mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 21

Question 200

A design is staged and rendered correctly, but a production switch still uses the previous running configuration. Which evidence most directly verifies the intended network outcome?

  1. Confirm deployed device state matches the resulting active configuration and authorized baseline.
  2. Confirm active intent, device configuration and required network tests agree on the intended result.
  3. Confirm all affected devices converge on the active blueprint revision without config drift.
  4. Confirm the active revision and target device running configuration reflect the approved change.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm the active revision and target device running configuration reflect the approved change. The decisive investigation is to inspect the Staged, Uncommitted and Active states and per-device deployment status. The governing principle is that staging and rendering intended configuration are distinct from committing and deploying the active blueprint.

Incorrect Answers

A:

The option “Confirm deployed device state matches the resulting active configuration and authorized baseline” is useful in a different setting: An operations team must compare pristine, incremental and rendered configuration views before a planned device update. The case being tested is: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. Staging and rendering intended configuration are distinct from committing and deploying the active blueprint. The direct acceptance evidence is “Confirm the active revision and target device running configuration reflect the approved change”.

B:

“Confirm active intent, device configuration and required network tests agree on the intended result” is relevant to a different condition: A team needs to roll out a fabric change safely but its change record mixes staging a modification with committing the active state. The stated question instead concerns: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. Staging and rendering intended configuration are distinct from committing and deploying the active blueprint. The direct acceptance evidence is “Confirm the active revision and target device running configuration reflect the approved change”.

C:

That choice—“Confirm all affected devices converge on the active blueprint revision without config drift”—addresses this other problem: An operator sees devices in mixed managed states and cannot tell which switches received the new active configuration. Here the scenario is: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. Staging and rendering intended configuration are distinct from committing and deploying the active blueprint. The direct acceptance evidence is “Confirm the active revision and target device running configuration reflect the approved change”.

Question 201

A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. Which initial check would most directly distinguish the likely cause?

  1. Inspect configlet attachment criteria and generated configuration diffs for all matching targets.
  2. Inspect property-set values, consumers and intended scope before updating a shared parameter.
  3. Compare dashboard health with active revision and pending staged configuration diffs.
  4. Review supported configlet scope and possible conflicts with generated native configuration.

Explanation

Correct Answer

D:

This checks the relevant evidence first: review supported configlet scope and possible conflicts with generated native configuration. The underlying concept is that configlets can extend generated device configuration through controlled, scoped supplemental configuration. After confirming the finding, a controlled remediation is to create a narrowly scoped reviewed configlet and validate the resulting generated device configuration.

Incorrect Answers

A:

“Inspect configlet attachment criteria and generated configuration diffs for all matching targets” is associated with a distinct issue: An engineer discovers that a supplemental configuration template was bound to an overly broad tag. By contrast, the actual problem is: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. The relevant inspection is: Review supported configlet scope and possible conflicts with generated native configuration. The most discriminating first check is “Review supported configlet scope and possible conflicts with generated native configuration”.

B:

The option “Inspect property-set values, consumers and intended scope before updating a shared parameter” is useful in a different setting: A blueprint operator maintains repeated data center operational variables that should have a single validated definition. The case being tested is: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. The relevant inspection is: Review supported configlet scope and possible conflicts with generated native configuration. The most discriminating first check is “Review supported configlet scope and possible conflicts with generated native configuration”.

C:

“Compare dashboard health with active revision and pending staged configuration diffs” is relevant to a different condition: A network team needs to distinguish observed operational health from whether the desired blueprint configuration is active. The stated question instead concerns: A proprietary monitoring agent needs device-level CLI configuration not generated by standard Apstra intents. The relevant inspection is: Review supported configlet scope and possible conflicts with generated native configuration. The most discriminating first check is “Review supported configlet scope and possible conflicts with generated native configuration”.

Question 202

A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. Which design or operational principle best explains this behavior?

  1. An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure.
  2. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations.
  3. Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies.
  4. Blueprint object tags and query filters support targeted discovery and operational reporting.

Explanation

Correct Answer

B:

Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. Here, a support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. A useful discriminating check is to inspect anomaly type and affected graph nodes before selecting the next technical investigation.

Incorrect Answers

A:

That choice—“An Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure”—addresses this other problem: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Here the scenario is: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The controlling principle is “Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations”.

C:

The option “Probe anomalies can reflect telemetry thresholds or conditions independently of blueprint service configuration anomalies” is useful in a different setting: A data-center dashboard shows only intent-based analytics alerts for a rising interface discard metric. The case being tested is: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The controlling principle is “Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations”.

D:

“Blueprint object tags and query filters support targeted discovery and operational reporting” is relevant to a different condition: An engineer must report which tenant endpoints carry a specific project tag across multiple racks. The stated question instead concerns: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. The controlling principle is “Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations”.

Question 203

An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. Which initial check would most directly distinguish the likely cause?

  1. Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop.
  2. Inspect per-VRF and per-virtual-network route target communities and import/export decisions.
  3. Compare route distinguishers, route targets and actual VRF import policy for each tenant.
  4. Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF.

Explanation

Correct Answer

D:

This checks the relevant evidence first: inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF. The underlying concept is that EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements. After confirming the finding, a controlled remediation is to correct prefix export/import and next-hop resolution for the routed EVPN IP prefix.

Incorrect Answers

A:

“Inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop” is relevant to a different condition: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. The stated question instead concerns: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. The relevant inspection is: Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF. The most discriminating first check is “Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF”.

B:

That choice—“Inspect per-VRF and per-virtual-network route target communities and import/export decisions”—addresses this other problem: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. Here the scenario is: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. The relevant inspection is: Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF. The most discriminating first check is “Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF”.

C:

“Compare route distinguishers, route targets and actual VRF import policy for each tenant” is associated with a distinct issue: A provider deploys two isolated VRFs containing identical IP prefixes in distinct tenant spaces. By contrast, the actual problem is: An operator advertises an external IPv4 subnet into an EVPN routing domain for routed reachability. The relevant inspection is: Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF. The most discriminating first check is “Inspect Type 5 prefix advertisements, route-target import and resolving next hops for the tenant VRF”.

Question 204

Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Which controlled change best addresses the described requirement?

  1. Grant the minimum documented blueprint role permissions through the approved access-review process.
  2. Restore the supported device-agent connection and management credentials without bypassing security checks.
  3. Select a supported device and image combination and complete controlled onboarding checks.
  4. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits.

Explanation

Correct Answer

D:

This action addresses the stated defect: coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits. The underlying constraint is that centralized intent and change management should distinguish staged edits, reviewed changes and active deployment ownership. Verify rather than assume success: verify each committed change maps to an approved request and attributable operator action.

Incorrect Answers

A:

The option “Grant the minimum documented blueprint role permissions through the approved access-review process” is useful in a different setting: A fabric engineer successfully logs into Apstra but cannot view the blueprint configuration tools needed for a scheduled change. The case being tested is: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits. The most relevant correction is “Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits”.

B:

“Restore the supported device-agent connection and management credentials without bypassing security checks” is relevant to a different condition: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. The stated question instead concerns: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits. The most relevant correction is “Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits”.

C:

That choice—“Select a supported device and image combination and complete controlled onboarding checks”—addresses this other problem: A fabric engineer asks whether a managed switch can simply be added to any blueprint without first validating its NOS and device profile. Here the scenario is: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits. The most relevant correction is “Coordinate change ownership and apply role or process controls to prevent conflicting unreviewed commits”.

Question 205

A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. Which controlled change best addresses the described requirement?

  1. Apply a supported interface map that binds each logical fabric role to the intended physical port.
  2. Choose a compatible interface map or adjust the approved breakout and device profile.
  3. Reallocate the conflicting interface roles to separate supported physical ports.
  4. Use a compatible logical device and device profile combination with sufficient supported host ports.

Explanation

Correct Answer

C:

This action addresses the stated defect: reallocate the conflicting interface roles to separate supported physical ports. The underlying constraint is that a physical interface cannot simultaneously satisfy conflicting logical interface assignments in a validated blueprint. Verify rather than assume success: confirm the design validator has no duplicate port assignments and each link role maps to the intended connector.

Incorrect Answers

A:

“Apply a supported interface map that binds each logical fabric role to the intended physical port” is associated with a distinct issue: A template identifies uplink ports by logical role but a new hardware SKU has different port naming. By contrast, the actual problem is: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. Reallocate the conflicting interface roles to separate supported physical ports. The most relevant correction is “Reallocate the conflicting interface roles to separate supported physical ports”.

B:

The option “Choose a compatible interface map or adjust the approved breakout and device profile” is useful in a different setting: A rack type requests a 100G leaf uplink but the selected switch's physical port profile only exposes that interface as four 25G breakout channels. The case being tested is: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. Reallocate the conflicting interface roles to separate supported physical ports. The most relevant correction is “Reallocate the conflicting interface roles to separate supported physical ports”.

D:

That choice—“Use a compatible logical device and device profile combination with sufficient supported host ports”—addresses this other problem: A rack template chooses a logical device with insufficient server ports for its planned generic systems. Here the scenario is: A fabric build fails because one interface was assigned to both an uplink and a server-facing logical port. Reallocate the conflicting interface roles to separate supported physical ports. The most relevant correction is “Reallocate the conflicting interface roles to separate supported physical ports”.

Question 206

A replacement leaf has a new serial number, but the blueprint still associates the old unavailable hardware with its logical role. Which shortcut would be most likely to undermine this objective?

  1. Assume an SSH prompt proves the device is fully under Apstra management.
  2. Keep duplicate system IDs because the switches belong to the same rack type.
  3. Delete the old blueprint and recreate every tenant because one hardware identifier changed.
  4. Treat the existence of a rendered config file as proof of deployment to every switch.

Explanation

Correct Answer

C:

This is the unsafe shortcut to avoid: delete the old blueprint and recreate every tenant because one hardware identifier changed. It violates the principle that device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. An appropriate alternative is to assign the replacement supported system to the correct logical role using the documented controlled process.

Incorrect Answers

A:

That choice—“Assume an SSH prompt proves the device is fully under Apstra management”—addresses this other problem: A switch is reachable over SSH but Apstra cannot assign it to a blueprint because the device agent is not installed correctly. Here the scenario is: A replacement leaf has a new serial number, but the blueprint still associates the old unavailable hardware with its logical role. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. The directly relevant unsafe shortcut is “Delete the old blueprint and recreate every tenant because one hardware identifier changed”.

B:

“Keep duplicate system IDs because the switches belong to the same rack type” is associated with a distinct issue: Two appliances appear as one managed system after inventory import because their identifiers were copied from a template. By contrast, the actual problem is: A replacement leaf has a new serial number, but the blueprint still associates the old unavailable hardware with its logical role. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. The directly relevant unsafe shortcut is “Delete the old blueprint and recreate every tenant because one hardware identifier changed”.

D:

“Treat the existence of a rendered config file as proof of deployment to every switch” is relevant to a different condition: A design is staged and rendered correctly, but a production switch still uses the previous running configuration. The stated question instead concerns: A replacement leaf has a new serial number, but the blueprint still associates the old unavailable hardware with its logical role. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity. The directly relevant unsafe shortcut is “Delete the old blueprint and recreate every tenant because one hardware identifier changed”.

Question 207

An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. Which design or operational principle best explains this behavior?

  1. Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability.
  2. A distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices.
  3. EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements.
  4. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path.

Explanation

Correct Answer

D:

EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. Here, an engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. A useful discriminating check is to inspect the intended traffic flow and compare Type 2 endpoint routes with Type 5 routed-prefix routes.

Incorrect Answers

A:

“Edge-routed bridging places distributed gateway routing close to attached workloads while preserving EVPN reachability” is relevant to a different condition: An architect wants gateway functions distributed across tenant leafs in an EVPN-VXLAN fabric. The stated question instead concerns: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. The controlling principle is “EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path”.

B:

That choice—“A distributed anycast gateway needs consistent gateway identity and virtual network association across participating leaf devices”—addresses this other problem: Two racks advertise the same distributed gateway virtual address but clients see intermittent first-hop behavior after a deployment. Here the scenario is: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. The controlling principle is “EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path”.

C:

“EVPN Type 5 IP prefix routes represent routed IP reachability, complementing Type 2 endpoint advertisements” is associated with a distinct issue: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. By contrast, the actual problem is: An engineer wants both endpoint reachability and aggregated routed prefixes but is uncertain which EVPN routes serve each purpose. EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path. The controlling principle is “EVPN endpoint and routed-prefix reachability use different route types and their import policy must match the data path”.

Question 208

A team investigates whether a blueprint revision was created by automation or by an administrator. Which controlled change best addresses the described requirement?

  1. Document the causal change and correct the failed deployment through an auditable workflow.
  2. Preserve audit records and review the specific committed change before a controlled correction.
  3. Configure a supported protected syslog destination with the required log categories and retention policy.
  4. Restore data collection and mark stale measurements as unknown rather than healthy.

Explanation

Correct Answer

B:

This action addresses the stated defect: preserve audit records and review the specific committed change before a controlled correction. The underlying constraint is that Apstra event and audit records provide change accountability distinct from raw packet telemetry. Verify rather than assume success: produce a traceable operator or automation event associated with the observed revision and change window.

Incorrect Answers

A:

The option “Document the causal change and correct the failed deployment through an auditable workflow” is useful in a different setting: A team needs to identify whether a failed deployment arose from system automation or an approved human change. The case being tested is: A team investigates whether a blueprint revision was created by automation or by an administrator. Preserve audit records and review the specific committed change before a controlled correction. The most relevant correction is “Preserve audit records and review the specific committed change before a controlled correction”.

C:

That choice—“Configure a supported protected syslog destination with the required log categories and retention policy”—addresses this other problem: A security team needs Apstra events delivered to its central log monitoring platform for long-term investigation. Here the scenario is: A team investigates whether a blueprint revision was created by automation or by an administrator. Preserve audit records and review the specific committed change before a controlled correction. The most relevant correction is “Preserve audit records and review the specific committed change before a controlled correction”.

D:

“Restore data collection and mark stale measurements as unknown rather than healthy” is associated with a distinct issue: An Apstra operator sees no current alerts after a telemetry collector became unreachable. By contrast, the actual problem is: A team investigates whether a blueprint revision was created by automation or by an administrator. Preserve audit records and review the specific committed change before a controlled correction. The most relevant correction is “Preserve audit records and review the specific committed change before a controlled correction”.

Question 209

A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Which design or operational principle best explains this behavior?

  1. Blueprint design inheritance and change management must be validated; editing a design object does not prove all deployed fabrics changed.
  2. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination.
  3. Blueprint design intent must model necessary fabric roles and external connectivity before deployment.
  4. Design-phase resource and topology validation must succeed before a controlled deployment can be trusted.

Explanation

Correct Answer

B:

blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. Here, a team assigns a device image and platform combination not supported by the chosen Apstra reference design. A useful discriminating check is to inspect selected template, interface map, device profile and advertised NOS capabilities.

Incorrect Answers

A:

“Blueprint design inheritance and change management must be validated; editing a design object does not prove all deployed fabrics changed” is associated with a distinct issue: A reference template changes its interface model after three production blueprints have already deployed. By contrast, the actual problem is: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The controlling principle is “Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination”.

C:

“Blueprint design intent must model necessary fabric roles and external connectivity before deployment” is relevant to a different condition: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. The stated question instead concerns: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The controlling principle is “Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination”.

D:

That choice—“Design-phase resource and topology validation must succeed before a controlled deployment can be trusted”—addresses this other problem: A new blueprint shows red validation errors before any managed device has received configuration. Here the scenario is: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination. The controlling principle is “Blueprint templates, device profiles and NOS-specific rendering must align to the supported combination”.

Question 210

A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. Which initial check would most directly distinguish the likely cause?

  1. Inspect the specific service anomaly, affected objects and intended virtual-network configuration and state.
  2. Inspect anomaly type and affected graph nodes before selecting the next technical investigation.
  3. Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state.
  4. Inspect object types, graph relationship properties and returned identities for the intended rack.

Explanation

Correct Answer

B:

This checks the relevant evidence first: inspect anomaly type and affected graph nodes before selecting the next technical investigation. The underlying concept is that Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. After confirming the finding, a controlled remediation is to route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence.

Incorrect Answers

A:

That choice—“Inspect the specific service anomaly, affected objects and intended virtual-network configuration and state”—addresses this other problem: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Here the scenario is: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. The relevant inspection is: Inspect anomaly type and affected graph nodes before selecting the next technical investigation. The most discriminating first check is “Inspect anomaly type and affected graph nodes before selecting the next technical investigation”.

C:

The option “Inspect the probe's monitored metric, stage, threshold and underlying samples before correlating service state” is useful in a different setting: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. The case being tested is: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. The relevant inspection is: Inspect anomaly type and affected graph nodes before selecting the next technical investigation. The most discriminating first check is “Inspect anomaly type and affected graph nodes before selecting the next technical investigation”.

D:

“Inspect object types, graph relationship properties and returned identities for the intended rack” is relevant to a different condition: An operator wants to identify managed nodes by rack and role in the blueprint graph. The stated question instead concerns: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. The relevant inspection is: Inspect anomaly type and affected graph nodes before selecting the next technical investigation. The most discriminating first check is “Inspect anomaly type and affected graph nodes before selecting the next technical investigation”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests