mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 70

Question 690

A team wants to reuse the same approved DNS and NTP settings across multiple racks without editing every switch individually. Which evidence most directly verifies the intended network outcome?

  1. Confirm every intended consumer receives the updated value and unrelated devices retain their settings.
  2. Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands.
  3. Confirm only approved target devices receive the supplemental command after commit.
  4. Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm every intended consumer receives the updated value and unrelated devices retain their settings. The decisive investigation is to inspect property-set values, consumers and intended scope before updating a shared parameter. The governing principle is that Apstra property sets can centralize reusable named parameters referenced by supported configuration templates.

Incorrect Answers

B:

“Confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands” is associated with a distinct issue: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. By contrast, the actual problem is: A team wants to reuse the same approved DNS and NTP settings across multiple racks without editing every switch individually. Apstra property sets can centralize reusable named parameters referenced by supported configuration templates. The direct acceptance evidence is “Confirm every intended consumer receives the updated value and unrelated devices retain their settings”.

C:

The option “Confirm only approved target devices receive the supplemental command after commit” is useful in a different setting: A new configlet unexpectedly adds a command to spine switches when it was intended for a single border leaf. The case being tested is: A team wants to reuse the same approved DNS and NTP settings across multiple racks without editing every switch individually. Apstra property sets can centralize reusable named parameters referenced by supported configuration templates. The direct acceptance evidence is “Confirm every intended consumer receives the updated value and unrelated devices retain their settings”.

D:

“Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged” is relevant to a different condition: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. The stated question instead concerns: A team wants to reuse the same approved DNS and NTP settings across multiple racks without editing every switch individually. Apstra property sets can centralize reusable named parameters referenced by supported configuration templates. The direct acceptance evidence is “Confirm every intended consumer receives the updated value and unrelated devices retain their settings”.

Question 691

An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. Which initial check would most directly distinguish the likely cause?

  1. Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes.
  2. Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements.
  3. Compare gateway addresses, virtual MAC policy and SVI-to-VNI intent across the affected leafs.
  4. Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop.

Explanation

Correct Answer

B:

This checks the relevant evidence first: inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements. The underlying concept is that edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. After confirming the finding, a controlled remediation is to implement an authorized distributed gateway design and ensure the overlay advertises the required endpoint or prefix routes.

Incorrect Answers

A:

“Inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes” is relevant to a different condition: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. The stated question instead concerns: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. The relevant inspection is: Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements. The most discriminating first check is “Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements”.

C:

“Compare gateway addresses, virtual MAC policy and SVI-to-VNI intent across the affected leafs” is associated with a distinct issue: Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. By contrast, the actual problem is: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. The relevant inspection is: Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements. The most discriminating first check is “Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements”.

D:

The option “Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop” is useful in a different setting: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. The case being tested is: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. The relevant inspection is: Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements. The most discriminating first check is “Inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements”.

Question 692

A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Which design or operational principle best explains this behavior?

  1. The Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model.
  2. Apstra role-based access control separates read visibility from permissions to change managed fabric objects.
  3. Supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation.
  4. Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership.

Explanation

Correct Answer

B:

Apstra role-based access control separates read visibility from permissions to change managed fabric objects. Here, a new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. A useful discriminating check is to inspect the user's role assignments and denied operation in the Apstra access and audit records.

Incorrect Answers

A:

The option “The Apstra server relies on managed device agent connectivity and state collection to maintain an accurate operational model” is useful in a different setting: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. The case being tested is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The controlling principle is “Apstra role-based access control separates read visibility from permissions to change managed fabric objects”.

C:

That choice—“Supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation”—addresses this other problem: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Here the scenario is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The controlling principle is “Apstra role-based access control separates read visibility from permissions to change managed fabric objects”.

D:

“Centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership” is associated with a distinct issue: A site adds a second blueprint operator but needs to ensure simultaneous edits do not bypass change ownership. By contrast, the actual problem is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The controlling principle is “Apstra role-based access control separates read visibility from permissions to change managed fabric objects”.

Question 693

A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Which design or operational principle best explains this behavior?

  1. Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning.
  2. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces.
  3. Blueprint design intent must model necessary fabric roles and external connectivity before deployment.
  4. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements.

Explanation

Correct Answer

D:

reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. Here, a greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. A useful discriminating check is to review intended external service connectivity and supported blueprint reference-design capabilities.

Incorrect Answers

A:

“Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning” is associated with a distinct issue: An architect wants consistent rack scale-out using a reference design rather than independently inventing each fabric topology. By contrast, the actual problem is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The controlling principle is “Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements”.

B:

The option “Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces” is useful in a different setting: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. The case being tested is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The controlling principle is “Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements”.

C:

“Blueprint design intent must model necessary fabric roles and external connectivity before deployment” is relevant to a different condition: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. The stated question instead concerns: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. The controlling principle is “Reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements”.

Question 694

An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. Which evidence most directly verifies the intended network outcome?

  1. Confirm remote VTEP loopbacks resolve to healthy fabric routes and VXLAN tunnel traffic succeeds.
  2. Confirm each leaf reaches other leaves via expected spine paths and no unintended data-center transit loops exist.
  3. Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks.
  4. Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective.

Explanation

Correct Answer

C:

This directly tests the desired result: observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks. The decisive investigation is to inspect underlay routing adjacency, interface addressing and reachability to the spine or leaf loopback endpoints. The governing principle is that an IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly.

Incorrect Answers

A:

That choice—“Confirm remote VTEP loopbacks resolve to healthy fabric routes and VXLAN tunnel traffic succeeds”—addresses this other problem: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. Here the scenario is: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. The direct acceptance evidence is “Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks”.

B:

“Confirm each leaf reaches other leaves via expected spine paths and no unintended data-center transit loops exist” is associated with a distinct issue: A migration plan connects every rack leaf laterally and treats spine devices as only optional edge routers. By contrast, the actual problem is: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. The direct acceptance evidence is “Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks”.

D:

“Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective” is relevant to a different condition: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The stated question instead concerns: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly. The direct acceptance evidence is “Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks”.

Question 695

A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. Which design or operational principle best explains this behavior?

  1. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure.
  2. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations.
  3. Staged blueprint intent can differ from the deployed active revision until approved changes are committed.
  4. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies.

Explanation

Correct Answer

D:

probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. Here, a data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. A useful discriminating check is to inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state.

Incorrect Answers

A:

“An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure” is relevant to a different condition: An operator sees a tenant-service warning while physical switch availability indicators remain green. The stated question instead concerns: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. The controlling principle is “Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies”.

B:

That choice—“Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations”—addresses this other problem: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. Here the scenario is: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. The controlling principle is “Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies”.

C:

“Staged blueprint intent can differ from the deployed active revision until approved changes are committed” is associated with a distinct issue: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. By contrast, the actual problem is: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies. The controlling principle is “Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies”.

Question 696

A site adds a second blueprint operator but needs to ensure simultaneous edits do not bypass change ownership. Which initial check would most directly distinguish the likely cause?

  1. Inspect the user's role assignments and denied operation in the Apstra access and audit records.
  2. Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits.
  3. Compare the restored controller state against live device configuration and the latest known approved revision.
  4. Inspect device-agent health, controller connectivity, authentication and management-path reachability.

Explanation

Correct Answer

B:

This checks the relevant evidence first: review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits. The underlying concept is that centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. After confirming the finding, a controlled remediation is to coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.

Incorrect Answers

A:

The option “Inspect the user's role assignments and denied operation in the Apstra access and audit records” is useful in a different setting: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. The case being tested is: A site adds a second blueprint operator but needs to ensure simultaneous edits do not bypass change ownership. The relevant inspection is: Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits. The most discriminating first check is “Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits”.

C:

That choice—“Compare the restored controller state against live device configuration and the latest known approved revision”—addresses this other problem: An operations team recovers a backup of the controller taken before the most recent fabric changes. Here the scenario is: A site adds a second blueprint operator but needs to ensure simultaneous edits do not bypass change ownership. The relevant inspection is: Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits. The most discriminating first check is “Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits”.

D:

“Inspect device-agent health, controller connectivity, authentication and management-path reachability” is associated with a distinct issue: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. By contrast, the actual problem is: A site adds a second blueprint operator but needs to ensure simultaneous edits do not bypass change ownership. The relevant inspection is: Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits. The most discriminating first check is “Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits”.

Question 697

A team needs to locate generic systems attached to leafs in a single application tag group. Which design or operational principle best explains this behavior?

  1. Graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation.
  2. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint.
  3. Apstra graph queries can combine object attributes and topological relationships for precise selection.
  4. Graph and probe context can correlate multiple anomalies to a shared physical or logical source.

Explanation

Correct Answer

C:

Apstra graph queries can combine object attributes and topological relationships for precise selection. Here, a team needs to locate generic systems attached to leafs in a single application tag group. A useful discriminating check is to test a query for tag attributes and related generic-system attachments in the target blueprint.

Incorrect Answers

A:

“Graph query results reflect the modeled topology and may reveal missing or misassigned relationships that need validation” is associated with a distinct issue: An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. By contrast, the actual problem is: A team needs to locate generic systems attached to leafs in a single application tag group. Apstra graph queries can combine object attributes and topological relationships for precise selection. The controlling principle is “Apstra graph queries can combine object attributes and topological relationships for precise selection”.

B:

The option “Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint” is useful in a different setting: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. The case being tested is: A team needs to locate generic systems attached to leafs in a single application tag group. Apstra graph queries can combine object attributes and topological relationships for precise selection. The controlling principle is “Apstra graph queries can combine object attributes and topological relationships for precise selection”.

D:

That choice—“Graph and probe context can correlate multiple anomalies to a shared physical or logical source”—addresses this other problem: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. Here the scenario is: A team needs to locate generic systems attached to leafs in a single application tag group. Apstra graph queries can combine object attributes and topological relationships for precise selection. The controlling principle is “Apstra graph queries can combine object attributes and topological relationships for precise selection”.

Question 698

A template identifies uplink ports by logical role but a new hardware SKU has different port naming. Which initial check would most directly distinguish the likely cause?

  1. Compare the selected hardware profile, breakout mode and logical interface requirements before deploying.
  2. Inspect the interface map and assigned logical device port roles for overlapping reservations.
  3. Review logical-to-physical interface mappings and device profile nomenclature for the new platform.
  4. Calculate required leaf uplinks and available spine ports for projected growth under the topology template.

Explanation

Correct Answer

C:

This checks the relevant evidence first: review logical-to-physical interface mappings and device profile nomenclature for the new platform. The underlying concept is that logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. After confirming the finding, a controlled remediation is to apply a supported interface map that binds each logical fabric role to the intended physical port.

Incorrect Answers

A:

That choice—“Compare the selected hardware profile, breakout mode and logical interface requirements before deploying”—addresses this other problem: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Here the scenario is: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. The relevant inspection is: Review logical-to-physical interface mappings and device profile nomenclature for the new platform. The most discriminating first check is “Review logical-to-physical interface mappings and device profile nomenclature for the new platform”.

B:

“Inspect the interface map and assigned logical device port roles for overlapping reservations” is associated with a distinct issue: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. By contrast, the actual problem is: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. The relevant inspection is: Review logical-to-physical interface mappings and device profile nomenclature for the new platform. The most discriminating first check is “Review logical-to-physical interface mappings and device profile nomenclature for the new platform”.

D:

“Calculate required leaf uplinks and available spine ports for projected growth under the topology template” is relevant to a different condition: A site plans to double leaf count next year while reserving no interface or port-speed headroom. The stated question instead concerns: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. The relevant inspection is: Review logical-to-physical interface mappings and device profile nomenclature for the new platform. The most discriminating first check is “Review logical-to-physical interface mappings and device profile nomenclature for the new platform”.

Question 699

A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. Which controlled change best addresses the described requirement?

  1. Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration.
  2. Configure sufficient supported underlay MTU along the fabric path or safely adjust payload MTU.
  3. Use the supported EVPN control plane and verify route import for the intended virtual network.
  4. Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state.

Explanation

Correct Answer

D:

This action addresses the stated defect: restore routed reachability to the advertised VTEP and the correct tunnel forwarding state. The underlying constraint is that a VTEP provides VXLAN encapsulation and decapsulation and its IP reachability must exist independently of bridge membership. Verify rather than assume success: confirm encapsulated packets reach the intended VTEP and are decapsulated to the authorized bridge domain.

Incorrect Answers

A:

“Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration” is relevant to a different condition: A rack migration assigns the correct switch access VLAN but places the VTEP into another tenant's virtual network identifier. The stated question instead concerns: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state. The most relevant correction is “Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state”.

B:

That choice—“Configure sufficient supported underlay MTU along the fabric path or safely adjust payload MTU”—addresses this other problem: A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. Here the scenario is: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state. The most relevant correction is “Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state”.

C:

“Use the supported EVPN control plane and verify route import for the intended virtual network” is associated with a distinct issue: A team wants scalable MAC learning across the fabric rather than sending every remote MAC advertisement by flood. By contrast, the actual problem is: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state. The most relevant correction is “Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state”.

Question 700

An application requires a supported vendor-specific setting absent from the blueprint's default rendered commands. Which controlled change best addresses the described requirement?

  1. Narrow configlet selectors or tags and stage a validated corrective revision.
  2. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration.
  3. Update the approved property set and stage dependent configurations through normal blueprint review.
  4. Investigate unexpected changes using the appropriate generated-config view and approved override workflow.

Explanation

Correct Answer

B:

This action addresses the stated defect: create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The underlying constraint is that configlets can extend generated device configuration through controlled, scoped supplemental configuration. Verify rather than assume success: confirm only intended device interfaces or nodes receive the supplemental settings without conflicting commands.

Incorrect Answers

A:

The option “Narrow configlet selectors or tags and stage a validated corrective revision” is useful in a different setting: An engineer discovers that a supplemental configuration template was bound to an overly broad tag. The case being tested is: An application requires a supported vendor-specific setting absent from the blueprint's default rendered commands. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The most relevant correction is “Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration”.

C:

That choice—“Update the approved property set and stage dependent configurations through normal blueprint review”—addresses this other problem: A blueprint operator maintains repeated data center operational variables that should have a single validated definition. Here the scenario is: An application requires a supported vendor-specific setting absent from the blueprint's default rendered commands. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The most relevant correction is “Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration”.

D:

“Investigate unexpected changes using the appropriate generated-config view and approved override workflow” is associated with a distinct issue: An audit asks why some device commands come from the baseline while others appear from intended virtual-network configuration. By contrast, the actual problem is: An application requires a supported vendor-specific setting absent from the blueprint's default rendered commands. Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration. The most relevant correction is “Create a narrowly scoped reviewed configlet and validate the resulting generated device configuration”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests