mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

Juniper JN0-364 Questions & Answers

Reliable & Actual Study Materials for JN0-364 Exam Success

69 Questions & Answers with Testing Engine

"JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)" Testing Engine covers all the knowledge points of the real Juniper JN0-364 exam.

The latest actual JN0-364 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-364 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 12

Question 110

Two equal-cost next hops exist but a customer assumes every successive packet must alternate between links. Which change best corrects the failure without losing the intended design?

  1. Apply this control: Distinguish equal-cost multipath from the exact traffic-distribution algorithm used by the forwarding plane.
  2. Remediation: Confirm the explicit cost plan in a failure rehearsal using route and topology outputs.
  3. Recommended change: Review filter-based forwarding classification and the intended next-table selection.
  4. Next step: Inspect the configuration, active route state and next-hop reachability before changing preference.

Explanation

Correct Answer

A:

Correct diagnosis: Multiple eligible forwarding next hops do not guarantee per-packet round-robin use. The appropriate action is: Distinguish equal-cost multipath from the exact traffic-distribution algorithm used by the forwarding plane. The follow-up evidence required is: A controlled flow test verifies the selected load-sharing behavior.

Incorrect Answers

B:

The alternative addresses an OSPF route appears longer than expected after failover because a backup link's cost was never verified, not the present root cause. Here the selected correction must reflect multiple eligible forwarding next hops do not guarantee per-packet round-robin use. Test for: A controlled flow test verifies the selected load-sharing behavior.

C:

This answer would be more suitable when a router selects a route in one routing instance while the forwarding policy sends matching traffic into a different table, where the corrective action is to review filter-based forwarding classification and the intended next-table selection. The failure here is different: Multiple eligible forwarding next hops do not guarantee per-packet round-robin use. Required validation: A controlled flow test verifies the selected load-sharing behavior.

D:

This option overlooks the decisive condition. Its supporting principle is operational route troubleshooting starts with active state and resolution evidence, while this scenario depends on multiple eligible forwarding next hops do not guarantee per-packet round-robin use. Verify the correction with: A controlled flow test verifies the selected load-sharing behavior.

Question 111

A technician treats an OSPF Link State Request as the same message as a Hello packet. A reviewer requires a remedy and concrete test evidence. Which pairing fits?

  1. Action: Check MTU and interface compatibility and inspect neighbor-state details. Evidence: The adjacency advances through database synchronization to Full.
  2. Repair: Differentiate neighbor discovery from database synchronization message types. Check: The packet trace shows each message at its appropriate adjacency stage.
  3. Change: Review filter-based forwarding classification and the intended next-table selection. Test: A trace of matching and nonmatching packets shows the approved lookup table.
  4. Implement: Distinguish internal LSAs from externally originated route information. Verify: The expected redistributed prefix appears with the right OSPF route type.

Explanation

Correct Answer

B:

The critical observation is: OSPF uses distinct Hello, database description, link state request, update and acknowledgment functions. Correct it by taking this action: Differentiate neighbor discovery from database synchronization message types. Confirm the outcome with: The packet trace shows each message at its appropriate adjacency stage.

Incorrect Answers

A:

The proposed principle concerns another network fault: Neighbor discovery can succeed even when database exchange parameters prevent completion. Here, oSPF uses distinct Hello, database description, link state request, update and acknowledgment functions. The most direct correction is to differentiate neighbor discovery from database synchronization message types, confirmed by the packet trace shows each message at its appropriate adjacency stage.

C:

This response would target a different source scenario: A router selects a route in one routing instance while the forwarding policy sends matching traffic into a different table. It cannot establish the current acceptance requirement, which is: The packet trace shows each message at its appropriate adjacency stage. The relevant action is: Differentiate neighbor discovery from database synchronization message types.

D:

Distinguish internal LSAs from externally originated route information is a relevant step for the separate scenario in which a link-state database shows intra-area information but a site expects external routes from an unconfigured redistribution policy. It does not directly fix this case. Instead differentiate neighbor discovery from database synchronization message types; verify: The packet trace shows each message at its appropriate adjacency stage.

Question 112

A transport route is reachable through an IP interface but the LSP still fails due to incomplete label distribution. What implementation step and validation result should be selected?

  1. Control: Inspect outer transport and inner service label handling separately. Accepted result: The test service label is retained and accepted at the target PE.
  2. Action: Distinguish session negotiation from UPDATE message route advertisements. Evidence: A packet trace shows OPEN and KEEPALIVE before accepted UPDATE information.
  3. Repair: Review LDP dependence on reachability and routing of the transport endpoints. Check: The restored IGP path permits LDP forwarding to the remote endpoint.
  4. Change: Differentiate IP underlay reachability from LDP or RSVP control state. Test: The label table and LSP state match the intended forwarding path.

Explanation

Correct Answer

D:

Because mPLS forwarding requires coordinated label signaling and forwarding entries, the best response is to differentiate IP underlay reachability from LDP or RSVP control state. A reviewer can close the technical case only after confirming that the label table and LSP state match the intended forwarding path.

Incorrect Answers

A:

This answer would be more suitable when a customer overlay fails across an MPLS core only for one service label, where the corrective action is to inspect outer transport and inner service label handling separately. The failure here is different: MPLS forwarding requires coordinated label signaling and forwarding entries. Required validation: The label table and LSP state match the intended forwarding path.

B:

This option overlooks the decisive condition. Its supporting principle is bGP message types have separate roles in session formation and reachability exchange, while this scenario depends on mPLS forwarding requires coordinated label signaling and forwarding entries. Verify the correction with: The label table and LSP state match the intended forwarding path.

C:

LDP label bindings are useful only with a functional path to the FEC next hop describes a neighboring protocol concern. In this case the controlling fact is mPLS forwarding requires coordinated label signaling and forwarding entries. A correct remediation would differentiate IP underlay reachability from LDP or RSVP control state and demonstrate: The label table and LSP state match the intended forwarding path.

Question 113

An engineer wants to filter routing information at an IS-IS boundary but applies a policy to the wrong routing context. What operational check demonstrates that the intended outcome occurred?

  1. Acceptance check: The expected IPv6 NLRI is received and becomes an eligible IPv6 route.
  2. The test confirms that the allowed prefixes are present and denied test prefixes are absent.
  3. Expected observation: A link-level packet trace observes the relevant IS-IS PDUs.
  4. Verification result: The report explains the fault from interface through neighbor to selected route.

Explanation

Correct Answer

B:

The selected response implements the principle that policy placement determines which prefixes influence a routing table or advertisement. The engineer should apply and verify supported route policy at the intended routing import or export boundary. Successful confirmation means: The allowed prefixes are present and denied test prefixes are absent.

Incorrect Answers

A:

This response would target a different source scenario: A dual-stack peer is Established but the IPv6 customer route is absent. It cannot establish the current acceptance requirement, which is: The allowed prefixes are present and denied test prefixes are absent. The relevant action is: Apply and verify supported route policy at the intended routing import or export boundary.

C:

The alternative addresses a technician tries to diagnose an IS-IS area failure only by inspecting IP multicast Hellos, not the present root cause. Here the selected correction must reflect policy placement determines which prefixes influence a routing table or advertisement. Test for: The allowed prefixes are present and denied test prefixes are absent.

D:

This answer would be more suitable when an IS-IS troubleshooting report shows interface counters only, with no adjacency or link-state evidence, where the corrective action is to collect protocol adjacency, LSP and routing-table outputs for the affected route. The failure here is different: Policy placement determines which prefixes influence a routing table or advertisement. Required validation: The allowed prefixes are present and denied test prefixes are absent.

Question 114

A router in a nonbackbone area cannot reach a newly connected area through a topology that skips Area 0. What implementation step and validation result should be selected?

  1. Change: Review hierarchical OSPF backbone attachment and area border placement. Test: The planned ABR topology provides verified interarea reachability.
  2. Implement: Distinguish internal LSAs from externally originated route information. Verify: The expected redistributed prefix appears with the right OSPF route type.
  3. Control: Apply and verify supported route policy at the intended routing import or export boundary. Accepted result: The allowed prefixes are present and denied test prefixes are absent.
  4. Action: Compare Hello/Dead event logs with loss and interface errors before tuning timers. Evidence: A measured link-quality improvement stabilizes OSPF adjacencies.

Explanation

Correct Answer

A:

Because multi-area OSPF design requires attention to backbone connectivity, the best response is to review hierarchical OSPF backbone attachment and area border placement. A reviewer can close the technical case only after confirming that the planned ABR topology provides verified interarea reachability.

Incorrect Answers

B:

The proposed principle concerns another network fault: OSPF route type and LSA scope depend on where routing information originates. Here, multi-area OSPF design requires attention to backbone connectivity. The most direct correction is to review hierarchical OSPF backbone attachment and area border placement, confirmed by the planned ABR topology provides verified interarea reachability.

C:

That result would be useful for a different failure, namely: An engineer wants to filter routing information at an IS-IS boundary but applies a policy to the wrong routing context. The current case specifically calls for: Review hierarchical OSPF backbone attachment and area border placement. The required observed result is: The planned ABR topology provides verified interarea reachability.

D:

This response would target a different source scenario: Several routers report intermittent OSPF neighbor resets on a saturated transit circuit. It cannot establish the current acceptance requirement, which is: The planned ABR topology provides verified interarea reachability. The relevant action is: Review hierarchical OSPF backbone attachment and area border placement.

Question 115

A dual-stack peer is Established but the IPv6 customer route is absent. What operational check demonstrates that the intended outcome occurred?

  1. Verification result: A neighbor route view confirms the approved community-tagged routes are sent.
  2. Closeout evidence: Policy based on the intended community alters admission or preference as designed.
  3. Acceptance check: The expected IPv6 NLRI is received and becomes an eligible IPv6 route.
  4. The test confirms that a test packet follows its segment list through installed SR forwarding.

Explanation

Correct Answer

C:

The selected response implements the principle that iPv4 BGP session liveness does not prove IPv6 family route exchange. The engineer should inspect inet6 family negotiation, filters and IPv6 next-hop validity. Successful confirmation means: The expected IPv6 NLRI is received and becomes an eligible IPv6 route.

Incorrect Answers

A:

The alternative addresses a BGP export policy matches a community but no routes leave the peer after a group-level policy reorder, not the present root cause. Here the selected correction must reflect iPv4 BGP session liveness does not prove IPv6 family route exchange. Test for: The expected IPv6 NLRI is received and becomes an eligible IPv6 route.

B:

This answer would be more suitable when an engineer treats a BGP community value as a standalone forwarding next hop, where the corrective action is to differentiate community tags from reachability and forwarding attributes. The failure here is different: IPv4 BGP session liveness does not prove IPv6 family route exchange. Required validation: The expected IPv6 NLRI is received and becomes an eligible IPv6 route.

D:

SR-MPLS can encode forwarding intent using segment labels without per-path RSVP signaling in transit describes a neighboring protocol concern. In this case the controlling fact is iPv4 BGP session liveness does not prove IPv6 family route exchange. A correct remediation would inspect inet6 family negotiation, filters and IPv6 next-hop validity and demonstrate: The expected IPv6 NLRI is received and becomes an eligible IPv6 route.

Question 116

A route to a service PE resolves in inet.0 but cannot resolve to the expected MPLS transport path. What implementation step and validation result should be selected?

  1. Action: Inspect Junos MPLS-related next-hop resolution and available LSP endpoints. Evidence: The remote PE service route resolves over the designated LSP.
  2. Repair: Restore standard AS-path checks and review any justified exception with design authority. Check: An unwanted looped route is rejected in a lab before production change.
  3. Change: Review explicit or constraint-based path selection against current resource availability. Test: An operational path check excludes the unapproved transit link.
  4. Implement: Distinguish prefix-based segment reachability from adjacency-specific forwarding instructions. Verify: A segment trace follows the desired prefix or explicit adjacency.

Explanation

Correct Answer

A:

This option addresses the stated case rather than another networking issue. Principle: A labeled transport next hop must be available to carry the overlay service. Remedy: Inspect Junos MPLS-related next-hop resolution and available LSP endpoints. Proof: The remote PE service route resolves over the designated LSP.

Incorrect Answers

B:

This response would target a different source scenario: A provider accepts a route with its own AS in the received path after a risky bypass of loop prevention. It cannot establish the current acceptance requirement, which is: The remote PE service route resolves over the designated LSP. The relevant action is: Inspect Junos MPLS-related next-hop resolution and available LSP endpoints.

C:

Review explicit or constraint-based path selection against current resource availability is a relevant step for the separate scenario in which an RSVP tunnel unexpectedly crosses a low-capacity link after a traffic-engineering policy change. It does not directly fix this case. Instead inspect Junos MPLS-related next-hop resolution and available LSP endpoints; verify: The remote PE service route resolves over the designated LSP.

D:

The alternative addresses a segment routing node uses a prefix segment but the operator treats it as a local adjacency segment, not the present root cause. Here the selected correction must reflect a labeled transport next hop must be available to carry the overlay service. Test for: The remote PE service route resolves over the designated LSP.

Question 117

An RSVP-signaled LSP enters a failed state after a link bandwidth change. Which corrective action and confirmation pair is most appropriate?

  1. Control: Verify recursive next-hop reachability before relying on the static route. Accepted result: A route lookup shows an active reachable next hop and traffic reaches the customer.
  2. Action: Distinguish prefix-based segment reachability from adjacency-specific forwarding instructions. Evidence: A segment trace follows the desired prefix or explicit adjacency.
  3. Repair: Restore the required transport route and inspect label-signaling and next-hop state. Check: The transport endpoint again resolves and a labeled probe succeeds.
  4. Change: Review reservation constraints and available resources rather than resetting all label sessions. Test: A compatible bandwidth or path choice allows the target RSVP LSP to establish.

Explanation

Correct Answer

D:

The selected response implements the principle that rSVP LSP setup can fail resource or path constraints even with valid IP reachability. The engineer should review reservation constraints and available resources rather than resetting all label sessions. Successful confirmation means: A compatible bandwidth or path choice allows the target RSVP LSP to establish.

Incorrect Answers

A:

This option overlooks the decisive condition. Its supporting principle is a configured static route need not become usable forwarding state when its next hop cannot resolve, while this scenario depends on rSVP LSP setup can fail resource or path constraints even with valid IP reachability. Verify the correction with: A compatible bandwidth or path choice allows the target RSVP LSP to establish.

B:

Different segment types express different routing or link steering semantics describes a neighboring protocol concern. In this case the controlling fact is rSVP LSP setup can fail resource or path constraints even with valid IP reachability. A correct remediation would review reservation constraints and available resources rather than resetting all label sessions and demonstrate: A compatible bandwidth or path choice allows the target RSVP LSP to establish.

C:

The proposed principle concerns another network fault: MPLS relies on selected underlay transport reachability and policy eligibility. Here, rSVP LSP setup can fail resource or path constraints even with valid IP reachability. The most direct correction is to review reservation constraints and available resources rather than resetting all label sessions, confirmed by a compatible bandwidth or path choice allows the target RSVP LSP to establish.

Question 118

A GRE tunnel over an IPv4 core stops passing traffic immediately after an underlay route withdraws. Which next action best resolves this observed routing or switching failure?

  1. Recommended change: Differentiate IP underlay reachability from LDP or RSVP control state.
  2. Next step: Distinguish tunneling encapsulation from confidentiality protection.
  3. Corrective action: Restore underlay endpoint reachability and then validate the inner tunnel route.
  4. Apply this control: Verify instance ownership and route policy at both tunnel endpoints.

Explanation

Correct Answer

C:

Because gRE has no independent path if its outer transport becomes unreachable, the best response is to restore underlay endpoint reachability and then validate the inner tunnel route. A reviewer can close the technical case only after confirming that both outer endpoint probes and inner traffic succeed after repair.

Incorrect Answers

A:

Differentiate IP underlay reachability from LDP or RSVP control state is a relevant step for the separate scenario in which a transport route is reachable through an IP interface but the LSP still fails due to incomplete label distribution. It does not directly fix this case. Instead restore underlay endpoint reachability and then validate the inner tunnel route; verify: Both outer endpoint probes and inner traffic succeed after repair.

B:

The alternative addresses a network operator assumes a GRE tunnel encrypts customer packets merely because they are encapsulated, not the present root cause. Here the selected correction must reflect gRE has no independent path if its outer transport becomes unreachable. Test for: Both outer endpoint probes and inner traffic succeed after repair.

D:

This option overlooks the decisive condition. Its supporting principle is tunneling transport and customer route isolation are separate configurations, while this scenario depends on gRE has no independent path if its outer transport becomes unreachable. Verify the correction with: Both outer endpoint probes and inner traffic succeed after repair.

Question 119

An IRB interface is present but an operator assumes it creates a bridge domain automatically. Which test result would best confirm a successful fix?

  1. Closeout evidence: A source MAC appears on the expected port after a test frame.
  2. Acceptance check: A packet capture shows the intended outer and inner VLAN tags end to end.
  3. The test confirms that each VLAN maps to its intended instance and designated root.
  4. Expected observation: The bridge domain and IRB interface share the configured gateway context.

Explanation

Correct Answer

D:

Underlying cause: Integrated routing bridges a defined L2 domain into an L3 interface when correctly associated. Corrective action: verify VLAN or bridge-domain membership and its L3 IRB binding. Verify the outcome: The bridge domain and IRB interface share the configured gateway context.

Incorrect Answers

A:

The proposed principle concerns another network fault: Dynamic MAC tables are populated by observed frames and need not be prefilled. Here, integrated routing bridges a defined L2 domain into an L3 interface when correctly associated. The most direct correction is to verify VLAN or bridge-domain membership and its L3 IRB binding, confirmed by the bridge domain and IRB interface share the configured gateway context.

B:

That result would be useful for a different failure, namely: A service provider adds a second VLAN tag to customer frames but the downstream switch treats it as an ordinary single tag. The current case specifically calls for: Verify VLAN or bridge-domain membership and its L3 IRB binding. The required observed result is: The bridge domain and IRB interface share the configured gateway context.

C:

This response would target a different source scenario: A data center needs separate spanning trees for VLAN groupings but the plan uses a single root for every VLAN with no design review. It cannot establish the current acceptance requirement, which is: The bridge domain and IRB interface share the configured gateway context. The relevant action is: Verify VLAN or bridge-domain membership and its L3 IRB binding.

Question 120

A network operator assumes a GRE tunnel encrypts customer packets merely because they are encapsulated. What action-and-test pairing directly resolves the case?

  1. Repair: Restore underlay endpoint reachability and then validate the inner tunnel route. Check: Both outer endpoint probes and inner traffic succeed after repair.
  2. Change: Review IPv6 path MTU discovery and endpoint fragmentation requirements. Test: The sender adapts to a validated path MTU and payload delivery succeeds.
  3. Implement: Distinguish tunneling encapsulation from confidentiality protection. Verify: The security design adds an appropriate protected transport where needed.
  4. Control: Account for outer IP and GRE header overhead in the MTU design. Accepted result: A large packet test respects the effective tunnel MTU without unwanted loss.

Explanation

Correct Answer

C:

This option addresses the stated case rather than another networking issue. Principle: GRE by itself does not provide encryption or authenticated confidentiality. Remedy: Distinguish tunneling encapsulation from confidentiality protection. Proof: The security design adds an appropriate protected transport where needed.

Incorrect Answers

A:

This answer would be more suitable when a GRE tunnel over an IPv4 core stops passing traffic immediately after an underlay route withdraws, where the corrective action is to restore underlay endpoint reachability and then validate the inner tunnel route. The failure here is different: GRE by itself does not provide encryption or authenticated confidentiality. Required validation: The security design adds an appropriate protected transport where needed.

B:

This option overlooks the decisive condition. Its supporting principle is intermediate IPv6 routers do not perform ordinary IPv4-style fragmentation of transit packets, while this scenario depends on gRE by itself does not provide encryption or authenticated confidentiality. Verify the correction with: The security design adds an appropriate protected transport where needed.

D:

The proposed principle concerns another network fault: Encapsulation reduces effective payload MTU unless transport accommodates the extra headers. Here, gRE by itself does not provide encryption or authenticated confidentiality. The most direct correction is to distinguish tunneling encapsulation from confidentiality protection, confirmed by the security design adds an appropriate protected transport where needed.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests