mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 36

Question 350

An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. Which controlled change best addresses the described requirement?

  1. Repair EVPN endpoint advertisement and import eligibility for the affected virtual network.
  2. Correct the intended route target mapping and import policies while preserving tenant isolation.
  3. Correct prefix export/import and next-hop resolution for the routed EVPN IP prefix.
  4. Align approved Ethernet segment and multihoming configuration on the participating leaf devices.

Explanation

Correct Answer

D:

This action addresses the stated defect: align approved Ethernet segment and multihoming configuration on the participating leaf devices. The underlying constraint is that EVPN Ethernet segment identification and designated-forwarder behavior coordinate multihomed Ethernet reachability. Verify rather than assume success: confirm stable multihoming advertisements and appropriate forwarding when each server attachment is tested.

Incorrect Answers

A:

That choice—“Repair EVPN endpoint advertisement and import eligibility for the affected virtual network”—addresses this other problem: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. Here the scenario is: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. Align approved Ethernet segment and multihoming configuration on the participating leaf devices. The most relevant correction is “Align approved Ethernet segment and multihoming configuration on the participating leaf devices”.

B:

“Correct the intended route target mapping and import policies while preserving tenant isolation” is associated with a distinct issue: Two leaves advertise the same virtual network yet one leaf rejects the other's EVPN MAC routes. By contrast, the actual problem is: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. Align approved Ethernet segment and multihoming configuration on the participating leaf devices. The most relevant correction is “Align approved Ethernet segment and multihoming configuration on the participating leaf devices”.

C:

The option “Correct prefix export/import and next-hop resolution for the routed EVPN IP prefix” is useful in a different setting: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. The case being tested is: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. Align approved Ethernet segment and multihoming configuration on the participating leaf devices. The most relevant correction is “Align approved Ethernet segment and multihoming configuration on the participating leaf devices”.

Question 351

A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. Which controlled change best addresses the described requirement?

  1. Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration.
  2. Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state.
  3. Configure sufficient supported underlay MTU along the fabric path or safely adjust payload MTU.
  4. Use the supported EVPN control plane and verify route import for the intended virtual network.

Explanation

Correct Answer

A:

This action addresses the stated defect: restore the authorized VLAN and VNI association and commit the correct virtual-network configuration. The underlying constraint is that the VNI associates overlay VXLAN traffic with the intended virtual network, so inconsistent VLAN-to-VNI mapping breaks isolation or connectivity. Verify rather than assume success: verify same-tenant endpoints communicate and traffic is not delivered to the unrelated tenant VNI.

Incorrect Answers

B:

That choice—“Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state”—addresses this other problem: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. Here the scenario is: A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration. The most relevant correction is “Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration”.

C:

“Configure sufficient supported underlay MTU along the fabric path or safely adjust payload MTU” is associated with a distinct issue: An east-west application works without tunneling but drops large payloads after VXLAN overlay migration. By contrast, the actual problem is: A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration. The most relevant correction is “Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration”.

D:

The option “Use the supported EVPN control plane and verify route import for the intended virtual network” is useful in a different setting: An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. The case being tested is: A server's VLAN 210 is accidentally bound to the wrong VXLAN segment on one leaf. Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration. The most relevant correction is “Restore the authorized VLAN and VNI association and commit the correct virtual-network configuration”.

Question 352

A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Which evidence most directly verifies the intended network outcome?

  1. Validate that physical port assignments and supported speeds match the rack design without resource conflicts.
  2. Confirm rendered port assignments match the physical cable map and supported switch interfaces.
  3. Confirm the design validator has no duplicate port assignments and each link role maps to the intended connector.
  4. Confirm each active virtual network has the intended unique or explicitly shared VNI mapping.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm rendered port assignments match the physical cable map and supported switch interfaces. The decisive investigation is to review logical-to-physical interface mappings and device profile nomenclature for the new platform. The governing principle is that logical device interfaces must be mapped to actual supported physical device ports through the correct interface map.

Incorrect Answers

A:

The option “Validate that physical port assignments and supported speeds match the rack design without resource conflicts” is useful in a different setting: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. The case being tested is: A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The direct acceptance evidence is “Confirm rendered port assignments match the physical cable map and supported switch interfaces”.

C:

That choice—“Confirm the design validator has no duplicate port assignments and each link role maps to the intended connector”—addresses this other problem: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. Here the scenario is: A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The direct acceptance evidence is “Confirm rendered port assignments match the physical cable map and supported switch interfaces”.

D:

“Confirm each active virtual network has the intended unique or explicitly shared VNI mapping” is associated with a distinct issue: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. By contrast, the actual problem is: A data center expansion reuses a logical device definition on a switch with a distinct interface numbering scheme. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map. The direct acceptance evidence is “Confirm rendered port assignments match the physical cable map and supported switch interfaces”.

Question 353

A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Which design or operational principle best explains this behavior?

  1. Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map.
  2. Interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity.
  3. A physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint.
  4. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces.

Explanation

Correct Answer

B:

interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity. Here, a rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. A useful discriminating check is to compare the selected hardware profile, breakout mode and logical interface requirements before deploying.

Incorrect Answers

A:

“Logical device interfaces must be mapped to actual supported physical device ports through the correct interface map” is associated with a distinct issue: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. By contrast, the actual problem is: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity. The controlling principle is “Interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity”.

C:

“A physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint” is relevant to a different condition: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. The stated question instead concerns: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity. The controlling principle is “Interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity”.

D:

That choice—“Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces”—addresses this other problem: A site plans to double leaf count next year while reserving no interface or port-speed headroom. Here the scenario is: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. Interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity. The controlling principle is “Interface maps and device profiles define which supported physical ports and speeds satisfy logical device connectivity”.

Question 354

A team needs to identify whether a failed deployment arose from system automation or an approved human change. Which evidence most directly verifies the intended network outcome?

  1. Confirm logs identify the affected blueprint revision, device and operator or automation identity.
  2. Produce a traceable operator or automation event associated with the observed revision and change window.
  3. Confirm timestamped Apstra events arrive at the collector and retain source attribution.
  4. Verify current samples arrive and synthetic test conditions create expected alarms.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm logs identify the affected blueprint revision, device and operator or automation identity. The decisive investigation is to review the event timeline, blueprint commit notes, deployment status and actor records. The governing principle is that controller event logs and deployment records should be correlated with intent revisions and change approvals.

Incorrect Answers

B:

“Produce a traceable operator or automation event associated with the observed revision and change window” is associated with a distinct issue: A team investigates whether a blueprint revision was created by automation or by an administrator. By contrast, the actual problem is: A team needs to identify whether a failed deployment arose from system automation or an approved human change. Controller event logs and deployment records should be correlated with intent revisions and change approvals. The direct acceptance evidence is “Confirm logs identify the affected blueprint revision, device and operator or automation identity”.

C:

The option “Confirm timestamped Apstra events arrive at the collector and retain source attribution” is useful in a different setting: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. The case being tested is: A team needs to identify whether a failed deployment arose from system automation or an approved human change. Controller event logs and deployment records should be correlated with intent revisions and change approvals. The direct acceptance evidence is “Confirm logs identify the affected blueprint revision, device and operator or automation identity”.

D:

“Verify current samples arrive and synthetic test conditions create expected alarms” is relevant to a different condition: An Apstra operator sees no current alerts after a telemetry collector became unreachable. The stated question instead concerns: A team needs to identify whether a failed deployment arose from system automation or an approved human change. Controller event logs and deployment records should be correlated with intent revisions and change approvals. The direct acceptance evidence is “Confirm logs identify the affected blueprint revision, device and operator or automation identity”.

Question 355

A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Which evidence most directly verifies the intended network outcome?

  1. Demonstrate aggregate load sharing across many five-tuple flows while a single flow remains stable on one path.
  2. Confirm remote VTEP loopbacks resolve to healthy fabric routes and VXLAN tunnel traffic succeeds.
  3. Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks.
  4. Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective.

Explanation

Correct Answer

D:

This directly tests the desired result: prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective. The decisive investigation is to check interface state, routing convergence and forwarding entries following the simulated spine-link loss. The governing principle is that path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly.

Incorrect Answers

A:

“Demonstrate aggregate load sharing across many five-tuple flows while a single flow remains stable on one path” is relevant to a different condition: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. The stated question instead concerns: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The direct acceptance evidence is “Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective”.

B:

That choice—“Confirm remote VTEP loopbacks resolve to healthy fabric routes and VXLAN tunnel traffic succeeds”—addresses this other problem: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. Here the scenario is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The direct acceptance evidence is “Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective”.

C:

“Observe established underlay peers and reachability of every intended VTEP loopback before testing virtual networks” is associated with a distinct issue: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. By contrast, the actual problem is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The direct acceptance evidence is “Prove traffic moves to remaining healthy ECMP next hops within the accepted convergence objective”.

Question 356

A rack template chooses a logical device with insufficient server ports for its planned generic systems. Which initial check would most directly distinguish the likely cause?

  1. Inspect pool size, consumed allocations and required identifiers for all logical devices.
  2. Compare the selected logical device's interface count, speeds and connection roles with rack requirements.
  3. Inspect object tags and query results before selecting the intended device set.
  4. Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings.

Explanation

Correct Answer

B:

This checks the relevant evidence first: compare the selected logical device's interface count, speeds and connection roles with rack requirements. The underlying concept is that logical device definitions represent required interface roles and capacities, independent of hardware SKU details. After confirming the finding, a controlled remediation is to use a compatible logical device and device profile combination with sufficient supported host ports.

Incorrect Answers

A:

The option “Inspect pool size, consumed allocations and required identifiers for all logical devices” is useful in a different setting: A new blueprint assigns every VTEP from a resource pool that is too small for the proposed rack count. The case being tested is: A rack template chooses a logical device with insufficient server ports for its planned generic systems. The relevant inspection is: Compare the selected logical device's interface count, speeds and connection roles with rack requirements. The most discriminating first check is “Compare the selected logical device's interface count, speeds and connection roles with rack requirements”.

C:

That choice—“Inspect object tags and query results before selecting the intended device set”—addresses this other problem: A team needs to group rack devices for maintenance based on operational ownership without renaming every node. Here the scenario is: A rack template chooses a logical device with insufficient server ports for its planned generic systems. The relevant inspection is: Compare the selected logical device's interface count, speeds and connection roles with rack requirements. The most discriminating first check is “Compare the selected logical device's interface count, speeds and connection roles with rack requirements”.

D:

“Check the VNI resource pool, existing reservations and intended tenant-to-VN mappings” is associated with a distinct issue: An expansion accidentally reuses a virtual network identifier assigned to another isolated overlay segment. By contrast, the actual problem is: A rack template chooses a logical device with insufficient server ports for its planned generic systems. The relevant inspection is: Compare the selected logical device's interface count, speeds and connection roles with rack requirements. The most discriminating first check is “Compare the selected logical device's interface count, speeds and connection roles with rack requirements”.

Question 357

A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Which evidence most directly verifies the intended network outcome?

  1. Confirm intended and running configurations are consistent and the fabric's critical paths remain operational.
  2. Confirm the server receives fresh device state and reconciles inventory and blueprint expectations.
  3. Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint.
  4. Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied. The decisive investigation is to inspect the user's role assignments and denied operation in the Apstra access and audit records. The governing principle is that Apstra role-based access control separates read visibility from permissions to change managed fabric objects.

Incorrect Answers

A:

“Confirm intended and running configurations are consistent and the fabric's critical paths remain operational” is associated with a distinct issue: An operations team recovers a backup of the controller taken before the most recent fabric changes. By contrast, the actual problem is: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The direct acceptance evidence is “Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied”.

B:

The option “Confirm the server receives fresh device state and reconciles inventory and blueprint expectations” is useful in a different setting: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. The case being tested is: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The direct acceptance evidence is “Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied”.

C:

“Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint” is relevant to a different condition: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. The stated question instead concerns: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. Apstra role-based access control separates read visibility from permissions to change managed fabric objects. The direct acceptance evidence is “Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied”.

Question 358

A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. Which evidence most directly verifies the intended network outcome?

  1. Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network.
  2. Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic.
  3. Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF.
  4. Observe each VRF learns only the intended tenant routes despite overlapping address space.

Explanation

Correct Answer

A:

This directly tests the desired result: observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network. The decisive investigation is to inspect per-VRF and per-virtual-network route target communities and import/export decisions. The governing principle is that matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability.

Incorrect Answers

B:

“Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic” is associated with a distinct issue: A leaf needs to advertise a workload endpoint location to remote EVPN participants across the VXLAN fabric. By contrast, the actual problem is: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The direct acceptance evidence is “Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network”.

C:

The option “Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF” is useful in a different setting: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. The case being tested is: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The direct acceptance evidence is “Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network”.

D:

“Observe each VRF learns only the intended tenant routes despite overlapping address space” is relevant to a different condition: A provider deploys two isolated VRFs containing identical IP prefixes in distinct tenant spaces. The stated question instead concerns: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. Matching import and export policy for the intended virtual network governs whether EVPN route distribution creates usable reachability. The direct acceptance evidence is “Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network”.

Question 359

An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Which controlled change best addresses the described requirement?

  1. Repair the verified common uplink fault and retain alert history for root-cause analysis.
  2. Correlate the observed metrics with topology and tune or remediate the validated underlying condition.
  3. Restore justified monitoring sensitivity and remediate the measured issue instead of hiding it.
  4. Narrow the query and probe stages to the correct blueprint nodes and monitored metrics.

Explanation

Correct Answer

B:

This action addresses the stated defect: correlate the observed metrics with topology and tune or remediate the validated underlying condition. The underlying constraint is that analytics anomalies can indicate measured performance deviations that do not coincide with configuration intent mismatches. Verify rather than assume success: confirm latency measurements and anomaly state return within accepted bounds under representative traffic.

Incorrect Answers

A:

“Repair the verified common uplink fault and retain alert history for root-cause analysis” is relevant to a different condition: An operations team receives repeated probe-stage alerts after an optic begins incrementing errors. The stated question instead concerns: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Correlate the observed metrics with topology and tune or remediate the validated underlying condition. The most relevant correction is “Correlate the observed metrics with topology and tune or remediate the validated underlying condition”.

C:

“Restore justified monitoring sensitivity and remediate the measured issue instead of hiding it” is associated with a distinct issue: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. By contrast, the actual problem is: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Correlate the observed metrics with topology and tune or remediate the validated underlying condition. The most relevant correction is “Correlate the observed metrics with topology and tune or remediate the validated underlying condition”.

D:

The option “Narrow the query and probe stages to the correct blueprint nodes and monitored metrics” is useful in a different setting: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. The case being tested is: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Correlate the observed metrics with topology and tune or remediate the validated underlying condition. The most relevant correction is “Correlate the observed metrics with topology and tune or remediate the validated underlying condition”.

Question 360

A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Which design or operational principle best explains this behavior?

  1. Device health, intended active blueprint state and pending staged edits describe different dimensions of operations.
  2. The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications.
  3. Staged blueprint intent can differ from the deployed active revision until approved changes are committed.
  4. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners.

Explanation

Correct Answer

C:

staged blueprint intent can differ from the deployed active revision until approved changes are committed. Here, a service owner tests a new VRF assignment while the proposed change appears only in the Staged view. A useful discriminating check is to compare staged differences with active configuration and deployment status before testing production traffic.

Incorrect Answers

A:

The option “Device health, intended active blueprint state and pending staged edits describe different dimensions of operations” is useful in a different setting: A dashboard reports that all switches are reachable while a recent staged policy change has not been deployed. The case being tested is: A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Staged blueprint intent can differ from the deployed active revision until approved changes are committed. The controlling principle is “Staged blueprint intent can differ from the deployed active revision until approved changes are committed”.

B:

“The set of uncommitted changes must be reviewed as a whole before deployment because committing may include multiple intended modifications” is relevant to a different condition: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. The stated question instead concerns: A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Staged blueprint intent can differ from the deployed active revision until approved changes are committed. The controlling principle is “Staged blueprint intent can differ from the deployed active revision until approved changes are committed”.

D:

“A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners” is associated with a distinct issue: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. By contrast, the actual problem is: A service owner tests a new VRF assignment while the proposed change appears only in the Staged view. Staged blueprint intent can differ from the deployed active revision until approved changes are committed. The controlling principle is “Staged blueprint intent can differ from the deployed active revision until approved changes are committed”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests