mcAfee Secure Website
exam =5
exam =6

Exam Code: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Exam Name: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Certification Provider: ISA

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers

Reliable & Actual Study Materials for IC34 ISA-IEC 62443 Cybersecurity Design Specialist Exam Success

100 Questions & Answers with Testing Engine

"IC34 ISA-IEC 62443 Cybersecurity Design Specialist: IC34 ISA-IEC 62443 Cybersecurity Design Specialist" Testing Engine covers all the knowledge points of the real ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam.

The latest actual IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers from Pass4sure. Everything you need to prepare and get best score at IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable ISA Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Test 97

Question 960

Which TWO choices form a sound engineering response and acceptance check for a situation where a control-system backup job reports success but no restored HMI has been tested?

  1. Recovered runtime and configuration meet the agreed restoration criteria
  2. Perform an authorized test restoration on a representative system
  3. The exception is tracked and the retest or risk approval is documented
  4. Test the approved single-node failure under representative traffic

Explanation

Correct Answers

A:

This check verifies the effect of the intervention rather than merely showing equipment is online. Apply the control: perform an authorized test restoration on a representative system.

B:

recoverability is demonstrated through restoration, not job completion alone. A useful test is that recovered runtime and configuration meet the agreed restoration criteria.

Incorrect Answers

C:

This observation comes from Test defect disposition, a separate industrial condition. It does not prove the required result: recovered runtime and configuration meet the agreed restoration criteria.

D:

That step responds to Failover during security control loss, not the reported issue. Here the relevant design principle is that recoverability is demonstrated through restoration, not job completion alone.

Question 961

The plant team discovers that a terminated vendor's authentication token remains cached on a jump host after account disablement. What should be changed first in the security design?

  1. Require production-state and safe-window checks before enabling privileged commands
  2. Make remote-control state visible and subject to safe local override
  3. Invalidate active tokens and close existing sessions when revoking access
  4. Correlate session identity with accessed endpoints and privileged actions

Explanation

Correct Answer

C:

revocation processes must cover both future and current sessions. A useful test is that account disablement immediately ends the old session and blocks reentry.

Incorrect Answers

A:

That step responds to Maintenance window safety, not the reported issue. Here the relevant design principle is that revocation processes must cover both future and current sessions.

B:

The measure is relevant when a diagnostics contractor can operate the HMI remotely while the local panel lacks session indication, but it does not address the fact that cached tokens can sustain access after central revocation.

D:

This measure is useful for Supplier access auditing, where a facility logs vendor VPN connection time but not which process hosts are reached. In the present case, cached tokens can sustain access after central revocation; the targeted response is different.

Question 962

An industrial facility has this weakness: a security gateway is sized only by nominal throughput and fails under realistic deep inspection. Which adverse outcome does it create?

  1. Failed upgrades may leave no trusted return configuration
  2. Untrusted hosts could attempt to change security policy
  3. Unplanned multicast blocks or floods can disrupt process communications
  4. Underpowered inspection can introduce plant communication delays

Explanation

Correct Answer

D:

This is the relevant failure mode for the described process. security-appliance sizing depends on enabled functions and traffic profile. Reduce exposure by taking this step: test enabled industrial protocol inspection with peak session and traffic load.

Incorrect Answers

A:

It would matter for Firewall configuration backup; the reported weakness instead threatens that underpowered inspection can introduce plant communication delays.

B:

This describes the separate issue of Firewall management plane. For the current system, security-appliance sizing depends on enabled functions and traffic profile.

C:

This failure can arise in Industrial multicast flow, for example where a process-control network needs multicast status messages but the new firewall drops all multicast traffic. Here the direct exposure is that underpowered inspection can introduce plant communication delays.

Question 963

In an industrial controls project, an industrial DMZ has firewalls on both sides configured by the same shared administrator account. Which recommendation is most appropriate?

  1. Time-limit the exception and require approved review plus expiry
  2. Validate required control flows and latency in a lab before production insertion
  3. Separate administrative scope and approved change controls where practical
  4. Restrict the conduit to approved read-only data collection endpoints

Explanation

Correct Answer

C:

defense in depth includes administrative independence, not just two devices. Verify that an office administrator cannot unilaterally permit PLC-zone access.

Incorrect Answers

A:

That step responds to Policy change approval, not the reported issue. Here the relevant design principle is that defense in depth includes administrative independence, not just two devices.

B:

Safe commissioning sequence is a separate issue; in this design, defense in depth includes administrative independence, not just two devices.

D:

This measure is useful for Read-only historian flow, where office dashboards need plant metrics but must not command field equipment. In the present case, shared administration can undermine separation between boundaries; the targeted response is different.

Question 964

Which risk should the designer prioritize in this scenario: a turbine safety shutdown relies on a time source hosted on an unprotected office server?

  1. Unassessed remote assets can become paths to critical process functions
  2. Unmodeled pivots can bypass a seemingly segmented architecture
  3. A seemingly ancillary shared service can undermine critical safety functions
  4. Generic threat labels may not produce testable security controls

Explanation

Correct Answer

C:

The risk follows directly from the present design gap. A targeted safeguard is to assess the cross-boundary time-service dependency and design an appropriate resilient source; verify that a test isolates the office network without disrupting required turbine event sequencing.

Incorrect Answers

A:

It would matter for Assessment boundary; the reported weakness instead threatens that a seemingly ancillary shared service can undermine critical safety functions.

B:

This failure can arise in Attack path review, for example where a refinery firewall permits a contractor laptop to route indirectly into an independent burner controller. Here the direct exposure is that a seemingly ancillary shared service can undermine critical safety functions.

D:

That concern does not address the immediate risk: a seemingly ancillary shared service can undermine critical safety functions.

Question 965

Which recorded result would establish the control is working when a grid gateway is expected to record configuration changes but no log retention period is stated?

  1. A sampled change event is available with actor and trusted timestamp
  2. The signed CRS lists who may authorize supplier connections
  3. A restore test achieves the agreed time and data-freshness criteria
  4. A login test distinguishes an authorized operator from a former employee

Explanation

Correct Answer

A:

This observation tests the intended change: specify event fields, clock synchronization, retention, and reader access in the CRS. It matters because logging requirements include availability and integrity of evidence.

Incorrect Answers

B:

The proposed result does not show that a sampled change event is available with actor and trusted timestamp.

C:

This check belongs to System recovery. For the current issue, acceptance should establish that a sampled change event is available with actor and trusted timestamp.

D:

The stated evidence would be appropriate for Authentication requirement. This design instead needs to show that a sampled change event is available with actor and trusted timestamp.

Question 966

A commissioning team sees that a firewall's configuration web UI is reachable from the same untrusted subnet it filters. Which TWO choices specify a control and an observable result?

  1. Validate required control flows and latency in a lab before production insertion
  2. Only privileged maintenance hosts can reach configuration services
  3. Move administration to a controlled management network with accountable roles
  4. A reviewer can justify or remove every sample rule without guessing

Explanation

Correct Answers

B:

This check verifies the effect of the intervention rather than merely showing equipment is online. Apply the control: move administration to a controlled management network with accountable roles.

C:

management interfaces require stronger restrictions than transit traffic. A useful test is that only privileged maintenance hosts can reach configuration services.

Incorrect Answers

A:

Safe commissioning sequence is a separate issue; in this design, management interfaces require stronger restrictions than transit traffic.

D:

This check belongs to Boundary rule documentation. For the current issue, acceptance should establish that only privileged maintenance hosts can reach configuration services.

Question 967

Which recorded result would establish the control is working when a firewall is upgraded without saving the active policy and interface mapping?

  1. The legitimate polling transaction completes without allowing unrelated traffic
  2. A programming request from the historian subnet is rejected and logged
  3. The prechange rules can be restored and verified in a controlled test
  4. Approved receivers obtain status while other zones do not receive the stream

Explanation

Correct Answer

C:

This check verifies the effect of the intervention rather than merely showing equipment is online. Apply the control: export a protected configuration and rehearse supported rollback steps.

Incorrect Answers

A:

The proposed result does not show that the prechange rules can be restored and verified in a controlled test.

B:

This observation comes from Firewall test negative cases, a separate industrial condition. It does not prove the required result: the prechange rules can be restored and verified in a controlled test.

D:

This check belongs to Industrial multicast flow. For the current issue, acceptance should establish that the prechange rules can be restored and verified in a controlled test.

Question 968

An engineer examines why an external integrator's account remains active long after the commissioning contract ends. Which statement most accurately explains the design issue?

  1. Supplier access rights should follow contract and task lifecycle
  2. Remote access auditing spans identity, path, and downstream actions
  3. Human-machine coordination is necessary for safe remote operation
  4. Credential governance is needed for privileged maintenance access

Explanation

Correct Answer

A:

The principle connects the observed design defect with a practical intervention: automate expiration and periodic recertification of supplier identities. The corresponding hazard is that orphaned third-party accounts can be abused later.

Incorrect Answers

B:

This is relevant to Supplier access auditing but does not explain the stated process issue. The correct design rationale is that supplier access rights should follow contract and task lifecycle.

C:

Remote screen control is a different problem; the relevant mechanism here is that supplier access rights should follow contract and task lifecycle.

D:

This principle applies to Password vault use, such as when several integrators keep shared PLC maintenance passwords in spreadsheets. The current case depends on the concept that supplier access rights should follow contract and task lifecycle.

Question 969

An industrial project must address this condition: an antivirus product quarantines live DCS runtime files because industrial vendor exclusions were not reviewed. Which TWO selections pair the control and its verification?

  1. Protection operates without blocking validated runtime processes
  2. Create vendor-approved application control and tested scanning exclusions
  3. Disable or filter unnecessary configuration services and interfaces
  4. An unauthorized test executable is prevented while approved control software starts

Explanation

Correct Answers

A:

The acceptance result directly demonstrates the requirement has been met. The enabling measure is to create vendor-approved application control and tested scanning exclusions; endpoint controls need process-compatible configuration.

B:

This change addresses the stated weakness because endpoint controls need process-compatible configuration. Confirm the result by checking that protection operates without blocking validated runtime processes.

Incorrect Answers

C:

Unneeded industrial ports is a separate issue; in this design, endpoint controls need process-compatible configuration.

D:

This check belongs to Application allowlisting. For the current issue, acceptance should establish that protection operates without blocking validated runtime processes.

Question 970

An industrial facility has this weakness: a valid process operator can edit firewall rules even though the job requires read-only trend viewing. Which adverse outcome does it create?

  1. Valid identity by itself does not justify every action
  2. Unrestricted lateral traffic undermines zone separation
  3. A capable component does not guarantee secure system integration
  4. Passive network access may disclose sensitive process information

Explanation

Correct Answer

A:

This consequence is specific to the industrial control path described. The corrective approach is to restrict allowed activities according to approved roles and duties.

Incorrect Answers

B:

It would matter for Restricted data flow; the reported weakness instead threatens that valid identity by itself does not justify every action.

C:

This failure can arise in Capability security level, for example where a supplier advertises SL-C for a controller and the integrator assumes the full plant automatically meets it. Here the direct exposure is that valid identity by itself does not justify every action.

D:

That concern does not address the immediate risk: valid identity by itself does not justify every action.

IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Tests