mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 64

Question 630

An alternate uplink remains blocked after the primary path fails because expected BPDUs disappear. Which test result would best confirm a successful fix?

  1. Verification result: The corrected topology converges without opening an Ethernet loop.
  2. Closeout evidence: The intended device is root under the tested priorities and tie-breakers.
  3. Acceptance check: A region status check shows the intended shared instance mapping.
  4. The test confirms that separate tagged tests pass in both permitted VLANs.

Explanation

Correct Answer

A:

Correct diagnosis: Loop protection can prevent unsafe forwarding when control-plane information is missing. The appropriate action is: Inspect spanning-tree loop-protection events, root path and link state. The follow-up evidence required is: The corrected topology converges without opening an Ethernet loop.

Incorrect Answers

B:

The alternative addresses a switch operator treats the highest bridge ID as the guaranteed STP root, not the present root cause. Here the selected correction must reflect loop protection can prevent unsafe forwarding when control-plane information is missing. Test for: The corrected topology converges without opening an Ethernet loop.

C:

This answer would be more suitable when two MSTP switches place the same VLAN into different instances due to region configuration drift, where the corrective action is to align region identity, revision and VLAN mapping as required. The failure here is different: Loop protection can prevent unsafe forwarding when control-plane information is missing. Required validation: The corrected topology converges without opening an Ethernet loop.

D:

This option overlooks the decisive condition. Its supporting principle is mAC table visibility alone does not prove trunk authorization for every VLAN, while this scenario depends on loop protection can prevent unsafe forwarding when control-plane information is missing. Verify the correction with: The corrected topology converges without opening an Ethernet loop.

Question 631

An IS-IS change carries IPv4 traffic but a new IPv6 prefix is missing from a remote PE. Which next action best resolves this observed routing or switching failure?

  1. Corrective action: Distinguish the inner routed payload from outer unicast encapsulation.
  2. Apply this control: Inspect longest-match results and forwarding routes for the specific destination.
  3. Remediation: Inspect IPv6 reachability TLVs, family configuration and active inet6 route state.
  4. Recommended change: Apply longest-prefix-match route lookup to the IPv6 destination.

Explanation

Correct Answer

C:

The case turns on the distinction that dual-stack IS-IS troubleshooting requires family-specific advertisement evidence. Apply this concrete engineering step: Inspect IPv6 reachability TLVs, family configuration and active inet6 route state. An acceptable verification outcome is: The remote PE learns and uses the intended IPv6 prefix.

Incorrect Answers

A:

The proposed principle concerns another network fault: A tunnel can carry inner packet types over an underlay forwarding only the outer header. Here, dual-stack IS-IS troubleshooting requires family-specific advertisement evidence. The most direct correction is to inspect IPv6 reachability TLVs, family configuration and active inet6 route state, confirmed by the remote PE learns and uses the intended IPv6 prefix.

B:

That result would be useful for a different failure, namely: A new IPv6 static backup route is configured but a more-specific route points into a blackhole. The current case specifically calls for: Inspect IPv6 reachability TLVs, family configuration and active inet6 route state. The required observed result is: The remote PE learns and uses the intended IPv6 prefix.

D:

Apply longest-prefix-match route lookup to the IPv6 destination is a relevant step for the separate scenario in which an engineer chooses an IPv6 route based on the printed address alone without comparing prefix length. It does not directly fix this case. Instead inspect IPv6 reachability TLVs, family configuration and active inet6 route state; verify: The remote PE learns and uses the intended IPv6 prefix.

Question 632

An IRB interface is present but an operator assumes it creates a bridge domain automatically. Which combined repair and acceptance criterion is strongest?

  1. Control: Verify VLAN or bridge-domain membership and its L3 IRB binding. Accepted result: The bridge domain and IRB interface share the configured gateway context.
  2. Action: Investigate MAC movement, loops and correct bridge-domain membership. Evidence: The MAC table stabilizes on the authorized port after loop or miswire correction.
  3. Repair: Check whether GRES is paired with the intended GR or NSR support and verify protocol state. Check: A planned switchover test documents forwarding and neighbor behavior against the HA design.
  4. Change: Align untagged or native VLAN behavior with explicit port configuration. Test: The same controlled untagged frame maps to the intended VLAN on both sides.

Explanation

Correct Answer

A:

This is the model-intended best choice because integrated routing bridges a defined L2 domain into an L3 interface when correctly associated. The targeted correction is to verify VLAN or bridge-domain membership and its L3 IRB binding. Validate it by observing that the bridge domain and IRB interface share the configured gateway context.

Incorrect Answers

B:

This option overlooks the decisive condition. Its supporting principle is mAC learning reflects observed source location and may churn during loops or mobility, while this scenario depends on integrated routing bridges a defined L2 domain into an L3 interface when correctly associated. Verify the correction with: The bridge domain and IRB interface share the configured gateway context.

C:

Forwarding-plane continuity does not prove control-plane routing continuity describes a neighboring protocol concern. In this case the controlling fact is integrated routing bridges a defined L2 domain into an L3 interface when correctly associated. A correct remediation would verify VLAN or bridge-domain membership and its L3 IRB binding and demonstrate: The bridge domain and IRB interface share the configured gateway context.

D:

The proposed principle concerns another network fault: Untagged frame classification is local to the receiving interface. Here, integrated routing bridges a defined L2 domain into an L3 interface when correctly associated. The most direct correction is to verify VLAN or bridge-domain membership and its L3 IRB binding, confirmed by the bridge domain and IRB interface share the configured gateway context.

Question 633

A router sees multiple labels on a packet but an engineer only examines the innermost label when troubleshooting transit transport. Which technical distinction best describes the observed symptom?

  1. The key distinction is: A usable IP path need not supply a suitable MPLS LSP or labeled transport path.
  2. Protocol behavior: BGP AS-path information can prevent routes from looping into an AS.
  3. Underlying principle: RSVP LSP setup can fail resource or path constraints even with valid IP reachability.
  4. Root design issue: Outer and inner labels can have distinct transport and service roles.

Explanation

Correct Answer

D:

The case turns on the distinction that outer and inner labels can have distinct transport and service roles. Apply this concrete engineering step: Inspect the full MPLS label stack and outgoing label operation. An acceptable verification outcome is: A capture identifies the label used at each transit stage.

Incorrect Answers

A:

This response would target a different source scenario: A loopback loses its MPLS-resolvable route but ordinary IP routing to the loopback remains reachable. It cannot establish the current acceptance requirement, which is: A capture identifies the label used at each transit stage. The relevant action is: Inspect the full MPLS label stack and outgoing label operation.

B:

Investigate AS-path loop prevention rather than overriding it without risk review is a relevant step for the separate scenario in which a provider advertises a customer prefix with its own AS number already present in the return AS path. It does not directly fix this case. Instead inspect the full MPLS label stack and outgoing label operation; verify: A capture identifies the label used at each transit stage.

C:

The alternative addresses an RSVP-signaled LSP enters a failed state after a link bandwidth change, not the present root cause. Here the selected correction must reflect outer and inner labels can have distinct transport and service roles. Test for: A capture identifies the label used at each transit stage.

Question 634

Layer 2 forwarding is disrupted during Routing Engine replacement even though high availability was enabled for routing. Which protocol behavior most directly determines the correct diagnosis?

  1. The governing rule is: Layer 3 routing HA does not automatically guarantee L2 bridge-control continuity.
  2. The key distinction is: VRRP provides a master and backup mechanism for a shared virtual default gateway.
  3. Protocol behavior: Forwarding-plane continuity does not prove control-plane routing continuity.
  4. Underlying principle: Spanning tree prevents forwarding loops by selecting a loop-free active topology.

Explanation

Correct Answer

A:

Because layer 3 routing HA does not automatically guarantee L2 bridge-control continuity, the best response is to inspect whether nonstop bridging is available and configured for the relevant L2 control plane. A reviewer can close the technical case only after confirming that a controlled switchover retains the expected bridge state and host connectivity.

Incorrect Answers

B:

The proposed principle concerns another network fault: VRRP provides a master and backup mechanism for a shared virtual default gateway. Here, layer 3 routing HA does not automatically guarantee L2 bridge-control continuity. The most direct correction is to inspect whether nonstop bridging is available and configured for the relevant L2 control plane, confirmed by a controlled switchover retains the expected bridge state and host connectivity.

C:

That result would be useful for a different failure, namely: A Routing Engine switchover retains data-plane traffic briefly but causes OSPF adjacencies to restart. The current case specifically calls for: Inspect whether nonstop bridging is available and configured for the relevant L2 control plane. The required observed result is: A controlled switchover retains the expected bridge state and host connectivity.

D:

This response would target a different source scenario: A Layer 2 ring floods broadcast frames repeatedly after an extra cable is connected. It cannot establish the current acceptance requirement, which is: A controlled switchover retains the expected bridge state and host connectivity. The relevant action is: Inspect whether nonstop bridging is available and configured for the relevant L2 control plane.

Question 635

A BGP prefix redistribution into OSPF causes a flood of routes that were not in the approved design. What remediation is most directly applicable?

  1. Apply this control: Confirm the explicit cost plan in a failure rehearsal using route and topology outputs.
  2. Remediation: Constrain redistribution and test route policy acceptance for the intended prefixes.
  3. Recommended change: Restore explicit policy matching and confirm external route advertisements.
  4. Next step: Compare RIB selection with forwarding-table installation and next-hop resolution.

Explanation

Correct Answer

C:

The selected response implements the principle that external OSPF redistribution must be reviewed for scope and scale. The engineer should restore explicit policy matching and confirm external route advertisements. Successful confirmation means: An LSA and route inspection finds only the authorized external prefix set.

Incorrect Answers

A:

The alternative addresses an OSPF route appears longer than expected after failover because a backup link's cost was never verified, not the present root cause. Here the selected correction must reflect external OSPF redistribution must be reviewed for scope and scale. Test for: An LSA and route inspection finds only the authorized external prefix set.

B:

This answer would be more suitable when a provider exports an unexpectedly broad set of routes into OSPF after accepting a generic routing policy, where the corrective action is to constrain redistribution and test route policy acceptance for the intended prefixes. The failure here is different: External OSPF redistribution must be reviewed for scope and scale. Required validation: An LSA and route inspection finds only the authorized external prefix set.

D:

Control-plane route visibility and installed forwarding state are distinct evidence describes a neighboring protocol concern. In this case the controlling fact is external OSPF redistribution must be reviewed for scope and scale. A correct remediation would restore explicit policy matching and confirm external route advertisements and demonstrate: An LSA and route inspection finds only the authorized external prefix set.

Question 636

An ingress router imposes an MPLS label while an engineer expects the same label value to persist unchanged at every hop. Which protocol behavior most directly determines the correct diagnosis?

  1. Underlying principle: Labels have locally significant forwarding meaning on each LSP segment.
  2. Root design issue: RSVP resource reservation may affect which additional constrained LSPs can be admitted.
  3. The governing rule is: Traffic-engineering intent must be reflected in the signaled operational LSP path.
  4. The key distinction is: BGP sessions require sustained TCP connectivity independent of physical interface health.

Explanation

Correct Answer

A:

This option addresses the stated case rather than another networking issue. Principle: Labels have locally significant forwarding meaning on each LSP segment. Remedy: Explain label swap behavior across transit label switching routers. Proof: A hop trace shows the intended push and swap operations along the path.

Incorrect Answers

B:

This response would target a different source scenario: An engineer sees that RSVP signaling succeeded and assumes all reserved bandwidth remains available for other tunnels. It cannot establish the current acceptance requirement, which is: A hop trace shows the intended push and swap operations along the path. The relevant action is: Explain label swap behavior across transit label switching routers.

C:

Review explicit or constraint-based path selection against current resource availability is a relevant step for the separate scenario in which an RSVP tunnel unexpectedly crosses a low-capacity link after a traffic-engineering policy change. It does not directly fix this case. Instead explain label swap behavior across transit label switching routers; verify: A hop trace shows the intended push and swap operations along the path.

D:

The alternative addresses an EBGP peer drops repeatedly after a firewall change despite clean interface counters, not the present root cause. Here the selected correction must reflect labels have locally significant forwarding meaning on each LSP segment. Test for: A hop trace shows the intended push and swap operations along the path.

Question 637

One customer’s new prefixes are advertised to a second unrelated customer via a shared export group. Which evidence would justify closing this troubleshooting case?

  1. The test confirms that the TCP peering session reaches Established and remains stable.
  2. Expected observation: The unauthorized customer receives no leaked prefixes in a route advertisement check.
  3. Verification result: The route-reflector design distributes approved prefixes without unintended loops.
  4. Closeout evidence: A controlled neighbor check reaches Full after configuration correction.

Explanation

Correct Answer

B:

The case turns on the distinction that bGP group-level export policies must preserve customer routing isolation. Apply this concrete engineering step: Split export policy by authorized customer scope and verify negative advertisements. An acceptable verification outcome is: The unauthorized customer receives no leaked prefixes in a route advertisement check.

Incorrect Answers

A:

This option overlooks the decisive condition. Its supporting principle is neighbor state must be traced through transport before modifying route policy, while this scenario depends on bGP group-level export policies must preserve customer routing isolation. Verify the correction with: The unauthorized customer receives no leaked prefixes in a route advertisement check.

C:

The proposed principle concerns another network fault: iBGP scaling mechanisms reduce the full-mesh session requirement. Here, bGP group-level export policies must preserve customer routing isolation. The most direct correction is to split export policy by authorized customer scope and verify negative advertisements, confirmed by the unauthorized customer receives no leaked prefixes in a route advertisement check.

D:

That result would be useful for a different failure, namely: A router sends OSPF Hello packets but remains stuck because the subnet mask differs across neighbors on a broadcast link. The current case specifically calls for: Split export policy by authorized customer scope and verify negative advertisements. The required observed result is: The unauthorized customer receives no leaked prefixes in a route advertisement check.

Question 638

A new IPv6 static backup route is configured but a more-specific route points into a blackhole. What observable result most directly verifies the intended configuration?

  1. Acceptance check: The neighbor table shows the intended level and stable adjacency.
  2. The test confirms that the accepted OSPFv3 IPv6 routes become active in the expected routing table.
  3. Expected observation: A tunnel packet is carried over IPv4 and decapsulated to IPv6 at the endpoint.
  4. Verification result: The intended most-specific route changes to a valid next hop during failover.

Explanation

Correct Answer

D:

This is the model-intended best choice because more-specific routes can override an otherwise healthy IPv6 fallback. The targeted correction is to inspect longest-match results and forwarding routes for the specific destination. Validate it by observing that the intended most-specific route changes to a valid next hop during failover.

Incorrect Answers

A:

Compare interface level settings and area configuration is a relevant step for the separate scenario in which an IS-IS neighbor appears only at Level 2 even though the design expects a Level 1 core segment. It does not directly fix this case. Instead inspect longest-match results and forwarding routes for the specific destination; verify: The intended most-specific route changes to a valid next hop during failover.

B:

The alternative addresses after enabling OSPFv3 a provider sees IPv6 neighbors but no remote IPv6 customer prefixes, not the present root cause. Here the selected correction must reflect more-specific routes can override an otherwise healthy IPv6 fallback. Test for: The intended most-specific route changes to a valid next hop during failover.

C:

This answer would be more suitable when a service provider tunnels IPv6 over an IPv4 core but expects native IPv6 forwarding at every transit hop, where the corrective action is to model endpoint encapsulation and decapsulation for IPv6-over-IPv4 transport. The failure here is different: More-specific routes can override an otherwise healthy IPv6 fallback. Required validation: The intended most-specific route changes to a valid next hop during failover.

Question 639

Two network services use identical customer VLAN IDs and the team assumes their frames must share one L2 broadcast domain. What observable result most directly verifies the intended configuration?

  1. Closeout evidence: The overlapping customer IDs remain isolated within their designated provider services.
  2. Acceptance check: A region status check shows the intended shared instance mapping.
  3. The test confirms that separate tagged tests pass in both permitted VLANs.
  4. Expected observation: The MAC table stabilizes on the authorized port after loop or miswire correction.

Explanation

Correct Answer

A:

The selected response implements the principle that a customer VLAN tag can be scoped by access interface and provider service context. The engineer should separate provider service identification from customer VLAN identifiers. Successful confirmation means: The overlapping customer IDs remain isolated within their designated provider services.

Incorrect Answers

B:

That result would be useful for a different failure, namely: Two MSTP switches place the same VLAN into different instances due to region configuration drift. The current case specifically calls for: Separate provider service identification from customer VLAN identifiers. The required observed result is: The overlapping customer IDs remain isolated within their designated provider services.

C:

This response would target a different source scenario: After a trunk change a MAC address is visible but only one of two VLANs can traverse the uplink. It cannot establish the current acceptance requirement, which is: The overlapping customer IDs remain isolated within their designated provider services. The relevant action is: Separate provider service identification from customer VLAN identifiers.

D:

Investigate MAC movement, loops and correct bridge-domain membership is a relevant step for the separate scenario in which a carrier receives the same source MAC from two access ports and sees frequent forwarding-table moves. It does not directly fix this case. Instead separate provider service identification from customer VLAN identifiers; verify: The overlapping customer IDs remain isolated within their designated provider services.

Question 640

A new OSPF uplink remains down at the adjacency stage after a router replacement. What should the operations engineer do first to address the stated fault?

  1. Apply this control: Review each interface's OSPF metric and compare end-to-end computed costs.
  2. Remediation: Compare area, interface mode, timers, authentication and physical status on both endpoints.
  3. Recommended change: Review route preference before considering equivalent forwarding paths.
  4. Next step: Verify compatible network and Hello parameters including mask where applicable.

Explanation

Correct Answer

B:

Correct diagnosis: Layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. The appropriate action is: Compare area, interface mode, timers, authentication and physical status on both endpoints. The follow-up evidence required is: The corrected link reaches stable Full adjacency and exchanges the intended routes.

Incorrect Answers

A:

This answer would be more suitable when oSPF route preference changes after a new link is added and a latency-sensitive service takes the wrong path, where the corrective action is to review each interface's OSPF metric and compare end-to-end computed costs. The failure here is different: Layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. Required validation: The corrected link reaches stable Full adjacency and exchanges the intended routes.

C:

Route preference determines the selected route before any multipath decision describes a neighboring protocol concern. In this case the controlling fact is layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. A correct remediation would compare area, interface mode, timers, authentication and physical status on both endpoints and demonstrate: The corrected link reaches stable Full adjacency and exchanges the intended routes.

D:

The proposed principle concerns another network fault: OSPF network-type and Hello compatibility can prevent adjacency formation. Here, layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. The most direct correction is to compare area, interface mode, timers, authentication and physical status on both endpoints, confirmed by the corrected link reaches stable Full adjacency and exchanges the intended routes.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests