mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 22

Question 210

An alternate uplink remains blocked after the primary path fails because expected BPDUs disappear. Which underlying Junos networking principle explains the failure?

  1. Protocol behavior: Loop protection can prevent unsafe forwarding when control-plane information is missing.
  2. Underlying principle: A redundant alternate path can remain nonforwarding until a failure changes roles.
  3. Root design issue: Protective edge-port shutdown is evidence of BPDU policy enforcement.
  4. The governing rule is: 802.1Q VLAN identifiers have reserved values and platform constraints.

Explanation

Correct Answer

A:

Because loop protection can prevent unsafe forwarding when control-plane information is missing, the best response is to inspect spanning-tree loop-protection events, root path and link state. A reviewer can close the technical case only after confirming that the corrected topology converges without opening an Ethernet loop.

Incorrect Answers

B:

The proposed principle concerns another network fault: A redundant alternate path can remain nonforwarding until a failure changes roles. Here, loop protection can prevent unsafe forwarding when control-plane information is missing. The most direct correction is to inspect spanning-tree loop-protection events, root path and link state, confirmed by the corrected topology converges without opening an Ethernet loop.

C:

That result would be useful for a different failure, namely: A customer plugs a small unmanaged switch into a protected edge port and the port disables as soon as BPDUs arrive. The current case specifically calls for: Inspect spanning-tree loop-protection events, root path and link state. The required observed result is: The corrected topology converges without opening an Ethernet loop.

D:

This response would target a different source scenario: A customer requests VLAN 4096 as an ordinary 802.1Q customer VLAN without checking valid tag IDs. It cannot establish the current acceptance requirement, which is: The corrected topology converges without opening an Ethernet loop. The relevant action is: Inspect spanning-tree loop-protection events, root path and link state.

Question 211

A static discard route intended as a summary safety mechanism becomes the only active route after customer specifics disappear. What assessment accurately links the fault to its correction?

  1. Fault mechanism: Multiple eligible forwarding next hops do not guarantee per-packet round-robin use. Remediation: Distinguish equal-cost multipath from the exact traffic-distribution algorithm used by the forwarding plane.
  2. Root issue: OSPF normally prefers the least accumulated metric to a destination. Correction: Revisit additive path cost and verify SPF outcomes across alternative links.
  3. Cause: A discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. Response: Document the discard behavior and determine whether the aggregate should remain advertised.
  4. Diagnosis: Routing policy acceptance must reflect explicitly permitted destinations. Action: Add a precise prefix and instance match, then inspect effective imports.

Explanation

Correct Answer

C:

The selected response implements the principle that a discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. The engineer should document the discard behavior and determine whether the aggregate should remain advertised. Successful confirmation means: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.

Incorrect Answers

A:

The alternative addresses two equal-cost next hops exist but a customer assumes every successive packet must alternate between links, not the present root cause. Here the selected correction must reflect a discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. Test for: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.

B:

This answer would be more suitable when a branch uses a higher OSPF interface cost but expects that branch to remain the preferred primary path, where the corrective action is to revisit additive path cost and verify SPF outcomes across alternative links. The failure here is different: A discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. Required validation: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.

D:

Routing policy acceptance must reflect explicitly permitted destinations describes a neighboring protocol concern. In this case the controlling fact is a discard summary can prevent loops but can blackhole traffic when reachability assumptions are wrong. A correct remediation would document the discard behavior and determine whether the aggregate should remain advertised and demonstrate: Loss-of-specific-route testing produces the approved withdrawal or discard outcome.

Question 212

A filter-based forwarding term matching one subscriber address also captures an overlapping shared services subnet. Which technical distinction best describes the observed symptom?

  1. The governing rule is: OSPF neighbor-state interpretation depends on multiaccess election roles.
  2. The key distinction is: Route redistribution must be intentionally scoped to prevent cross-tenant leakage.
  3. Protocol behavior: Overlapping address classification makes precise route-filter and policy terms essential.
  4. Underlying principle: Routing policy acceptance must reflect explicitly permitted destinations.

Explanation

Correct Answer

C:

This is the model-intended best choice because overlapping address classification makes precise route-filter and policy terms essential. The targeted correction is to tighten the filter match and verify the next-table lookup with explicit positive and negative examples. Validate it by observing that only the subscriber's approved traffic enters the alternate routing instance.

Incorrect Answers

A:

That result would be useful for a different failure, namely: A broadcast core VLAN has only one Full adjacency and the engineer wants to reset all routers immediately. The current case specifically calls for: Tighten the filter match and verify the next-table lookup with explicit positive and negative examples. The required observed result is: Only the subscriber's approved traffic enters the alternate routing instance.

B:

This response would target a different source scenario: A provider applies an overly broad route import policy and customer prefixes enter an unintended tenant instance. It cannot establish the current acceptance requirement, which is: Only the subscriber's approved traffic enters the alternate routing instance. The relevant action is: Tighten the filter match and verify the next-table lookup with explicit positive and negative examples.

D:

The alternative addresses a route import policy accepts more-specific destinations that should remain isolated inside a wholesale tenant, not the present root cause. Here the selected correction must reflect overlapping address classification makes precise route-filter and policy terms essential. Test for: Only the subscriber's approved traffic enters the alternate routing instance.

Question 213

A new IPv6 static backup route is configured but a more-specific route points into a blackhole. A reviewer requires a remedy and concrete test evidence. Which pairing fits?

  1. Repair: Distinguish IPv6 Neighbor Discovery from IPv4 ARP. Check: The neighbor cache resolves the IPv6 next hop and traffic passes.
  2. Change: Measure end-to-end route choices and review configured interface metrics. Test: Traffic and route lookup follow the documented optimized path.
  3. Implement: Verify tunnel protocol allowance, endpoint encapsulation and effective MTU. Verify: IPv6 test packets traverse the restored tunnel with appropriate MTU handling.
  4. Control: Inspect longest-match results and forwarding routes for the specific destination. Accepted result: The intended most-specific route changes to a valid next hop during failover.

Explanation

Correct Answer

D:

The selected response implements the principle that more-specific routes can override an otherwise healthy IPv6 fallback. The engineer should inspect longest-match results and forwarding routes for the specific destination. Successful confirmation means: The intended most-specific route changes to a valid next hop during failover.

Incorrect Answers

A:

This option overlooks the decisive condition. Its supporting principle is iPv6 link-layer neighbor resolution uses ICMPv6 Neighbor Discovery, while this scenario depends on more-specific routes can override an otherwise healthy IPv6 fallback. Verify the correction with: The intended most-specific route changes to a valid next hop during failover.

B:

IS-IS shortest-path output depends on effective metrics across the route describes a neighboring protocol concern. In this case the controlling fact is more-specific routes can override an otherwise healthy IPv6 fallback. A correct remediation would inspect longest-match results and forwarding routes for the specific destination and demonstrate: The intended most-specific route changes to a valid next hop during failover.

C:

The proposed principle concerns another network fault: Underlying endpoint reachability does not guarantee permitted encapsulated payloads. Here, more-specific routes can override an otherwise healthy IPv6 fallback. The most direct correction is to inspect longest-match results and forwarding routes for the specific destination, confirmed by the intended most-specific route changes to a valid next hop during failover.

Question 214

A virtual switch forwarding issue persists because customer VLAN configuration was changed but never committed. What should the operations engineer do first to address the stated fault?

  1. Corrective action: Compare candidate and committed configurations and confirm actual bridge membership.
  2. Apply this control: Check VRRP group, interface, priority, advertisements and tracking conditions.
  3. Remediation: Verify VLAN-to-IRB interface binding, addresses and active route entries.
  4. Recommended change: Distinguish access port traffic from trunk tagging behavior.

Explanation

Correct Answer

A:

Correct diagnosis: Junos candidate configuration changes are not active until committed. The appropriate action is: Compare candidate and committed configurations and confirm actual bridge membership. The follow-up evidence required is: The active configuration and forwarding table reflect the approved VLAN change.

Incorrect Answers

B:

The alternative addresses a VRRP backup router does not take over when the primary gateway interface is disabled, not the present root cause. Here the selected correction must reflect junos candidate configuration changes are not active until committed. Test for: The active configuration and forwarding table reflect the approved VLAN change.

C:

This answer would be more suitable when a router-on-a-stick replacement with IRB stops reachability between a bridge domain and an L3 subnet, where the corrective action is to verify VLAN-to-IRB interface binding, addresses and active route entries. The failure here is different: Junos candidate configuration changes are not active until committed. Required validation: The active configuration and forwarding table reflect the approved VLAN change.

D:

This option overlooks the decisive condition. Its supporting principle is port mode determines which customer frames are tagged or untagged at the boundary, while this scenario depends on junos candidate configuration changes are not active until committed. Verify the correction with: The active configuration and forwarding table reflect the approved VLAN change.

Question 215

An IPv6 packet exceeds an underlay path MTU and the operator expects intermediate IPv6 routers to fragment it. Which evidence would justify closing this troubleshooting case?

  1. The test confirms that a destination lookup chooses the intended most specific valid route.
  2. Expected observation: The intended most-specific route changes to a valid next hop during failover.
  3. Verification result: Both outer endpoint probes and inner traffic succeed after repair.
  4. Closeout evidence: The sender adapts to a validated path MTU and payload delivery succeeds.

Explanation

Correct Answer

D:

Underlying cause: Intermediate IPv6 routers do not perform ordinary IPv4-style fragmentation of transit packets. Corrective action: review IPv6 path MTU discovery and endpoint fragmentation requirements. Verify the outcome: The sender adapts to a validated path MTU and payload delivery succeeds.

Incorrect Answers

A:

The proposed principle concerns another network fault: IPv6 route selection follows prefix matching and route eligibility, not textual address order. Here, intermediate IPv6 routers do not perform ordinary IPv4-style fragmentation of transit packets. The most direct correction is to review IPv6 path MTU discovery and endpoint fragmentation requirements, confirmed by the sender adapts to a validated path MTU and payload delivery succeeds.

B:

That result would be useful for a different failure, namely: A new IPv6 static backup route is configured but a more-specific route points into a blackhole. The current case specifically calls for: Review IPv6 path MTU discovery and endpoint fragmentation requirements. The required observed result is: The sender adapts to a validated path MTU and payload delivery succeeds.

C:

This response would target a different source scenario: A GRE tunnel over an IPv4 core stops passing traffic immediately after an underlay route withdraws. It cannot establish the current acceptance requirement, which is: The sender adapts to a validated path MTU and payload delivery succeeds. The relevant action is: Review IPv6 path MTU discovery and endpoint fragmentation requirements.

Question 216

A provider accepts a route with its own AS in the received path after a risky bypass of loop prevention. Which evidence would justify closing this troubleshooting case?

  1. Acceptance check: An unwanted looped route is rejected in a lab before production change.
  2. The test confirms that a packet trace shows OPEN and KEEPALIVE before accepted UPDATE information.
  3. Expected observation: The selected LDP label uses a live next-hop interface after convergence.
  4. Verification result: The unauthorized more-specific is rejected while approved aggregates remain.

Explanation

Correct Answer

A:

This is the model-intended best choice because disabling loop prevention can introduce persistent interdomain routing loops. The targeted correction is to restore standard AS-path checks and review any justified exception with design authority. Validate it by observing that an unwanted looped route is rejected in a lab before production change.

Incorrect Answers

B:

This option overlooks the decisive condition. Its supporting principle is bGP message types have separate roles in session formation and reachability exchange, while this scenario depends on disabling loop prevention can introduce persistent interdomain routing loops. Verify the correction with: An unwanted looped route is rejected in a lab before production change.

C:

A stale label binding cannot compensate for unusable transport forwarding describes a neighboring protocol concern. In this case the controlling fact is disabling loop prevention can introduce persistent interdomain routing loops. A correct remediation would restore standard AS-path checks and review any justified exception with design authority and demonstrate: An unwanted looped route is rejected in a lab before production change.

D:

The proposed principle concerns another network fault: BGP edge hygiene protects the routing domain from unauthorized reachability. Here, disabling loop prevention can introduce persistent interdomain routing loops. The most direct correction is to restore standard AS-path checks and review any justified exception with design authority, confirmed by an unwanted looped route is rejected in a lab before production change.

Question 217

A customer overlay fails across an MPLS core only for one service label. Which test result would best confirm a successful fix?

  1. Closeout evidence: The label table and LSP state match the intended forwarding path.
  2. Acceptance check: The intended SR transport path forwards without unintended dependence on the retired LDP path.
  3. The test confirms that traffic uses the primary provider until the documented failover condition occurs.
  4. Expected observation: The test service label is retained and accepted at the target PE.

Explanation

Correct Answer

D:

The case turns on the distinction that a healthy transport LSP does not guarantee a correct overlay label mapping. Apply this concrete engineering step: Inspect outer transport and inner service label handling separately. An acceptable verification outcome is: The test service label is retained and accepted at the target PE.

Incorrect Answers

A:

This response would target a different source scenario: A transport route is reachable through an IP interface but the LSP still fails due to incomplete label distribution. It cannot establish the current acceptance requirement, which is: The test service label is retained and accepted at the target PE. The relevant action is: Inspect outer transport and inner service label handling separately.

B:

Check SR label advertisements, segment configuration and installed MPLS forwarding is a relevant step for the separate scenario in which a provider migrates one path from LDP to SR-MPLS but does not verify the segment-routing forwarding state. It does not directly fix this case. Instead inspect outer transport and inner service label handling separately; verify: The test service label is retained and accepted at the target PE.

C:

The alternative addresses a policy change unexpectedly makes a backup transit provider carry most outbound traffic, not the present root cause. Here the selected correction must reflect a healthy transport LSP does not guarantee a correct overlay label mapping. Test for: The test service label is retained and accepted at the target PE.

Question 218

A provider's iBGP peer receives a route but cannot resolve the external next hop in its own IGP. What implementation step and validation result should be selected?

  1. Repair: Inspect TCP reachability, permitted port 179, and authentication on the transport path. Check: An authenticated TCP session stays Established after the rule correction.
  2. Change: Review BGP next-hop reachability and explicit next-hop handling. Test: The internal peer has a valid route to the BGP next hop and installs the prefix.
  3. Implement: Distinguish an advertised inbound hint from neighboring-AS route policy decisions. Verify: A controlled route lookup confirms the neighbor's actual selected entry path.
  4. Control: Assign distinct stable router IDs and clear stale protocol state using an approved procedure. Accepted result: Each router is uniquely identified and the link-state database converges.

Explanation

Correct Answer

B:

This is the model-intended best choice because iBGP can preserve externally learned next-hop information that internal speakers must resolve. The targeted correction is to review BGP next-hop reachability and explicit next-hop handling. Validate it by observing that the internal peer has a valid route to the BGP next hop and installs the prefix.

Incorrect Answers

A:

BGP sessions require sustained TCP connectivity independent of physical interface health describes a neighboring protocol concern. In this case the controlling fact is iBGP can preserve externally learned next-hop information that internal speakers must resolve. A correct remediation would review BGP next-hop reachability and explicit next-hop handling and demonstrate: The internal peer has a valid route to the BGP next hop and installs the prefix.

C:

That result would be useful for a different failure, namely: An inbound MED is assumed to control outgoing traffic even though the receiving network has its own path-selection policies. The current case specifically calls for: Review BGP next-hop reachability and explicit next-hop handling. The required observed result is: The internal peer has a valid route to the BGP next hop and installs the prefix.

D:

This response would target a different source scenario: Two routers advertise identical OSPF router IDs and their link-state information becomes inconsistent. It cannot establish the current acceptance requirement, which is: The internal peer has a valid route to the BGP next hop and installs the prefix. The relevant action is: Review BGP next-hop reachability and explicit next-hop handling.

Question 219

A BGP peer carries IPv4 prefixes but the team assumes IPv6 prefixes are automatically shared. Which combined repair and acceptance criterion is strongest?

  1. Action: Distinguish IPv6 Neighbor Discovery from IPv4 ARP. Evidence: The neighbor cache resolves the IPv6 next hop and traffic passes.
  2. Repair: Verify tunnel protocol allowance, endpoint encapsulation and effective MTU. Check: IPv6 test packets traverse the restored tunnel with appropriate MTU handling.
  3. Change: Rehearse the failure and inspect active next hops and IS-IS route changes. Test: The backup next hop resolves and carries test traffic after the primary link fails.
  4. Implement: Enable and verify the intended IPv6 BGP family and export policy. Verify: The selected inet6 route appears on the authorized IPv6 peer.

Explanation

Correct Answer

D:

The critical observation is: BGP family negotiation and route policy control IPv6 NLRI exchange. Correct it by taking this action: Enable and verify the intended IPv6 BGP family and export policy. Confirm the outcome with: The selected inet6 route appears on the authorized IPv6 peer.

Incorrect Answers

A:

The alternative addresses a provider configures an IPv6 static route but assumes IPv4 ARP will resolve its IPv6 neighbor, not the present root cause. Here the selected correction must reflect bGP family negotiation and route policy control IPv6 NLRI exchange. Test for: The selected inet6 route appears on the authorized IPv6 peer.

B:

This answer would be more suitable when iPv6-over-IPv4 tunnel endpoints reach each other using IPv4 but IPv6 payloads fail after a firewall update, where the corrective action is to verify tunnel protocol allowance, endpoint encapsulation and effective MTU. The failure here is different: BGP family negotiation and route policy control IPv6 NLRI exchange. Required validation: The selected inet6 route appears on the authorized IPv6 peer.

C:

This option overlooks the decisive condition. Its supporting principle is a backup path requires functional forwarding, not merely topology presence, while this scenario depends on bGP family negotiation and route policy control IPv6 NLRI exchange. Verify the correction with: The selected inet6 route appears on the authorized IPv6 peer.

Question 220

An RSVP LSP needs to avoid a congested link but its path is left to ordinary unconstrained routing. What assessment accurately links the fault to its correction?

  1. Root issue: RSVP resource reservation may affect which additional constrained LSPs can be admitted. Correction: Distinguish signaling reservations from physical link speed and admission control.
  2. Cause: RSVP-TE path choice can account for configured topology constraints and resources. Response: Review explicit-path or constraint-based RSVP traffic-engineering intent.
  3. Diagnosis: Routing policy changes can override expected primary and backup peering intent. Action: Inspect local preference, export/import inheritance and selected BGP path attributes.
  4. Explanation: Incorrect label removal can expose payload handling that the egress does not expect. Repair: Verify the label action and egress handling for the intended service stack.

Explanation

Correct Answer

B:

Because rSVP-TE path choice can account for configured topology constraints and resources, the best response is to review explicit-path or constraint-based RSVP traffic-engineering intent. A reviewer can close the technical case only after confirming that the installed LSP avoids the prohibited link in a failure-free test.

Incorrect Answers

A:

That result would be useful for a different failure, namely: An engineer sees that RSVP signaling succeeded and assumes all reserved bandwidth remains available for other tunnels. The current case specifically calls for: Review explicit-path or constraint-based RSVP traffic-engineering intent. The required observed result is: The installed LSP avoids the prohibited link in a failure-free test.

C:

Inspect local preference, export/import inheritance and selected BGP path attributes is a relevant step for the separate scenario in which a policy change unexpectedly makes a backup transit provider carry most outbound traffic. It does not directly fix this case. Instead review explicit-path or constraint-based RSVP traffic-engineering intent; verify: The installed LSP avoids the prohibited link in a failure-free test.

D:

The alternative addresses an MPLS service fails after penultimate-hop popping is changed without reviewing the egress disposition, not the present root cause. Here the selected correction must reflect rSVP-TE path choice can account for configured topology constraints and resources. Test for: The installed LSP avoids the prohibited link in a failure-free test.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests