mcAfee Secure Website
exam =5
exam =6

Exam Code: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Exam Name: IC34 ISA-IEC 62443 Cybersecurity Design Specialist

Certification Provider: ISA

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers

Reliable & Actual Study Materials for IC34 ISA-IEC 62443 Cybersecurity Design Specialist Exam Success

100 Questions & Answers with Testing Engine

"IC34 ISA-IEC 62443 Cybersecurity Design Specialist: IC34 ISA-IEC 62443 Cybersecurity Design Specialist" Testing Engine covers all the knowledge points of the real ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam.

The latest actual IC34 ISA-IEC 62443 Cybersecurity Design Specialist Questions & Answers from Pass4sure. Everything you need to prepare and get best score at IC34 ISA-IEC 62443 Cybersecurity Design Specialist exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable ISA Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

ISA IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Test 33

Question 320

A plant is addressing the issue where an antivirus product quarantines live DCS runtime files because industrial vendor exclusions were not reviewed. Which evidence should its acceptance review require?

  1. A routine user can observe process state but cannot install software
  2. Every emergency login is attributable and triggers review
  3. An unauthorized test executable is prevented while approved control software starts
  4. Protection operates without blocking validated runtime processes

Explanation

Correct Answer

D:

This observation tests the intended change: create vendor-approved application control and tested scanning exclusions. It matters because endpoint controls need process-compatible configuration.

Incorrect Answers

A:

This check belongs to Workstation least privilege. For the current issue, acceptance should establish that protection operates without blocking validated runtime processes.

B:

The stated evidence would be appropriate for Remote maintenance accounts. This design instead needs to show that protection operates without blocking validated runtime processes.

C:

This observation comes from Application allowlisting, a separate industrial condition. It does not prove the required result: protection operates without blocking validated runtime processes.

Question 321

A system review identifies that a gateway contains a third-party library but the supplier has no dependency record. Select TWO: a suitable action and its direct acceptance evidence.

  1. Request an appropriate software component inventory and vulnerability response procedure
  2. A known library issue can be traced to affected delivered gateway versions
  3. A freshly reset unit requires authorized unique credential setup before remote use
  4. Create an explicit security design verification gate before release

Explanation

Correct Answers

A:

software dependency visibility supports supplier vulnerability management. Verify that a known library issue can be traced to affected delivered gateway versions.

B:

The relevant step is to request an appropriate software component inventory and vulnerability response procedure, consistent with the principle that software dependency visibility supports supplier vulnerability management.

Incorrect Answers

C:

This check belongs to Default-secure delivery. For the current issue, acceptance should establish that a known library issue can be traced to affected delivered gateway versions.

D:

Design verification gate is a separate issue; in this design, software dependency visibility supports supplier vulnerability management.

Question 322

For a plant where a procurement specification accepts a controller using its published factory password permanently, which TWO responses give both the remedy and proof it worked? Select TWO.

  1. Require removal or disabling of defaults and secure initial credential provisioning
  2. Commissioning proves the vendor default cannot authenticate
  3. Record zone- and conduit-specific target levels and supporting control requirements
  4. Cross-cell test events align within the approved timing tolerance

Explanation

Correct Answers

A:

This change addresses the stated weakness because secure baseline requirements address factory commissioning states. Confirm the result by checking that commissioning proves the vendor default cannot authenticate.

B:

The acceptance result directly demonstrates the requirement has been met. The enabling measure is to require removal or disabling of defaults and secure initial credential provisioning; secure baseline requirements address factory commissioning states.

Incorrect Answers

C:

The measure is relevant when a CRS declares one security level for an entire multi-zone plant without risk justification, but it does not address the fact that known defaults can expose otherwise isolated controllers.

D:

The stated evidence would be appropriate for Time synchronization. This design instead needs to show that commissioning proves the vendor default cannot authenticate.

Question 323

What is the clearest security consequence when a contract says comply with ISA/IEC 62443 but names no system boundary or evidence?

  1. Known defaults can expose otherwise isolated controllers
  2. Superfluous services enlarge the attack surface
  3. Uncontrolled requirement edits can invalidate prior design acceptance
  4. An undefined compliance statement creates disputed and untestable promises

Explanation

Correct Answer

D:

The unmitigated condition can produce this failure; test remediation by confirming that acceptance reviewers can test exactly the agreed scope without assumptions.

Incorrect Answers

A:

This describes the separate issue of Default credentials. For the current system, standards references must be translated into scoped contractual requirements.

B:

That concern does not address the immediate risk: an undefined compliance statement creates disputed and untestable promises.

C:

It would matter for Requirements change control; the reported weakness instead threatens that an undefined compliance statement creates disputed and untestable promises.

Question 324

A plant is addressing the issue where an asset owner buys smart motor drives without asking about security update support. Which evidence should its acceptance review require?

  1. A comparison confirms each HMI matches the approved release settings
  2. The accepted supplier response identifies supported security functions and update process
  3. The matrix identifies native functions and compensating system controls
  4. Design review catches an insecure service before final hardware assembly

Explanation

Correct Answer

B:

The evidence links the outcome to the security mechanism: security capability must be checked before supplier selection. The corresponding design step is to specify supported authentication, update, logging, and lifecycle obligations in procurement.

Incorrect Answers

A:

The stated evidence would be appropriate for Configuration baseline. This design instead needs to show that the accepted supplier response identifies supported security functions and update process.

C:

The proposed result does not show that the accepted supplier response identifies supported security functions and update process.

D:

This observation comes from Secure lifecycle planning, a separate industrial condition. It does not prove the required result: the accepted supplier response identifies supported security functions and update process.

Question 325

What is the clearest security consequence when a plant's SL-A evidence predates addition of a new cloud remote-access conduit?

  1. Previously achieved assurance can become stale after system modifications
  2. A target number does not automatically establish implemented capability
  3. Confusing risk analysis with security control specification weakens design basis
  4. Narrow testing can hide major gaps in other categories

Explanation

Correct Answer

A:

The scenario exposes this outcome because security level evidence has a scope and revision context. The intended treatment is to reevaluate affected security-level claims after material topology changes.

Incorrect Answers

B:

This failure can arise in Target-versus-achieved gap, for example where a remote substation has a high SL-T but its installed gateways cannot meet required authentication controls. Here the direct exposure is that previously achieved assurance can become stale after system modifications.

C:

That concern does not address the immediate risk: previously achieved assurance can become stale after system modifications.

D:

It would matter for Security level verification; the reported weakness instead threatens that previously achieved assurance can become stale after system modifications.

Question 326

In validating the correction for a condition where an assessment covers the central SCADA server but excludes remote pump PLCs connected by radio, what must the engineer observe?

  1. The revised risk record changes the protection priority for the dosing controller
  2. The connected cell receives explicit controls for its additional remote entry route
  3. Every reachable pump PLC and radio conduit appears in the reviewed system diagram
  4. The approved decision records treatment, owner, and residual-risk rationale

Explanation

Correct Answer

C:

This check verifies the effect of the intervention rather than merely showing equipment is online. Apply the control: expand the system-under-consideration boundary to include reachable remote assets and links.

Incorrect Answers

A:

The proposed result does not show that every reachable pump PLC and radio conduit appears in the reviewed system diagram.

B:

This check belongs to Likelihood context. For the current issue, acceptance should establish that every reachable pump PLC and radio conduit appears in the reviewed system diagram.

D:

The stated evidence would be appropriate for Tolerance decision. This design instead needs to show that every reachable pump PLC and radio conduit appears in the reviewed system diagram.

Question 327

Once controls have been implemented for a situation where a maintenance tunnel stays active indefinitely after the vendor finishes work, which outcome confirms the intended behavior?

  1. The technician can service the assigned skid but not the turbine controllers
  2. Reviewers can identify operator, target, window, and approved actions
  3. The access window closes and no tunnel persists after the approved period
  4. One revoked technician fails remote authentication while authorized support continues

Explanation

Correct Answer

C:

This check verifies the effect of the intervention rather than merely showing equipment is online. Apply the control: require explicit start approvals, expiration, and automatic termination.

Incorrect Answers

A:

This observation comes from Vendor least privilege, a separate industrial condition. It does not prove the required result: the access window closes and no tunnel persists after the approved period.

B:

The proposed result does not show that the access window closes and no tunnel persists after the approved period.

D:

The stated evidence would be appropriate for Vendor MFA. This design instead needs to show that the access window closes and no tunnel persists after the approved period.

Question 328

Which test result would most directly verify a fix for this condition: a production historian is queried directly from Internet-facing corporate applications?

  1. Plant control nodes accept no direct sessions from public or office-facing endpoints
  2. An external modem-admin account cannot command the pump controller
  3. A test confirms business clients cannot initiate arbitrary PLC sessions
  4. Zone documents justify common trust and permitted interactions

Explanation

Correct Answer

A:

The acceptance result directly demonstrates the requirement has been met. The enabling measure is to use an industrial DMZ or appropriately separated intermediary for approved data exchange; a DMZ mediates data exchange between different trust domains.

Incorrect Answers

B:

The stated evidence would be appropriate for Remote field site. This design instead needs to show that plant control nodes accept no direct sessions from public or office-facing endpoints.

C:

The proposed result does not show that plant control nodes accept no direct sessions from public or office-facing endpoints.

D:

This check belongs to Zone grouping. For the current issue, acceptance should establish that plant control nodes accept no direct sessions from public or office-facing endpoints.

Question 329

The asset owner asks how to resolve and verify this finding: a control-room HMI allows generic accounts but the CRS only requires a password field. Which TWO statements belong together?

  1. Obtain approval of access requirements from the asset owner's accountable team
  2. Specify accountable user identity and suitable authentication strength for its role
  3. Handover includes an approved reproducible firewall policy package
  4. A login test distinguishes an authorized operator from a former employee

Explanation

Correct Answers

B:

The proposed control has a clear operational purpose: identification and authentication are distinct from granting permissions. Its acceptance evidence is that a login test distinguishes an authorized operator from a former employee.

D:

This observation tests the intended change: specify accountable user identity and suitable authentication strength for its role. It matters because identification and authentication are distinct from granting permissions.

Incorrect Answers

A:

Asset-owner signoff is a separate issue; in this design, identification and authentication are distinct from granting permissions.

C:

This check belongs to Supplier deliverable. For the current issue, acceptance should establish that a login test distinguishes an authorized operator from a former employee.

Question 330

For the case where a pulp mill adds an IIoT gateway after the system risk assessment is approved, what is the clearest acceptance check?

  1. The risk action closes only after accountable ownership and evidence are recorded
  2. The updated inventory and risk register include the gateway's traffic and external peers
  3. The plan documents interim controls and a safe upgrade window
  4. The design restricts switching commands more strongly than passive measurements

Explanation

Correct Answer

B:

The evidence links the outcome to the security mechanism: risk assessment is revisited for material architecture changes. The corresponding design step is to reassess the new trust boundary and update the architecture before gateway commissioning.

Incorrect Answers

A:

This check belongs to Risk treatment ownership. For the current issue, acceptance should establish that the updated inventory and risk register include the gateway's traffic and external peers.

C:

This observation comes from Outage window tradeoff, a separate industrial condition. It does not prove the required result: the updated inventory and risk register include the gateway's traffic and external peers.

D:

The stated evidence would be appropriate for Conduit consequence. This design instead needs to show that the updated inventory and risk register include the gateway's traffic and external peers.

IC34 ISA-IEC 62443 Cybersecurity Design Specialist Practice Tests