Verify the correction with: A protocol check shows the authorized level and matching adjacency.

Question 719

A customer bridge-domain spans two isolated customers due to reusing a virtual switch without tenant boundaries. Which statement identifies the key design assumption that failed?

  1. Underlying principle: Layer 2 isolation depends on bridge-domain and logical switch boundaries.
  2. Root design issue: MAC learning reflects observed source location and may churn during loops or mobility.
  3. The governing rule is: 802.1Q VLAN identifiers have reserved values and platform constraints.
  4. The key distinction is: Per-VLAN spanning-tree behavior can differ across VLANs.

Explanation

Correct Answer

A:

The selected response implements the principle that layer 2 isolation depends on bridge-domain and logical switch boundaries. The engineer should separate customer bridge domains and validate virtual-switch membership. Successful confirmation means: A cross-customer unknown-unicast probe remains isolated from the other tenant.

Incorrect Answers

B:

That result would be useful for a different failure, namely: A carrier receives the same source MAC from two access ports and sees frequent forwarding-table moves. The current case specifically calls for: Separate customer bridge domains and validate virtual-switch membership. The required observed result is: A cross-customer unknown-unicast probe remains isolated from the other tenant.

C:

This response would target a different source scenario: A customer requests VLAN 4096 as an ordinary 802.1Q customer VLAN without checking valid tag IDs. It cannot establish the current acceptance requirement, which is: A cross-customer unknown-unicast probe remains isolated from the other tenant. The relevant action is: Separate customer bridge domains and validate virtual-switch membership.

D:

Inspect per-VLAN STP instances and configured priorities, not just a global STP summary is a relevant step for the separate scenario in which several VLANs have unexpected root placement under VSTP after port membership changes. It does not directly fix this case. Instead separate customer bridge domains and validate virtual-switch membership; verify: A cross-customer unknown-unicast probe remains isolated from the other tenant.

Question 720

A provider exports an unexpectedly broad set of routes into OSPF after accepting a generic routing policy. What diagnosis and engineering response are most appropriate?

  1. Root issue: Routing policy controls which external reachability is injected into OSPF. Correction: Constrain redistribution and test route policy acceptance for the intended prefixes.
  2. Cause: Failover paths are governed by their actual configured metrics. Response: Confirm the explicit cost plan in a failure rehearsal using route and topology outputs.
  3. Diagnosis: Multi-area OSPF design requires attention to backbone connectivity. Action: Review hierarchical OSPF backbone attachment and area border placement.
  4. Explanation: The designated system serves LAN pseudonode advertisement and election semantics. Repair: Review current DIS election rules for the network and protocol instance.

Explanation

Correct Answer

A:

This is the model-intended best choice because routing policy controls which external reachability is injected into OSPF. The targeted correction is to constrain redistribution and test route policy acceptance for the intended prefixes. Validate it by observing that only approved external prefixes appear in the OSPF domain.

Incorrect Answers

B:

This option overlooks the decisive condition. Its supporting principle is failover paths are governed by their actual configured metrics, while this scenario depends on routing policy controls which external reachability is injected into OSPF. Verify the correction with: Only approved external prefixes appear in the OSPF domain.

C:

Multi-area OSPF design requires attention to backbone connectivity describes a neighboring protocol concern. In this case the controlling fact is routing policy controls which external reachability is injected into OSPF. A correct remediation would constrain redistribution and test route policy acceptance for the intended prefixes and demonstrate: Only approved external prefixes appear in the OSPF domain.

D:

The proposed principle concerns another network fault: The designated system serves LAN pseudonode advertisement and election semantics. Here, routing policy controls which external reachability is injected into OSPF. The most direct correction is to constrain redistribution and test route policy acceptance for the intended prefixes, confirmed by only approved external prefixes appear in the OSPF domain.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests