mcAfee Secure Website
exam =5
exam =6

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Reliable & Actual Study Materials for NSE4_FGT_AD-7.6 Exam Success

94 Questions & Answers with Testing Engine

"NSE4_FGT_AD-7.6: Fortinet NSE 4 - FortiOS 7.6 Administrator" Testing Engine covers all the knowledge points of the real Fortinet NSE4_FGT_AD-7.6 exam.

The latest actual NSE4_FGT_AD-7.6 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NSE4_FGT_AD-7.6 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Fortinet Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 45

Question 440

A FortiGate routes branch traffic between internal networks and an ISP. The team reports that an inactive static route is expected to appear in the active forwarding table. What should the engineer investigate or verify?

  1. Install a static route for the destination prefix through the reachable next hop
  2. Verify longest-prefix route matching for the more specific subnet
  3. Inspect the routing table and determine why the configured entry is not installed
  4. Prefer the approved path with the lower administrative distance when both are otherwise valid

Explanation

Correct Answer

C:

Inspect the routing table and determine why the configured entry is not installed is the best response. Configured route entries and active forwarding selections are not the same view.

Incorrect Answers

A:

Install a static route for the destination prefix through the reachable next hop addresses a different symptom: a destination network is unreachable because no static route covers the remote prefix. A matching route is needed to select where a packet leaves the firewall.

B:

Verify longest-prefix route matching for the more specific subnet is relevant when a specific /24 route must win against an existing default route. The most-specific matching route is chosen before a less-specific default path.

D:

Prefer the approved path with the lower administrative distance when both are otherwise valid addresses a different symptom: two identical-prefix static routes have different administrative distances. Administrative distance chooses between equal-prefix routes from competing sources.

Question 441

An organization uses redundant WAN default routes on FortiGate. An incident review establishes that a backup default route is selected instead of primary because their distances are reversed. What should the administrator do to address the stated condition?

  1. Use supported link or gateway monitoring for the failover requirement
  2. Verify both ends' return routing and any stateful inspection requirements
  3. Configure appropriate administrative distances for preferred and backup routes
  4. Configure and validate supported ECMP with equal route preferences

Explanation

Correct Answer

C:

Choose configure appropriate administrative distances for preferred and backup routes. Lower distance selects the preferred equal-prefix static route. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Use supported link or gateway monitoring for the failover requirement addresses a different symptom: a dead primary ISP link leaves a route installed despite lost upstream reachability. Interface-up status alone may not prove reachability beyond the next hop.

B:

Verify both ends' return routing and any stateful inspection requirements is relevant when a backup route appears but return traffic flows asymmetrically through another firewall. Route failover must preserve a valid session path in both directions.

D:

Configure and validate supported ECMP with equal route preferences addresses a different symptom: two equal-cost default paths should share eligible sessions rather than prefer only one. Equal-cost multipath can distribute eligible sessions over parallel active next hops.

Question 442

An organization uses redundant WAN default routes on FortiGate. The administrator observes that a dead primary ISP link leaves a route installed despite lost upstream reachability. Which action best meets the stated requirement?

  1. Probe a destination beyond the provider to validate end-to-end forwarding
  2. Use supported link or gateway monitoring for the failover requirement
  3. Configure appropriate administrative distances for preferred and backup routes
  4. Configure and validate supported ECMP with equal route preferences

Explanation

Correct Answer

B:

The appropriate control is to use supported link or gateway monitoring for the failover requirement. Interface-up status alone may not prove reachability beyond the next hop.

Incorrect Answers

A:

Probe a destination beyond the provider to validate end-to-end forwarding is relevant when a test checks only ping to the next-hop router after failover. An accessible gateway does not guarantee internet or remote application reachability.

C:

Configure appropriate administrative distances for preferred and backup routes addresses a different symptom: a backup default route is selected instead of primary because their distances are reversed. Lower distance selects the preferred equal-prefix static route.

D:

Configure and validate supported ECMP with equal route preferences is relevant when two equal-cost default paths should share eligible sessions rather than prefer only one. Equal-cost multipath can distribute eligible sessions over parallel active next hops.

Question 443

An organization uses redundant WAN default routes on FortiGate. During troubleshooting, the engineer finds that two equal-cost default paths should share eligible sessions rather than prefer only one. What is the most appropriate next step?

  1. Verify both ends' return routing and any stateful inspection requirements
  2. Configure appropriate administrative distances for preferred and backup routes
  3. Configure and validate supported ECMP with equal route preferences
  4. Probe a destination beyond the provider to validate end-to-end forwarding

Explanation

Correct Answer

C:

Configure and validate supported ECMP with equal route preferences directly addresses the requirement. Equal-cost multipath can distribute eligible sessions over parallel active next hops.

Incorrect Answers

A:

Verify both ends' return routing and any stateful inspection requirements is useful when a backup route appears but return traffic flows asymmetrically through another firewall. Route failover must preserve a valid session path in both directions.

B:

Configure appropriate administrative distances for preferred and backup routes addresses a different symptom: a backup default route is selected instead of primary because their distances are reversed. Lower distance selects the preferred equal-prefix static route.

D:

Probe a destination beyond the provider to validate end-to-end forwarding is useful when a test checks only ping to the next-hop router after failover. An accessible gateway does not guarantee internet or remote application reachability.

Question 444

An organization uses redundant WAN default routes on FortiGate. The observed symptom is that a backup route appears but return traffic flows asymmetrically through another firewall. What should the engineer investigate or verify?

  1. Configure and validate supported ECMP with equal route preferences
  2. Configure appropriate administrative distances for preferred and backup routes
  3. Verify both ends' return routing and any stateful inspection requirements
  4. Probe a destination beyond the provider to validate end-to-end forwarding

Explanation

Correct Answer

C:

Verify both ends' return routing and any stateful inspection requirements is the best response. Route failover must preserve a valid session path in both directions.

Incorrect Answers

A:

Configure and validate supported ECMP with equal route preferences addresses a different symptom: two equal-cost default paths should share eligible sessions rather than prefer only one. Equal-cost multipath can distribute eligible sessions over parallel active next hops.

B:

Configure appropriate administrative distances for preferred and backup routes is relevant when a backup default route is selected instead of primary because their distances are reversed. Lower distance selects the preferred equal-prefix static route.

D:

Probe a destination beyond the provider to validate end-to-end forwarding addresses a different symptom: a test checks only ping to the next-hop router after failover. An accessible gateway does not guarantee internet or remote application reachability.

Question 445

An organization uses redundant WAN default routes on FortiGate. A post-change test indicates that a test checks only ping to the next-hop router after failover. Which response is most effective for this case?

  1. Use supported link or gateway monitoring for the failover requirement
  2. Configure and validate supported ECMP with equal route preferences
  3. Probe a destination beyond the provider to validate end-to-end forwarding
  4. Configure appropriate administrative distances for preferred and backup routes

Explanation

Correct Answer

C:

Choose probe a destination beyond the provider to validate end-to-end forwarding. An accessible gateway does not guarantee internet or remote application reachability. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Use supported link or gateway monitoring for the failover requirement is relevant when a dead primary ISP link leaves a route installed despite lost upstream reachability. Interface-up status alone may not prove reachability beyond the next hop.

B:

Configure and validate supported ECMP with equal route preferences is useful when two equal-cost default paths should share eligible sessions rather than prefer only one. Equal-cost multipath can distribute eligible sessions over parallel active next hops.

D:

Configure appropriate administrative distances for preferred and backup routes is relevant when a backup default route is selected instead of primary because their distances are reversed. Lower distance selects the preferred equal-prefix static route.

Question 446

A router advertises a remote network reachable through a FortiGate static route. The current operating problem is that the admin adds a /16 static route that accidentally overrides many /24-specific destinations. Which action best meets the stated requirement?

  1. Make the route's gateway reachable with the intended connected network
  2. Inspect the blackhole route and adjust only the incorrect specific prefix
  3. Use the correct narrow destination prefix for the intended remote subnet
  4. Update the static route to the active tunnel interface

Explanation

Correct Answer

C:

The appropriate control is to use the correct narrow destination prefix for the intended remote subnet. Overly broad routes can divert traffic outside the requested network.

Incorrect Answers

A:

Make the route's gateway reachable with the intended connected network is relevant when a route points to the correct interface but the peer's IP is outside its directly connected subnet. A next hop requires a resolvable path rather than an arbitrary address.

B:

Inspect the blackhole route and adjust only the incorrect specific prefix is useful when the routing table contains a more-specific blackhole entry that drops a test flow. A matching blackhole route intentionally discards traffic without choosing an external next hop.

D:

Update the static route to the active tunnel interface is relevant when after a tunnel change the route still references the old IPsec interface. Route egress selection determines which VPN overlay carries the packet.

Question 447

A router advertises a remote network reachable through a FortiGate static route. An incident review establishes that a static route is entered in the global context but the affected VLAN is in another VDOM. What is the most appropriate next step?

  1. Configure the route in the traffic's correct VDOM routing table
  2. Make the route's gateway reachable with the intended connected network
  3. Update the static route to the active tunnel interface
  4. Use the correct narrow destination prefix for the intended remote subnet

Explanation

Correct Answer

A:

Configure the route in the traffic's correct VDOM routing table directly addresses the requirement. Each VDOM maintains its own routing context for forwarded sessions.

Incorrect Answers

B:

Make the route's gateway reachable with the intended connected network addresses a different symptom: a route points to the correct interface but the peer's IP is outside its directly connected subnet. A next hop requires a resolvable path rather than an arbitrary address.

C:

Update the static route to the active tunnel interface is relevant when after a tunnel change the route still references the old IPsec interface. Route egress selection determines which VPN overlay carries the packet.

D:

Use the correct narrow destination prefix for the intended remote subnet is useful when the admin adds a /16 static route that accidentally overrides many /24-specific destinations. Overly broad routes can divert traffic outside the requested network.

Question 448

A router advertises a remote network reachable through a FortiGate static route. The administrator observes that a route points to the correct interface but the peer's IP is outside its directly connected subnet. Which control most directly addresses the observed gap?

  1. Make the route's gateway reachable with the intended connected network
  2. Inspect the blackhole route and adjust only the incorrect specific prefix
  3. Configure the route in the traffic's correct VDOM routing table
  4. Use the correct narrow destination prefix for the intended remote subnet

Explanation

Correct Answer

A:

Make the route's gateway reachable with the intended connected network is the best response. A next hop requires a resolvable path rather than an arbitrary address.

Incorrect Answers

B:

Inspect the blackhole route and adjust only the incorrect specific prefix is relevant when the routing table contains a more-specific blackhole entry that drops a test flow. A matching blackhole route intentionally discards traffic without choosing an external next hop.

C:

Configure the route in the traffic's correct VDOM routing table is useful when a static route is entered in the global context but the affected VLAN is in another VDOM. Each VDOM maintains its own routing context for forwarded sessions.

D:

Use the correct narrow destination prefix for the intended remote subnet addresses a different symptom: the admin adds a /16 static route that accidentally overrides many /24-specific destinations. Overly broad routes can divert traffic outside the requested network.

Question 449

A router advertises a remote network reachable through a FortiGate static route. During troubleshooting, the engineer finds that after a tunnel change the route still references the old IPsec interface. Which response is most effective for this case?

  1. Make the route's gateway reachable with the intended connected network
  2. Inspect the blackhole route and adjust only the incorrect specific prefix
  3. Update the static route to the active tunnel interface
  4. Configure the route in the traffic's correct VDOM routing table

Explanation

Correct Answer

C:

Choose update the static route to the active tunnel interface. Route egress selection determines which VPN overlay carries the packet. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Make the route's gateway reachable with the intended connected network is relevant when a route points to the correct interface but the peer's IP is outside its directly connected subnet. A next hop requires a resolvable path rather than an arbitrary address.

B:

Inspect the blackhole route and adjust only the incorrect specific prefix is useful when the routing table contains a more-specific blackhole entry that drops a test flow. A matching blackhole route intentionally discards traffic without choosing an external next hop.

D:

Configure the route in the traffic's correct VDOM routing table is relevant when a static route is entered in the global context but the affected VLAN is in another VDOM. Each VDOM maintains its own routing context for forwarded sessions.

Question 450

A router advertises a remote network reachable through a FortiGate static route. The observed symptom is that the routing table contains a more-specific blackhole entry that drops a test flow. Which response best fits the observed symptoms?

  1. Make the route's gateway reachable with the intended connected network
  2. Use the correct narrow destination prefix for the intended remote subnet
  3. Configure the route in the traffic's correct VDOM routing table
  4. Inspect the blackhole route and adjust only the incorrect specific prefix

Explanation

Correct Answer

D:

The appropriate control is to inspect the blackhole route and adjust only the incorrect specific prefix. A matching blackhole route intentionally discards traffic without choosing an external next hop.

Incorrect Answers

A:

Make the route's gateway reachable with the intended connected network is useful when a route points to the correct interface but the peer's IP is outside its directly connected subnet. A next hop requires a resolvable path rather than an arbitrary address.

B:

Use the correct narrow destination prefix for the intended remote subnet addresses a different symptom: the admin adds a /16 static route that accidentally overrides many /24-specific destinations. Overly broad routes can divert traffic outside the requested network.

C:

Configure the route in the traffic's correct VDOM routing table is relevant when a static route is entered in the global context but the affected VLAN is in another VDOM. Each VDOM maintains its own routing context for forwarded sessions.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests