mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 65

Question 640

A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. Which shortcut would be most likely to undermine this objective?

  1. Jump to an old revision without checking uncommitted changes or notifying their owners.
  2. Use a historical revision rollback for every minor uncommitted typo without inspecting scope.
  3. Assume a Time Voyager selection automatically and safely restores every external system without review.
  4. Treat all past revisions as guaranteed deployable regardless of later hardware and resource changes.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: use a historical revision rollback for every minor uncommitted typo without inspecting scope. It violates the principle that reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. An appropriate alternative is to revert the specific uncommitted edit rather than rolling back an unrelated committed revision.

Incorrect Answers

A:

The option “Jump to an old revision without checking uncommitted changes or notifying their owners” is useful in a different setting: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. The case being tested is: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. The directly relevant unsafe shortcut is “Use a historical revision rollback for every minor uncommitted typo without inspecting scope”.

C:

That choice—“Assume a Time Voyager selection automatically and safely restores every external system without review”—addresses this other problem: A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. Here the scenario is: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. The directly relevant unsafe shortcut is “Use a historical revision rollback for every minor uncommitted typo without inspecting scope”.

D:

“Treat all past revisions as guaranteed deployable regardless of later hardware and resource changes” is associated with a distinct issue: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. By contrast, the actual problem is: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. The directly relevant unsafe shortcut is “Use a historical revision rollback for every minor uncommitted typo without inspecting scope”.

Question 641

Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Which evidence most directly verifies the intended network outcome?

  1. Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF.
  2. Observe each VRF learns only the intended tenant routes despite overlapping address space.
  3. Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic.
  4. Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network.

Explanation

Correct Answer

D:

This directly tests the desired result: observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network. The decisive investigation is to inspect per-VRF and per-virtual-network route target communities and import/export decisions. The governing principle is that matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability.

Incorrect Answers

A:

“Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF” is associated with a distinct issue: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. By contrast, the actual problem is: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The direct acceptance evidence is “Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network”.

B:

The option “Observe each VRF learns only the intended tenant routes despite overlapping address space” is useful in a different setting: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. The case being tested is: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The direct acceptance evidence is “Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network”.

C:

“Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic” is relevant to a different condition: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. The stated question instead concerns: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The direct acceptance evidence is “Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network”.

Question 642

A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. Which shortcut would be most likely to undermine this objective?

  1. Label a single-leaf rack as redundant merely because it has two host-facing ports.
  2. Ignore port and oversubscription limits because Apstra can generate logical connections automatically.
  3. Create a new ad hoc rack type for every identical rack without checking design drift.
  4. Count two cables as independent redundancy even when both share the same single upstream switch.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: ignore port and oversubscription limits because Apstra can generate logical connections automatically. It violates the principle that total spine capacity includes available physical ports and supported link-speed and topology constraints. An appropriate alternative is to expand spine capacity or rescope rack additions under a supported topology design.

Incorrect Answers

A:

That choice—“Label a single-leaf rack as redundant merely because it has two host-facing ports”—addresses this other problem: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. Here the scenario is: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. Total spine capacity includes available physical ports and supported link-speed and topology constraints. The directly relevant unsafe shortcut is “Ignore port and oversubscription limits because Apstra can generate logical connections automatically”.

C:

The option “Create a new ad hoc rack type for every identical rack without checking design drift” is useful in a different setting: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. The case being tested is: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. Total spine capacity includes available physical ports and supported link-speed and topology constraints. The directly relevant unsafe shortcut is “Ignore port and oversubscription limits because Apstra can generate logical connections automatically”.

D:

“Count two cables as independent redundancy even when both share the same single upstream switch” is relevant to a different condition: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The stated question instead concerns: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. Total spine capacity includes available physical ports and supported link-speed and topology constraints. The directly relevant unsafe shortcut is “Ignore port and oversubscription limits because Apstra can generate logical connections automatically”.

Question 643

An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. Which evidence most directly verifies the intended network outcome?

  1. Confirm latency measurements and anomaly state return within accepted bounds under representative traffic.
  2. Confirm the root metric stabilizes and correlated anomalies across dependent probes clear.
  3. Verify objective service and interface measurements improve and a valid probe no longer detects an anomaly.
  4. Verify staged derived metrics match sample inputs and test threshold crossings produce accurate alarms.

Explanation

Correct Answer

C:

This directly tests the desired result: verify objective service and interface measurements improve and a valid probe no longer detects an anomaly. The decisive investigation is to compare live raw telemetry, probe thresholds and application SLOs before and after the change. The governing principle is that a cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion.

Incorrect Answers

A:

“Confirm latency measurements and anomaly state return within accepted bounds under representative traffic” is relevant to a different condition: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. The stated question instead concerns: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The direct acceptance evidence is “Verify objective service and interface measurements improve and a valid probe no longer detects an anomaly”.

B:

That choice—“Confirm the root metric stabilizes and correlated anomalies across dependent probes clear”—addresses this other problem: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. Here the scenario is: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The direct acceptance evidence is “Verify objective service and interface measurements improve and a valid probe no longer detects an anomaly”.

D:

The option “Verify staged derived metrics match sample inputs and test threshold crossings produce accurate alarms” is useful in a different setting: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The case being tested is: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The direct acceptance evidence is “Verify objective service and interface measurements improve and a valid probe no longer detects an anomaly”.

Question 644

An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. Which controlled change best addresses the described requirement?

  1. Expand or assign a correctly scoped resource pool without overlapping existing allocations.
  2. Apply consistent approved tags and verify the automation selector matches only the intended objects.
  3. Use validated unique VNI allocations or partition resource pools according to approved boundaries.
  4. Use a compatible logical device and device profile combination with sufficient supported host ports.

Explanation

Correct Answer

C:

This action addresses the stated defect: use validated unique VNI allocations or partition resource pools according to approved boundaries. The underlying constraint is that managed VNI and other logical resource pools reduce collision risk when correctly partitioned and allocated. Verify rather than assume success: confirm each active virtual network has the intended unique or explicitly shared VNI mapping.

Incorrect Answers

A:

The option “Expand or assign a correctly scoped resource pool without overlapping existing allocations” is useful in a different setting: An Apstra design runs out of loopback addresses when adding an additional leaf group. The case being tested is: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. The governing requirement is to use validated unique VNI allocations or partition resource pools according to approved boundaries. The most relevant correction is “Use validated unique VNI allocations or partition resource pools according to approved boundaries”.

B:

“Apply consistent approved tags and verify the automation selector matches only the intended objects” is relevant to a different condition: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. The stated question instead concerns: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. The governing requirement is to use validated unique VNI allocations or partition resource pools according to approved boundaries. The most relevant correction is “Use validated unique VNI allocations or partition resource pools according to approved boundaries”.

D:

“Use a compatible logical device and device profile combination with sufficient supported host ports” is associated with a distinct issue: A site models 48 server attachments using a logical device profile that exposes only 32 suitable host interfaces. By contrast, the actual problem is: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. The governing requirement is to use validated unique VNI allocations or partition resource pools according to approved boundaries. The most relevant correction is “Use validated unique VNI allocations or partition resource pools according to approved boundaries”.

Question 645

An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. Which design or operational principle best explains this behavior?

  1. Device health, intended active blueprint state and pending staged edits describe different dimensions of operations.
  2. The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications.
  3. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision.
  4. Staged blueprint intent can differ from the deployed active revision until approved changes are committed.

Explanation

Correct Answer

D:

staged blueprint intent can differ from the deployed active revision until approved changes are committed. Here, an engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. A useful discriminating check is to compare staged differences with active configuration and deployment status before testing production traffic.

Incorrect Answers

A:

“Device health, intended active blueprint state and pending staged edits describe different dimensions of operations” is associated with a distinct issue: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. By contrast, the actual problem is: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. Staged blueprint intent can differ from the deployed active revision until approved changes are committed. The controlling principle is “Staged blueprint intent can differ from the deployed active revision until approved changes are committed”.

B:

The option “The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications” is useful in a different setting: A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. The case being tested is: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. Staged blueprint intent can differ from the deployed active revision until approved changes are committed. The controlling principle is “Staged blueprint intent can differ from the deployed active revision until approved changes are committed”.

C:

“Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision” is relevant to a different condition: A designer notices an accidental rack parameter change before any blueprint commit has occurred. The stated question instead concerns: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. Staged blueprint intent can differ from the deployed active revision until approved changes are committed. The controlling principle is “Staged blueprint intent can differ from the deployed active revision until approved changes are committed”.

Question 646

A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. Which initial check would most directly distinguish the likely cause?

  1. Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability.
  2. Inspect broadcast, unknown-unicast and multicast handling and participating VTEPs for the affected VNI.
  3. Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs.
  4. Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent.

Explanation

Correct Answer

C:

This checks the relevant evidence first: trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs. The underlying concept is that VXLAN adds encapsulation overhead and requires adequate path MTU or effective payload sizing. After confirming the finding, a controlled remediation is to configure sufficient supported underlay MTU along the fabric path or safely adjust payload MTU.

Incorrect Answers

A:

That choice—“Inspect VTEP loopback next-hop resolution, VXLAN encapsulation and underlay reachability”—addresses this other problem: An endpoint's remote leaf cannot deliver traffic even though the local access VLAN is assigned correctly because the tunnel endpoint is unreachable. Here the scenario is: A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs. The most discriminating first check is “Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs”.

B:

“Inspect broadcast, unknown-unicast and multicast handling and participating VTEPs for the affected VNI” is associated with a distinct issue: A fabric sees unexpectedly broad BUM traffic after a new VXLAN virtual network is provisioned. By contrast, the actual problem is: A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs. The most discriminating first check is “Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs”.

D:

“Inspect the VLAN-to-VNI bindings on both local and remote VTEPs and compare the blueprint virtual-network intent” is relevant to a different condition: A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. The stated question instead concerns: A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs. The most discriminating first check is “Trace effective underlay MTU and path fragmentation or drop counters between the participating VTEPs”.

Question 647

A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Which shortcut would be most likely to undermine this objective?

  1. Assume a single tag-text search always represents every intended server-to-leaf relationship.
  2. Delete any graph node that appears isolated without checking whether it represents a real device.
  3. Match every interface whose label includes the rack number without checking topology relationships.
  4. Declare recovery solely from a green dashboard after suppressing all probe alerts.

Explanation

Correct Answer

C:

This is the unsafe shortcut to avoid: match every interface whose label includes the rack number without checking topology relationships. It violates the principle that graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. An appropriate alternative is to construct a scoped graph query based on blueprint entities and their physical connectivity.

Incorrect Answers

A:

“Assume a single tag-text search always represents every intended server-to-leaf relationship” is relevant to a different condition: An operations dashboard must report which workload attachments inherit a specific project label. The stated question instead concerns: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The directly relevant unsafe shortcut is “Match every interface whose label includes the rack number without checking topology relationships”.

B:

That choice—“Delete any graph node that appears isolated without checking whether it represents a real device”—addresses this other problem: An Apstra graph search reveals a workload object disconnected from its expected virtual-network relation. Here the scenario is: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The directly relevant unsafe shortcut is “Match every interface whose label includes the rack number without checking topology relationships”.

D:

The option “Declare recovery solely from a green dashboard after suppressing all probe alerts” is useful in a different setting: An operator marks IBA alarms resolved by weakening thresholds while the original interface drops continue. The case being tested is: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Graph Explorer and relationship-aware graph queries help identify modeled nodes and edges within a blueprint. The directly relevant unsafe shortcut is “Match every interface whose label includes the rack number without checking topology relationships”.

Question 648

A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. Which initial check would most directly distinguish the likely cause?

  1. Inspect the proposed external or shared-services routing path, import policy and required security controls.
  2. Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements.
  3. Compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment.
  4. Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy.

Explanation

Correct Answer

A:

This checks the relevant evidence first: inspect the proposed external or shared-services routing path, import policy and required security controls. The underlying concept is that shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation. After confirming the finding, a controlled remediation is to create a controlled service insertion or external routing policy permitting only approved shared-service prefixes.

Incorrect Answers

B:

“Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements” is relevant to a different condition: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The stated question instead concerns: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. The relevant inspection is: Inspect the proposed external or shared-services routing path, import policy and required security controls. The most discriminating first check is “Inspect the proposed external or shared-services routing path, import policy and required security controls”.

C:

That choice—“Compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment”—addresses this other problem: A virtualized server moves to another rack and vCenter shows the correct network label while the fabric lacks the required VN attachment. Here the scenario is: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. The relevant inspection is: Inspect the proposed external or shared-services routing path, import policy and required security controls. The most discriminating first check is “Inspect the proposed external or shared-services routing path, import policy and required security controls”.

D:

“Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy” is associated with a distinct issue: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. By contrast, the actual problem is: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. The relevant inspection is: Inspect the proposed external or shared-services routing path, import policy and required security controls. The most discriminating first check is “Inspect the proposed external or shared-services routing path, import policy and required security controls”.

Question 649

A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. Which initial check would most directly distinguish the likely cause?

  1. Review single-versus-dual leaf rack settings and server connectivity requirements.
  2. Inspect rack type properties and compare the proposed rack's connectivity with its validated peers.
  3. Inspect the rack type's expected spine attachment graph and actual cable endpoints.
  4. Review consumed spine port counts, interface maps and oversubscription projections.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect the rack type's expected spine attachment graph and actual cable endpoints. The underlying concept is that physical topology diversity is necessary to avoid a common point of failure when rack redundancy is required. After confirming the finding, a controlled remediation is to correct the cable plan to use approved physically independent spine paths.

Incorrect Answers

A:

“Review single-versus-dual leaf rack settings and server connectivity requirements” is associated with a distinct issue: A rack designer wants a redundant host attachment pattern for critical appliances. By contrast, the actual problem is: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The relevant inspection is: Inspect the rack type's expected spine attachment graph and actual cable endpoints. The most discriminating first check is “Inspect the rack type's expected spine attachment graph and actual cable endpoints”.

B:

The option “Inspect rack type properties and compare the proposed rack's connectivity with its validated peers” is useful in a different setting: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. The case being tested is: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The relevant inspection is: Inspect the rack type's expected spine attachment graph and actual cable endpoints. The most discriminating first check is “Inspect the rack type's expected spine attachment graph and actual cable endpoints”.

D:

That choice—“Review consumed spine port counts, interface maps and oversubscription projections”—addresses this other problem: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Here the scenario is: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The relevant inspection is: Inspect the rack type's expected spine attachment graph and actual cable endpoints. The most discriminating first check is “Inspect the rack type's expected spine attachment graph and actual cable endpoints”.

Question 650

A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. Which controlled change best addresses the described requirement?

  1. Configure an approved probe or probe-stage threshold for the scoped leaf group and validate its data collection.
  2. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics.
  3. Configure the supported aggregation and alert conditions with documented baseline behavior.
  4. Construct a scoped graph query based on blueprint entities and their physical connectivity.

Explanation

Correct Answer

B:

This action addresses the stated defect: narrow the query and probe stages to the correct blueprint nodes and monitored metrics. The underlying constraint is that an IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. Verify rather than assume success: confirm only the intended rack or tenant objects generate results and anomalies on repeat tests.

Incorrect Answers

A:

That choice—“Configure an approved probe or probe-stage threshold for the scoped leaf group and validate its data collection”—addresses this other problem: A monitoring team wants to detect rising discards on the uplinks of one specific leaf group. Here the scenario is: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics. The most relevant correction is “Narrow the query and probe stages to the correct blueprint nodes and monitored metrics”.

C:

The option “Configure the supported aggregation and alert conditions with documented baseline behavior” is useful in a different setting: A team wants an analytics alert if interface utilization deviates from baseline while still retaining raw evidence. The case being tested is: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics. The most relevant correction is “Narrow the query and probe stages to the correct blueprint nodes and monitored metrics”.

D:

“Construct a scoped graph query based on blueprint entities and their physical connectivity” is relevant to a different condition: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. The stated question instead concerns: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics. The most relevant correction is “Narrow the query and probe stages to the correct blueprint nodes and monitored metrics”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests