mcAfee Secure Website
exam =5
exam =6

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Reliable & Actual Study Materials for NSE4_FGT_AD-7.6 Exam Success

94 Questions & Answers with Testing Engine

"NSE4_FGT_AD-7.6: Fortinet NSE 4 - FortiOS 7.6 Administrator" Testing Engine covers all the knowledge points of the real Fortinet NSE4_FGT_AD-7.6 exam.

The latest actual NSE4_FGT_AD-7.6 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NSE4_FGT_AD-7.6 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Fortinet Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 59

Question 580

A security operations center correlates VPN packet captures and debug logs. The administrator observes that a VPN denial is blamed on FortiGuard web filtering without any web-filter evidence. Which diagnostic step best resolves the uncertainty?

  1. Inspect matching policy, routes and Phase 2 selector coverage
  2. Capture UDP 500/4500 on the local interface and verify upstream filtering
  3. Correlate tunnel, firewall policy and UTM log stages for the packet
  4. Verify remote decrypt counters and reverse policies/routes

Explanation

Correct Answer

C:

Correlate tunnel, firewall policy and UTM log stages for the packet is the best response. Encryption, forwarding and content inspection can fail at different stages.

Incorrect Answers

A:

Inspect matching policy, routes and Phase 2 selector coverage is relevant when IKE up events are present but ESP packet counters never increment on user access. An established SA may remain idle if protected traffic is routed elsewhere or denied.

B:

Capture UDP 500/4500 on the local interface and verify upstream filtering is useful when traffic reaches the IPsec WAN port but IKE packets are denied upstream. IKE and NAT-T control-plane reachability is necessary before negotiation.

D:

Verify remote decrypt counters and reverse policies/routes is relevant when encrypt counters grow but the peer's return traffic never appears. A one-direction flow usually implicates remote forwarding or reply selection.

Question 581

A partner VPN uses dynamic public addresses and changing remote gateways. A post-change test indicates that the branch public address changes after ISP reconnection and the hub still expects a static endpoint. Which control most directly addresses the observed gap?

  1. Scope hub firewall rules to the approved partner networks and services
  2. Install appropriate protected-prefix routes or supported dynamic routing for that branch
  3. Use a supported dial-up/dynamic peer IKE design at the hub
  4. Require appropriate peer authentication and scoped access policies

Explanation

Correct Answer

C:

Choose use a supported dial-up/dynamic peer IKE design at the hub. Dynamic peers cannot be reliably identified by an obsolete fixed gateway IP. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Scope hub firewall rules to the approved partner networks and services is relevant when a hub accepts a new remote connection but traffic is allowed to every internal subnet. Establishing an IKE SA does not grant broad authorization to internal applications.

B:

Install appropriate protected-prefix routes or supported dynamic routing for that branch is useful when a dynamic branch can establish IKE but its private subnet is not advertised to the hub routing table. Dial-up negotiation does not automatically establish all application routes.

D:

Require appropriate peer authentication and scoped access policies is relevant when the hub's dial-up configuration accepts unapproved identities from any internet origin. A dynamic remote IP must not imply that any unauthenticated client can form a trusted VPN.

Question 582

A partner VPN uses dynamic public addresses and changing remote gateways. The team reports that two remote partners share NAT egress and connect to one hub. Which response is most effective for this case?

  1. Use a supported dial-up/dynamic peer IKE design at the hub
  2. Require appropriate peer authentication and scoped access policies
  3. Install appropriate protected-prefix routes or supported dynamic routing for that branch
  4. Configure distinct supported peer identifiers and matched tunnel definitions

Explanation

Correct Answer

D:

The appropriate control is to configure distinct supported peer identifiers and matched tunnel definitions. Hub identity matching must distinguish peers that appear behind one address.

Incorrect Answers

A:

Use a supported dial-up/dynamic peer IKE design at the hub is useful when the branch public address changes after ISP reconnection and the hub still expects a static endpoint. Dynamic peers cannot be reliably identified by an obsolete fixed gateway IP.

B:

Require appropriate peer authentication and scoped access policies addresses a different symptom: the hub's dial-up configuration accepts unapproved identities from any internet origin. A dynamic remote IP must not imply that any unauthenticated client can form a trusted VPN.

C:

Install appropriate protected-prefix routes or supported dynamic routing for that branch is relevant when a dynamic branch can establish IKE but its private subnet is not advertised to the hub routing table. Dial-up negotiation does not automatically establish all application routes.

Question 583

A partner VPN uses dynamic public addresses and changing remote gateways. In the effective configuration, the hub's dial-up configuration accepts unapproved identities from any internet origin. What should the administrator do to address the stated condition?

  1. Configure distinct supported peer identifiers and matched tunnel definitions
  2. Use a supported dial-up/dynamic peer IKE design at the hub
  3. Require appropriate peer authentication and scoped access policies
  4. Install appropriate protected-prefix routes or supported dynamic routing for that branch

Explanation

Correct Answer

C:

Require appropriate peer authentication and scoped access policies directly addresses the requirement. A dynamic remote IP must not imply that any unauthenticated client can form a trusted VPN.

Incorrect Answers

A:

Configure distinct supported peer identifiers and matched tunnel definitions addresses a different symptom: two remote partners share NAT egress and connect to one hub. Hub identity matching must distinguish peers that appear behind one address.

B:

Use a supported dial-up/dynamic peer IKE design at the hub is relevant when the branch public address changes after ISP reconnection and the hub still expects a static endpoint. Dynamic peers cannot be reliably identified by an obsolete fixed gateway IP.

D:

Install appropriate protected-prefix routes or supported dynamic routing for that branch addresses a different symptom: a dynamic branch can establish IKE but its private subnet is not advertised to the hub routing table. Dial-up negotiation does not automatically establish all application routes.

Question 584

A partner VPN uses dynamic public addresses and changing remote gateways. The current operating problem is that a dynamic branch can establish IKE but its private subnet is not advertised to the hub routing table. Which action best meets the stated requirement?

  1. Configure distinct supported peer identifiers and matched tunnel definitions
  2. Install appropriate protected-prefix routes or supported dynamic routing for that branch
  3. Use a supported dial-up/dynamic peer IKE design at the hub
  4. Require appropriate peer authentication and scoped access policies

Explanation

Correct Answer

B:

Install appropriate protected-prefix routes or supported dynamic routing for that branch is the best response. Dial-up negotiation does not automatically establish all application routes.

Incorrect Answers

A:

Configure distinct supported peer identifiers and matched tunnel definitions is relevant when two remote partners share NAT egress and connect to one hub. Hub identity matching must distinguish peers that appear behind one address.

C:

Use a supported dial-up/dynamic peer IKE design at the hub addresses a different symptom: the branch public address changes after ISP reconnection and the hub still expects a static endpoint. Dynamic peers cannot be reliably identified by an obsolete fixed gateway IP.

D:

Require appropriate peer authentication and scoped access policies is relevant when the hub's dial-up configuration accepts unapproved identities from any internet origin. A dynamic remote IP must not imply that any unauthenticated client can form a trusted VPN.

Question 585

A partner VPN uses dynamic public addresses and changing remote gateways. An incident review establishes that a hub accepts a new remote connection but traffic is allowed to every internal subnet. What is the most appropriate next step?

  1. Scope hub firewall rules to the approved partner networks and services
  2. Configure distinct supported peer identifiers and matched tunnel definitions
  3. Install appropriate protected-prefix routes or supported dynamic routing for that branch
  4. Require appropriate peer authentication and scoped access policies

Explanation

Correct Answer

A:

Choose scope hub firewall rules to the approved partner networks and services. Establishing an IKE SA does not grant broad authorization to internal applications.

Incorrect Answers

B:

Configure distinct supported peer identifiers and matched tunnel definitions addresses a different symptom: two remote partners share NAT egress and connect to one hub. Hub identity matching must distinguish peers that appear behind one address.

C:

Install appropriate protected-prefix routes or supported dynamic routing for that branch is relevant when a dynamic branch can establish IKE but its private subnet is not advertised to the hub routing table. Dial-up negotiation does not automatically establish all application routes.

D:

Require appropriate peer authentication and scoped access policies is useful when the hub's dial-up configuration accepts unapproved identities from any internet origin. A dynamic remote IP must not imply that any unauthenticated client can form a trusted VPN.

Question 586

A network designer handles overlapping RFC1918 networks across an IPsec tunnel. The observed symptom is that both sites use 10.10.10.0/24 and normal routes cannot distinguish their hosts. Which response is most effective for this case?

  1. Use an approved one-to-one translation or network renumbering strategy
  2. Update reverse routing toward the translated network that the peer can reach
  3. Make selector configuration agree with the addresses after the approved NAT strategy
  4. Preserve original and post-NAT session tuples in VPN incident evidence

Explanation

Correct Answer

A:

The appropriate control is to use an approved one-to-one translation or network renumbering strategy. Overlapping addresses need distinct partner-visible prefixes for unambiguous traffic.

Incorrect Answers

B:

Update reverse routing toward the translated network that the peer can reach addresses a different symptom: a partner sees one translation prefix but the return route points to original inside addresses. Reply paths must use the destination space visible to the partner.

C:

Make selector configuration agree with the addresses after the approved NAT strategy is relevant when tunnel selectors cover the untranslated network but the traffic policy changes source addresses. Protected traffic matching must reflect the real packet addressing at encryption time.

D:

Preserve original and post-NAT session tuples in VPN incident evidence is useful when logs show only the translated source and investigators cannot identify a compromised original host. Translation attribution requires mapping the visible peer address back to the local client.

Question 587

A network designer handles overlapping RFC1918 networks across an IPsec tunnel. A post-change test indicates that tunnel selectors cover the untranslated network but the traffic policy changes source addresses. What should the administrator do to address the stated condition?

  1. Make selector configuration agree with the addresses after the approved NAT strategy
  2. Use an approved one-to-one translation or network renumbering strategy
  3. Update reverse routing toward the translated network that the peer can reach
  4. Preserve original and post-NAT session tuples in VPN incident evidence

Explanation

Correct Answer

A:

Make selector configuration agree with the addresses after the approved NAT strategy directly addresses the requirement. Protected traffic matching must reflect the real packet addressing at encryption time.

Incorrect Answers

B:

Use an approved one-to-one translation or network renumbering strategy is relevant when both sites use 10.10.10.0/24 and normal routes cannot distinguish their hosts. Overlapping addresses need distinct partner-visible prefixes for unambiguous traffic.

C:

Update reverse routing toward the translated network that the peer can reach is useful when a partner sees one translation prefix but the return route points to original inside addresses. Reply paths must use the destination space visible to the partner.

D:

Preserve original and post-NAT session tuples in VPN incident evidence addresses a different symptom: logs show only the translated source and investigators cannot identify a compromised original host. Translation attribution requires mapping the visible peer address back to the local client.

Question 588

A network designer handles overlapping RFC1918 networks across an IPsec tunnel. The team reports that a partner sees one translation prefix but the return route points to original inside addresses. Which action best meets the stated requirement?

  1. Update reverse routing toward the translated network that the peer can reach
  2. Make selector configuration agree with the addresses after the approved NAT strategy
  3. Use an approved one-to-one translation or network renumbering strategy
  4. Preserve original and post-NAT session tuples in VPN incident evidence

Explanation

Correct Answer

A:

Update reverse routing toward the translated network that the peer can reach is the best response. Reply paths must use the destination space visible to the partner.

Incorrect Answers

B:

Make selector configuration agree with the addresses after the approved NAT strategy is useful when tunnel selectors cover the untranslated network but the traffic policy changes source addresses. Protected traffic matching must reflect the real packet addressing at encryption time.

C:

Use an approved one-to-one translation or network renumbering strategy addresses a different symptom: both sites use 10.10.10.0/24 and normal routes cannot distinguish their hosts. Overlapping addresses need distinct partner-visible prefixes for unambiguous traffic.

D:

Preserve original and post-NAT session tuples in VPN incident evidence is relevant when logs show only the translated source and investigators cannot identify a compromised original host. Translation attribution requires mapping the visible peer address back to the local client.

Question 589

A network designer handles overlapping RFC1918 networks across an IPsec tunnel. In the effective configuration, translation is configured only at one end and both sides translate the same prefix unexpectedly. What is the most appropriate next step?

  1. Update reverse routing toward the translated network that the peer can reach
  2. Document and coordinate a single consistent overlapping-network mapping plan
  3. Preserve original and post-NAT session tuples in VPN incident evidence
  4. Make selector configuration agree with the addresses after the approved NAT strategy

Explanation

Correct Answer

B:

Choose document and coordinate a single consistent overlapping-network mapping plan. Uncoordinated double translation can create contradictory peer-side forwarding expectations. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Update reverse routing toward the translated network that the peer can reach is useful when a partner sees one translation prefix but the return route points to original inside addresses. Reply paths must use the destination space visible to the partner.

C:

Preserve original and post-NAT session tuples in VPN incident evidence is relevant when logs show only the translated source and investigators cannot identify a compromised original host. Translation attribution requires mapping the visible peer address back to the local client.

D:

Make selector configuration agree with the addresses after the approved NAT strategy is useful when tunnel selectors cover the untranslated network but the traffic policy changes source addresses. Protected traffic matching must reflect the real packet addressing at encryption time.

Question 590

A network designer handles overlapping RFC1918 networks across an IPsec tunnel. The current operating problem is that logs show only the translated source and investigators cannot identify a compromised original host. Which control most directly addresses the observed gap?

  1. Preserve original and post-NAT session tuples in VPN incident evidence
  2. Use an approved one-to-one translation or network renumbering strategy
  3. Update reverse routing toward the translated network that the peer can reach
  4. Document and coordinate a single consistent overlapping-network mapping plan

Explanation

Correct Answer

A:

The appropriate control is to preserve original and post-NAT session tuples in VPN incident evidence. Translation attribution requires mapping the visible peer address back to the local client.

Incorrect Answers

B:

Use an approved one-to-one translation or network renumbering strategy is relevant when both sites use 10.10.10.0/24 and normal routes cannot distinguish their hosts. Overlapping addresses need distinct partner-visible prefixes for unambiguous traffic.

C:

Update reverse routing toward the translated network that the peer can reach is useful when a partner sees one translation prefix but the return route points to original inside addresses. Reply paths must use the destination space visible to the partner.

D:

Document and coordinate a single consistent overlapping-network mapping plan addresses a different symptom: translation is configured only at one end and both sides translate the same prefix unexpectedly. Uncoordinated double translation can create contradictory peer-side forwarding expectations.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests