mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 80

Question 790

A NetApp ONTAP administrator must resolve this situation: Background storage efficiency work overlaps a critical batch window. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  2. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.
  3. After targeted space or scheduling remediation, the affected workload's throughput recovers with required recovery points preserved.
  4. A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.
  5. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.

Explanation

Correct Answers

A:

This is the proposed corrective action for: Background storage efficiency work overlaps a critical batch window. The action addresses the ONTAP failure mechanism: A nearly full aggregate or competing maintenance activity can make normal workloads slow or unreliable.

C:

This provides separate verification for the same issue: Background storage efficiency work overlaps a critical batch window. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

B:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. This does not supply the required capacity pressure and snapshot workload performance action-and-control pair.

D:

A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact. The capacity pressure and snapshot workload performance implementation and safeguard are still missing.

E:

Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities. The two-part capacity pressure and snapshot workload performance control remains unsatisfied.

Question 791

During a storage operations review for an enterprise disaster recovery review, the team observes: An operator deletes protected snapshots without confirming they caused performance loss. The decision must maintain preservation of recoverable data under controlled change. Which change best corrects the storage design under these conditions?

  1. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  2. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.
  3. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  4. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: An operator deletes protected snapshots without confirming they caused performance loss. It specifically applies capacity pressure and snapshot workload performance and mitigates: A nearly full aggregate or competing maintenance activity can make normal workloads slow or unreliable. A practical completion check is: After targeted space or scheduling remediation, the affected workload's throughput recovers with required recovery points preserved.

Incorrect Answers

B:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. Acceptance here depends on observing capacity pressure and snapshot workload performance, not only that test.

C:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. It does not establish the requested capacity pressure and snapshot workload performance outcome.

D:

Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause. The relevant success criterion is capacity pressure and snapshot workload performance; this measures a different function.

Question 792

After corrective work for the ONTAP issue 'An operator deletes protected snapshots without confirming they caused performance loss', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. Before-and-after traces show the identified layer improved and application-level response meets the target.
  2. After targeted space or scheduling remediation, the affected workload's throughput recovers with required recovery points preserved.
  3. A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.
  4. Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application.

Explanation

Correct Answer

B:

This is observable acceptance evidence for: An operator deletes protected snapshots without confirming they caused performance loss. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Before-and-after traces show the identified layer improved and application-level response meets the target. Acceptance here depends on observing capacity pressure and snapshot workload performance, not only that test.

C:

A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact. The relevant success criterion is capacity pressure and snapshot workload performance; this measures a different function.

D:

Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application. That result could pass without demonstrating capacity pressure and snapshot workload performance.

Question 793

During a storage operations review for a regional managed storage service provider, the team observes: One iSCSI host is slow because it uses an unoptimized or failed path. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.
  2. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.
  3. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  4. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: One iSCSI host is slow because it uses an unoptimized or failed path. It specifically applies protocol-specific performance path diagnosis and mitigates: An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media. A practical completion check is: A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.

Incorrect Answers

B:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. It changes a different feature than protocol-specific performance path diagnosis.

C:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. That change would not implement protocol-specific performance path diagnosis.

D:

Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents. The configuration must instead establish protocol-specific performance path diagnosis.

Question 794

After corrective work for the ONTAP issue 'One iSCSI host is slow because it uses an unoptimized or failed path', the operator seeks objective signoff. Which acceptance result demonstrates that this ONTAP issue has been corrected?

  1. Before-and-after traces show the identified layer improved and application-level response meets the target.
  2. Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application.
  3. A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.
  4. After targeted space or scheduling remediation, the affected workload's throughput recovers with required recovery points preserved.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: One iSCSI host is slow because it uses an unoptimized or failed path. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Before-and-after traces show the identified layer improved and application-level response meets the target. The relevant success criterion is protocol-specific performance path diagnosis; this measures a different function.

B:

Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application. That result could pass without demonstrating protocol-specific performance path diagnosis.

D:

After targeted space or scheduling remediation, the affected workload's throughput recovers with required recovery points preserved. It does not establish the requested protocol-specific performance path diagnosis outcome.

Question 795

During a storage operations review for an enterprise disaster recovery review, the team observes: NFS clients see latency from name service lookup while file IO on storage is healthy. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  2. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.
  3. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.
  4. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: NFS clients see latency from name service lookup while file IO on storage is healthy. It specifically applies protocol-specific performance path diagnosis and mitigates: An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media. A practical completion check is: A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.

Incorrect Answers

A:

Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents. That change would not implement protocol-specific performance path diagnosis.

B:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. The configuration must instead establish protocol-specific performance path diagnosis.

D:

Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive. It changes a different feature than protocol-specific performance path diagnosis.

Question 796

After corrective work for the ONTAP issue 'NFS clients see latency from name service lookup while file IO on storage is healthy', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.
  2. After targeted space or scheduling remediation, the affected workload's throughput recovers with required recovery points preserved.
  3. A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.
  4. Before-and-after traces show the identified layer improved and application-level response meets the target.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: NFS clients see latency from name service lookup while file IO on storage is healthy. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time. The configuration must instead establish protocol-specific performance path diagnosis.

B:

After targeted space or scheduling remediation, the affected workload's throughput recovers with required recovery points preserved. The protocol-specific performance path diagnosis prerequisite remains unaddressed.

D:

Before-and-after traces show the identified layer improved and application-level response meets the target. That change would not implement protocol-specific performance path diagnosis.

Question 797

During a storage operations review for a regulated healthcare records provider, the team observes: An SMB client shows repeated session reconnects following a switch upgrade. The decision must maintain patient data and application recovery obligations. Which engineering choice most directly solves this problem?

  1. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.
  2. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.
  3. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  4. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: An SMB client shows repeated session reconnects following a switch upgrade. It specifically applies protocol-specific performance path diagnosis and mitigates: An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media. A practical completion check is: A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.

Incorrect Answers

A:

Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities. The protocol-specific performance path diagnosis prerequisite remains unaddressed.

C:

Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents. That change would not implement protocol-specific performance path diagnosis.

D:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. The configuration must instead establish protocol-specific performance path diagnosis.

Question 798

A NetApp ONTAP change review identifies: An SMB client shows repeated session reconnects following a switch upgrade. Which consequence should the administrator prioritize in this situation?

  1. Replacing flash storage cannot fix a congested switch or a host issuing serialized IO.
  2. An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media.
  3. A nearly full aggregate or competing maintenance activity can make normal workloads slow or unreliable.
  4. Unrestricted low-priority workloads can consume resources needed by latency-sensitive applications.

Explanation

Correct Answer

B:

This is the directly implicated exposure when an SMB client shows repeated session reconnects following a switch upgrade. The relevant corrective control is: Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause. A meaningful acceptance test is: A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.

Incorrect Answers

A:

Replacing flash storage cannot fix a congested switch or a host issuing serialized IO. It changes a different feature than protocol-specific performance path diagnosis.

C:

A nearly full aggregate or competing maintenance activity can make normal workloads slow or unreliable. The configuration must instead establish protocol-specific performance path diagnosis.

D:

Unrestricted low-priority workloads can consume resources needed by latency-sensitive applications. The protocol-specific performance path diagnosis prerequisite remains unaddressed.

Question 799

During a storage operations review for a university research storage team, the team observes: FC clients are slow on one fabric despite the array's low volume response times. The decision must maintain shared-client safety and reproducible workloads. Which change best corrects the storage design under these conditions?

  1. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.
  2. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  3. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.
  4. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: FC clients are slow on one fabric despite the array's low volume response times. It specifically applies protocol-specific performance path diagnosis and mitigates: An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media. A practical completion check is: A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.

Incorrect Answers

A:

Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive. That change would not implement protocol-specific performance path diagnosis.

B:

Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents. The configuration must instead establish protocol-specific performance path diagnosis.

D:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. It changes a different feature than protocol-specific performance path diagnosis.

Question 800

A NetApp ONTAP administrator must resolve this situation: FC clients are slow on one fabric despite the array's low volume response times. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.
  2. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.
  3. A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.
  4. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  5. Before-and-after traces show the identified layer improved and application-level response meets the target.

Explanation

Correct Answers

A:

This is the proposed corrective action for: FC clients are slow on one fabric despite the array's low volume response times. The action addresses the ONTAP failure mechanism: An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media.

C:

This provides separate verification for the same issue: FC clients are slow on one fabric despite the array's low volume response times. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

B:

Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive. The protocol-specific performance path diagnosis implementation and safeguard are still missing.

D:

Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents. This does not supply the required protocol-specific performance path diagnosis action-and-control pair.

E:

Before-and-after traces show the identified layer improved and application-level response meets the target. The two-part protocol-specific performance path diagnosis control remains unsatisfied.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests