mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 77

Question 760

A NetApp ONTAP administrator must resolve this situation: An administrator recommends new controllers without any before-change workload baseline. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.
  2. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  3. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.
  4. Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application.
  5. Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.

Explanation

Correct Answers

B:

This is the proposed corrective action for: An administrator recommends new controllers without any before-change workload baseline. The action addresses the ONTAP failure mechanism: A high IOPS figure alone cannot establish acceptable response time or reveal a bandwidth-bound workload.

D:

This provides separate verification for the same issue: An administrator recommends new controllers without any before-change workload baseline. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause. The paired controls concern ONTAP latency iops and throughput baseline, not that measure.

C:

Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities. It is not the complementary risk control for ONTAP latency iops and throughput baseline.

E:

Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time. The two-part ONTAP latency iops and throughput baseline control remains unsatisfied.

Question 761

During a storage operations review for a regional managed storage service provider, the team observes: One busy volume has high latency while cluster-average CPU appears normal. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.
  2. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.
  3. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.
  4. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: One busy volume has high latency while cluster-average CPU appears normal. It specifically applies volume and node performance hot-spot monitoring and mitigates: An overloaded single volume or node can violate an SLA while other cluster components appear idle. A practical completion check is: Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.

Incorrect Answers

A:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. The volume and node performance hot-spot monitoring prerequisite remains unaddressed.

C:

Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities. That change would not implement volume and node performance hot-spot monitoring.

D:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. The configuration must instead establish volume and node performance hot-spot monitoring.

Question 762

After corrective work for the ONTAP issue 'One busy volume has high latency while cluster-average CPU appears normal', the operator seeks objective signoff. Which acceptance result demonstrates that this ONTAP issue has been corrected?

  1. Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application.
  2. Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.
  3. Before-and-after traces show the identified layer improved and application-level response meets the target.
  4. A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior.

Explanation

Correct Answer

B:

This is observable acceptance evidence for: One busy volume has high latency while cluster-average CPU appears normal. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application. The relevant success criterion is volume and node performance hot-spot monitoring; this measures a different function.

C:

Before-and-after traces show the identified layer improved and application-level response meets the target. Acceptance here depends on observing volume and node performance hot-spot monitoring, not only that test.

D:

A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior. It does not establish the requested volume and node performance hot-spot monitoring outcome.

Question 763

During a storage operations review for an enterprise disaster recovery review, the team observes: A shared aggregate sees write contention after adding a new tenant. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  2. Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency.
  3. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.
  4. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: A shared aggregate sees write contention after adding a new tenant. It specifically applies volume and node performance hot-spot monitoring and mitigates: An overloaded single volume or node can violate an SLA while other cluster components appear idle. A practical completion check is: Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.

Incorrect Answers

A:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. That change would not implement volume and node performance hot-spot monitoring.

B:

Correlate host, storage network, ONTAP node and volume timing to locate the layer responsible for measured latency. The configuration must instead establish volume and node performance hot-spot monitoring.

D:

Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities. It changes a different feature than volume and node performance hot-spot monitoring.

Question 764

After corrective work for the ONTAP issue 'A shared aggregate sees write contention after adding a new tenant', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.
  2. A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior.
  3. Before-and-after traces show the identified layer improved and application-level response meets the target.
  4. Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: A shared aggregate sees write contention after adding a new tenant. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior. The volume and node performance hot-spot monitoring prerequisite remains unaddressed.

C:

Before-and-after traces show the identified layer improved and application-level response meets the target. It changes a different feature than volume and node performance hot-spot monitoring.

D:

Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application. That change would not implement volume and node performance hot-spot monitoring.

Question 765

During a storage operations review for a regulated healthcare records provider, the team observes: A performance dashboard lists only cluster-wide averages and misses node imbalance. The decision must maintain patient data and application recovery obligations. Which engineering choice most directly solves this problem?

  1. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  2. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.
  3. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.
  4. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: A performance dashboard lists only cluster-wide averages and misses node imbalance. It specifically applies volume and node performance hot-spot monitoring and mitigates: An overloaded single volume or node can violate an SLA while other cluster components appear idle. A practical completion check is: Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.

Incorrect Answers

A:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. The volume and node performance hot-spot monitoring prerequisite remains unaddressed.

B:

Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities. It changes a different feature than volume and node performance hot-spot monitoring.

D:

Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause. The configuration must instead establish volume and node performance hot-spot monitoring.

Question 766

After corrective work for the ONTAP issue 'A performance dashboard lists only cluster-wide averages and misses node imbalance', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact.
  2. Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application.
  3. Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.
  4. A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: A performance dashboard lists only cluster-wide averages and misses node imbalance. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

A representative client transaction meets latency targets over the corrected protocol path and redundancy remains intact. The relevant success criterion is volume and node performance hot-spot monitoring; this measures a different function.

B:

Repeatable workload tests meet explicit latency, throughput and IOPS objectives for the affected application. That result could pass without demonstrating volume and node performance hot-spot monitoring.

D:

A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior. It does not establish the requested volume and node performance hot-spot monitoring outcome.

Question 767

During a storage operations review for a university research storage team, the team observes: An application slows after its volume was moved to a crowded node. The decision must maintain shared-client safety and reproducible workloads. Which change best corrects the storage design under these conditions?

  1. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.
  2. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  3. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.
  4. Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: An application slows after its volume was moved to a crowded node. It specifically applies volume and node performance hot-spot monitoring and mitigates: An overloaded single volume or node can violate an SLA while other cluster components appear idle. A practical completion check is: Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.

Incorrect Answers

B:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. The configuration must instead establish volume and node performance hot-spot monitoring.

C:

Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities. The volume and node performance hot-spot monitoring prerequisite remains unaddressed.

D:

Use NFS, SMB, iSCSI, FC or NVMe client and storage evidence to isolate access-path latency rather than assuming all protocols share one tuning cause. It changes a different feature than volume and node performance hot-spot monitoring.

Question 768

A NetApp ONTAP change review identifies: An application slows after its volume was moved to a crowded node. Which consequence should the administrator prioritize in this situation?

  1. A high IOPS figure alone cannot establish acceptable response time or reveal a bandwidth-bound workload.
  2. An overloaded single volume or node can violate an SLA while other cluster components appear idle.
  3. An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media.
  4. Unrestricted low-priority workloads can consume resources needed by latency-sensitive applications.

Explanation

Correct Answer

B:

This is the directly implicated exposure when an application slows after its volume was moved to a crowded node. The relevant corrective control is: Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive. A meaningful acceptance test is: Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.

Incorrect Answers

A:

A high IOPS figure alone cannot establish acceptable response time or reveal a bandwidth-bound workload. The configuration must instead establish volume and node performance hot-spot monitoring.

C:

An application can suffer slow IO due to authentication, path selection or network retransmission with healthy media. It changes a different feature than volume and node performance hot-spot monitoring.

D:

Unrestricted low-priority workloads can consume resources needed by latency-sensitive applications. That change would not implement volume and node performance hot-spot monitoring.

Question 769

During a storage operations review for a regulated healthcare records provider, the team observes: A test backup saturates storage and delays a production database. The decision must maintain patient data and application recovery obligations. Which ONTAP administration change best addresses the observed failure?

  1. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  2. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.
  3. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  4. Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A test backup saturates storage and delays a production database. It specifically applies ontap qos policies and workload fairness and mitigates: Unrestricted low-priority workloads can consume resources needed by latency-sensitive applications. A practical completion check is: A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior.

Incorrect Answers

A:

Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents. The ONTAP qos policies and workload fairness prerequisite remains unaddressed.

C:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. That change would not implement ONTAP qos policies and workload fairness.

D:

Correlate node, aggregate, SVM and volume counters to locate workload concentration rather than treating overall cluster averages as definitive. The configuration must instead establish ONTAP qos policies and workload fairness.

Question 770

A NetApp ONTAP administrator must resolve this situation: A test backup saturates storage and delays a production database. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Apply supported ONTAP QoS throughput ceilings or adaptive policies to control noisy-neighbor demand under measured business priorities.
  2. Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents.
  3. Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks.
  4. Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time.
  5. A contention test shows the selected workload policy keeps critical latency within target while enforcing intended throughput behavior.

Explanation

Correct Answers

A:

This is the proposed corrective action for: A test backup saturates storage and delays a production database. The action addresses the ONTAP failure mechanism: Unrestricted low-priority workloads can consume resources needed by latency-sensitive applications.

E:

This provides separate verification for the same issue: A test backup saturates storage and delays a production database. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

B:

Inspect available aggregate capacity, metadata pressure, Snapshot retention and background efficiency activity during latency incidents. This does not supply the required ONTAP qos policies and workload fairness action-and-control pair.

C:

Measure ONTAP storage latency, IOPS and throughput against the application's workload profile before attributing performance to disks. The paired controls concern ONTAP qos policies and workload fairness, not that measure.

D:

Per-object metrics isolate the busy workload and its targeted remediation improves the affected client response time. The ONTAP qos policies and workload fairness implementation and safeguard are still missing.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests