mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 35

Question 340

Several VLANs have unexpected root placement under VSTP after port membership changes. Which next action best resolves this observed routing or switching failure?

  1. Remediation: Validate the usable VLAN-ID range and reserved tag values.
  2. Recommended change: Apply suitable BPDU protection according to edge-port policy.
  3. Next step: Inspect interface faults and control-plane events before changing STP timers.
  4. Corrective action: Inspect per-VLAN STP instances and configured priorities, not just a global STP summary.

Explanation

Correct Answer

D:

Correct diagnosis: Per-VLAN spanning-tree behavior can differ across VLANs. The appropriate action is: Inspect per-VLAN STP instances and configured priorities, not just a global STP summary. The follow-up evidence required is: Each tested VLAN elects its approved root and loop-free port roles.

Incorrect Answers

A:

That result would be useful for a different failure, namely: A customer requests VLAN 4096 as an ordinary 802.1Q customer VLAN without checking valid tag IDs. The current case specifically calls for: Inspect per-VLAN STP instances and configured priorities, not just a global STP summary. The required observed result is: Each tested VLAN elects its approved root and loop-free port roles.

B:

This response would target a different source scenario: An edge port connected to a user device unexpectedly receives BPDUs from an unauthorized switch. It cannot establish the current acceptance requirement, which is: Each tested VLAN elects its approved root and loop-free port roles. The relevant action is: Inspect per-VLAN STP instances and configured priorities, not just a global STP summary.

C:

Inspect interface faults and control-plane events before changing STP timers is a relevant step for the separate scenario in which an RSTP uplink continues to flap between discarding and forwarding after an unstable fiber replacement. It does not directly fix this case. Instead inspect per-VLAN STP instances and configured priorities, not just a global STP summary; verify: Each tested VLAN elects its approved root and loop-free port roles.

Question 341

An engineer expects a GRE tunnel to preserve the same maximum payload size as a native Ethernet path. Which evidence would justify closing this troubleshooting case?

  1. Verification result: Both outer endpoint probes and inner traffic succeed after repair.
  2. Closeout evidence: The remote PE learns and uses the intended IPv6 prefix.
  3. Acceptance check: The remote tunnel endpoint is reachable through the intended underlay.
  4. The test confirms that a large packet test respects the effective tunnel MTU without unwanted loss.

Explanation

Correct Answer

D:

The selected response implements the principle that encapsulation reduces effective payload MTU unless transport accommodates the extra headers. The engineer should account for outer IP and GRE header overhead in the MTU design. Successful confirmation means: A large packet test respects the effective tunnel MTU without unwanted loss.

Incorrect Answers

A:

This option overlooks the decisive condition. Its supporting principle is gRE has no independent path if its outer transport becomes unreachable, while this scenario depends on encapsulation reduces effective payload MTU unless transport accommodates the extra headers. Verify the correction with: A large packet test respects the effective tunnel MTU without unwanted loss.

B:

Dual-stack IS-IS troubleshooting requires family-specific advertisement evidence describes a neighboring protocol concern. In this case the controlling fact is encapsulation reduces effective payload MTU unless transport accommodates the extra headers. A correct remediation would account for outer IP and GRE header overhead in the MTU design and demonstrate: A large packet test respects the effective tunnel MTU without unwanted loss.

C:

The proposed principle concerns another network fault: Tunnel interfaces depend on a working underlay path between endpoints. Here, encapsulation reduces effective payload MTU unless transport accommodates the extra headers. The most direct correction is to account for outer IP and GRE header overhead in the MTU design, confirmed by a large packet test respects the effective tunnel MTU without unwanted loss.

Question 342

An operator accepts a source-address block as an ordinary next-hop network even though the address is classified as martian. Which evidence would justify closing this troubleshooting case?

  1. Expected observation: The tenant-specific lookup resolves and the same source-based test reaches its destination.
  2. Verification result: The rejected address remains excluded or a documented narrowly scoped exception is applied.
  3. Closeout evidence: The forwarding entry uses the correct next hop for the active route.
  4. Acceptance check: A neighbor advertising test shows precisely the allowed tagged prefixes.

Explanation

Correct Answer

B:

This option addresses the stated case rather than another networking issue. Principle: Address validity and martian filtering affect which route sources are considered acceptable. Remedy: Review martian-address treatment and justify any carefully scoped exception. Proof: The rejected address remains excluded or a documented narrowly scoped exception is applied.

Incorrect Answers

A:

Run route and connectivity checks in the explicitly intended routing instance is a relevant step for the separate scenario in which a provider PE can ping a customer in the master instance but probes in the tenant routing instance fail. It does not directly fix this case. Instead review martian-address treatment and justify any carefully scoped exception; verify: The rejected address remains excluded or a documented narrowly scoped exception is applied.

C:

This answer would be more suitable when a route appears in the routing table but an engineer assumes its presence proves it was installed into the forwarding table, where the corrective action is to compare RIB selection with forwarding-table installation and next-hop resolution. The failure here is different: Address validity and martian filtering affect which route sources are considered acceptable. Required validation: The rejected address remains excluded or a documented narrowly scoped exception is applied.

D:

This option overlooks the decisive condition. Its supporting principle is bGP group inheritance and policy direction govern which advertisements are modified, while this scenario depends on address validity and martian filtering affect which route sources are considered acceptable. Verify the correction with: The rejected address remains excluded or a documented narrowly scoped exception is applied.

Question 343

After a maintenance window a configured customer static prefix is missing from active routes despite no syntax errors. What observable result most directly verifies the intended configuration?

  1. The test confirms that the tenant-specific lookup resolves and the same source-based test reaches its destination.
  2. Expected observation: The static route becomes active after the actual next-hop fault is corrected.
  3. Verification result: A measured link-quality improvement stabilizes OSPF adjacencies.
  4. Closeout evidence: The rejected address remains excluded or a documented narrowly scoped exception is applied.

Explanation

Correct Answer

B:

The critical observation is: Operational route troubleshooting starts with active state and resolution evidence. Correct it by taking this action: Inspect the configuration, active route state and next-hop reachability before changing preference. Confirm the outcome with: The static route becomes active after the actual next-hop fault is corrected.

Incorrect Answers

A:

The proposed principle concerns another network fault: Instance-aware troubleshooting prevents a successful master-table probe from masking tenant isolation issues. Here, operational route troubleshooting starts with active state and resolution evidence. The most direct correction is to inspect the configuration, active route state and next-hop reachability before changing preference, confirmed by the static route becomes active after the actual next-hop fault is corrected.

C:

This response would target a different source scenario: Several routers report intermittent OSPF neighbor resets on a saturated transit circuit. It cannot establish the current acceptance requirement, which is: The static route becomes active after the actual next-hop fault is corrected. The relevant action is: Inspect the configuration, active route state and next-hop reachability before changing preference.

D:

Review martian-address treatment and justify any carefully scoped exception is a relevant step for the separate scenario in which an operator accepts a source-address block as an ordinary next-hop network even though the address is classified as martian. It does not directly fix this case. Instead inspect the configuration, active route state and next-hop reachability before changing preference; verify: The static route becomes active after the actual next-hop fault is corrected.

Question 344

An aggregated customer advertisement persists while all contributing specifics have withdrawn. What remediation is most directly applicable?

  1. Recommended change: Audit aggregate or generated-route contributors and policy conditions.
  2. Next step: Validate forwarding load-sharing configuration and run representative multi-flow traffic.
  3. Corrective action: Verify route contribution and the conditions for route generation.
  4. Apply this control: Review the passive-interface configuration and required active neighbor links.

Explanation

Correct Answer

A:

This is the model-intended best choice because summary advertisements require validation against their underlying active route policy. The targeted correction is to audit aggregate or generated-route contributors and policy conditions. Validate it by observing that a loss-of-last-contributor test causes the intended summary behavior.

Incorrect Answers

B:

This option overlooks the decisive condition. Its supporting principle is load sharing should be evaluated with relevant flows rather than one ping stream, while this scenario depends on summary advertisements require validation against their underlying active route policy. Verify the correction with: A loss-of-last-contributor test causes the intended summary behavior.

C:

A generated route depends on its contributing-route conditions rather than mere configuration presence describes a neighboring protocol concern. In this case the controlling fact is summary advertisements require validation against their underlying active route policy. A correct remediation would audit aggregate or generated-route contributors and policy conditions and demonstrate: A loss-of-last-contributor test causes the intended summary behavior.

D:

The proposed principle concerns another network fault: Passive OSPF interfaces can advertise networks without forming neighbors on that interface. Here, summary advertisements require validation against their underlying active route policy. The most direct correction is to audit aggregate or generated-route contributors and policy conditions, confirmed by a loss-of-last-contributor test causes the intended summary behavior.

Question 345

One LAG member fails silently and the service loses capacity even though the logical interface remains active. Which statement identifies the key design assumption that failed?

  1. The governing rule is: Per-VLAN spanning-tree behavior can differ across VLANs.
  2. The key distinction is: Conflicting local GR and NSR configuration must be resolved before activation.
  3. Protocol behavior: Aggregated links need operational member health monitoring and suitable capacity planning.
  4. Underlying principle: Link aggregation improves availability only when member links and topology provide meaningful redundancy.

Explanation

Correct Answer

C:

The critical observation is: Aggregated links need operational member health monitoring and suitable capacity planning. Correct it by taking this action: Inspect member states, traffic distribution and configured minimum link expectations. Confirm the outcome with: The fault is visible and surviving members carry traffic within the approved limits.

Incorrect Answers

A:

This response would target a different source scenario: Several VLANs have unexpected root placement under VSTP after port membership changes. It cannot establish the current acceptance requirement, which is: The fault is visible and surviving members carry traffic within the approved limits. The relevant action is: Inspect member states, traffic distribution and configured minimum link expectations.

B:

Remove the incompatible local mode and validate the supported HA configuration is a relevant step for the separate scenario in which an NSR configuration fails commit after an operator adds graceful restart on the same device. It does not directly fix this case. Instead inspect member states, traffic distribution and configured minimum link expectations; verify: The fault is visible and surviving members carry traffic within the approved limits.

D:

This answer would be more suitable when a failover plan relies on one physical interface carrying several links and calls it a redundant LAG, where the corrective action is to distinguish member-link redundancy from a single physical failure domain. The failure here is different: Aggregated links need operational member health monitoring and suitable capacity planning. Required validation: The fault is visible and surviving members carry traffic within the approved limits.

Question 346

An OSPF interface is accidentally set passive on a provider edge and its neighbor never appears. Which technical distinction best describes the observed symptom?

  1. Root design issue: Neighbor discovery can succeed even when database exchange parameters prevent completion.
  2. The governing rule is: Address validity and martian filtering affect which route sources are considered acceptable.
  3. The key distinction is: Multi-area OSPF design requires attention to backbone connectivity.
  4. Protocol behavior: Passive OSPF interfaces can advertise networks without forming neighbors on that interface.

Explanation

Correct Answer

D:

This option addresses the stated case rather than another networking issue. Principle: Passive OSPF interfaces can advertise networks without forming neighbors on that interface. Remedy: Review the passive-interface configuration and required active neighbor links. Proof: The intended backbone neighbor forms and customer-only passive interfaces remain passive.

Incorrect Answers

A:

Neighbor discovery can succeed even when database exchange parameters prevent completion describes a neighboring protocol concern. In this case the controlling fact is passive OSPF interfaces can advertise networks without forming neighbors on that interface. A correct remediation would review the passive-interface configuration and required active neighbor links and demonstrate: The intended backbone neighbor forms and customer-only passive interfaces remain passive.

B:

The proposed principle concerns another network fault: Address validity and martian filtering affect which route sources are considered acceptable. Here, passive OSPF interfaces can advertise networks without forming neighbors on that interface. The most direct correction is to review the passive-interface configuration and required active neighbor links, confirmed by the intended backbone neighbor forms and customer-only passive interfaces remain passive.

C:

That result would be useful for a different failure, namely: A router in a nonbackbone area cannot reach a newly connected area through a topology that skips Area 0. The current case specifically calls for: Review the passive-interface configuration and required active neighbor links. The required observed result is: The intended backbone neighbor forms and customer-only passive interfaces remain passive.

Question 347

A carrier receives the same source MAC from two access ports and sees frequent forwarding-table moves. Which statement identifies the key design assumption that failed?

  1. Underlying principle: Layer 2 isolation depends on bridge-domain and logical switch boundaries.
  2. Root design issue: VRRP provides a master and backup mechanism for a shared virtual default gateway.
  3. The governing rule is: Layer 2 bridging does not by itself provide IP intersubnet routing.
  4. The key distinction is: MAC learning reflects observed source location and may churn during loops or mobility.

Explanation

Correct Answer

D:

The critical observation is: MAC learning reflects observed source location and may churn during loops or mobility. Correct it by taking this action: Investigate MAC movement, loops and correct bridge-domain membership. Confirm the outcome with: The MAC table stabilizes on the authorized port after loop or miswire correction.

Incorrect Answers

A:

The alternative addresses a customer bridge-domain spans two isolated customers due to reusing a virtual switch without tenant boundaries, not the present root cause. Here the selected correction must reflect mAC learning reflects observed source location and may churn during loops or mobility. Test for: The MAC table stabilizes on the authorized port after loop or miswire correction.

B:

This answer would be more suitable when two edge routers advertise one gateway service and an engineer expects both to be virtual master without a redundancy plan, where the corrective action is to review VRRP virtual router roles, priority and failover behavior. The failure here is different: MAC learning reflects observed source location and may churn during loops or mobility. Required validation: The MAC table stabilizes on the authorized port after loop or miswire correction.

C:

This option overlooks the decisive condition. Its supporting principle is layer 2 bridging does not by itself provide IP intersubnet routing, while this scenario depends on mAC learning reflects observed source location and may churn during loops or mobility. Verify the correction with: The MAC table stabilizes on the authorized port after loop or miswire correction.

Question 348

IPv4 IS-IS routing works but IPv6 routes do not appear on a dual-stack backbone. What implementation step and validation result should be selected?

  1. Control: Verify compatible area membership or use the designed Level 2 boundary. Accepted result: The intended Level 1 or Level 2 adjacency forms with the expected topology scope.
  2. Action: Review the passive-interface configuration and required active neighbor links. Evidence: The intended backbone neighbor forms and customer-only passive interfaces remain passive.
  3. Repair: Inspect link quality, interface settings and DIS state before forcing election behavior. Check: A stable neighbor and LAN LSP remain after link faults are corrected.
  4. Change: Check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency. Test: Both address families display their expected prefixes through the same stable topology.

Explanation

Correct Answer

D:

Correct diagnosis: IS-IS can convey multiple address families with appropriate support. The appropriate action is: Check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency. The follow-up evidence required is: Both address families display their expected prefixes through the same stable topology.

Incorrect Answers

A:

That result would be useful for a different failure, namely: An IS-IS adjacency between two provider routers fails because their NET addresses encode incompatible area identifiers for a Level 1 relationship. The current case specifically calls for: Check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency. The required observed result is: Both address families display their expected prefixes through the same stable topology.

B:

This response would target a different source scenario: An OSPF interface is accidentally set passive on a provider edge and its neighbor never appears. It cannot establish the current acceptance requirement, which is: Both address families display their expected prefixes through the same stable topology. The relevant action is: Check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency.

C:

Inspect link quality, interface settings and DIS state before forcing election behavior is a relevant step for the separate scenario in which an IS-IS LAN is unstable after a VLAN move and DIS changes accompany repeated adjacency loss. It does not directly fix this case. Instead check the IPv6 family configuration and advertised reachability rather than rebuilding IPv4 adjacency; verify: Both address families display their expected prefixes through the same stable topology.

Question 349

A router-on-a-stick replacement with IRB stops reachability between a bridge domain and an L3 subnet. Which post-change observation most strongly confirms the correction?

  1. Acceptance check: A test host ARPs or discovers its gateway and routes to the intended subnet.
  2. The test confirms that a source MAC appears on the expected port after a test frame.
  3. Expected observation: The service uses a valid supported customer VLAN ID.
  4. Verification result: After fiber repair the port converges and remains in a stable role.

Explanation

Correct Answer

A:

The critical observation is: IRB depends on both L2 membership and a valid L3 gateway configuration. Correct it by taking this action: Verify VLAN-to-IRB interface binding, addresses and active route entries. Confirm the outcome with: A test host ARPs or discovers its gateway and routes to the intended subnet.

Incorrect Answers

B:

Dynamic MAC tables are populated by observed frames and need not be prefilled describes a neighboring protocol concern. In this case the controlling fact is iRB depends on both L2 membership and a valid L3 gateway configuration. A correct remediation would verify VLAN-to-IRB interface binding, addresses and active route entries and demonstrate: A test host ARPs or discovers its gateway and routes to the intended subnet.

C:

The proposed principle concerns another network fault: 802.1Q VLAN identifiers have reserved values and platform constraints. Here, iRB depends on both L2 membership and a valid L3 gateway configuration. The most direct correction is to verify VLAN-to-IRB interface binding, addresses and active route entries, confirmed by a test host ARPs or discovers its gateway and routes to the intended subnet.

D:

That result would be useful for a different failure, namely: An RSTP uplink continues to flap between discarding and forwarding after an unstable fiber replacement. The current case specifically calls for: Verify VLAN-to-IRB interface binding, addresses and active route entries. The required observed result is: A test host ARPs or discovers its gateway and routes to the intended subnet.

Question 350

An OSPF trace shows Hellos received but database synchronization stalls at ExStart or Exchange. What implementation step and validation result should be selected?

  1. Change: Check MTU and interface compatibility and inspect neighbor-state details. Test: The adjacency advances through database synchronization to Full.
  2. Implement: Inspect the configuration, active route state and next-hop reachability before changing preference. Verify: The static route becomes active after the actual next-hop fault is corrected.
  3. Control: Constrain redistribution and test route policy acceptance for the intended prefixes. Accepted result: Only approved external prefixes appear in the OSPF domain.
  4. Action: Check DR and BDR roles and expected 2-Way peers before changing a healthy segment. Evidence: The segment passes route and database tests with the expected neighbor states.

Explanation

Correct Answer

A:

Correct diagnosis: Neighbor discovery can succeed even when database exchange parameters prevent completion. The appropriate action is: Check MTU and interface compatibility and inspect neighbor-state details. The follow-up evidence required is: The adjacency advances through database synchronization to Full.

Incorrect Answers

B:

The alternative addresses after a maintenance window a configured customer static prefix is missing from active routes despite no syntax errors, not the present root cause. Here the selected correction must reflect neighbor discovery can succeed even when database exchange parameters prevent completion. Test for: The adjacency advances through database synchronization to Full.

C:

This answer would be more suitable when a provider exports an unexpectedly broad set of routes into OSPF after accepting a generic routing policy, where the corrective action is to constrain redistribution and test route policy acceptance for the intended prefixes. The failure here is different: Neighbor discovery can succeed even when database exchange parameters prevent completion. Required validation: The adjacency advances through database synchronization to Full.

D:

This option overlooks the decisive condition. Its supporting principle is oSPF neighbor-state interpretation depends on multiaccess election roles, while this scenario depends on neighbor discovery can succeed even when database exchange parameters prevent completion. Verify the correction with: The adjacency advances through database synchronization to Full.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests