Question 190
IPv4 IS-IS routing works but IPv6 routes do not appear on a dual-stack backbone. Which protocol behavior most directly determines the correct diagnosis?
Explanation
Correct Answer
This is the model-intended best choice because iS-IS can convey multiple address families with appropriate support. The targeted correction is to check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency. Validate it by observing that both address families display their expected prefixes through the same stable topology.
Incorrect Answers
Distinguish IS-IS adjacency from address-family reachability advertisements is a relevant step for the separate scenario in which a core engineer sees that IPv6 reachability is absent despite IS-IS adjacency and concludes the adjacency itself is broken. It does not directly fix this case. Instead check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency; verify: Both address families display their expected prefixes through the same stable topology.
The alternative addresses an IS-IS route disappears after a policy update while the LSP database still contains the topology, not the present root cause. Here the selected correction must reflect iS-IS can convey multiple address families with appropriate support. Test for: Both address families display their expected prefixes through the same stable topology.
This answer would be more suitable when a router learns the same prefix from peers in distinct autonomous systems but the engineer compares only BGP hop count, where the corrective action is to trace the applicable BGP route-selection steps and local policies. The failure here is different: IS-IS can convey multiple address families with appropriate support. Required validation: Both address families display their expected prefixes through the same stable topology.