mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 51

Question 500

Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. Which evidence most directly verifies the intended network outcome?

  1. Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network.
  2. Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF.
  3. Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic.
  4. Observe each VRF learns only the intended tenant routes despite overlapping address space.

Explanation

Correct Answer

D:

This directly tests the desired result: observe each VRF learns only the intended tenant routes despite overlapping address space. The decisive investigation is to compare route distinguishers, route targets and actual VRF import policy for each tenant. The governing principle is that EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution.

Incorrect Answers

A:

The option “Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network” is useful in a different setting: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. The case being tested is: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The direct acceptance evidence is “Observe each VRF learns only the intended tenant routes despite overlapping address space”.

B:

“Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF” is relevant to a different condition: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. The stated question instead concerns: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The direct acceptance evidence is “Observe each VRF learns only the intended tenant routes despite overlapping address space”.

C:

That choice—“Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic”—addresses this other problem: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. Here the scenario is: Two tenants use overlapping private subnets and the team fears one tenant's routes will be mistaken for the other. EVPN route distinguishers distinguish otherwise identical route identifiers while route targets govern intended import and export distribution. The direct acceptance evidence is “Observe each VRF learns only the intended tenant routes despite overlapping address space”.

Question 501

A designer notices an accidental rack parameter change before any blueprint commit has occurred. Which controlled change best addresses the described requirement?

  1. Select the approved prior revision, review resulting uncommitted differences and commit the rollback following change control.
  2. Resolve outstanding staged work, then perform the approved Time Voyager workflow.
  3. Revert the specific uncommitted edit rather than rolling back an unrelated committed revision.
  4. Resolve conflicting device and resource mappings before committing a controlled rollback.

Explanation

Correct Answer

C:

This action addresses the stated defect: revert the specific uncommitted edit rather than rolling back an unrelated committed revision. The underlying constraint is that reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. Verify rather than assume success: confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged.

Incorrect Answers

A:

“Select the approved prior revision, review resulting uncommitted differences and commit the rollback following change control” is associated with a distinct issue: A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. By contrast, the actual problem is: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Revert the specific uncommitted edit rather than rolling back an unrelated committed revision. The most relevant correction is “Revert the specific uncommitted edit rather than rolling back an unrelated committed revision”.

B:

The option “Resolve outstanding staged work, then perform the approved Time Voyager workflow” is useful in a different setting: A scheduled rollback would occur while an unrelated approved feature configuration remains uncommitted. The case being tested is: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Revert the specific uncommitted edit rather than rolling back an unrelated committed revision. The most relevant correction is “Revert the specific uncommitted edit rather than rolling back an unrelated committed revision”.

D:

That choice—“Resolve conflicting device and resource mappings before committing a controlled rollback”—addresses this other problem: An engineer wants to return to a blueprint commit created before several resource pool and hardware changes. Here the scenario is: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Revert the specific uncommitted edit rather than rolling back an unrelated committed revision. The most relevant correction is “Revert the specific uncommitted edit rather than rolling back an unrelated committed revision”.

Question 502

A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Which shortcut would be most likely to undermine this objective?

  1. Dismiss all service anomalies merely because the underlying physical links are up.
  2. Delete the probe because no service-configuration mismatch appears on the dashboard.
  3. Interpret a green dashboard as proof that every staged change has already been committed.
  4. Reboot every leaf because all anomaly types allegedly mean the same physical fault.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: reboot every leaf because all anomaly types allegedly mean the same physical fault. It violates the principle that Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. An appropriate alternative is to route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence.

Incorrect Answers

A:

That choice—“Dismiss all service anomalies merely because the underlying physical links are up”—addresses this other problem: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Here the scenario is: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The directly relevant unsafe shortcut is “Reboot every leaf because all anomaly types allegedly mean the same physical fault”.

B:

“Delete the probe because no service-configuration mismatch appears on the dashboard” is associated with a distinct issue: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. By contrast, the actual problem is: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The directly relevant unsafe shortcut is “Reboot every leaf because all anomaly types allegedly mean the same physical fault”.

C:

The option “Interpret a green dashboard as proof that every staged change has already been committed” is useful in a different setting: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. The case being tested is: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The directly relevant unsafe shortcut is “Reboot every leaf because all anomaly types allegedly mean the same physical fault”.

Question 503

A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Which design or operational principle best explains this behavior?

  1. DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites.
  2. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service.
  3. Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation.
  4. Connectivity templates define host-facing virtual-network endpoint membership and tagging behavior.

Explanation

Correct Answer

B:

hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. Here, a VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. A useful discriminating check is to compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment.

Incorrect Answers

A:

“DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites” is relevant to a different condition: A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. The stated question instead concerns: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The controlling principle is “Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service”.

C:

“Shared-service connectivity must be explicitly routed and filtered without collapsing tenant VRF isolation” is associated with a distinct issue: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. By contrast, the actual problem is: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The controlling principle is “Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service”.

D:

The option “Connectivity templates define host-facing virtual-network endpoint membership and tagging behavior” is useful in a different setting: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. The case being tested is: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The controlling principle is “Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service”.

Question 504

A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Which evidence most directly verifies the intended network outcome?

  1. Verify syntax validation and successful controlled deployment to representative supported devices.
  2. Confirm the blueprint build validation clears and expected rendered configurations are available for review.
  3. Confirm each targeted blueprint reflects the expected revision and existing production services remain healthy.
  4. Confirm the modeled external links and routing connectivity satisfy the acceptance topology.

Explanation

Correct Answer

A:

This directly tests the desired result: verify syntax validation and successful controlled deployment to representative supported devices. The decisive investigation is to inspect selected template, interface map, device profile and advertised NOS capabilities. The governing principle is that blueprint templates, device profiles and NOS-specific rendering must align to the supported combination.

Incorrect Answers

B:

“Confirm the blueprint build validation clears and expected rendered configurations are available for review” is relevant to a different condition: An Apstra designer tries to deploy a rack without allocating required underlay interface and IP pools. The stated question instead concerns: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The direct acceptance evidence is “Verify syntax validation and successful controlled deployment to representative supported devices”.

C:

That choice—“Confirm each targeted blueprint reflects the expected revision and existing production services remain healthy”—addresses this other problem: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. Here the scenario is: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The direct acceptance evidence is “Verify syntax validation and successful controlled deployment to representative supported devices”.

D:

“Confirm the modeled external links and routing connectivity satisfy the acceptance topology” is associated with a distinct issue: An engineer finishes a fabric template without any modeled north-south peering attachment points. By contrast, the actual problem is: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The direct acceptance evidence is “Verify syntax validation and successful controlled deployment to representative supported devices”.

Question 505

A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Which shortcut would be most likely to undermine this objective?

  1. Swap arbitrary port assignments in production without reviewing topology role requirements.
  2. Mark the whole deployment complete when a single leaf reports success.
  3. Keep duplicate system IDs because the switches belong to the same rack type.
  4. Ignore LLDP mismatches because link LEDs are illuminated.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: ignore LLDP mismatches because link LEDs are illuminated. It violates the principle that cabling validation compares observed neighbor links against intended device/interface relationships. An appropriate alternative is to correct physical cabling or update the approved design only after confirming the intended topology.

Incorrect Answers

A:

“Swap arbitrary port assignments in production without reviewing topology role requirements” is associated with a distinct issue: A staging team has different cable-map snapshots from design and observed discovery data. By contrast, the actual problem is: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Cabling validation compares observed neighbor links against intended device/interface relationships. The directly relevant unsafe shortcut is “Ignore LLDP mismatches because link LEDs are illuminated”.

B:

The option “Mark the whole deployment complete when a single leaf reports success” is useful in a different setting: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. The case being tested is: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Cabling validation compares observed neighbor links against intended device/interface relationships. The directly relevant unsafe shortcut is “Ignore LLDP mismatches because link LEDs are illuminated”.

C:

“Keep duplicate system IDs because the switches belong to the same rack type” is relevant to a different condition: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. The stated question instead concerns: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Cabling validation compares observed neighbor links against intended device/interface relationships. The directly relevant unsafe shortcut is “Ignore LLDP mismatches because link LEDs are illuminated”.

Question 506

A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. Which shortcut would be most likely to undermine this objective?

  1. Treat absence of a service configuration anomaly as proof that every application performance metric is normal.
  2. Disable all analytics probes because several symptoms share the same source device.
  3. Delete any graph node that appears isolated without checking whether it represents a real device.
  4. Declare recovery solely from a green dashboard after suppressing all probe alerts.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: declare recovery solely from a green dashboard after suppressing all probe alerts. It violates the principle that a cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. An appropriate alternative is to restore justified monitoring sensitivity and remediate the measured issue instead of hiding it.

Incorrect Answers

A:

That choice—“Treat absence of a service configuration anomaly as proof that every application performance metric is normal”—addresses this other problem: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Here the scenario is: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The directly relevant unsafe shortcut is “Declare recovery solely from a green dashboard after suppressing all probe alerts”.

B:

“Disable all analytics probes because several symptoms share the same source device” is associated with a distinct issue: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. By contrast, the actual problem is: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The directly relevant unsafe shortcut is “Declare recovery solely from a green dashboard after suppressing all probe alerts”.

C:

The option “Delete any graph node that appears isolated without checking whether it represents a real device” is useful in a different setting: A visualization shows an unexpected isolated node and an engineer wants to know whether it reflects a genuine modeling error. The case being tested is: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. A cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. The directly relevant unsafe shortcut is “Declare recovery solely from a green dashboard after suppressing all probe alerts”.

Question 507

An Apstra blueprint expects a set of spine interfaces but physical inventory maps uplinks to different ports. Which shortcut would be most likely to undermine this objective?

  1. Swap arbitrary port assignments in production without reviewing topology role requirements.
  2. Ignore LLDP mismatches because link LEDs are illuminated.
  3. Mark the whole deployment complete when a single leaf reports success.
  4. Delete the old blueprint and recreate every tenant because one hardware identifier changed.

Explanation

Correct Answer

A:

This is the unsafe shortcut to avoid: swap arbitrary port assignments in production without reviewing topology role requirements. It violates the principle that cable-map discrepancies should be reconciled before traffic flows through an unvalidated physical fabric. An appropriate alternative is to update the correct physical patching or approved blueprint mapping in one controlled change.

Incorrect Answers

B:

That choice—“Ignore LLDP mismatches because link LEDs are illuminated”—addresses this other problem: A live rack cable is connected to the wrong spine port compared with the blueprint's intended cable map. Here the scenario is: An Apstra blueprint expects a set of spine interfaces but physical inventory maps uplinks to different ports. Cable-map discrepancies should be reconciled before traffic flows through an unvalidated physical fabric. The directly relevant unsafe shortcut is “Swap arbitrary port assignments in production without reviewing topology role requirements”.

C:

“Mark the whole deployment complete when a single leaf reports success” is associated with a distinct issue: A new switch reports Ready while its peers remain in a deployment-failed state after committing fabric intent. By contrast, the actual problem is: An Apstra blueprint expects a set of spine interfaces but physical inventory maps uplinks to different ports. Cable-map discrepancies should be reconciled before traffic flows through an unvalidated physical fabric. The directly relevant unsafe shortcut is “Swap arbitrary port assignments in production without reviewing topology role requirements”.

D:

The option “Delete the old blueprint and recreate every tenant because one hardware identifier changed” is useful in a different setting: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. The case being tested is: An Apstra blueprint expects a set of spine interfaces but physical inventory maps uplinks to different ports. Cable-map discrepancies should be reconciled before traffic flows through an unvalidated physical fabric. The directly relevant unsafe shortcut is “Swap arbitrary port assignments in production without reviewing topology role requirements”.

Question 508

A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. Which initial check would most directly distinguish the likely cause?

  1. Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy.
  2. Inspect the route export/import policy and observed advertised routes for the affected VRF.
  3. Inspect the generic-system interface and assigned VN tagging primitives in the relevant connectivity template.
  4. Inspect the proposed external or shared-services routing path, import policy and required security controls.

Explanation

Correct Answer

A:

This checks the relevant evidence first: inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy. The underlying concept is that connectivity templates can describe supported external routing sessions and attach them to the intended routing zone. After confirming the finding, a controlled remediation is to create or correct a scoped connectivity template and routing policy for the authorized VRF.

Incorrect Answers

B:

“Inspect the route export/import policy and observed advertised routes for the affected VRF” is relevant to a different condition: A route export template applied to a border device advertises all tenant prefixes beyond the data center. The stated question instead concerns: A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. The relevant inspection is: Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy. The most discriminating first check is “Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy”.

C:

That choice—“Inspect the generic-system interface and assigned VN tagging primitives in the relevant connectivity template”—addresses this other problem: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. Here the scenario is: A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. The relevant inspection is: Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy. The most discriminating first check is “Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy”.

D:

“Inspect the proposed external or shared-services routing path, import policy and required security controls” is associated with a distinct issue: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. By contrast, the actual problem is: A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. The relevant inspection is: Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy. The most discriminating first check is “Inspect border-leaf interfaces, attached connectivity template and tenant-specific routing policy”.

Question 509

A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. Which design or operational principle best explains this behavior?

  1. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context.
  2. Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design.
  3. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary.
  4. Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries.

Explanation

Correct Answer

C:

a virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. Here, a newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. A useful discriminating check is to inspect the VN's routing-zone binding, SVI and VRF route lookup on the affected leaf.

Incorrect Answers

A:

“A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context” is associated with a distinct issue: A user asks whether a single tenant routing zone can include multiple Layer 2 VNs attached to different racks. By contrast, the actual problem is: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. The controlling principle is “A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary”.

B:

The option “Apstra routing zones and VRFs separate tenant Layer 3 routing contexts, allowing overlapping IP ranges by design” is useful in a different setting: A provider wants separate customer routing domains that can reuse 10.10.0.0/16 without ambiguity. The case being tested is: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. The controlling principle is “A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary”.

D:

That choice—“Routing policy and connectivity-template scope determine which tenant prefixes cross external boundaries”—addresses this other problem: A route export template applied to a border device advertises all tenant prefixes beyond the data center. Here the scenario is: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary. The controlling principle is “A virtual network's routed gateway and routing-zone association determine its Layer 3 tenant boundary”.

Question 510

A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. Which design or operational principle best explains this behavior?

  1. Blueprint design inheritance and change management must be validated; editing a design object does not prove all deployed fabrics changed.
  2. Blueprint design intent must model necessary fabric roles and external connectivity before deployment.
  3. Design-phase resource and topology validation must succeed before a controlled deployment can be trusted.
  4. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination.

Explanation

Correct Answer

B:

blueprint design intent must model necessary fabric roles and external connectivity before deployment. Here, a proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. A useful discriminating check is to compare required external routing connections with the template topology and leaf roles.

Incorrect Answers

A:

That choice—“Blueprint design inheritance and change management must be validated; editing a design object does not prove all deployed fabrics changed”—addresses this other problem: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. Here the scenario is: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. Blueprint design intent must model necessary fabric roles and external connectivity before deployment. The controlling principle is “Blueprint design intent must model necessary fabric roles and external connectivity before deployment”.

C:

The option “Design-phase resource and topology validation must succeed before a controlled deployment can be trusted” is useful in a different setting: An Apstra designer tries to deploy a rack without allocating required underlay interface and IP pools. The case being tested is: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. Blueprint design intent must model necessary fabric roles and external connectivity before deployment. The controlling principle is “Blueprint design intent must model necessary fabric roles and external connectivity before deployment”.

D:

“Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination” is relevant to a different condition: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. The stated question instead concerns: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. Blueprint design intent must model necessary fabric roles and external connectivity before deployment. The controlling principle is “Blueprint design intent must model necessary fabric roles and external connectivity before deployment”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests