mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 26

Question 250

A NetApp ONTAP administrator must resolve this situation: A new volume exists in ONTAP but is not visible at the documented NFS mount path. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees.
  2. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.
  3. Create and verify a correct NAS junction path in the SVM namespace for volumes intended to be mounted by NFS or SMB clients.
  4. Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.
  5. The authorized client resolves and mounts the intended data path, with no unexpected junction collisions.

Explanation

Correct Answers

C:

This is the proposed corrective action for: A new volume exists in ONTAP but is not visible at the documented NFS mount path. The action addresses the ONTAP failure mechanism: A healthy volume can remain hidden to clients when it is not joined to the expected namespace path.

E:

This provides separate verification for the same issue: A new volume exists in ONTAP but is not visible at the documented NFS mount path. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees. It is not the complementary risk control for nas junction paths and namespace visibility.

B:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. This does not supply the required nas junction paths and namespace visibility action-and-control pair.

D:

Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior. The nas junction paths and namespace visibility implementation and safeguard are still missing.

Question 251

During a storage operations review for an enterprise disaster recovery review, the team observes: A NAS team changes a junction path without updating applications. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  2. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.
  3. Create and verify a correct NAS junction path in the SVM namespace for volumes intended to be mounted by NFS or SMB clients.
  4. Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: A NAS team changes a junction path without updating applications. It specifically applies nas junction paths and namespace visibility and mitigates: A healthy volume can remain hidden to clients when it is not joined to the expected namespace path. A practical completion check is: The authorized client resolves and mounts the intended data path, with no unexpected junction collisions.

Incorrect Answers

A:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. That change would not implement nas junction paths and namespace visibility.

B:

Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies. The configuration must instead establish nas junction paths and namespace visibility.

D:

Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees. It changes a different feature than nas junction paths and namespace visibility.

Question 252

After corrective work for the ONTAP issue 'A NAS team changes a junction path without updating applications', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.
  2. A load test confirms expected write headroom and alerts trigger before the configured aggregate threshold is exhausted.
  3. The authorized client resolves and mounts the intended data path, with no unexpected junction collisions.
  4. Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: A NAS team changes a junction path without updating applications. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact. The configuration must instead establish nas junction paths and namespace visibility.

B:

A load test confirms expected write headroom and alerts trigger before the configured aggregate threshold is exhausted. The nas junction paths and namespace visibility prerequisite remains unaddressed.

D:

Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior. That change would not implement nas junction paths and namespace visibility.

Question 253

During a storage operations review for a regulated healthcare records provider, the team observes: Two volume junctions are planned with conflicting path names. The decision must maintain patient data and application recovery obligations. Which engineering choice most directly solves this problem?

  1. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  2. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  3. Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees.
  4. Create and verify a correct NAS junction path in the SVM namespace for volumes intended to be mounted by NFS or SMB clients.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: Two volume junctions are planned with conflicting path names. It specifically applies nas junction paths and namespace visibility and mitigates: A healthy volume can remain hidden to clients when it is not joined to the expected namespace path. A practical completion check is: The authorized client resolves and mounts the intended data path, with no unexpected junction collisions.

Incorrect Answers

A:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. The nas junction paths and namespace visibility prerequisite remains unaddressed.

B:

Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow. It changes a different feature than nas junction paths and namespace visibility.

C:

Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees. That change would not implement nas junction paths and namespace visibility.

Question 254

After corrective work for the ONTAP issue 'Two volume junctions are planned with conflicting path names', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.
  2. The host detects the intended block device after proper mapping and no unrelated initiator can access it.
  3. A load test confirms expected write headroom and alerts trigger before the configured aggregate threshold is exhausted.
  4. The authorized client resolves and mounts the intended data path, with no unexpected junction collisions.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: Two volume junctions are planned with conflicting path names. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact. The relevant success criterion is nas junction paths and namespace visibility; this measures a different function.

B:

The host detects the intended block device after proper mapping and no unrelated initiator can access it. That result could pass without demonstrating nas junction paths and namespace visibility.

C:

A load test confirms expected write headroom and alerts trigger before the configured aggregate threshold is exhausted. Acceptance here depends on observing nas junction paths and namespace visibility, not only that test.

Question 255

During a storage operations review for a university research storage team, the team observes: A file-share outage is diagnosed solely from volume online status without checking the namespace. The decision must maintain shared-client safety and reproducible workloads. Which change best corrects the storage design under these conditions?

  1. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  2. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  3. Create and verify a correct NAS junction path in the SVM namespace for volumes intended to be mounted by NFS or SMB clients.
  4. Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: A file-share outage is diagnosed solely from volume online status without checking the namespace. It specifically applies nas junction paths and namespace visibility and mitigates: A healthy volume can remain hidden to clients when it is not joined to the expected namespace path. A practical completion check is: The authorized client resolves and mounts the intended data path, with no unexpected junction collisions.

Incorrect Answers

A:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. That evidence would not isolate nas junction paths and namespace visibility.

B:

Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow. The decisive diagnostic evidence must instead cover nas junction paths and namespace visibility.

D:

Select thin or thick provisioning deliberately based on aggregate free-space monitoring and workload write guarantees. This observation would miss the actual nas junction paths and namespace visibility fault.

Question 256

After corrective work for the ONTAP issue 'A file-share outage is diagnosed solely from volume online status without checking the namespace', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. A load test confirms expected write headroom and alerts trigger before the configured aggregate threshold is exhausted.
  2. The host detects the intended block device after proper mapping and no unrelated initiator can access it.
  3. The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.
  4. The authorized client resolves and mounts the intended data path, with no unexpected junction collisions.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: A file-share outage is diagnosed solely from volume online status without checking the namespace. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

A load test confirms expected write headroom and alerts trigger before the configured aggregate threshold is exhausted. Acceptance here depends on observing nas junction paths and namespace visibility, not only that test.

B:

The host detects the intended block device after proper mapping and no unrelated initiator can access it. It does not establish the requested nas junction paths and namespace visibility outcome.

C:

The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact. The relevant success criterion is nas junction paths and namespace visibility; this measures a different function.

Question 257

During a storage operations review for a regulated healthcare records provider, the team observes: A Windows host cannot see a LUN even though its containing FlexVol is online. The decision must maintain patient data and application recovery obligations. Which ONTAP administration change best addresses the observed failure?

  1. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  2. Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default.
  3. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  4. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: A Windows host cannot see a LUN even though its containing FlexVol is online. It specifically applies lun volume and block object separation and mitigates: A NAS junction path does not by itself map a block device to an initiator or operating system. A practical completion check is: The host detects the intended block device after proper mapping and no unrelated initiator can access it.

Incorrect Answers

B:

Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default. It changes a different feature than lun volume and block object separation.

C:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. That change would not implement lun volume and block object separation.

D:

Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies. The configuration must instead establish lun volume and block object separation.

Question 258

A NetApp ONTAP change review identifies: A Windows host cannot see a LUN even though its containing FlexVol is online. Which consequence should the administrator prioritize in this situation?

  1. A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes.
  2. A NAS junction path does not by itself map a block device to an initiator or operating system.
  3. Unmanaged clone changes and shared-block growth can exhaust capacity or confuse source and test ownership.
  4. Treating FlexGroup constituents as independent user shares can undermine the intended unified namespace and distribution.

Explanation

Correct Answer

B:

This is the directly implicated exposure when a Windows host cannot see a LUN even though its containing FlexVol is online. The relevant corrective control is: Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow. A meaningful acceptance test is: The host detects the intended block device after proper mapping and no unrelated initiator can access it.

Incorrect Answers

A:

A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes. It changes a different feature than lun volume and block object separation.

C:

Unmanaged clone changes and shared-block growth can exhaust capacity or confuse source and test ownership. The configuration must instead establish lun volume and block object separation.

D:

Treating FlexGroup constituents as independent user shares can undermine the intended unified namespace and distribution. The lun volume and block object separation prerequisite remains unaddressed.

Question 259

During a storage operations review for a university research storage team, the team observes: An engineer assigns a NAS junction path as the only SAN provisioning step. The decision must maintain shared-client safety and reproducible workloads. What should the storage administrator do first for the stated requirement?

  1. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  2. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.
  3. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.
  4. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: An engineer assigns a NAS junction path as the only SAN provisioning step. It specifically applies lun volume and block object separation and mitigates: A NAS junction path does not by itself map a block device to an initiator or operating system. A practical completion check is: The host detects the intended block device after proper mapping and no unrelated initiator can access it.

Incorrect Answers

B:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. The configuration must instead establish lun volume and block object separation.

C:

Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies. The lun volume and block object separation prerequisite remains unaddressed.

D:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. It changes a different feature than lun volume and block object separation.

Question 260

A NetApp ONTAP administrator must resolve this situation: An engineer assigns a NAS junction path as the only SAN provisioning step. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.
  2. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  3. Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.
  4. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  5. The host detects the intended block device after proper mapping and no unrelated initiator can access it.

Explanation

Correct Answers

D:

This is the proposed corrective action for: An engineer assigns a NAS junction path as the only SAN provisioning step. The action addresses the ONTAP failure mechanism: A NAS junction path does not by itself map a block device to an initiator or operating system.

E:

This provides separate verification for the same issue: An engineer assigns a NAS junction path as the only SAN provisioning step. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. The paired controls concern lun volume and block object separation, not that measure.

B:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. The lun volume and block object separation implementation and safeguard are still missing.

C:

Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior. It is not the complementary risk control for lun volume and block object separation.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests