mcAfee Secure Website
exam =5
exam =6

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Reliable & Actual Study Materials for NSE4_FGT_AD-7.6 Exam Success

94 Questions & Answers with Testing Engine

"NSE4_FGT_AD-7.6: Fortinet NSE 4 - FortiOS 7.6 Administrator" Testing Engine covers all the knowledge points of the real Fortinet NSE4_FGT_AD-7.6 exam.

The latest actual NSE4_FGT_AD-7.6 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NSE4_FGT_AD-7.6 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Fortinet Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 47

Question 460

FortiGate route troubleshooting includes overlapping routes from several sources. The administrator observes that routing diagnostics look only at configured entries instead of active kernel routes. Which next step most directly addresses the reported evidence?

  1. Inspect route source and administrative distance instead of assuming static always wins
  2. Use a carefully scoped blackhole static route where the design requires it
  3. Inspect FortiGate's effective routing-table output for the destination
  4. Apply longest-prefix matching before comparing administrative distance

Explanation

Correct Answer

C:

Inspect FortiGate's effective routing-table output for the destination is the best response. Active forwarding state is authoritative for the next-hop actually selected.

Incorrect Answers

A:

Inspect route source and administrative distance instead of assuming static always wins is relevant when a static route and a connected route cover the same network and the wrong one is expected to win. Connected networks generally outrank a less-preferred equal-prefix static route.

B:

Use a carefully scoped blackhole static route where the design requires it is useful when a dynamic routing outage must fail closed for a sensitive subnet. Blackhole routes prevent unintended fallback leakage through a broader route.

D:

Apply longest-prefix matching before comparing administrative distance is relevant when a BGP route has a narrower prefix than an installed static default. Prefix specificity takes precedence over preference between different destination lengths.

Question 461

An internal VLAN has inconsistent FortiGate routing to DMZ services. A post-change test indicates that a host uses an incorrect subnet mask and sends local traffic to a gateway. Which response is most effective for this case?

  1. Add the required return route or appropriate translation plan
  2. Restore the intended return path through the stateful firewall
  3. Correct the endpoint subnet mask before altering FortiGate routes
  4. Inspect policy-routing tuple fields and correct the service match

Explanation

Correct Answer

C:

Choose correct the endpoint subnet mask before altering FortiGate routes. Host network calculations control whether a packet reaches the router. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Add the required return route or appropriate translation plan is relevant when one VLAN has no route back to a translated source subnet. Both forward and reverse paths need to reach the relevant security boundary.

B:

Restore the intended return path through the stateful firewall is useful when a server replies to a different router than the FortiGate that saw the SYN. Asymmetric replies can bypass the session state necessary for acceptance.

D:

Inspect policy-routing tuple fields and correct the service match is relevant when a policy route selects the wrong traffic because source TCP port was mistaken for destination port. Source and destination port criteria have different implications for flow classification.

Question 462

An internal VLAN has inconsistent FortiGate routing to DMZ services. The team reports that a server replies to a different router than the FortiGate that saw the SYN. What should the administrator do to address the stated condition?

  1. Correct the endpoint subnet mask before altering FortiGate routes
  2. Restore the intended return path through the stateful firewall
  3. Inspect policy-routing tuple fields and correct the service match
  4. Restore the egress interface or choose the approved available route

Explanation

Correct Answer

B:

The appropriate control is to restore the intended return path through the stateful firewall. Asymmetric replies can bypass the session state necessary for acceptance.

Incorrect Answers

A:

Correct the endpoint subnet mask before altering FortiGate routes is useful when a host uses an incorrect subnet mask and sends local traffic to a gateway. Host network calculations control whether a packet reaches the router.

C:

Inspect policy-routing tuple fields and correct the service match is relevant when a policy route selects the wrong traffic because source TCP port was mistaken for destination port. Source and destination port criteria have different implications for flow classification.

D:

Restore the egress interface or choose the approved available route is useful when a static route references an interface whose link is physically down. An unusable interface cannot forward packets despite configured route text.

Question 463

An internal VLAN has inconsistent FortiGate routing to DMZ services. In the effective configuration, one VLAN has no route back to a translated source subnet. Which action best meets the stated requirement?

  1. Correct the endpoint subnet mask before altering FortiGate routes
  2. Add the required return route or appropriate translation plan
  3. Restore the egress interface or choose the approved available route
  4. Inspect policy-routing tuple fields and correct the service match

Explanation

Correct Answer

B:

Add the required return route or appropriate translation plan directly addresses the requirement. Both forward and reverse paths need to reach the relevant security boundary.

Incorrect Answers

A:

Correct the endpoint subnet mask before altering FortiGate routes addresses a different symptom: a host uses an incorrect subnet mask and sends local traffic to a gateway. Host network calculations control whether a packet reaches the router.

C:

Restore the egress interface or choose the approved available route is useful when a static route references an interface whose link is physically down. An unusable interface cannot forward packets despite configured route text.

D:

Inspect policy-routing tuple fields and correct the service match addresses a different symptom: a policy route selects the wrong traffic because source TCP port was mistaken for destination port. Source and destination port criteria have different implications for flow classification.

Question 464

An internal VLAN has inconsistent FortiGate routing to DMZ services. The current operating problem is that a static route references an interface whose link is physically down. What is the most appropriate next step?

  1. Correct the endpoint subnet mask before altering FortiGate routes
  2. Inspect policy-routing tuple fields and correct the service match
  3. Restore the egress interface or choose the approved available route
  4. Add the required return route or appropriate translation plan

Explanation

Correct Answer

C:

Restore the egress interface or choose the approved available route is the best response. An unusable interface cannot forward packets despite configured route text.

Incorrect Answers

A:

Correct the endpoint subnet mask before altering FortiGate routes is relevant when a host uses an incorrect subnet mask and sends local traffic to a gateway. Host network calculations control whether a packet reaches the router.

B:

Inspect policy-routing tuple fields and correct the service match is useful when a policy route selects the wrong traffic because source TCP port was mistaken for destination port. Source and destination port criteria have different implications for flow classification.

D:

Add the required return route or appropriate translation plan is relevant when one VLAN has no route back to a translated source subnet. Both forward and reverse paths need to reach the relevant security boundary.

Question 465

An internal VLAN has inconsistent FortiGate routing to DMZ services. An incident review establishes that a policy route selects the wrong traffic because source TCP port was mistaken for destination port. What should the engineer investigate or verify?

  1. Restore the egress interface or choose the approved available route
  2. Correct the endpoint subnet mask before altering FortiGate routes
  3. Restore the intended return path through the stateful firewall
  4. Inspect policy-routing tuple fields and correct the service match

Explanation

Correct Answer

D:

Choose inspect policy-routing tuple fields and correct the service match. Source and destination port criteria have different implications for flow classification. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Restore the egress interface or choose the approved available route is useful when a static route references an interface whose link is physically down. An unusable interface cannot forward packets despite configured route text.

B:

Correct the endpoint subnet mask before altering FortiGate routes addresses a different symptom: a host uses an incorrect subnet mask and sends local traffic to a gateway. Host network calculations control whether a packet reaches the router.

C:

Restore the intended return path through the stateful firewall is relevant when a server replies to a different router than the FortiGate that saw the SYN. Asymmetric replies can bypass the session state necessary for acceptance.

Question 466

A FortiGate connects to a partner over policy-routed and ordinary paths. The observed symptom is that a partner subnet is more specific than the internet default route. What should the administrator do to address the stated condition?

  1. Test the actual application tuple and inspect FortiGate policy/route/session state
  2. Install an appropriate static prefix route toward the partner connection
  3. Remove or disable the stale specific route after controlled validation
  4. Configure the lower route preference on the leased-line path with a tested fallback

Explanation

Correct Answer

B:

The appropriate control is to install an appropriate static prefix route toward the partner connection. Specific partner networks should not rely on generic internet default forwarding.

Incorrect Answers

A:

Test the actual application tuple and inspect FortiGate policy/route/session state is useful when a traceroute differs from a full application session path and misleads analysts. Probing protocols may be handled differently from production TCP flows.

C:

Remove or disable the stale specific route after controlled validation is relevant when an old VPN route remains active after the protected peer is removed. An obsolete route can blackhole otherwise valid traffic.

D:

Configure the lower route preference on the leased-line path with a tested fallback is useful when the same prefix should prefer a dedicated leased line before the VPN. Administrative distance controls preferred equal-prefix route selection.

Question 467

A FortiGate connects to a partner over policy-routed and ordinary paths. A post-change test indicates that the same prefix should prefer a dedicated leased line before the VPN. Which action best meets the stated requirement?

  1. Configure the lower route preference on the leased-line path with a tested fallback
  2. Remove or disable the stale specific route after controlled validation
  3. Test the actual application tuple and inspect FortiGate policy/route/session state
  4. Install an appropriate static prefix route toward the partner connection

Explanation

Correct Answer

A:

Configure the lower route preference on the leased-line path with a tested fallback directly addresses the requirement. Administrative distance controls preferred equal-prefix route selection.

Incorrect Answers

B:

Remove or disable the stale specific route after controlled validation is relevant when an old VPN route remains active after the protected peer is removed. An obsolete route can blackhole otherwise valid traffic.

C:

Test the actual application tuple and inspect FortiGate policy/route/session state is useful when a traceroute differs from a full application session path and misleads analysts. Probing protocols may be handled differently from production TCP flows.

D:

Install an appropriate static prefix route toward the partner connection addresses a different symptom: a partner subnet is more specific than the internet default route. Specific partner networks should not rely on generic internet default forwarding.

Question 468

A FortiGate connects to a partner over policy-routed and ordinary paths. The team reports that an old VPN route remains active after the protected peer is removed. What is the most appropriate next step?

  1. Configure the lower route preference on the leased-line path with a tested fallback
  2. Test the actual application tuple and inspect FortiGate policy/route/session state
  3. Narrow source/destination criteria and rule placement for the intended group
  4. Remove or disable the stale specific route after controlled validation

Explanation

Correct Answer

D:

Remove or disable the stale specific route after controlled validation is the best response. An obsolete route can blackhole otherwise valid traffic.

Incorrect Answers

A:

Configure the lower route preference on the leased-line path with a tested fallback is relevant when the same prefix should prefer a dedicated leased line before the VPN. Administrative distance controls preferred equal-prefix route selection.

B:

Test the actual application tuple and inspect FortiGate policy/route/session state is useful when a traceroute differs from a full application session path and misleads analysts. Probing protocols may be handled differently from production TCP flows.

C:

Narrow source/destination criteria and rule placement for the intended group addresses a different symptom: multiple departments are accidentally covered by a broad policy route. Policy-based routing is evaluated by matching traffic conditions.

Question 469

A FortiGate connects to a partner over policy-routed and ordinary paths. In the effective configuration, multiple departments are accidentally covered by a broad policy route. Which control most directly addresses the observed gap?

  1. Configure the lower route preference on the leased-line path with a tested fallback
  2. Install an appropriate static prefix route toward the partner connection
  3. Remove or disable the stale specific route after controlled validation
  4. Narrow source/destination criteria and rule placement for the intended group

Explanation

Correct Answer

D:

Choose narrow source/destination criteria and rule placement for the intended group. Policy-based routing is evaluated by matching traffic conditions. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Configure the lower route preference on the leased-line path with a tested fallback is useful when the same prefix should prefer a dedicated leased line before the VPN. Administrative distance controls preferred equal-prefix route selection.

B:

Install an appropriate static prefix route toward the partner connection addresses a different symptom: a partner subnet is more specific than the internet default route. Specific partner networks should not rely on generic internet default forwarding.

C:

Remove or disable the stale specific route after controlled validation is relevant when an old VPN route remains active after the protected peer is removed. An obsolete route can blackhole otherwise valid traffic.

Question 470

A FortiGate connects to a partner over policy-routed and ordinary paths. The current operating problem is that a traceroute differs from a full application session path and misleads analysts. Which action is most appropriate in this situation?

  1. Remove or disable the stale specific route after controlled validation
  2. Narrow source/destination criteria and rule placement for the intended group
  3. Configure the lower route preference on the leased-line path with a tested fallback
  4. Test the actual application tuple and inspect FortiGate policy/route/session state

Explanation

Correct Answer

D:

The appropriate control is to test the actual application tuple and inspect FortiGate policy/route/session state. Probing protocols may be handled differently from production TCP flows.

Incorrect Answers

A:

Remove or disable the stale specific route after controlled validation addresses a different symptom: an old VPN route remains active after the protected peer is removed. An obsolete route can blackhole otherwise valid traffic.

B:

Narrow source/destination criteria and rule placement for the intended group is relevant when multiple departments are accidentally covered by a broad policy route. Policy-based routing is evaluated by matching traffic conditions.

C:

Configure the lower route preference on the leased-line path with a tested fallback is useful when the same prefix should prefer a dedicated leased line before the VPN. Administrative distance controls preferred equal-prefix route selection.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests