mcAfee Secure Website
exam =5
exam =6

Exam Code: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Exam Name: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Certification Provider: ISA

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers

Reliable & Actual Study Materials for IC34 ISA-IEC 62443 Cybersecurity Design Specialist Exam Success

100 Questions & Answers with Testing Engine

"IC34 ISA-IEC 62443 Cybersecurity Design Specialist: IC34 ISA-IEC 62443 Cybersecurity Design Specialist" Testing Engine covers all the knowledge points of the real ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam.

The latest actual IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers from Pass4sure. Everything you need to prepare and get best score at IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable ISA Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Test 98

Question 970

An industrial facility has this weakness: a valid process operator can edit firewall rules even though the job requires read-only trend viewing. Which adverse outcome does it create?

  1. Valid identity by itself does not justify every action
  2. Unrestricted lateral traffic undermines zone separation
  3. A capable component does not guarantee secure system integration
  4. Passive network access may disclose sensitive process information

Explanation

Correct Answer

A:

This consequence is specific to the industrial control path described. The corrective approach is to restrict allowed activities according to approved roles and duties.

Incorrect Answers

B:

It would matter for Restricted data flow; the reported weakness instead threatens that valid identity by itself does not justify every action.

C:

This failure can arise in Capability security level, for example where a supplier advertises SL-C for a controller and the integrator assumes the full plant automatically meets it. Here the direct exposure is that valid identity by itself does not justify every action.

D:

That concern does not address the immediate risk: valid identity by itself does not justify every action.

Question 971

An OT risk review finds that a facility buys certified devices but has no site-wide account management or change governance. What is the most immediate unresolved exposure?

  1. Secure hardware alone cannot sustain consistent operational protection
  2. Zone controls alone may leave inter-zone transfer exposure
  3. A single test cannot replace ongoing secure product engineering
  4. Component technical claims do not replace integration assurance

Explanation

Correct Answer

A:

The scenario exposes this outcome because part 2-1 concerns asset-owner security program responsibilities. The intended treatment is to implement an asset-owner cybersecurity program with accountable procedures.

Incorrect Answers

B:

It would matter for Conduit-specific control; the reported weakness instead threatens that secure hardware alone cannot sustain consistent operational protection.

C:

This describes the separate issue of Secure product process. For the current system, part 2-1 concerns asset-owner security program responsibilities.

D:

This failure can arise in Supplier component claims, for example where a catalog cites component requirements under ISA/IEC 62443-4-2 as evidence of sitewide compliance. Here the direct exposure is that secure hardware alone cannot sustain consistent operational protection.

Question 972

A system review identifies that several integrators keep shared PLC maintenance passwords in spreadsheets. Select TWO: a suitable action and its direct acceptance evidence.

  1. Operators see a clear remote-session indicator and can reclaim control
  2. A removed contractor cannot retrieve current maintenance secrets
  3. Use accountable credential vaulting and rotation with explicit device ownership
  4. Discover and remove or govern alternate dial-in and wireless maintenance routes

Explanation

Correct Answers

B:

The relevant step is to use accountable credential vaulting and rotation with explicit device ownership, consistent with the principle that credential governance is needed for privileged maintenance access.

C:

credential governance is needed for privileged maintenance access. Verify that a removed contractor cannot retrieve current maintenance secrets.

Incorrect Answers

A:

This observation comes from Remote screen control, a separate industrial condition. It does not prove the required result: a removed contractor cannot retrieve current maintenance secrets.

D:

That step responds to Remote access path inventory, not the reported issue. Here the relevant design principle is that credential governance is needed for privileged maintenance access.

Question 973

A plant is addressing the issue where an engineering team uses a vendor device checklist as the only system requirement set. Which evidence should its acceptance review require?

  1. Roles, change approvals, and periodic control review are demonstrably maintained
  2. The signoff describes compensating measures or remaining residual risk
  3. The owner has a distinct system test record in addition to component documentation
  4. The system test plan addresses relevant foundational categories and boundary conditions

Explanation

Correct Answer

D:

This observation tests the intended change: map applicable Part 3-3 technical requirements to the configured system. It matters because part 3-3 specifies system technical security requirements and levels.

Incorrect Answers

A:

This observation comes from Asset-owner program, a separate industrial condition. It does not prove the required result: the system test plan addresses relevant foundational categories and boundary conditions.

B:

The proposed result does not show that the system test plan addresses relevant foundational categories and boundary conditions.

C:

This check belongs to Supplier component claims. For the current issue, acceptance should establish that the system test plan addresses relevant foundational categories and boundary conditions.

Question 974

In validating the correction for a condition where a facility logs vendor VPN connection time but not which process hosts are reached, what must the engineer observe?

  1. An audit can trace one vendor session to its authorized PLC target
  2. Operators see a clear remote-session indicator and can reclaim control
  3. Only authorized signed packages pass into the SCADA maintenance area
  4. A link-loss test leaves the actuator in its approved safe operational state

Explanation

Correct Answer

A:

The relevant step is to correlate session identity with accessed endpoints and privileged actions, consistent with the principle that remote access auditing spans identity, path, and downstream actions.

Incorrect Answers

B:

This check belongs to Remote screen control. For the current issue, acceptance should establish that an audit can trace one vendor session to its authorized PLC target.

C:

The stated evidence would be appropriate for Remote file transfer. This design instead needs to show that an audit can trace one vendor session to its authorized PLC target.

D:

This observation comes from Remote-path fail-safe, a separate industrial condition. It does not prove the required result: an audit can trace one vendor session to its authorized PLC target.

Question 975

The asset owner asks how to resolve and verify this finding: a switch SPAN port drops mirrored packets because the combined source traffic exceeds its capacity. Which TWO statements belong together?

  1. A safe unauthorized write simulation generates the expected alert
  2. Use compatible industrial protocol inspection for restricted command functions
  3. Sample traffic is observed without unexplained capture loss
  4. Validate capture capacity and use supported taps or carefully scoped mirroring

Explanation

Correct Answers

C:

This check verifies the effect of the intervention rather than merely showing equipment is online. Apply the control: validate capture capacity and use supported taps or carefully scoped mirroring.

D:

monitoring visibility is constrained by sensor input and capture paths. A useful test is that sample traffic is observed without unexplained capture loss.

Incorrect Answers

A:

The stated evidence would be appropriate for Protocol-aware alert. This design instead needs to show that sample traffic is observed without unexplained capture loss.

B:

The measure is relevant when an IDS sees all Modbus TCP as normal port 502 traffic and ignores unexpected write functions, but it does not address the fact that dropped mirror traffic can conceal important events.

Question 976

For an IACS condition where a slow industrial polling session is dropped because the firewall uses an aggressive generic idle timeout, what underlying security concept applies?

  1. Management interfaces require stronger restrictions than transit traffic
  2. Industrial sessions may need carefully tuned firewall state handling
  3. Security-appliance sizing depends on enabled functions and traffic profile
  4. Redundant routes must align with firewall session state design

Explanation

Correct Answer

B:

This mechanism is the basis of the design decision. If ignored, inappropriate timers can cause intermittent process data loss.

Incorrect Answers

A:

This is relevant to Firewall management plane but does not explain the stated process issue. The correct design rationale is that industrial sessions may need carefully tuned firewall state handling.

C:

Industrial sessions may need carefully tuned firewall state handling. The option describes a different kind of control.

D:

This principle applies to Asymmetric routing, such as when redundant plant links send response traffic through a different stateful firewall with no shared state. The current case depends on the concept that industrial sessions may need carefully tuned firewall state handling.

Question 977

The asset owner asks how to resolve and verify this finding: a vendor promises five years of support but gives no security patch communication process. Which TWO statements belong together?

  1. Define patch notification, applicability, and emergency response commitments
  2. The supplier publishes testable advisories and supported version guidance
  3. Specify authenticated update controls and appropriate maintenance handling
  4. A mock report reaches the responsible supplier security team and is tracked

Explanation

Correct Answers

A:

The proposed control has a clear operational purpose: lifecycle security obligations must survive product delivery. Its acceptance evidence is that the supplier publishes testable advisories and supported version guidance.

B:

This observation tests the intended change: define patch notification, applicability, and emergency response commitments. It matters because lifecycle security obligations must survive product delivery.

Incorrect Answers

C:

That step responds to Security update mechanism, not the reported issue. Here the relevant design principle is that lifecycle security obligations must survive product delivery.

D:

This observation comes from Vulnerability disclosure, a separate industrial condition. It does not prove the required result: the supplier publishes testable advisories and supported version guidance.

Question 978

Which recorded result would establish the control is working when a wireless production link carries sensitive formulation data without suitable protection?

  1. The operator views trends but cannot modify gateway policy
  2. Separate zone records justify different safeguard requirements
  3. A tampered controller image is detected or rejected before deployment
  4. A controlled capture cannot read protected formulation values

Explanation

Correct Answer

D:

The relevant step is to select appropriate confidentiality controls consistent with the industrial protocol, consistent with the principle that foundational requirement DC addresses protection of information disclosure.

Incorrect Answers

A:

The proposed result does not show that a controlled capture cannot read protected formulation values.

B:

This observation comes from Zone-specific targets, a separate industrial condition. It does not prove the required result: a controlled capture cannot read protected formulation values.

C:

The stated evidence would be appropriate for System integrity. This design instead needs to show that a controlled capture cannot read protected formulation values.

Question 979

Which technical principle best explains the design concern where a packaging line assigns the same attack likelihood to an air-gapped cell and a vendor-connected cell?

  1. Risk likelihood depends on actual connectivity and threat pathways
  2. Target security levels should follow risk and consequence analysis
  3. Design investment should focus on consequential residual risks
  4. Risk assessments must cover supporting services and common-mode dependencies

Explanation

Correct Answer

A:

The explanation fits the system boundary and the affected process. A useful implementation step is to assess exposure and plausible access routes separately for the two cells.

Incorrect Answers

B:

Risk likelihood depends on actual connectivity and threat pathways. The option describes a different kind of control.

C:

Risk ranking calibration is a different problem; the relevant mechanism here is that risk likelihood depends on actual connectivity and threat pathways.

D:

This is relevant to Critical asset dependency but does not explain the stated process issue. The correct design rationale is that risk likelihood depends on actual connectivity and threat pathways.

Question 980

The system integrator is asked to resolve this condition: a packaged controller ships with unused web, mail, and file-sharing services enabled. Which measure should be selected?

  1. Specify approved required services and an explicit prohibition on unnecessary functions
  2. Assign test responsibility, success condition, and safe test boundary to each control
  3. Specify the applicable system, requirement set, supporting artifacts, and verification method
  4. Specify approved time sources and acceptable clock deviation

Explanation

Correct Answer

A:

functional minimization belongs in enforceable system requirements. Verify that a safe service inventory shows only approved listeners active.

Incorrect Answers

B:

The measure is relevant when a CRS lists a security control but leaves test owner and environment undefined, but it does not address the fact that superfluous services enlarge the attack surface.

C:

This measure is useful for Acceptance boundary, where a contract says comply with ISA/IEC 62443 but names no system boundary or evidence. In the present case, superfluous services enlarge the attack surface; the targeted response is different.

D:

That step responds to Time synchronization, not the reported issue. Here the relevant design principle is that functional minimization belongs in enforceable system requirements.

IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Tests