mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 48

Question 470

A summary route is advertised even though the operator expects every more-specific customer route to remain reachable. What is the primary routing or switching concept illustrated?

  1. Underlying principle: Aggregation can hide individual component failures if advertisement policy is not controlled.
  2. Root design issue: OSPF adjacency requires compatible area and interface parameters.
  3. The governing rule is: Policy-based forwarding can select a routing table independently of the destination lookup in the ingress default table.
  4. The key distinction is: Operational route troubleshooting starts with active state and resolution evidence.

Explanation

Correct Answer

A:

Correct diagnosis: Aggregation can hide individual component failures if advertisement policy is not controlled. The appropriate action is: Distinguish aggregate reachability from specific-route forwarding and test loss of component routes. The follow-up evidence required is: The summary is advertised only under the approved component-route conditions.

Incorrect Answers

B:

The alternative addresses two Junos routers on the same link have mismatched OSPF area identifiers and never form a neighbor relationship, not the present root cause. Here the selected correction must reflect aggregation can hide individual component failures if advertisement policy is not controlled. Test for: The summary is advertised only under the approved component-route conditions.

C:

This answer would be more suitable when a router selects a route in one routing instance while the forwarding policy sends matching traffic into a different table, where the corrective action is to review filter-based forwarding classification and the intended next-table selection. The failure here is different: Aggregation can hide individual component failures if advertisement policy is not controlled. Required validation: The summary is advertised only under the approved component-route conditions.

D:

This option overlooks the decisive condition. Its supporting principle is operational route troubleshooting starts with active state and resolution evidence, while this scenario depends on aggregation can hide individual component failures if advertisement policy is not controlled. Verify the correction with: The summary is advertised only under the approved component-route conditions.

Question 471

A native untagged VLAN mismatch makes two switches place the same untagged frames into different segments. Which protocol behavior most directly determines the correct diagnosis?

  1. Protocol behavior: A trunk carries only its configured authorized VLANs.
  2. Underlying principle: Nonstop bridging protects relevant Layer 2 control-protocol state during switchover.
  3. Root design issue: Untagged frame classification is local to the receiving interface.
  4. The governing rule is: VLAN reassignment must be verified in actual port classification.

Explanation

Correct Answer

C:

The case turns on the distinction that untagged frame classification is local to the receiving interface. Apply this concrete engineering step: Align untagged or native VLAN behavior with explicit port configuration. An acceptable verification outcome is: The same controlled untagged frame maps to the intended VLAN on both sides.

Incorrect Answers

A:

The proposed principle concerns another network fault: A trunk carries only its configured authorized VLANs. Here, untagged frame classification is local to the receiving interface. The most direct correction is to align untagged or native VLAN behavior with explicit port configuration, confirmed by the same controlled untagged frame maps to the intended VLAN on both sides.

B:

That result would be useful for a different failure, namely: An Ethernet service must retain bridge state during Routing Engine failover but only Layer 3 HA settings are considered. The current case specifically calls for: Align untagged or native VLAN behavior with explicit port configuration. The required observed result is: The same controlled untagged frame maps to the intended VLAN on both sides.

D:

Check committed access VLAN settings and operational membership rather than relying on notes is a relevant step for the separate scenario in which an access switch forwards untagged traffic into VLAN 20 after a port is moved to VLAN 30. It does not directly fix this case. Instead align untagged or native VLAN behavior with explicit port configuration; verify: The same controlled untagged frame maps to the intended VLAN on both sides.

Question 472

After a maintenance window a configured customer static prefix is missing from active routes despite no syntax errors. Which root-cause explanation and corrective action fit the case?

  1. Fault mechanism: Load sharing should be evaluated with relevant flows rather than one ping stream. Remediation: Validate forwarding load-sharing configuration and run representative multi-flow traffic.
  2. Root issue: Address validity and martian filtering affect which route sources are considered acceptable. Correction: Review martian-address treatment and justify any carefully scoped exception.
  3. Cause: OSPF normally prefers the least accumulated metric to a destination. Response: Revisit additive path cost and verify SPF outcomes across alternative links.
  4. Diagnosis: Operational route troubleshooting starts with active state and resolution evidence. Action: Inspect the configuration, active route state and next-hop reachability before changing preference.

Explanation

Correct Answer

D:

Because operational route troubleshooting starts with active state and resolution evidence, the best response is to inspect the configuration, active route state and next-hop reachability before changing preference. A reviewer can close the technical case only after confirming that the static route becomes active after the actual next-hop fault is corrected.

Incorrect Answers

A:

This answer would be more suitable when an equal-cost path test sends nearly all flows across one member while both links remain operational, where the corrective action is to validate forwarding load-sharing configuration and run representative multi-flow traffic. The failure here is different: Operational route troubleshooting starts with active state and resolution evidence. Required validation: The static route becomes active after the actual next-hop fault is corrected.

B:

This option overlooks the decisive condition. Its supporting principle is address validity and martian filtering affect which route sources are considered acceptable, while this scenario depends on operational route troubleshooting starts with active state and resolution evidence. Verify the correction with: The static route becomes active after the actual next-hop fault is corrected.

C:

OSPF normally prefers the least accumulated metric to a destination describes a neighboring protocol concern. In this case the controlling fact is operational route troubleshooting starts with active state and resolution evidence. A correct remediation would inspect the configuration, active route state and next-hop reachability before changing preference and demonstrate: The static route becomes active after the actual next-hop fault is corrected.

Question 473

IPv4 IS-IS routing works but IPv6 routes do not appear on a dual-stack backbone. What should the operations engineer do first to address the stated fault?

  1. Remediation: Recognize IS-IS as a link-layer routing protocol with its own PDUs.
  2. Recommended change: Compare Hello/Dead event logs with loss and interface errors before tuning timers.
  3. Next step: Collect protocol adjacency, LSP and routing-table outputs for the affected route.
  4. Corrective action: Check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency.

Explanation

Correct Answer

D:

The case turns on the distinction that iS-IS can convey multiple address families with appropriate support. Apply this concrete engineering step: Check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency. An acceptable verification outcome is: Both address families display their expected prefixes through the same stable topology.

Incorrect Answers

A:

This response would target a different source scenario: A technician tries to diagnose an IS-IS area failure only by inspecting IP multicast Hellos. It cannot establish the current acceptance requirement, which is: Both address families display their expected prefixes through the same stable topology. The relevant action is: Check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency.

B:

Compare Hello/Dead event logs with loss and interface errors before tuning timers is a relevant step for the separate scenario in which several routers report intermittent OSPF neighbor resets on a saturated transit circuit. It does not directly fix this case. Instead check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency; verify: Both address families display their expected prefixes through the same stable topology.

C:

The alternative addresses an IS-IS troubleshooting report shows interface counters only, with no adjacency or link-state evidence, not the present root cause. Here the selected correction must reflect iS-IS can convey multiple address families with appropriate support. Test for: Both address families display their expected prefixes through the same stable topology.

Question 474

An IPv6 BGP route is accepted but cannot be forwarded because its next hop lacks neighbor resolution. Which underlying Junos networking principle explains the failure?

  1. Root design issue: IPv6 link-layer neighbor resolution uses ICMPv6 Neighbor Discovery.
  2. The governing rule is: IPv4 operational success does not prove IPv6 forwarding configuration.
  3. The key distinction is: An IPv6 BGP route requires a resolvable eligible next hop for forwarding.
  4. Protocol behavior: The IS-IS DIS concept applies to LANs rather than ordinary point-to-point links.

Explanation

Correct Answer

C:

Correct diagnosis: An IPv6 BGP route requires a resolvable eligible next hop for forwarding. The appropriate action is: Verify IPv6 next-hop reachability and Neighbor Discovery on the outgoing path. The follow-up evidence required is: The route installs with the expected IPv6 next hop and packet delivery succeeds.

Incorrect Answers

A:

IPv6 link-layer neighbor resolution uses ICMPv6 Neighbor Discovery describes a neighboring protocol concern. In this case the controlling fact is an IPv6 BGP route requires a resolvable eligible next hop for forwarding. A correct remediation would verify IPv6 next-hop reachability and Neighbor Discovery on the outgoing path and demonstrate: The route installs with the expected IPv6 next hop and packet delivery succeeds.

B:

The proposed principle concerns another network fault: IPv4 operational success does not prove IPv6 forwarding configuration. Here, an IPv6 BGP route requires a resolvable eligible next hop for forwarding. The most direct correction is to verify IPv6 next-hop reachability and Neighbor Discovery on the outgoing path, confirmed by the route installs with the expected IPv6 next hop and packet delivery succeeds.

D:

This response would target a different source scenario: An engineer expects an IS-IS Designated Intermediate System election on a point-to-point core link. It cannot establish the current acceptance requirement, which is: The route installs with the expected IPv6 next hop and packet delivery succeeds. The relevant action is: Verify IPv6 next-hop reachability and Neighbor Discovery on the outgoing path.

Question 475

A provider advertises a customer prefix with its own AS number already present in the return AS path. A reviewer requires a remedy and concrete test evidence. Which pairing fits?

  1. Action: Investigate AS-path loop prevention rather than overriding it without risk review. Evidence: The route is accepted only after the AS-path design is corrected.
  2. Repair: Evaluate routing-policy local preference before later BGP path-selection attributes. Check: The intended local preference policy selects the approved egress.
  3. Change: Inspect TCP reachability, permitted port 179, and authentication on the transport path. Test: An authenticated TCP session stays Established after the rule correction.
  4. Implement: Verify compatible network and Hello parameters including mask where applicable. Verify: A controlled neighbor check reaches Full after configuration correction.

Explanation

Correct Answer

A:

The case turns on the distinction that bGP AS-path information can prevent routes from looping into an AS. Apply this concrete engineering step: Investigate AS-path loop prevention rather than overriding it without risk review. An acceptable verification outcome is: The route is accepted only after the AS-path design is corrected.

Incorrect Answers

B:

This answer would be more suitable when two BGP paths have different local preferences and a technician expects the shorter AS path always to win, where the corrective action is to evaluate routing-policy local preference before later BGP path-selection attributes. The failure here is different: BGP AS-path information can prevent routes from looping into an AS. Required validation: The route is accepted only after the AS-path design is corrected.

C:

This option overlooks the decisive condition. Its supporting principle is bGP sessions require sustained TCP connectivity independent of physical interface health, while this scenario depends on bGP AS-path information can prevent routes from looping into an AS. Verify the correction with: The route is accepted only after the AS-path design is corrected.

D:

OSPF network-type and Hello compatibility can prevent adjacency formation describes a neighboring protocol concern. In this case the controlling fact is bGP AS-path information can prevent routes from looping into an AS. A correct remediation would investigate AS-path loop prevention rather than overriding it without risk review and demonstrate: The route is accepted only after the AS-path design is corrected.

Question 476

One LAG member fails silently and the service loses capacity even though the logical interface remains active. Which change best corrects the failure without losing the intended design?

  1. Next step: Review supported mutual exclusivity and select the intended HA control-plane method.
  2. Corrective action: Inspect member states, traffic distribution and configured minimum link expectations.
  3. Apply this control: Remove the incompatible local mode and validate the supported HA configuration.
  4. Remediation: Inspect ABR area configuration, route export rules and summary policy.

Explanation

Correct Answer

B:

Because aggregated links need operational member health monitoring and suitable capacity planning, the best response is to inspect member states, traffic distribution and configured minimum link expectations. A reviewer can close the technical case only after confirming that the fault is visible and surviving members carry traffic within the approved limits.

Incorrect Answers

A:

That result would be useful for a different failure, namely: A provider tries to enable nonstop active routing and graceful-restart mode simultaneously on the same Junos device. The current case specifically calls for: Inspect member states, traffic distribution and configured minimum link expectations. The required observed result is: The fault is visible and surviving members carry traffic within the approved limits.

C:

Remove the incompatible local mode and validate the supported HA configuration is a relevant step for the separate scenario in which an NSR configuration fails commit after an operator adds graceful restart on the same device. It does not directly fix this case. Instead inspect member states, traffic distribution and configured minimum link expectations; verify: The fault is visible and surviving members carry traffic within the approved limits.

D:

The alternative addresses an area border router stops advertising an expected summarized interarea route after a policy change, not the present root cause. Here the selected correction must reflect aggregated links need operational member health monitoring and suitable capacity planning. Test for: The fault is visible and surviving members carry traffic within the approved limits.

Question 477

An LDP-signaled LSP fails when the IGP route to the remote loopback disappears. What operational check demonstrates that the intended outcome occurred?

  1. Acceptance check: The corrected transit hop forwards the expected incoming label to its planned outgoing label.
  2. The test confirms that the restored IGP path permits LDP forwarding to the remote endpoint.
  3. Expected observation: A packet decode identifies label fields separately from the carried IP packet.
  4. Verification result: Traffic uses the primary provider until the documented failover condition occurs.

Explanation

Correct Answer

B:

The case turns on the distinction that lDP label bindings are useful only with a functional path to the FEC next hop. Apply this concrete engineering step: Review LDP dependence on reachability and routing of the transport endpoints. An acceptable verification outcome is: The restored IGP path permits LDP forwarding to the remote endpoint.

Incorrect Answers

A:

This option overlooks the decisive condition. Its supporting principle is end-to-end signaling state alone cannot pinpoint a data-plane label failure, while this scenario depends on lDP label bindings are useful only with a functional path to the FEC next hop. Verify the correction with: The restored IGP path permits LDP forwarding to the remote endpoint.

C:

The proposed principle concerns another network fault: MPLS forwarding typically uses labels to select the next label-switched hop. Here, lDP label bindings are useful only with a functional path to the FEC next hop. The most direct correction is to review LDP dependence on reachability and routing of the transport endpoints, confirmed by the restored IGP path permits LDP forwarding to the remote endpoint.

D:

That result would be useful for a different failure, namely: A policy change unexpectedly makes a backup transit provider carry most outbound traffic. The current case specifically calls for: Review LDP dependence on reachability and routing of the transport endpoints. The required observed result is: The restored IGP path permits LDP forwarding to the remote endpoint.

Question 478

A new OSPF uplink remains down at the adjacency stage after a router replacement. Which test result would best confirm a successful fix?

  1. Closeout evidence: The intended backbone neighbor forms and customer-only passive interfaces remain passive.
  2. Acceptance check: The corrected link reaches stable Full adjacency and exchanges the intended routes.
  3. The test confirms that the test demonstrates loop prevention without advertising false service reachability.
  4. Expected observation: The peers progress to the expected adjacency state and exchange LSAs.

Explanation

Correct Answer

B:

This option addresses the stated case rather than another networking issue. Principle: Layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. Remedy: Compare area, interface mode, timers, authentication and physical status on both endpoints. Proof: The corrected link reaches stable Full adjacency and exchanges the intended routes.

Incorrect Answers

A:

Review the passive-interface configuration and required active neighbor links is a relevant step for the separate scenario in which an OSPF interface is accidentally set passive on a provider edge and its neighbor never appears. It does not directly fix this case. Instead compare area, interface mode, timers, authentication and physical status on both endpoints; verify: The corrected link reaches stable Full adjacency and exchanges the intended routes.

C:

This answer would be more suitable when an engineer deletes an aggregate discard without first checking whether it prevents a transient routing loop, where the corrective action is to compare withdrawal and blackhole behavior under a lab failure before changing the safety route. The failure here is different: Layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. Required validation: The corrected link reaches stable Full adjacency and exchanges the intended routes.

D:

This option overlooks the decisive condition. Its supporting principle is oSPF adjacency requires compatible area and interface parameters, while this scenario depends on layered neighbor troubleshooting should separate transport from OSPF parameter mismatches. Verify the correction with: The corrected link reaches stable Full adjacency and exchanges the intended routes.

Question 479

An Ethernet provider transit receives an untagged subscriber frame on a service meant for tagged traffic. Which technical distinction best describes the observed symptom?

  1. Root design issue: Customer-facing encapsulation must match the traffic format at ingress.
  2. The governing rule is: Nonstop bridging protects relevant Layer 2 control-protocol state during switchover.
  3. The key distinction is: Provider bridging service tags must be applied and removed at the designed boundaries.
  4. Protocol behavior: Layer 2 bridging does not by itself provide IP intersubnet routing.

Explanation

Correct Answer

A:

The selected response implements the principle that customer-facing encapsulation must match the traffic format at ingress. The engineer should set appropriate port mode and tag handling at the service edge. Successful confirmation means: The test frame is accepted only under the approved tagging plan.

Incorrect Answers

B:

That result would be useful for a different failure, namely: An Ethernet service must retain bridge state during Routing Engine failover but only Layer 3 HA settings are considered. The current case specifically calls for: Set appropriate port mode and tag handling at the service edge. The required observed result is: The test frame is accepted only under the approved tagging plan.

C:

This response would target a different source scenario: Tagged frames arrive at the provider edge with the expected inner VLAN but the outer service tag is missing. It cannot establish the current acceptance requirement, which is: The test frame is accepted only under the approved tagging plan. The relevant action is: Set appropriate port mode and tag handling at the service edge.

D:

Deploy or validate an integrated routing and bridging L3 interface and gateway is a relevant step for the separate scenario in which a VLAN provides local host connectivity but hosts cannot reach a different IP subnet through the bridge domain. It does not directly fix this case. Instead set appropriate port mode and tag handling at the service edge; verify: The test frame is accepted only under the approved tagging plan.

Question 480

An operator tries to solve a MAC-learning loop by adding a static IP route in the core. What operational check demonstrates that the intended outcome occurred?

  1. Expected observation: A tagged test frame reaches the approved remote port in the same domain.
  2. Verification result: The same controlled untagged frame maps to the intended VLAN on both sides.
  3. Closeout evidence: A superior BPDU test preserves the intended root with a logged protective state.
  4. Acceptance check: The frame loop is removed and learned MAC locations become stable.

Explanation

Correct Answer

D:

Because layer 2 forwarding loops cannot be reliably corrected through unrelated IP routing alone, the best response is to trace Layer 2 topology, learned MACs and spanning-tree or Ethernet loop defenses. A reviewer can close the technical case only after confirming that the frame loop is removed and learned MAC locations become stable.

Incorrect Answers

A:

This answer would be more suitable when a port belongs to a VLAN but traffic to a remote site is forwarded through a different bridge domain, where the corrective action is to trace frame classification and virtual-switch bridge-domain association. The failure here is different: Layer 2 forwarding loops cannot be reliably corrected through unrelated IP routing alone. Required validation: The frame loop is removed and learned MAC locations become stable.

B:

This option overlooks the decisive condition. Its supporting principle is untagged frame classification is local to the receiving interface, while this scenario depends on layer 2 forwarding loops cannot be reliably corrected through unrelated IP routing alone. Verify the correction with: The frame loop is removed and learned MAC locations become stable.

C:

Customer control traffic must not displace the authorized provider root describes a neighboring protocol concern. In this case the controlling fact is layer 2 forwarding loops cannot be reliably corrected through unrelated IP routing alone. A correct remediation would trace Layer 2 topology, learned MACs and spanning-tree or Ethernet loop defenses and demonstrate: The frame loop is removed and learned MAC locations become stable.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests