mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 30

Question 290

A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. Which controlled change best addresses the described requirement?

  1. Install or repair the supported agent and associate the correct device identity through approved onboarding.
  2. Assign the replacement supported system to the correct logical role using the documented controlled process.
  3. Correct the duplicate device registration and assign each real device its own validated identity.
  4. Review and commit the approved staged change using the documented deployment process.

Explanation

Correct Answer

A:

This action addresses the stated defect: install or repair the supported agent and associate the correct device identity through approved onboarding. The underlying constraint is that Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity. Verify rather than assume success: confirm the device appears healthy, available and uniquely identified for blueprint assignment.

Incorrect Answers

B:

“Assign the replacement supported system to the correct logical role using the documented controlled process” is associated with a distinct issue: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. By contrast, the actual problem is: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. Install or repair the supported agent and associate the correct device identity through approved onboarding. The most relevant correction is “Install or repair the supported agent and associate the correct device identity through approved onboarding”.

C:

The option “Correct the duplicate device registration and assign each real device its own validated identity” is useful in a different setting: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. The case being tested is: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. Install or repair the supported agent and associate the correct device identity through approved onboarding. The most relevant correction is “Install or repair the supported agent and associate the correct device identity through approved onboarding”.

D:

“Review and commit the approved staged change using the documented deployment process” is relevant to a different condition: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. The stated question instead concerns: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. Install or repair the supported agent and associate the correct device identity through approved onboarding. The most relevant correction is “Install or repair the supported agent and associate the correct device identity through approved onboarding”.

Question 291

A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. Which shortcut would be most likely to undermine this objective?

  1. Assume a unique VLAN number alone guarantees Layer 3 tenant isolation.
  2. Place all tenants in the default VRF because the subnets appear familiar.
  3. Configure every virtual network as a tagged VLAN on the server trunk for convenience.
  4. Create an unrelated VRF for each VLAN without validating the tenant's routing requirements.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: create an unrelated VRF for each VLAN without validating the tenant's routing requirements. It violates the principle that a routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. An appropriate alternative is to assign each intended VN to the correct routing zone while preserving appropriate bridging and routing boundaries.

Incorrect Answers

A:

“Assume a unique VLAN number alone guarantees Layer 3 tenant isolation” is relevant to a different condition: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. The stated question instead concerns: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The directly relevant unsafe shortcut is “Create an unrelated VRF for each VLAN without validating the tenant's routing requirements”.

B:

That choice—“Place all tenants in the default VRF because the subnets appear familiar”—addresses this other problem: A provider wants separate customer routing domains that can reuse 10.10.0.0/16 without ambiguity. Here the scenario is: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The directly relevant unsafe shortcut is “Create an unrelated VRF for each VLAN without validating the tenant's routing requirements”.

C:

“Configure every virtual network as a tagged VLAN on the server trunk for convenience” is associated with a distinct issue: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. By contrast, the actual problem is: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The directly relevant unsafe shortcut is “Create an unrelated VRF for each VLAN without validating the tenant's routing requirements”.

Question 292

A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Which controlled change best addresses the described requirement?

  1. Create or correct a scoped connectivity template and routing policy for the authorized VRF.
  2. Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment.
  3. Bind only authorized tagged and untagged VN attachments to the selected generic-system port.
  4. Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes.

Explanation

Correct Answer

A:

This action addresses the stated defect: create or correct a scoped connectivity template and routing policy for the authorized VRF. The underlying constraint is that connectivity templates can describe supported external routing sessions and attach them to the intended routing zone. Verify rather than assume success: verify the intended external session and imported/exported prefixes appear only in the proper tenant routing context.

Incorrect Answers

B:

“Constrain the external peering policy to explicitly permitted prefixes and verify intended attachment” is relevant to a different condition: A route export template applied to a border device advertises all tenant prefixes beyond the data center. The stated question instead concerns: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Create or correct a scoped connectivity template and routing policy for the authorized VRF. The most relevant correction is “Create or correct a scoped connectivity template and routing policy for the authorized VRF”.

C:

That choice—“Bind only authorized tagged and untagged VN attachments to the selected generic-system port”—addresses this other problem: A hypervisor's trunk must carry two allowed application VLANs while leaving unrelated tenant segments inaccessible. Here the scenario is: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Create or correct a scoped connectivity template and routing policy for the authorized VRF. The most relevant correction is “Create or correct a scoped connectivity template and routing policy for the authorized VRF”.

D:

“Create a controlled service insertion or external routing policy permitting only approved shared-service prefixes” is associated with a distinct issue: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. By contrast, the actual problem is: A routed external firewall must exchange routes with a border leaf for only one tenant VRF. Create or correct a scoped connectivity template and routing policy for the authorized VRF. The most relevant correction is “Create or correct a scoped connectivity template and routing policy for the authorized VRF”.

Question 293

A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. Which controlled change best addresses the described requirement?

  1. Document the causal change and correct the failed deployment through an auditable workflow.
  2. Preserve audit records and review the specific committed change before a controlled correction.
  3. Restore data collection and mark stale measurements as unknown rather than healthy.
  4. Configure a supported protected syslog destination with the required log categories and retention policy.

Explanation

Correct Answer

D:

This action addresses the stated defect: configure a supported protected syslog destination with the required log categories and retention policy. The underlying constraint is that syslog forwarding can export relevant controller and device operational events for independent correlation and retention. Verify rather than assume success: confirm timestamped Apstra events arrive at the collector and retain source attribution.

Incorrect Answers

A:

“Document the causal change and correct the failed deployment through an auditable workflow” is associated with a distinct issue: A team needs to identify whether a failed deployment arose from system automation or an approved human change. By contrast, the actual problem is: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. The governing requirement is to Configure a supported protected syslog destination with the required log categories and retention policy. The most relevant correction is “Configure a supported protected syslog destination with the required log categories and retention policy”.

B:

The option “Preserve audit records and review the specific committed change before a controlled correction” is useful in a different setting: A team investigates whether a blueprint revision was created by automation or by an administrator. The case being tested is: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. The governing requirement is to Configure a supported protected syslog destination with the required log categories and retention policy. The most relevant correction is “Configure a supported protected syslog destination with the required log categories and retention policy”.

C:

“Restore data collection and mark stale measurements as unknown rather than healthy” is relevant to a different condition: A monitoring dashboard shows a device as green but telemetry timestamps stopped updating 20 minutes earlier. The stated question instead concerns: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. The governing requirement is to Configure a supported protected syslog destination with the required log categories and retention policy. The most relevant correction is “Configure a supported protected syslog destination with the required log categories and retention policy”.

Question 294

A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. Which evidence most directly verifies the intended network outcome?

  1. Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated.
  2. Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF.
  3. Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs.
  4. Verify the intended external session and imported/exported prefixes appear only in the proper tenant routing context.

Explanation

Correct Answer

B:

This directly tests the desired result: confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF. The decisive investigation is to inspect virtual-network membership and routing-zone assignments for the application segments. The governing principle is that a routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context.

Incorrect Answers

A:

That choice—“Confirm the application subnet uses the expected tenant VRF and other tenants remain isolated”—addresses this other problem: A newly created virtual network must be attached to a tenant VRF, but application packets route through the default routing instance. Here the scenario is: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The direct acceptance evidence is “Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF”.

C:

The option “Confirm each tenant uses its own routing table and no unapproved inter-tenant connectivity occurs” is useful in a different setting: Two tenants require identical subnet ranges in a shared physical fabric while remaining isolated. The case being tested is: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The direct acceptance evidence is “Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF”.

D:

“Verify the intended external session and imported/exported prefixes appear only in the proper tenant routing context” is relevant to a different condition: A tenant needs a dedicated external BGP peering connection without advertising every other tenant's prefixes. The stated question instead concerns: A multirack tenant needs two segmented application subnets while sharing a common VRF routing domain. A routing zone can contain multiple virtual networks that share the intended tenant Layer 3 routing context. The direct acceptance evidence is “Confirm both VN endpoints are isolated at Layer 2 but routed according to tenant policy within the VRF”.

Question 295

An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. Which controlled change best addresses the described requirement?

  1. Correct replication or multicast membership and virtual-network attachment within the supported fabric design.
  2. Configure sufficient supported underlay MTU along the fabric path or safely adjust payload MTU.
  3. Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state.
  4. Use the supported EVPN control plane and verify route import for the intended virtual network.

Explanation

Correct Answer

D:

This action addresses the stated defect: use the supported EVPN control plane and verify route import for the intended virtual network. The underlying constraint is that EVPN uses a control-plane route exchange to distribute endpoint reachability while VXLAN carries encapsulated data. Verify rather than assume success: observe valid endpoint advertisements with less dependence on unknown-destination flooding for known endpoints.

Incorrect Answers

A:

“Correct replication or multicast membership and virtual-network attachment within the supported fabric design” is relevant to a different condition: An overlay virtual network has the correct VNI but unknown destination traffic continues to flood farther than intended. The stated question instead concerns: An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. The governing requirement is to use the supported EVPN control plane and verify route import for the intended virtual network. The most relevant correction is “Use the supported EVPN control plane and verify route import for the intended virtual network”.

B:

That choice—“Configure sufficient supported underlay MTU along the fabric path or safely adjust payload MTU”—addresses this other problem: A VXLAN packet encapsulation crosses a routed fabric but is discarded along the path due to frame size. Here the scenario is: An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. The governing requirement is to use the supported EVPN control plane and verify route import for the intended virtual network. The most relevant correction is “Use the supported EVPN control plane and verify route import for the intended virtual network”.

C:

“Restore routed reachability to the advertised VTEP and the correct tunnel forwarding state” is associated with a distinct issue: A virtualization cluster is moved to another rack and its EVPN routes exist but the remote VXLAN encapsulation next hop fails. By contrast, the actual problem is: An architect compares an EVPN control plane with reliance on data-plane flood-and-learn for VXLAN workloads. The governing requirement is to use the supported EVPN control plane and verify route import for the intended virtual network. The most relevant correction is “Use the supported EVPN control plane and verify route import for the intended virtual network”.

Question 296

A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. Which initial check would most directly distinguish the likely cause?

  1. Inspect rack type properties and compare the proposed rack's connectivity with its validated peers.
  2. Review single-versus-dual leaf rack settings and server connectivity requirements.
  3. Inspect the rack type's expected spine attachment graph and actual cable endpoints.
  4. Review consumed spine port counts, interface maps and oversubscription projections.

Explanation

Correct Answer

B:

This checks the relevant evidence first: review single-versus-dual leaf rack settings and server connectivity requirements. The underlying concept is that rack type and leaf selection must support the intended redundant attachment topology and host interface roles. After confirming the finding, a controlled remediation is to select a supported redundant leaf rack type and document host LAG or independent paths as appropriate.

Incorrect Answers

A:

The option “Inspect rack type properties and compare the proposed rack's connectivity with its validated peers” is useful in a different setting: A new leaf rack should use a repeatable single-leaf topology but its manually modeled connections differ from existing identical racks. The case being tested is: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The relevant inspection is: Review single-versus-dual leaf rack settings and server connectivity requirements. The most discriminating first check is “Review single-versus-dual leaf rack settings and server connectivity requirements”.

C:

That choice—“Inspect the rack type's expected spine attachment graph and actual cable endpoints”—addresses this other problem: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. Here the scenario is: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The relevant inspection is: Review single-versus-dual leaf rack settings and server connectivity requirements. The most discriminating first check is “Review single-versus-dual leaf rack settings and server connectivity requirements”.

D:

“Review consumed spine port counts, interface maps and oversubscription projections” is associated with a distinct issue: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. By contrast, the actual problem is: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The relevant inspection is: Review single-versus-dual leaf rack settings and server connectivity requirements. The most discriminating first check is “Review single-versus-dual leaf rack settings and server connectivity requirements”.

Question 297

An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. Which initial check would most directly distinguish the likely cause?

  1. Inspect the probe stage's graph query, matched entities and input metrics after the migration.
  2. Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric.
  3. Inspect probe data sources, monitored stages, thresholds and the exact interfaces being selected.
  4. Inspect affected probe stages, timestamps and source telemetry along the application path.

Explanation

Correct Answer

B:

This checks the relevant evidence first: inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric. The underlying concept is that IBA stages can enrich and aggregate telemetry before evaluating conditions that constitute an anomaly. After confirming the finding, a controlled remediation is to configure the supported aggregation and alert conditions with documented baseline behavior.

Incorrect Answers

A:

“Inspect the probe stage's graph query, matched entities and input metrics after the migration” is associated with a distinct issue: A built-in analytics probe reports a metric but cannot identify why the value changed after a rack migration. By contrast, the actual problem is: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The relevant inspection is: Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric. The most discriminating first check is “Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric”.

C:

“Inspect probe data sources, monitored stages, thresholds and the exact interfaces being selected” is relevant to a different condition: An operator wants an early-warning signal when fabric interface errors exceed a defined threshold. The stated question instead concerns: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The relevant inspection is: Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric. The most discriminating first check is “Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric”.

D:

That choice—“Inspect affected probe stages, timestamps and source telemetry along the application path”—addresses this other problem: An IBA probe reports intermittent latency spikes but application errors are not visible in basic device health summaries. Here the scenario is: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The relevant inspection is: Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric. The most discriminating first check is “Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric”.

Question 298

An operator sees a tenant-service warning while physical switch availability indicators remain green. Which controlled change best addresses the described requirement?

  1. Investigate the measured condition and adjust the approved monitored system or justified probe threshold.
  2. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation.
  3. Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence.
  4. Complete review and commit of the authorized staged change, then monitor device convergence.

Explanation

Correct Answer

B:

This action addresses the stated defect: correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The underlying constraint is that an Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. Verify rather than assume success: confirm the service anomaly clears and the affected workload network passes functional tests.

Incorrect Answers

A:

That choice—“Investigate the measured condition and adjust the approved monitored system or justified probe threshold”—addresses this other problem: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. Here the scenario is: An operator sees a tenant-service warning while physical switch availability indicators remain green. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The most relevant correction is “Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation”.

C:

The option “Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence” is useful in a different setting: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. The case being tested is: An operator sees a tenant-service warning while physical switch availability indicators remain green. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The most relevant correction is “Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation”.

D:

“Complete review and commit of the authorized staged change, then monitor device convergence” is relevant to a different condition: An engineer edits a virtual network in a blueprint but cannot see the change reflected in the active switch configuration. The stated question instead concerns: An operator sees a tenant-service warning while physical switch availability indicators remain green. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The most relevant correction is “Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation”.

Question 299

An operator wants to identify managed nodes by rack and role in the blueprint graph. Which controlled change best addresses the described requirement?

  1. Apply consistent tags and use targeted graph or blueprint searches to generate the migration inventory.
  2. Separate, revert or review unrelated staged edits before an authorized commit according to process.
  3. Use a scoped blueprint query or tag selector that follows the approved object relationship.
  4. Stage the new rack, assign valid devices and resources, validate, then commit through change control.

Explanation

Correct Answer

C:

This action addresses the stated defect: use a scoped blueprint query or tag selector that follows the approved object relationship. The underlying constraint is that blueprint graph and object queries can select devices using modeled relationships rather than fragile substring matches. Verify rather than assume success: confirm the selection contains exactly the intended leafs and excludes similarly named devices elsewhere.

Incorrect Answers

A:

“Apply consistent tags and use targeted graph or blueprint searches to generate the migration inventory” is relevant to a different condition: A team wants to locate every virtual network owned by a particular application during a migration. The stated question instead concerns: An operator wants to identify managed nodes by rack and role in the blueprint graph. The governing requirement is to use a scoped blueprint query or tag selector that follows the approved object relationship. The most relevant correction is “Use a scoped blueprint query or tag selector that follows the approved object relationship”.

B:

That choice—“Separate, revert or review unrelated staged edits before an authorized commit according to process”—addresses this other problem: Two changes are awaiting commit, and an operator wants to deploy only one without understanding the other outstanding edits. Here the scenario is: An operator wants to identify managed nodes by rack and role in the blueprint graph. The governing requirement is to use a scoped blueprint query or tag selector that follows the approved object relationship. The most relevant correction is “Use a scoped blueprint query or tag selector that follows the approved object relationship”.

D:

The option “Stage the new rack, assign valid devices and resources, validate, then commit through change control” is useful in a different setting: An organization expands a Clos topology and wants newly created racks to inherit validated patterns and allocations. The case being tested is: An operator wants to identify managed nodes by rack and role in the blueprint graph. The governing requirement is to use a scoped blueprint query or tag selector that follows the approved object relationship. The most relevant correction is “Use a scoped blueprint query or tag selector that follows the approved object relationship”.

Question 300

A customer asks why adding a second spine path does not necessarily double the rate of one elephant-flow TCP session. Which controlled change best addresses the described requirement?

  1. Correct underlay failure detection and routing convergence within the approved topology and timer policy.
  2. Use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links.
  3. Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs.
  4. Repair the routed underlay addressing or protocol configuration and then validate overlay sessions.

Explanation

Correct Answer

C:

This action addresses the stated defect: validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs. The underlying constraint is that equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops. Verify rather than assume success: demonstrate aggregate load sharing across many five-tuple flows while a single flow remains stable on one path.

Incorrect Answers

A:

The option “Correct underlay failure detection and routing convergence within the approved topology and timer policy” is useful in a different setting: A two-spine fabric can tolerate one path failure but the application sees blackholing for several minutes after a spine uplink drops. The case being tested is: A customer asks why adding a second spine path does not necessarily double the rate of one elephant-flow TCP session. The governing requirement is to Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs. The most relevant correction is “Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs”.

B:

“Use validated spine-leaf cabling and routing relationships rather than ad hoc lateral transit links” is relevant to a different condition: A team designs a three-stage leaf-spine fabric but wants to connect leaf switches to one another for ordinary transit. The stated question instead concerns: A customer asks why adding a second spine path does not necessarily double the rate of one elephant-flow TCP session. The governing requirement is to Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs. The most relevant correction is “Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs”.

D:

“Repair the routed underlay addressing or protocol configuration and then validate overlay sessions” is associated with a distinct issue: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. By contrast, the actual problem is: A customer asks why adding a second spine path does not necessarily double the rate of one elephant-flow TCP session. The governing requirement is to Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs. The most relevant correction is “Validate resilient ECMP and, if required, test multiple flows or adjust workload distribution within approved designs”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests