mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 26

Question 250

A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. Which evidence most directly verifies the intended network outcome?

  1. Prove the revised blueprint builds with valid allocations and switches converge on intended active state.
  2. Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged.
  3. Confirm no required pending work was silently lost and the correct historical revision became active.
  4. Confirm active blueprint state matches the intended retained revision and critical services recover.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm active blueprint state matches the intended retained revision and critical services recover. The decisive investigation is to inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices. The governing principle is that Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints.

Incorrect Answers

A:

That choice—“Prove the revised blueprint builds with valid allocations and switches converge on intended active state”—addresses this other problem: An engineer wants to return to a blueprint commit created before several resource pool and hardware changes. Here the scenario is: A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints. The direct acceptance evidence is “Confirm active blueprint state matches the intended retained revision and critical services recover”.

B:

“Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged” is associated with a distinct issue: A team wants to undo only the last local edit in Staged without reverting the whole network to an older committed state. By contrast, the actual problem is: A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints. The direct acceptance evidence is “Confirm active blueprint state matches the intended retained revision and critical services recover”.

C:

The option “Confirm no required pending work was silently lost and the correct historical revision became active” is useful in a different setting: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. The case being tested is: A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints. The direct acceptance evidence is “Confirm active blueprint state matches the intended retained revision and critical services recover”.

Question 251

A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. Which controlled change best addresses the described requirement?

  1. Correct the cable plan to use approved physically independent spine paths.
  2. Create or select the approved reusable rack type and instantiate the rack consistently.
  3. Expand spine capacity or rescope rack additions under a supported topology design.
  4. Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate.

Explanation

Correct Answer

D:

This action addresses the stated defect: select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The underlying constraint is that rack type and leaf selection must support the intended redundant attachment topology and host interface roles. Verify rather than assume success: demonstrate both host attachments map to intended leafs and a single leaf loss meets recovery objectives.

Incorrect Answers

A:

“Correct the cable plan to use approved physically independent spine paths” is relevant to a different condition: A dual leaf rack is expected to provide application diversity but both uplinks terminate on the same physical spine. The stated question instead concerns: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The governing requirement is to Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The most relevant correction is “Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate”.

B:

That choice—“Create or select the approved reusable rack type and instantiate the rack consistently”—addresses this other problem: An Apstra design must deploy 12 racks with uniform leaf roles and uplink constraints. Here the scenario is: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The governing requirement is to Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The most relevant correction is “Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate”.

C:

“Expand spine capacity or rescope rack additions under a supported topology design” is associated with a distinct issue: A new tenant floor requests six leaf uplinks but fabric spines are fully committed to existing racks. By contrast, the actual problem is: A storage workload requires dual-homed servers but a proposed rack type provides only one access leaf. The governing requirement is to Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate. The most relevant correction is “Select a supported redundant leaf rack type and document host LAG or independent paths as appropriate”.

Question 252

An Apstra operator sees no current alerts after a telemetry collector became unreachable. Which design or operational principle best explains this behavior?

  1. Apstra event and audit records provide change accountability distinct from raw packet telemetry.
  2. Syslog forwarding can export relevant controller and device operational events for independent correlation and retention.
  3. Monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection.
  4. Controller event logs and deployment records should be correlated with intent revisions and change approvals.

Explanation

Correct Answer

C:

monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection. Here, an Apstra operator sees no current alerts after a telemetry collector became unreachable. A useful discriminating check is to check collector or agent timestamps, sample rates and ingestion connectivity before trusting status.

Incorrect Answers

A:

The option “Apstra event and audit records provide change accountability distinct from raw packet telemetry” is useful in a different setting: An operator needs to explain who committed a change after a rack lost connectivity overnight. The case being tested is: An Apstra operator sees no current alerts after a telemetry collector became unreachable. Monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection. The controlling principle is “Monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection”.

B:

“Syslog forwarding can export relevant controller and device operational events for independent correlation and retention” is relevant to a different condition: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. The stated question instead concerns: An Apstra operator sees no current alerts after a telemetry collector became unreachable. Monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection. The controlling principle is “Monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection”.

D:

“Controller event logs and deployment records should be correlated with intent revisions and change approvals” is associated with a distinct issue: A team needs to identify whether a failed deployment arose from system automation or an approved human change. By contrast, the actual problem is: An Apstra operator sees no current alerts after a telemetry collector became unreachable. Monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection. The controlling principle is “Monitoring conclusions depend on fresh telemetry, so absence of alarms is not proof of healthy collection”.

Question 253

A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Which shortcut would be most likely to undermine this objective?

  1. Assume ECMP must divide every single packet evenly across all active links.
  2. Treat the presence of two physical links as proof that routing automatically reconverges instantly.
  3. Create new tenant VNIs to mask an unresolved underlay routing failure.
  4. Build tenant bridge domains first and ignore missing tunnel endpoint routes.

Explanation

Correct Answer

B:

This is the unsafe shortcut to avoid: treat the presence of two physical links as proof that routing automatically reconverges instantly. It violates the principle that path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. An appropriate alternative is to correct underlay failure detection and routing convergence within the approved topology and timer policy.

Incorrect Answers

A:

“Assume ECMP must divide every single packet evenly across all active links” is associated with a distinct issue: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. By contrast, the actual problem is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The directly relevant unsafe shortcut is “Treat the presence of two physical links as proof that routing automatically reconverges instantly”.

C:

“Create new tenant VNIs to mask an unresolved underlay routing failure” is relevant to a different condition: An additional rack joins a Clos fabric with healthy physical interfaces but fails to form underlay neighbor sessions. The stated question instead concerns: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The directly relevant unsafe shortcut is “Treat the presence of two physical links as proof that routing automatically reconverges instantly”.

D:

That choice—“Build tenant bridge domains first and ignore missing tunnel endpoint routes”—addresses this other problem: A newly installed rack can exchange underlay packets but VTEP loopback routes are missing from the remote leaf routing tables. Here the scenario is: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly. The directly relevant unsafe shortcut is “Treat the presence of two physical links as proof that routing automatically reconverges instantly”.

Question 254

A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. Which initial check would most directly distinguish the likely cause?

  1. Inspect affected probe stages, timestamps and source telemetry along the application path.
  2. Compare live raw telemetry, probe thresholds and application SLOs before and after the change.
  3. Group probe anomalies by affected node and stage, then inspect linked telemetry and topology edges.
  4. Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric.

Explanation

Correct Answer

B:

This checks the relevant evidence first: compare live raw telemetry, probe thresholds and application SLOs before and after the change. The underlying concept is that a cleared threshold alarm alone is not sufficient proof of service recovery; measured data and intent must support the conclusion. After confirming the finding, a controlled remediation is to restore justified monitoring sensitivity and remediate the measured issue instead of hiding it.

Incorrect Answers

A:

That choice—“Inspect affected probe stages, timestamps and source telemetry along the application path”—addresses this other problem: An Apstra dashboard shows probe anomalies while fabric service topology and device reachability stay normal. Here the scenario is: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. The relevant inspection is: Compare live raw telemetry, probe thresholds and application SLOs before and after the change. The most discriminating first check is “Compare live raw telemetry, probe thresholds and application SLOs before and after the change”.

C:

The option “Group probe anomalies by affected node and stage, then inspect linked telemetry and topology edges” is useful in a different setting: A site sees hundreds of anomaly events from one failing uplink and wants to distinguish one root cause from many symptoms. The case being tested is: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. The relevant inspection is: Compare live raw telemetry, probe thresholds and application SLOs before and after the change. The most discriminating first check is “Compare live raw telemetry, probe thresholds and application SLOs before and after the change”.

D:

“Inspect collector timestamps, aggregation window and stage criteria for the derived utilization metric” is relevant to a different condition: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The stated question instead concerns: A data center dashboard becomes green immediately after an engineer increases alert thresholds without addressing failing application traffic. The relevant inspection is: Compare live raw telemetry, probe thresholds and application SLOs before and after the change. The most discriminating first check is “Compare live raw telemetry, probe thresholds and application SLOs before and after the change”.

Question 255

A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Which evidence most directly verifies the intended network outcome?

  1. Confirm topology validation succeeds and the planned rack connections fit the chosen design.
  2. Prove design-stage topology and resource validation before committing to hardware procurement.
  3. Validate that physical port assignments and supported speeds match the rack design without resource conflicts.
  4. Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions.

Explanation

Correct Answer

D:

This directly tests the desired result: show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions. The decisive investigation is to calculate required leaf uplinks and available spine ports for projected growth under the topology template. The governing principle is that capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces.

Incorrect Answers

A:

“Confirm topology validation succeeds and the planned rack connections fit the chosen design” is relevant to a different condition: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. The stated question instead concerns: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The direct acceptance evidence is “Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions”.

B:

That choice—“Prove design-stage topology and resource validation before committing to hardware procurement”—addresses this other problem: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. Here the scenario is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The direct acceptance evidence is “Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions”.

C:

“Validate that physical port assignments and supported speeds match the rack design without resource conflicts” is associated with a distinct issue: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. By contrast, the actual problem is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. The direct acceptance evidence is “Show the design can add the forecast leaf ports without violating supported interface maps or capacity assumptions”.

Question 256

A scheduled rollback would occur while an unrelated approved feature configuration remains uncommitted. Which evidence most directly verifies the intended network outcome?

  1. Confirm no required pending work was silently lost and the correct historical revision became active.
  2. Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged.
  3. Prove the revised blueprint builds with valid allocations and switches converge on intended active state.
  4. Confirm active blueprint state matches the intended retained revision and critical services recover.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm no required pending work was silently lost and the correct historical revision became active. The decisive investigation is to inspect and preserve or commit required pending modifications before initiating a revision jump. The governing principle is that a Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners.

Incorrect Answers

B:

“Confirm the pending diff no longer includes the bad edit and the active blueprint is unchanged” is relevant to a different condition: A designer notices an accidental rack parameter change before any blueprint commit has occurred. The stated question instead concerns: A scheduled rollback would occur while an unrelated approved feature configuration remains uncommitted. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners. The direct acceptance evidence is “Confirm no required pending work was silently lost and the correct historical revision became active”.

C:

That choice—“Prove the revised blueprint builds with valid allocations and switches converge on intended active state”—addresses this other problem: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. Here the scenario is: A scheduled rollback would occur while an unrelated approved feature configuration remains uncommitted. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners. The direct acceptance evidence is “Confirm no required pending work was silently lost and the correct historical revision became active”.

D:

“Confirm active blueprint state matches the intended retained revision and critical services recover” is associated with a distinct issue: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. By contrast, the actual problem is: A scheduled rollback would occur while an unrelated approved feature configuration remains uncommitted. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners. The direct acceptance evidence is “Confirm no required pending work was silently lost and the correct historical revision became active”.

Question 257

A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. Which initial check would most directly distinguish the likely cause?

  1. Inspect and preserve or commit required pending modifications before initiating a revision jump.
  2. Inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices.
  3. Inspect historical identifiers, resource assignments, device availability and supported rollback constraints.
  4. Determine whether the unwanted modification exists only in Staged or in the Active revision.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect historical identifiers, resource assignments, device availability and supported rollback constraints. The underlying concept is that Time Voyager restoration can fail or require reconciliation when historical resource allocations or device identities conflict with current inventory. After confirming the finding, a controlled remediation is to resolve conflicting device and resource mappings before committing a controlled rollback.

Incorrect Answers

A:

“Inspect and preserve or commit required pending modifications before initiating a revision jump” is associated with a distinct issue: A scheduled rollback would occur while an unrelated approved feature configuration remains uncommitted. By contrast, the actual problem is: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. The relevant inspection is: Inspect historical identifiers, resource assignments, device availability and supported rollback constraints. The most discriminating first check is “Inspect historical identifiers, resource assignments, device availability and supported rollback constraints”.

B:

The option “Inspect available retained revisions, current uncommitted changes and the revision's applicability to present devices” is useful in a different setting: An administrator discovers a bad blueprint deployment and needs to restore a prior retained intent state. The case being tested is: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. The relevant inspection is: Inspect historical identifiers, resource assignments, device availability and supported rollback constraints. The most discriminating first check is “Inspect historical identifiers, resource assignments, device availability and supported rollback constraints”.

D:

That choice—“Determine whether the unwanted modification exists only in Staged or in the Active revision”—addresses this other problem: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Here the scenario is: A historical revision would restore a system ID that has been reassigned to another device since it was first recorded. The relevant inspection is: Inspect historical identifiers, resource assignments, device availability and supported rollback constraints. The most discriminating first check is “Inspect historical identifiers, resource assignments, device availability and supported rollback constraints”.

Question 258

A leaf gateway must route a workload's inter-subnet traffic locally rather than always hairpinning through a central aggregation switch. Which evidence most directly verifies the intended network outcome?

  1. Confirm local first-hop forwarding and cross-rack routing continue consistently through each attached leaf.
  2. Confirm both host resolution and inter-subnet routed reachability use the expected EVPN routes.
  3. Confirm routing takes the intended local leaf path and remote tenant prefixes remain correctly reachable.
  4. Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF.

Explanation

Correct Answer

C:

This directly tests the desired result: confirm routing takes the intended local leaf path and remote tenant prefixes remain correctly reachable. The decisive investigation is to inspect the tenant's SVI, gateway placement, host routes and effective Type 2 or Type 5 EVPN advertisements. The governing principle is that edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability.

Incorrect Answers

A:

That choice—“Confirm local first-hop forwarding and cross-rack routing continue consistently through each attached leaf”—addresses this other problem: Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. Here the scenario is: A leaf gateway must route a workload's inter-subnet traffic locally rather than always hairpinning through a central aggregation switch. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. The direct acceptance evidence is “Confirm routing takes the intended local leaf path and remote tenant prefixes remain correctly reachable”.

B:

“Confirm both host resolution and inter-subnet routed reachability use the expected EVPN routes” is associated with a distinct issue: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. By contrast, the actual problem is: A leaf gateway must route a workload's inter-subnet traffic locally rather than always hairpinning through a central aggregation switch. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. The direct acceptance evidence is “Confirm routing takes the intended local leaf path and remote tenant prefixes remain correctly reachable”.

D:

“Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF” is relevant to a different condition: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. The stated question instead concerns: A leaf gateway must route a workload's inter-subnet traffic locally rather than always hairpinning through a central aggregation switch. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability. The direct acceptance evidence is “Confirm routing takes the intended local leaf path and remote tenant prefixes remain correctly reachable”.

Question 259

A designer notices an accidental rack parameter change before any blueprint commit has occurred. Which design or operational principle best explains this behavior?

  1. A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners.
  2. Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints.
  3. Time Voyager restoration can fail or require reconciliation when historical resource allocations or device identities conflict with current inventory.
  4. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision.

Explanation

Correct Answer

D:

reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. Here, a designer notices an accidental rack parameter change before any blueprint commit has occurred. A useful discriminating check is to determine whether the unwanted modification exists only in Staged or in the Active revision.

Incorrect Answers

A:

“A Time Voyager rollback can discard current uncommitted staging and must be coordinated with change owners” is relevant to a different condition: An operator has valuable staged changes when another administrator proposes jumping to an older blueprint revision. The stated question instead concerns: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. The controlling principle is “Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision”.

B:

That choice—“Apstra Time Voyager supports controlled movement to retained blueprint revisions, subject to compatibility and staged-change constraints”—addresses this other problem: A new fabric commit causes service degradation and the team wants to return to a known earlier revision with minimal manual reconstruction. Here the scenario is: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. The controlling principle is “Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision”.

C:

“Time Voyager restoration can fail or require reconciliation when historical resource allocations or device identities conflict with current inventory” is associated with a distinct issue: An engineer wants to return to a blueprint commit created before several resource pool and hardware changes. By contrast, the actual problem is: A designer notices an accidental rack parameter change before any blueprint commit has occurred. Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision. The controlling principle is “Reverting uncommitted edits is distinct from using Time Voyager to select a previously committed blueprint revision”.

Question 260

A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. Which shortcut would be most likely to undermine this objective?

  1. Disable interface telemetry to suppress alerts caused by rising packet errors.
  2. Trigger incidents from a single unvalidated stale sample while discarding the source telemetry.
  3. Match every interface whose label includes the rack number without checking topology relationships.
  4. Raise the anomaly threshold to infinity because the probe currently selects unrelated devices.

Explanation

Correct Answer

D:

This is the unsafe shortcut to avoid: raise the anomaly threshold to infinity because the probe currently selects unrelated devices. It violates the principle that an IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. An appropriate alternative is to narrow the query and probe stages to the correct blueprint nodes and monitored metrics.

Incorrect Answers

A:

The option “Disable interface telemetry to suppress alerts caused by rising packet errors” is useful in a different setting: An operator wants an early-warning signal when fabric interface errors exceed a defined threshold. The case being tested is: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. The directly relevant unsafe shortcut is “Raise the anomaly threshold to infinity because the probe currently selects unrelated devices”.

B:

“Trigger incidents from a single unvalidated stale sample while discarding the source telemetry” is relevant to a different condition: An Apstra analytics pipeline computes a moving aggregate from interface telemetry and compares it with policy thresholds. The stated question instead concerns: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. The directly relevant unsafe shortcut is “Raise the anomaly threshold to infinity because the probe currently selects unrelated devices”.

C:

That choice—“Match every interface whose label includes the rack number without checking topology relationships”—addresses this other problem: A large fabric includes many repeated physical device names and an operator needs the exact topology relationship for one rack. Here the scenario is: A custom IBA stage uses a graph query that accidentally includes all data-center leafs instead of the affected tenant rack. An IBA probe's context and graph selector are essential to interpreting its measurements and anomaly scope. The directly relevant unsafe shortcut is “Raise the anomaly threshold to infinity because the probe currently selects unrelated devices”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests