mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 22

Question 210

A NetApp ONTAP administrator must resolve this situation: A volume is grown beyond practical available aggregate capacity. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.
  2. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  3. Create and verify a correct NAS junction path in the SVM namespace for volumes intended to be mounted by NFS or SMB clients.
  4. The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.
  5. A clone supports independent writes and the source remains unchanged while shared storage consumption is monitored.

Explanation

Correct Answers

B:

This is the proposed corrective action for: A volume is grown beyond practical available aggregate capacity. The action addresses the ONTAP failure mechanism: A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes.

D:

This provides separate verification for the same issue: A volume is grown beyond practical available aggregate capacity. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies. It is not the complementary risk control for flexvol volume size and aggregate placement.

C:

Create and verify a correct NAS junction path in the SVM namespace for volumes intended to be mounted by NFS or SMB clients. The paired controls concern flexvol volume size and aggregate placement, not that measure.

E:

A clone supports independent writes and the source remains unchanged while shared storage consumption is monitored. The two-part flexvol volume size and aggregate placement control remains unsatisfied.

Question 211

During a storage operations review for a university research storage team, the team observes: A data volume is placed on an already saturated aggregate. The decision must maintain shared-client safety and reproducible workloads. What should the storage administrator do first for the stated requirement?

  1. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  2. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.
  3. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  4. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: A data volume is placed on an already saturated aggregate. It specifically applies flexvol volume size and aggregate placement and mitigates: A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes. A practical completion check is: The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.

Incorrect Answers

B:

Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies. The configuration must instead establish flexvol volume size and aggregate placement.

C:

Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow. The flexvol volume size and aggregate placement prerequisite remains unaddressed.

D:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. It changes a different feature than flexvol volume size and aggregate placement.

Question 212

After corrective work for the ONTAP issue 'A data volume is placed on an already saturated aggregate', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.
  2. The host detects the intended block device after proper mapping and no unrelated initiator can access it.
  3. Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.
  4. Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: A data volume is placed on an already saturated aggregate. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

The host detects the intended block device after proper mapping and no unrelated initiator can access it. The flexvol volume size and aggregate placement prerequisite remains unaddressed.

C:

Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior. It changes a different feature than flexvol volume size and aggregate placement.

D:

Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point. That change would not implement flexvol volume size and aggregate placement.

Question 213

During a storage operations review for a regional managed storage service provider, the team observes: An application team requests a filesystem container but only raw disks are prepared. The decision must maintain tenant boundaries and documented service commitments. Which engineering choice most directly solves this problem?

  1. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  2. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  3. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.
  4. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: An application team requests a filesystem container but only raw disks are prepared. It specifically applies flexvol volume size and aggregate placement and mitigates: A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes. A practical completion check is: The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.

Incorrect Answers

B:

Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow. It changes a different feature than flexvol volume size and aggregate placement.

C:

Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies. That change would not implement flexvol volume size and aggregate placement.

D:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. The configuration must instead establish flexvol volume size and aggregate placement.

Question 214

After corrective work for the ONTAP issue 'An application team requests a filesystem container but only raw disks are prepared', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.
  2. The host detects the intended block device after proper mapping and no unrelated initiator can access it.
  3. Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.
  4. Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: An application team requests a filesystem container but only raw disks are prepared. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

The host detects the intended block device after proper mapping and no unrelated initiator can access it. That result could pass without demonstrating flexvol volume size and aggregate placement.

C:

Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior. Acceptance here depends on observing flexvol volume size and aggregate placement, not only that test.

D:

Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point. It does not establish the requested flexvol volume size and aggregate placement outcome.

Question 215

During a storage operations review for an enterprise disaster recovery review, the team observes: A volume creation succeeds yet the next workload burst runs out of physical space. The decision must maintain preservation of recoverable data under controlled change. Which change best corrects the storage design under these conditions?

  1. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  2. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.
  3. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  4. Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: A volume creation succeeds yet the next workload burst runs out of physical space. It specifically applies flexvol volume size and aggregate placement and mitigates: A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes. A practical completion check is: The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.

Incorrect Answers

B:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. The configuration must instead establish flexvol volume size and aggregate placement.

C:

Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow. The flexvol volume size and aggregate placement prerequisite remains unaddressed.

D:

Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default. It changes a different feature than flexvol volume size and aggregate placement.

Question 216

After corrective work for the ONTAP issue 'A volume creation succeeds yet the next workload burst runs out of physical space', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. The created FlexVol resides on the intended aggregate and a representative write completes with space headroom intact.
  2. The host detects the intended block device after proper mapping and no unrelated initiator can access it.
  3. A clone supports independent writes and the source remains unchanged while shared storage consumption is monitored.
  4. Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: A volume creation succeeds yet the next workload burst runs out of physical space. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

The host detects the intended block device after proper mapping and no unrelated initiator can access it. It does not establish the requested flexvol volume size and aggregate placement outcome.

C:

A clone supports independent writes and the source remains unchanged while shared storage consumption is monitored. The relevant success criterion is flexvol volume size and aggregate placement; this measures a different function.

D:

Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point. That result could pass without demonstrating flexvol volume size and aggregate placement.

Question 217

During a storage operations review for a regional managed storage service provider, the team observes: A massive file repository is split into manually managed unrelated paths despite a single-namespace requirement. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.
  2. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  3. Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow.
  4. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: A massive file repository is split into manually managed unrelated paths despite a single-namespace requirement. It specifically applies flexgroup scale-out nas namespace and mitigates: Treating FlexGroup constituents as independent user shares can undermine the intended unified namespace and distribution. A practical completion check is: Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.

Incorrect Answers

A:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. The flexgroup scale-out nas namespace prerequisite remains unaddressed.

B:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. It changes a different feature than flexgroup scale-out nas namespace.

C:

Provision a SAN LUN or supported NVMe namespace inside an appropriate volume and present it through the correct block protocol workflow. That change would not implement flexgroup scale-out nas namespace.

Question 218

A NetApp ONTAP change review identifies: A massive file repository is split into manually managed unrelated paths despite a single-namespace requirement. Which unresolved risk most directly follows from the observed condition?

  1. A NAS junction path does not by itself map a block device to an initiator or operating system.
  2. Snapshots are not backups against every site failure and excessive retention can increase physical storage usage.
  3. Treating FlexGroup constituents as independent user shares can undermine the intended unified namespace and distribution.
  4. A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes.

Explanation

Correct Answer

C:

This is the directly implicated exposure when a massive file repository is split into manually managed unrelated paths despite a single-namespace requirement. The relevant corrective control is: Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies. A meaningful acceptance test is: Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.

Incorrect Answers

A:

A NAS junction path does not by itself map a block device to an initiator or operating system. It protects a different risk than the flexgroup scale-out nas namespace requirement.

B:

Snapshots are not backups against every site failure and excessive retention can increase physical storage usage. It does not retain the flexgroup scale-out nas namespace control over time.

D:

A volume can show logical free space while its underlying storage tier lacks the blocks needed for incoming writes. That protection can exist while flexgroup scale-out nas namespace is still missing.

Question 219

During a storage operations review for an enterprise disaster recovery review, the team observes: An administrator assumes a FlexGroup constituent is a separate standalone SMB share. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.
  2. Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use.
  3. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  4. Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: An administrator assumes a FlexGroup constituent is a separate standalone SMB share. It specifically applies flexgroup scale-out nas namespace and mitigates: Treating FlexGroup constituents as independent user shares can undermine the intended unified namespace and distribution. A practical completion check is: Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.

Incorrect Answers

B:

Configure ONTAP Snapshot schedules and retention to support recovery-point needs while accounting for changed-block space use. The configuration must instead establish flexgroup scale-out nas namespace.

C:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. The flexgroup scale-out nas namespace prerequisite remains unaddressed.

D:

Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default. It changes a different feature than flexgroup scale-out nas namespace.

Question 220

A NetApp ONTAP administrator must resolve this situation: An administrator assumes a FlexGroup constituent is a separate standalone SMB share. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default.
  2. Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point.
  3. Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics.
  4. Evaluate FlexGroup for large scale-out NAS datasets requiring a single namespace across constituents and supported access policies.
  5. Multiple NAS clients use one FlexGroup namespace and storage or workload telemetry shows the intended constituent behavior.

Explanation

Correct Answers

D:

This is the proposed corrective action for: An administrator assumes a FlexGroup constituent is a separate standalone SMB share. The action addresses the ONTAP failure mechanism: Treating FlexGroup constituents as independent user shares can undermine the intended unified namespace and distribution.

E:

This provides separate verification for the same issue: An administrator assumes a FlexGroup constituent is a separate standalone SMB share. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Create supported FlexClone copies from an appropriate source snapshot for test or recovery workloads without making a complete duplicate by default. The paired controls concern flexgroup scale-out nas namespace, not that measure.

B:

Snapshots appear at the intended intervals and a controlled file restore reaches the approved recovery point. The flexgroup scale-out nas namespace implementation and safeguard are still missing.

C:

Provision a supported FlexVol on an aggregate with adequate physical space, then verify the requested NAS or SAN workload characteristics. It is not the complementary risk control for flexgroup scale-out nas namespace.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests