mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 47

Question 460

An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. Which evidence most directly verifies the intended network outcome?

  1. Prove the revised blueprint builds with valid allocations and switches converge on intended active state.
  2. Confirm no required pending work was silently lost and the correct historical revision became active.
  3. Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged.
  4. Confirm active blueprint state matches the intended retained revision and critical services recover.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm active blueprint state matches the intended retained revision and critical services recover. The decisive investigation is to inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices. The governing principle is that Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints.

Incorrect Answers

A:

The option “Prove the revised blueprint builds with valid allocations and switches converge on intended active state” is useful in a different setting: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. The case being tested is: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints. The direct acceptance evidence is “Confirm active blueprint state matches the intended retained revision and critical services recover”.

B:

“Confirm no required pending work was silently lost and the correct historical revision became active” is relevant to a different condition: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. The stated question instead concerns: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints. The direct acceptance evidence is “Confirm active blueprint state matches the intended retained revision and critical services recover”.

C:

That choice—“Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged”—addresses this other problem: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. Here the scenario is: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints. The direct acceptance evidence is “Confirm active blueprint state matches the intended retained revision and critical services recover”.

Question 461

A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Which evidence most directly verifies the intended network outcome?

  1. Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable.
  2. Verify sanctioned intersite application flows and absence of unauthorized tenant route propagation.
  3. Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked.
  4. Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable. The decisive investigation is to compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment. The governing principle is that hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service.

Incorrect Answers

B:

The option “Verify sanctioned intersite application flows and absence of unauthorized tenant route propagation” is useful in a different setting: A data-center interconnect extends selected tenant segments between two sites but one site imports unrelated virtual networks. The case being tested is: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The direct acceptance evidence is “Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable”.

C:

“Verify permitted shared-service traffic works and all other inter-tenant paths remain blocked” is relevant to a different condition: A data center offers centralized DNS across isolated customers while requiring strict east-west access boundaries. The stated question instead concerns: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The direct acceptance evidence is “Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable”.

D:

That choice—“Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated”—addresses this other problem: A development VN is accidentally assigned to the wrong routing zone during a project migration. Here the scenario is: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. Hypervisor network labels and Apstra fabric virtual-network connectivity must both represent the intended tenant service. The direct acceptance evidence is “Confirm migrated VMs communicate over the intended tenant VN while unauthorized networks remain unreachable”.

Question 462

A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Which shortcut would be most likely to undermine this objective?

  1. Force a 100G logical port onto unsupported breakout lanes and rely on autonegotiation to fix the design.
  2. Disable interface conflict checks rather than correcting the physical resource plan.
  3. Copy port names from a different hardware platform without checking physical assignments.
  4. Assume the logical device automatically creates additional physical interfaces on undersized hardware.

Explanation

Correct Answer

C:

This is the unsafe shortcut to avoid: copy port names from a different hardware platform without checking physical assignments. It violates the principle that logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. An appropriate alternative is to apply a supported interface map that binds each logical fabric role to the intended physical port.

Incorrect Answers

A:

That choice—“Force a 100G logical port onto unsupported breakout lanes and rely on autonegotiation to fix the design”—addresses this other problem: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Here the scenario is: A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The directly relevant unsafe shortcut is “Copy port names from a different hardware platform without checking physical assignments”.

B:

“Disable interface conflict checks rather than correcting the physical resource plan” is associated with a distinct issue: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. By contrast, the actual problem is: A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The directly relevant unsafe shortcut is “Copy port names from a different hardware platform without checking physical assignments”.

D:

“Assume the logical device automatically creates additional physical interfaces on undersized hardware” is relevant to a different condition: A rack template chooses a logical device with insufficient server ports for its planned generic systems. The stated question instead concerns: A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The directly relevant unsafe shortcut is “Copy port names from a different hardware platform without checking physical assignments”.

Question 463

A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. Which controlled change best addresses the described requirement?

  1. Restore the supported device-agent connection and management credentials without bypassing security checks.
  2. Use the documented recovery and reconciliation procedure before attempting broad deployment changes.
  3. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.
  4. Select a supported device and image combination and complete controlled onboarding checks.

Explanation

Correct Answer

D:

This action addresses the stated defect: select a supported device and image combination and complete controlled onboarding checks. The underlying constraint is that supported device integration requires compatible platform profiles, agents and operating-system capabilities for intended automation. Verify rather than assume success: prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint.

Incorrect Answers

A:

“Restore the supported device-agent connection and management credentials without bypassing security checks” is relevant to a different condition: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. The stated question instead concerns: A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. The governing requirement is to Select a supported device and image combination and complete controlled onboarding checks. The most relevant correction is “Select a supported device and image combination and complete controlled onboarding checks”.

B:

That choice—“Use the documented recovery and reconciliation procedure before attempting broad deployment changes”—addresses this other problem: A Juniper Apstra controller is restored following a failure and some device configurations no longer match its database. Here the scenario is: A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. The governing requirement is to Select a supported device and image combination and complete controlled onboarding checks. The most relevant correction is “Select a supported device and image combination and complete controlled onboarding checks”.

C:

“Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits” is associated with a distinct issue: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. By contrast, the actual problem is: A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. The governing requirement is to Select a supported device and image combination and complete controlled onboarding checks. The most relevant correction is “Select a supported device and image combination and complete controlled onboarding checks”.

Question 464

A new blueprint shows red validation errors before any managed device has received configuration. Which controlled change best addresses the described requirement?

  1. Resolve the specific design and resource conflicts and regenerate intended configuration.
  2. Choose an officially supported template and platform combination and regenerate the blueprint configuration.
  3. Stage and review each intended blueprint update through an approved migration or change process.
  4. Extend the approved blueprint design to include appropriate border connectivity and associated resources.

Explanation

Correct Answer

A:

This action addresses the stated defect: resolve the specific design and resource conflicts and regenerate intended configuration. The underlying constraint is that design-phase resource and topology validation must succeed before a controlled deployment can be trusted. Verify rather than assume success: confirm the blueprint build validation clears and expected rendered configurations are available for review.

Incorrect Answers

B:

“Choose an officially supported template and platform combination and regenerate the blueprint configuration” is relevant to a different condition: A blueprint uses a template intended for a different network OS and generated configuration contains unsupported syntax. The stated question instead concerns: A new blueprint shows red validation errors before any managed device has received configuration. Resolve the specific design and resource conflicts and regenerate intended configuration. The most relevant correction is “Resolve the specific design and resource conflicts and regenerate intended configuration”.

C:

That choice—“Stage and review each intended blueprint update through an approved migration or change process”—addresses this other problem: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. Here the scenario is: A new blueprint shows red validation errors before any managed device has received configuration. Resolve the specific design and resource conflicts and regenerate intended configuration. The most relevant correction is “Resolve the specific design and resource conflicts and regenerate intended configuration”.

D:

“Extend the approved blueprint design to include appropriate border connectivity and associated resources” is associated with a distinct issue: An engineer finishes a fabric template without any modeled north-south peering attachment points. By contrast, the actual problem is: A new blueprint shows red validation errors before any managed device has received configuration. Resolve the specific design and resource conflicts and regenerate intended configuration. The most relevant correction is “Resolve the specific design and resource conflicts and regenerate intended configuration”.

Question 465

A rack designer wants a redundant host attachment pattern for critical appliances. Which controlled change best addresses the described requirement?

  1. Correct the cable plan to use approved physically independent spine paths.
  2. Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate.
  3. Create or select the approved reusable rack type and instantiate the rack consistently.
  4. Expand spine capacity or rescope rack additions under a supported topology design.

Explanation

Correct Answer

B:

This action addresses the stated defect: select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The underlying constraint is that rack type and leaf selection must support the intended redundant attachment topology and host interface roles. Verify rather than assume success: demonstrate both host attachments map to intended leafs and a single leaf loss meets recovery objectives.

Incorrect Answers

A:

“Correct the cable plan to use approved physically independent spine paths” is associated with a distinct issue: A data center cabling plan repeats one spine endpoint for all redundant paths from a critical rack. By contrast, the actual problem is: A rack designer wants a redundant host attachment pattern for critical appliances. The governing requirement is to Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The most relevant correction is “Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate”.

C:

“Create or select the approved reusable rack type and instantiate the rack consistently” is relevant to a different condition: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. The stated question instead concerns: A rack designer wants a redundant host attachment pattern for critical appliances. The governing requirement is to Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The most relevant correction is “Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate”.

D:

That choice—“Expand spine capacity or rescope rack additions under a supported topology design”—addresses this other problem: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. Here the scenario is: A rack designer wants a redundant host attachment pattern for critical appliances. The governing requirement is to Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The most relevant correction is “Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate”.

Question 466

An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. Which initial check would most directly distinguish the likely cause?

  1. Compare dashboard health with active revision and pending staged configuration diffs.
  2. Inspect the Uncommitted diff and attribution for every pending blueprint change.
  3. Compare pristine baseline, incremental changes and final rendered config against the active blueprint.
  4. Compare staged differences with active configuration and deployment status before testing production traffic.

Explanation

Correct Answer

D:

This checks the relevant evidence first: compare staged differences with active configuration and deployment status before testing production traffic. The underlying concept is that staged blueprint intent can differ from the deployed active revision until approved changes are committed. After confirming the finding, a controlled remediation is to complete review and commit of the authorized staged change, then monitor device convergence.

Incorrect Answers

A:

That choice—“Compare dashboard health with active revision and pending staged configuration diffs”—addresses this other problem: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. Here the scenario is: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. The relevant inspection is: Compare staged differences with active configuration and deployment status before testing production traffic. The most discriminating first check is “Compare staged differences with active configuration and deployment status before testing production traffic”.

B:

“Inspect the Uncommitted diff and attribution for every pending blueprint change” is associated with a distinct issue: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. By contrast, the actual problem is: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. The relevant inspection is: Compare staged differences with active configuration and deployment status before testing production traffic. The most discriminating first check is “Compare staged differences with active configuration and deployment status before testing production traffic”.

C:

The option “Compare pristine baseline, incremental changes and final rendered config against the active blueprint” is useful in a different setting: A network engineer sees differences among the pristine, incremental and rendered configurations for a managed leaf. The case being tested is: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. The relevant inspection is: Compare staged differences with active configuration and deployment status before testing production traffic. The most discriminating first check is “Compare staged differences with active configuration and deployment status before testing production traffic”.

Question 467

A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Which shortcut would be most likely to undermine this objective?

  1. Force an unsupported image into production and trust that agent discovery alone guarantees compatibility.
  2. Share a full-administrator account with all engineers to avoid configuring granular roles.
  3. Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient.
  4. Assume an old green device status proves the agent is still collecting current data.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: share a full-administrator account with all engineers to avoid configuring granular roles. It violates the principle that Apstra role-based access control separates read visibility from permissions to change managed fabric objects. An appropriate alternative is to grant the minimum documented blueprint role permissions through the approved access-review process.

Incorrect Answers

A:

“Force an unsupported image into production and trust that agent discovery alone guarantees compatibility” is relevant to a different condition: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. The stated question instead concerns: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The directly relevant unsafe shortcut is “Share a full-administrator account with all engineers to avoid configuring granular roles”.

C:

“Make device CLI changes outside Apstra because overlapping blueprint edits are inconvenient” is associated with a distinct issue: A site adds a second blueprint operator but needs to ensure simultaneous edits do not bypass change ownership. By contrast, the actual problem is: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The directly relevant unsafe shortcut is “Share a full-administrator account with all engineers to avoid configuring granular roles”.

D:

The option “Assume an old green device status proves the agent is still collecting current data” is useful in a different setting: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. The case being tested is: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The directly relevant unsafe shortcut is “Share a full-administrator account with all engineers to avoid configuring granular roles”.

Question 468

A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. Which initial check would most directly distinguish the likely cause?

  1. Review intended external service connectivity and supported blueprint reference-design capabilities.
  2. Compare the proposed topology with supported reference-design dimensions and template requirements.
  3. Calculate required leaf uplinks and available spine ports for projected growth under the topology template.
  4. Compare required external routing connections with the template topology and leaf roles.

Explanation

Correct Answer

A:

This checks the relevant evidence first: review intended external service connectivity and supported blueprint reference-design capabilities. The underlying concept is that reference-design selection should reflect external routing, redundancy, rack scale and supported platform requirements. After confirming the finding, a controlled remediation is to choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints.

Incorrect Answers

B:

“Compare the proposed topology with supported reference-design dimensions and template requirements” is relevant to a different condition: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. The stated question instead concerns: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. The relevant inspection is: Review intended external service connectivity and supported blueprint reference-design capabilities. The most discriminating first check is “Review intended external service connectivity and supported blueprint reference-design capabilities”.

C:

That choice—“Calculate required leaf uplinks and available spine ports for projected growth under the topology template”—addresses this other problem: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Here the scenario is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. The relevant inspection is: Review intended external service connectivity and supported blueprint reference-design capabilities. The most discriminating first check is “Review intended external service connectivity and supported blueprint reference-design capabilities”.

D:

“Compare required external routing connections with the template topology and leaf roles” is associated with a distinct issue: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. By contrast, the actual problem is: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. The relevant inspection is: Review intended external service connectivity and supported blueprint reference-design capabilities. The most discriminating first check is “Review intended external service connectivity and supported blueprint reference-design capabilities”.

Question 469

A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. Which evidence most directly verifies the intended network outcome?

  1. Demonstrate aggregate load sharing across many five-tuple flows while a single flow remains stable on one path.
  2. Confirm remote VTEP loopbacks resolve to healthy fabric routes and VXLAN tunnel traffic succeeds.
  3. Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective.
  4. Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks.

Explanation

Correct Answer

C:

This directly tests the desired result: prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective. The decisive investigation is to check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The governing principle is that path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly.

Incorrect Answers

A:

“Demonstrate aggregate load sharing across many five-tuple flows while a single flow remains stable on one path” is associated with a distinct issue: A customer asks why adding a second spine path does not necessarily double the rate of one elephant-flow TCP session. By contrast, the actual problem is: A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The direct acceptance evidence is “Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective”.

B:

The option “Confirm remote VTEP loopbacks resolve to healthy fabric routes and VXLAN tunnel traffic succeeds” is useful in a different setting: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. The case being tested is: A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The direct acceptance evidence is “Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective”.

D:

That choice—“Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks”—addresses this other problem: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. Here the scenario is: A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The direct acceptance evidence is “Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective”.

Question 470

A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. Which controlled change best addresses the described requirement?

  1. Separate, revert or review unrelated staged edits before an authorized commit according to process.
  2. Complete review and commit of the authorized staged change, then monitor device convergence.
  3. Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review.
  4. Revert the specific uncommitted edit rather than rolling back an unrelated committed revision.

Explanation

Correct Answer

A:

This action addresses the stated defect: separate, revert or review unrelated staged edits before an authorized commit according to process. The underlying constraint is that the set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications. Verify rather than assume success: confirm the resulting active revision contains only approved changes and has a traceable description.

Incorrect Answers

B:

“Complete review and commit of the authorized staged change, then monitor device convergence” is associated with a distinct issue: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. By contrast, the actual problem is: A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. Separate, revert or review unrelated staged edits before an authorized commit according to process. The most relevant correction is “Separate, revert or review unrelated staged edits before an authorized commit according to process”.

C:

The option “Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review” is useful in a different setting: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. The case being tested is: A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. Separate, revert or review unrelated staged edits before an authorized commit according to process. The most relevant correction is “Separate, revert or review unrelated staged edits before an authorized commit according to process”.

D:

“Revert the specific uncommitted edit rather than rolling back an unrelated committed revision” is relevant to a different condition: A designer notices an accidental rack parameter change before any blueprint commit has occurred. The stated question instead concerns: A blueprint has accumulated unrelated uncommitted routing and rack modifications from different change windows. Separate, revert or review unrelated staged edits before an authorized commit according to process. The most relevant correction is “Separate, revert or review unrelated staged edits before an authorized commit according to process”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests